End of support for old Solaris releases

I searched the web site, but I couldn't find when Sun will stop supporting older releases (i.e. Solaris 2.6).
Can anyone tell me how I can find out?

Another procedure that has worked well for me over the years.
Go to Sun's web page.
http://www,sun.com
In the top corner of the web page, there is a search area.
Put in keyword eosl (for "end of support life").
The search results will bring up most every topic related
to Sun's philosophies and policies on the subject. More than you'd ever choose to read.
As an example, there were more than 225 search results today.
http://onesearch.sun.com/search/onesearch/index.jsp?qt=eosl&charset=UTF-8
Keyword eol (for "end of life") is also a valid search word,
but produces more than 1500 search results.

Similar Messages

  • End of Support for Netscape web browsers

    Sorry if this has been here before and I missed it....
    "We'll continue to release security patches for the current
    version of
    the browser, Netscape Navigator until February 1, 2008. After
    February
    1, there will be no more active product support for Navigator
    9, or
    any previous Netscape Navigator browser. This includes
    Netscape
    v1-v4.x, Netscape v6, Netscape v7 Suite, Netscape Browser v8,
    and
    Netscape Navigator/Messenger 9."
    http://blog.netscape.com/2007/12/28/end-of-support-for-netscape-web-browsers/
    ~Malcolm N....
    ~

    What's Netscape? :)
    Kind Regards
    Paul Dell
    An Eye of Menorca
    www.dellimages.com
    Blog
    www.paul-dell.com
    "Malcolm N_" <[email protected]> wrote in message
    news:[email protected]..
    >
    > Sorry if this has been here before and I missed it....
    >
    > "We'll continue to release security patches for the
    current version of
    > the browser, Netscape Navigator until February 1, 2008.
    After February
    > 1, there will be no more active product support for
    Navigator 9, or
    > any previous Netscape Navigator browser. This includes
    Netscape
    > v1-v4.x, Netscape v6, Netscape v7 Suite, Netscape
    Browser v8, and
    > Netscape Navigator/Messenger 9."
    >
    >
    >
    http://blog.netscape.com/2007/12/28/end-of-support-for-netscape-web-browsers/
    > --
    >
    > ~Malcolm N....
    > ~

  • End of support for Panther?

    Hi,
    I am looking for information as when does Apple plan to discontinue its support for Panther? Any information or relevant link for end of support for product is welcome.
    Thanks in advance,
    -asin
      Mac OS X (10.3.4)  

    asin,
    It's "support" has reached its conclusion with the release of the last 10.3.9 update.
    The operating system will not be updated past that.
    I recommend downloading the latest update, as I see you are using 10.3.4, (10.3.9 Combo) and I think you will see a marked improvement to your OS. Remember to Repair Permissions from Disk Utility before and after any OS update.
    good luck,
    littleshoulders [:-)

  • End of support for BO XI R3 SP5

    Hi, Please anyone can tell me when is end of support for BO XI R3 SP5 as per SAP officials. I read existing threads, few tell March'2013 and few tell March'2015. I will appreciate the correct and exact reply. Thanks Akash

    Better to raise a message to SAP support in SMP.

  • End of support for DB version 10g r2

    Hi All,
    can any 1 tell me till when we have Extended end of support for below versions
    Oracle 10g r2 Database  10.2.0.3
    Oracle 10g R2 Application server  10.1.2.0.2
    Oracle 10g R2 Client 10.2.0.4
    Oracle 10g R2 Forms & reports developer tool set  10.1.2.0.2
    Oracle 10g client (desktop) 10.2.0.4
    Thanks & regards. 

    You'll can find information under:
    https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000632622&
    SEM 4.0 is in NW2004, do the end of Maintenance in March 2010. The extended Maintenance in March 2013
    Others info in:
    https://websmp106.sap-ag.de/upgrade-nw
    Regards,
    Sergio

  • Does intel latest  mother boareds support for the Solaries 10 OS

    Hello Friends this is Mr.MA.Prakash from India. I want to know intel latest mother boards not supporting solaries 10. i tried installing on some intel mother board numbers.
    please suggest, which intel latest mother board support for the solaries 10 operating system.
    thanking u.
    ma.prakash.

    I've had a fun time last week setting up an Intel MFSYS25 blade server and MF5000SI quad-core Xeon blades with Solaris 10.
    I only had Solaris 10u4 (8/07) on hand, and it only worked in 32-bit mode (boot with kernel/unix explicitly specified, as in Safe mode descriptor).
    However adding patches (back from Jan 2008) helped, and the system works fine in 64-bit mode.
    I believe it should work with Solaris 10u5 since it includes these patches and newer ones, but haven't checked.

