End point behavings of Dial controls

How do I prevent a Dial Control from continuing past the end points (Switching directly from maximum to minimum or vice versa.)

Mamako says you cannot disable this behavior. It is just the way LabVIEW works.

Similar Messages

Problem setting project end point (can't access the end point marker)

I can't seem to set my project end point because the slider control that adjusts the spacing of the measures is obstructing my pointer from being able to click on the end point marker. Any hints as to how I can move the coation of this slider control so that I can access the end point marker with my pointer?

6ftmama wrote:
FYI - the end point marker now turns into a bracket when you hover over it.
THe End-of-Project Marker doesn't change at all. What you see is a change of the Mouse Pointer.
This is called a "Click Zone" where the Mouse Pointer changes to different shapes when moving over or click on an object or an area in the window.
Here the Mouse Pointer changes to "Trim Tool" or "Resize Tool".
Pointer Tool:
Resize Tool:
It is the same Tool wne you move the Mouse Pointer of the right edge of a Region to resize its length.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Custom Control Help: Draw a line and output start and end points

I'm looking to find or make a custom control (or simple subVI) that will appear as a 100x100 unit grid and allow me to draw a line from one point to another on that grid. It will then output the (x,y) of the starting and end point of that line on the grid. Any help or ideas?
Thanks,
Steve
LabVIEW 2009 SP1
Solved!
Go to Solution.

What you basically want is a loop with an event structure where you process Mouse Down, Move and Up events for your controls. There are any number of ways of implementing something like this, but this one will probably be the simplest:
Use a multicolumn listbox or a table for your grid. Hide the scrollbars and headers.
You can use the ActiveCell property with -2,-2 to select all cells. You can then use the cell size property to set the exact size of the cell.
Next, you put a picture control on top of the table and color its background transparent so that the table shows through. You use property node to make sure the two are aligned to exactly the same spot and size.
You use the mouse events on the picture control to detect the clicks and moves.
You use the table's Point to Row Column method to translate the event's position data to a cell.
You use the picture control VIs to draw the line on the picture based on that data.
You can even color the selected cells in the table using the table properties.
If you want to simplify things somewhat, you can also use the timeout event instead of the Mouse Move event to draw the line, but then you'll need to keep the timeout value in a shift register and reset it to -1 (no timeout) when the Mouse Up event happens.
I would also suggest processing Mouse Enter and Leave events to change the cursor and cancel if the user leaves in the middle of dragging.
Try to take over the world!

PSTN to Lync end points

Hi everyone,
our setup is PSTN to Mediatrix to Lync which works well.
I can dial out from Lync end point to the PBX/PSTN local, long distance and International
However I can receive calls to the Lync end point.
My URL address in Lync control panel is +1234567891;ext=7xxx
If it works one way shouldn't it work the other way.
I have heard of something called RNL ( reverse number lookup ) but how does this apply to myt set up.
Please assist.

Hi,
The Inbound call issue often caused by lack of voice route or some wrong configuration on the Trunk configuration such as translation rule or pattern, would you please check the following link about trunk deployment?
http://technet.microsoft.com/en-us/library/gg398755.aspx
Which protocol did you use (TLS or TCP)?
IF you use TCP, please double check if you defined the port correctly when defining the gateway in the Lync topology builder.
More details:
http://technet.microsoft.com/en-us/library/gg398833.aspx
Please also make sure the dial plan is correct. All phone numbers coming inbound to Lync should be normalized to the E.164 format.
If the issue persists, you can use the Lync server logging tool on FE server and Mediation server.
Here is the link of using the Lync logging tool:
http://blog.schertz.name/2011/06/using-the-lync-logging-tool/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found
there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Playing Quicktime with Multiple Start End Points

Hello
I posted a message a few days which I received help on
regarding starting and ending a Quicktime movie from various points
in the movie. Now I have a new problem which I cannot fix at all..
Here is the problem:
I have a Quicktime movie on stage and 10 various buttons that
contain a generic script which allows input of start and end points
for each button to trigger the movie. Initially just doing this
with one button is successful.
However, multiple buttons all with the same generic code make
the movie freeze up completely. My guess is that they are all
fighting each other for control. Maybe I need something in the code
which allows the button that is being used to play the movie to
keep control.
Here is the code I use for each button, the movie is on frame
15.
property pQT,pStart,pEnd,pFrame, pVolume
on beginSprite me
sprite(me.spriteNum).color=rgb (255,255,255)
cursor 0
if integer(pQT).ilk=#integer then pQT=integer(pQT)
end
on mouseUp me
sound(3).volume=sprite(15).volume
sprite(15).volume=pVolume
sprite(pQT).movieTime=pStart
sprite(pQT).movieRate=1
cursor 0
end
on mouseEnter me
sprite(me.spriteNum).color=rgb (173,24,41)
sprite(me.spriteNum).cursor=280
end
on mouseLeave me
sprite(me.spriteNum).color=rgb(255,255,255)
sprite(me.spriteNum).cursor=0
end
on mouseDown me
sprite(me.spriteNum).cursor=290
end
on enterFrame me
if sprite(pQT).movieTime>=pEnd then
sprite(pQT).movieRate=0
end if
end
on getPropertyDescriptionList me
if not the currentSpriteNum then exit
vPDList=[:]
setaProp vPDList, #pQT, [#comment: "Which QT sprite",
#format: #integer, #default: 0]
setaProp vPDList, #pStart, [#comment: "Range start",
#format: #integer, #default: 0]
setaProp vPDList, #pEnd, [#comment: "Range end", #format:
#integer, #default: 0]
setaProp vPDList, #pVolume, [#comment: "Volume", #format:
#integer, #default: 0]
return vPDList
end getPropertyDescriptionList
Any help is much appreciated. (not a lingo expert)
Andy

Many thanks Mike
Works fantastically.
I just thought I would post the finished code - well, tweaked
ever so slightly from Mike's orginal for anybody wanting a nice
little behaviour for controlling a Quicktime movie.
(watch out for page breaks etc - should be 68 lines)
property pQT,pStart,pEnd,pFrame,
pVolume,pMyControl,pReturnMarker
on beginSprite me
sprite(me.spriteNum).color=rgb (255,255,255)
cursor 0
if integer(pQT).ilk=#integer then pQT=integer(pQT)
pMyControl=0
end
on mouseUp me
sound(3).volume=sprite(pQT).volume
sprite(pQT).volume=pVolume
sprite(pQT).movieTime=pStart
sprite(pQT).movieRate=1
pMyControl=1
cursor 0
end
on mouseEnter me
sprite(me.spriteNum).color=rgb (173,24,41)
sprite(me.spriteNum).cursor=280
end
on mouseLeave me
sprite(me.spriteNum).color=rgb(255,255,255)
sprite(me.spriteNum).cursor=0
end
on mouseDown me
sprite(me.spriteNum).cursor=290
end
on enterFrame me
if pMyControl then
if sprite(pQT).movieTime>=pEnd then
sprite(pQT).movieRate=0
pMyControl=0
go pReturnMarker
end if
end if
end
on getPropertyDescriptionList me
if not the currentSpriteNum then exit
vPDList=[:]
setaProp vPDList, #pQT, [#comment:"Which QT sprite",
#format:#string, #default:0]
setaProp vPDList, #pStart, [#comment:"Range start",
#format:#integer, #default:0]
setaProp vPDList, #pEnd, [#comment:"Range end",
#format:#integer, #default:0]
setaProp vPDList, #pVolume, [#comment:"Volume",
#format:#volume, #default:0]
setaProp vPDList, #pReturnMarker, [#comment:"Return to
Marker", #format:#marker, #default:0]
return vPDList
end getPropertyDescriptionList

My pointer is out of control. Jumps around the page and opens windows ands apps at random. How can I fix this?

Help. My pointer is out of control. It hardly responds to the trackpad. Instead it jumps around the screen on its own, opening windoes and app at random.
At wits end. Any advice?

Try a PRAM reset, http://support.apple.com/kb/HT1379?viewlocale=en_US and if that does not help take the MBP to an Apple store genius bar and have the techs run their diagnostics.

Required Info About End Point URL and WSDL generated in SOA

Hi All
Consider the follow example WSDL
http://localhost:8001/soa-infra/services/default/DehydrationDetails/dehydrationstorebpelprocess_client_ep?WSDL
The above is the END POINT URL generated in my SOA.
Can i have a control over it ? I mean whenever i deploy the total url is something like this : http://host:port//soa-infra/services/default/CompositeName/BPELName?WSDL
Can i customize to have it deployed into another location of my SOA and have WSDL URL like this ? : http://host:port//BPELNAme?WSDL

I guess not easily: the part /soa-infra is the URL for the SOA Suite webapplication, / is the URL for FMW Welcome Page Application.
Try to change these around, good luck :-)
You can look this up in your weblogic console application.
Groeten,
HJH

Motor direction controlled by Dial control

how to control the direction of motor by using Dial control,for example, if the pointer locates the negative area, the motor would reverse. Generally the direction of motor is determined by the values of AIN2 and AIN1 in micro chip, if the value of AIN1 is bigger than that of AIN2, the motor would turn in certain direction, if not, the motor would reverse. However, I want to use only Dial control to control the direction. What should I do?
Solved!
Go to Solution.