  • Support for Old Vibrating Sample Magnetometers

    Hello.
    I am a relative newcomer to LabView and I am trying to get some support for a few older Vibrating Sample Magnetometers (VSM) on behalf of my employer.  These machines are quite old and, although they have GPIB connectivity, I am having difficulty in being able to control them using LabView.  Although they use the IEEE-488 GPIB standard, they were built before the introduction of the Standard Commands for Programmable Instruments (SCPI), rather than the newer 488.2 standard.  As such, they work with their own proprietary commands, which are proving impossible to find.  I have a working LabView program that was written by a university student for a master's degree in physics.  However, I cannot communicate with the individual components, such as the gaussmeter, power supply, etc, using measurement and automation explorer.  They don't even respond to an "*IDN?" query without timing out, which I thought was standard.  I have tried lengthening the timeout time and tried to use drivers for similar instruments.  My question to anyone out there is, do you have the drivers or the programming manual for any of the components listed below?  The Vibrating Sample Magnetometers were built by the now defunct DMS/ADE.  The current owners of DMS/ADE can offer little support for such old equipment.  Likewise, is there something else I can try in lieu of these drivers and commands? 
    Devices:  1.) DMS Model 1660 VSM, 2.) DMS/ADE VSM Model 4, which includes the DMS/ADE model 32KP gaussmeter with its own GPIB port.
    Thank you for your time,
    Liam

    Hi Liam,
    As per GPIB 488.2, as I already mentioned, the ibEOSchar under Ibconfig is an 8 bit value so it will take value from 0 to 255 for which 3 number width is sufficient. Measurement and Automation Explorer also works in the same way. EOS byte value under Termination Settings section of GPIB settings accepts a decimal number from 0 to 255 and it will not allow any character and also value more than 255 as its field is limited to 3 numbers and even if you enter a value more than 255, it will be automatically changes to 255.
    So, As per 488.2, You cannot give both carriage return and linefeed characters together and you cannot use the same in MAX also.
    Try framing your entire command with EOS as per built in LabVIEW carriage return and linefeed functions and use GPIB Write.vi to send this entire frame. It may work.
    Also, I would like to see your VSM's communication manual and understand how these commands have been implemented.
    Coming to IBEOS command, its easily understandable and its used to Configure the end-of-string (EOS) termination mode or character. It have low byte and high byte.
    Low byte is always an 8 bit EOS character and high byte can take three forms which are A, B and C. Also High byte can have values with combination of A,B or C.
    For Example, ibeos (ud, 0x140A); means, Configure the software to end reads on newline character (hex 0A) for the unit descriptor. Here high byte is a combination of A and C where as low byte is the HEX equivalent of ASCII Line feed character.
    Regards,
    Naresh Narra

  • Support for older Solaris?

    Hello,
    Looking at the specs for the newer Sun boxes coming out, they all say that the minimum supported OS is Solaris 10.
    Is it Sun's intent to discontinue the ability to run older versions (8/9) on the newer hardware?
    thx!

    Some of the newer Sun systems like the x64 X4100 for example have an entirely new architecture than that which the earlier versions of Solaris was developed for, If you use this link you can see the supported versions of Solaris for that system:
    http://sunsolve.sun.com/handbook_pub/Systems/SunFireX4100/Su nFireX4100.html
    The same can be said for the T1 powered systems eg. the T2000 only supports Solaris 10 at this time:
    http://sunsolve.sun.com/handbook_pub/Systems/SunFireT2000/Su nFireT2000.html
    Some of the more traditional SPARC based systems that have been under continuous development eg. the SF E2900 continue to support earlier versions of Solaris:
    http://sunsolve.sun.com/handbook_pub/Systems/E2900/E2900.htm l
    Can I ask what systems you are interested in?

  • End of Support for TUxedo10gR3

    Hi does anyone know when the end of Premier Support is for Oracle Fusion Tuxedo 10gR3 and is there a link to the support table?

    Hi,
    Premier Support for Tuxedo 10.3 ended January this year.
    The document I guess you're looking for can be found here:
    http://www.oracle.com/us/support/library/lifetime-support-middleware-069163.pdf (look at page 11 for facts about Tuxedo 10.3).
    Hope this helps,
    /Per

  • AXAJ: support for old versions of browsers?

    Technilac preview version supports IE7, FireFox2 only.
    Are there plans for supporting old versions in future?

    IE 6.x support for ADF faces rich-client components..
    (there is no plan yet to support IE 6)

  • HP claims ASU support for old HP printer OS X 10.8.3 not recognizing

    Hello,
    I am running OS X 10.8.3 on my Mac Pro and I want to use my old HP Laserjet 3100 to print-only. The following HP Support Document link claims this printer has print-only support from ASU:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03411613
    I followed all instructions to install the latest "HP Printer Drivers v.2.13 for OS X", and Add the printer via System Preferences/Print & Scan/+, yet the printer is not listed in the Printer Software list.
    Is anyone aware of a solution that you would please share with me?
    Thank You!!!

    Thanks you for the replies. Greg's reply helped me make progress: the generics did not work, but installing the Linux hpijs and the two additional required downloads led the driver to automatically appear as the driver to "Use" when I went to "Add" the printer.
    Unfortunately, that is where the progress ended. Nothing I try to print appears in the Print Queue or prints. The printer is "Ready" and I have tried everything I can in "Printer not Working" link Eric included above.
    Any suggestions?
    Thank You!

  • DOS PCMCIA support for old Compaq Armada 1571DM

    Hi there,
    I have recently purchased an old Compaq Armada 1571DM for a project I'm currently in, which requires both portability and the availability of a couple of COM (serial) ports. The laptop comes with a single serial port, so I thought to add the second one I need via a PCMCIA to serial card adapter. So I purchased one of these too.
    The problem I faced is that the software I use to access the serial ports runs on DOS only, and as far as I could find on the internet, there seems to be no DOS driver/card enabler for this particular laptop.
    I'll very much preciate your help, as I'm stuck on this issue for a long time now, and I really need to make it work.
    Thank you very much.
    Best regards.
    PS.: under Windows 98 everything seems to work: PCMCIA sockets are detected, and PCMCIA adapter is properly recognized and installed thru its provided drivers.

    Hi:
    You may also want to post your question on the HP Business Support Forum -- Armada notebook section.
    There is a member there (Rainald Taesler) that knows everything about those relics.  If he can't help you no one can.
    http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-EliteBook/bd-p/bsc-274

  • End of support for AD functional level?

    Has anyone ever seen something from Microsoft regarding their support policy for AD functional levels?
    Should one assume that since Windows Server 2003 support will end in July 2015, that this would indicate that the "Windows Server 2003" domain and forest functional levels would also become unsupported at that time?

    Hi,
    As far as i know the forest and domain functional levels don't have a support lifecycle. 
    The FFL and DFL only enable new features in the new domain. So i don't think it is really something that can be put into a support contract as such and therefor doesn't have a support lifecycle associated with it. 
    Thanks
    Denis
    Regards,
    Denis Cooper
    MCITP EA - MCT
    Help keep the forums tidy, if this has helped please mark it as an answer
    Blog: http://www.windows-support.co.uk 
    Twitter:   LinkedIn:

  • Support for juno kilo release

    When will the openstack for oracle linux distribution support Juno and Kilo (due this month) releases?   Can I deploy Juno or Kilo on Oracle linux manually now?

    Bob Edison wrote:
    We're hoping to upgrade from Oracle 9.0.1 to release 2 using the Oracle thick (oci)
    driver for release 2. Does BEA support this environment?Hi. If you're using Oracle's own type-2 dirver, then yes, absolutely we'll support it.
    We will operate with any JDBC driver to any DBMS, as long as the driver
    is threadsafe and substantially implements the JDBC specification. If you are
    talking about our type-2 driver, then someone closer to our driver development
    will answer about our driver.
    Joe

  • Logic Pro X offers support for old keyboards?

    from Apple's website: "Control Surface Support: Korg: Kontrol49, microKontrol"  Is this really the only keyboard controllers that the new Logic Pro X is supporting? I can only find these on ebay. Any recommendations for a keyboard controller?

    Remember, 'Support' doesn't actually mean that this is a complete list of controllers that will work. It's simply a selection of presets containing pre-assigned MIDI controls, a bit like you telling an electronic drumkit to play C3 when you hit the kick etc.
    Most controllers have a 'Mackie Control mode' that change the assignements in the controller to ones identical to the Mackie control and thus work with the Mackie Control preset. Nealy all the rest have presets online that can be added to the list and used.

Maybe you are looking for

  • Unable to Start Listner for 10g R2 after windows xp pro restart. Please!

    Database worked just fine until a system reboot after installing the Apache server and Apex 2.2 The service start and I'm able to connect to the database SQL*PLUS without specifying the host string SQL*PLUS User Name: xxxxx Password : xxxxx Host Stri

  • Compare Two Structures or Itab at Runtime

    Hi Experts; I want to do compare two structures or itabs in my program at runtime. I will give two structures or itab names and I want to get difference between two structures names or itabs. I know Diff Screen of ABAP Debug . I want to make same pro

  • Illustrator CS6 crashes when saving or printing

    A couple weeks ago, my AI CS6 started crashing when saving complex line work (Rhino Make2D exports) or when I tried to check the printer setting. I've reinstalled AI and installed the latest updates. For a few days, the saving problem went away but i

  • Ipod and i tunes  don't communicate

    well it says that the software for communicating with the iPod is not installed correctly.Please reinstall itunes to install the iPod's software and I did it but it still does not communicate.   Windows XP  

  • Inbound 855 EDI PO Acknowledgement Transaction

    We are trying to take an 855 EDI PO Acknowledgement Transaction, and have the price on the PO and the delivery date on the PO automatically change. When we process the IDoc for the 855 EDI PO acknowledgement, we can see that the new delivery date is