Use the comparison function >0.

Trading partner - End Point URI

Hi,
I have trying to creat a B2B application based on similar lines as the Buyer Supplier
workflow provided as the part of the samples.
Now, when I am defining the trading partner, I need to define the end point URI.
I believe this is some entity (probably) a servlet, that listens to requests fro
other trading partners. Now the enity that I entered here, should I create it or
doe the integration platform create it for me.
I feel that its not getting created, because when defining the CPA, and when trying
to enable it, the B2B server front end hangs. There is a log though in the log file.
INFO: Collaboration Agreement test/163.122.33.185:5a6c6b:edfce8a856:-8000 is successfully
enabled in Collaborate Server.>
INFO: Collaboration Agreement test/163.122.33.185:5a6c6b:edfce8a856:-8000 is registered
successfully
Now, are these two problems related.
Thanks and regards
RAD

Again after this I was getting Document Protocol Error, and PROTOCOL_ENDPOINT = null
I came to know from dheeraj's reply that these errors are only due to me bad payload.
In document Editor if we say generate the data, actually the data is not valid data, I opened the .dat file in Document Editor analyser and it showed me the errors.
I corrected teh errors, and now I am still getting error "5016: A mandatory data element is missing"
Segment ISA(Interchange Control Header) at guideline position (N/A) is missing.
I am still checking with the payload for the validation against the ecs file.
Thanks Dheeraj for your answer, I got some confidence.

Problem getting parameter values at the service end point

I am having problem getting parameter values at the service end point. I created service end point and this method is having 35 parameters and then i created test client file using Sun One Studio 5. but when i run this test client and make a call to service it sends wrong value to first three parameters to the service end point. I tried all the way round but it gave me same sort of problem. I change the order of parameters change the names of parameters but it didn�t work. And then i started chopping of parameter from the left side. And my problem is solved when my parameter list reached to 12 from 35. So is it a bug or some problem with my configuration or some thing else.
I am using sun one studio 5 with sun one app 7. My service end point does very simple thing. It only takes out put of the parameter to the server log file. And my wsdl file seems all right. There is no conflict with the count and data type of the parameter information it contains.
�     Service End Point Definition (in EJB)
public java.lang.String setNewAddress(java.lang.String propertyName, java.lang.String status, java.lang.String PMSCode, java.lang.String streetNumPrefix, int streetStartNum, java.lang.String streetStartNumSuffix, int streetEndNum, java.lang.String streetEndNumSuffix, java.lang.String streetName, java.lang.String streetType, java.lang.String streetSuffix, java.lang.String localityPrefix,java.lang.String localityName, java.lang.String postcode, java.lang.String stateCode, java.lang.String countryCode, java.lang.String description, java.lang.String coordinateAccuracy, int longitude, int latitude, java.lang.String planNumber, java.lang.String lotPrefix, int lotNumber, int siteID, java.lang.String countryName, java.lang.String parishName, java.lang.String section, int portionNum, int crownAllotNum, int titleVol, java.lang.String folio, java.lang.String esa, int aliasID, int aliasTagID,String ID) {
System.out.println(propertyName);
System.out.println(PMSCode);
System.out.println(streetNumPrefix);
........ taking printout of all the paramters
�     This is my WSDL file
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="NMService" targetNamespace="urn:NMService/wsdl" xmlns:tns="urn:NMService/wsdl" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<types/>
<message name="NMServiceServantInterface_setNewAddress">
<part name="String_1" type="xsd:string"/>
<part name="String_2" type="xsd:string"/>
<part name="String_3" type="xsd:string"/>
<part name="String_4" type="xsd:string"/>
<part name="int_5" type="xsd:int"/>
<part name="String_6" type="xsd:string"/>
<part name="int_7" type="xsd:int"/>
<part name="String_8" type="xsd:string"/>
<part name="String_9" type="xsd:string"/>
<part name="String_10" type="xsd:string"/>
<part name="String_11" type="xsd:string"/>
<part name="String_12" type="xsd:string"/>
<part name="String_13" type="xsd:string"/>
<part name="String_14" type="xsd:string"/>
<part name="String_15" type="xsd:string"/>
<part name="String_16" type="xsd:string"/>
<part name="String_17" type="xsd:string"/>
<part name="String_18" type="xsd:string"/>
<part name="int_19" type="xsd:int"/>
<part name="int_20" type="xsd:int"/>
<part name="String_21" type="xsd:string"/>
<part name="String_22" type="xsd:string"/>
<part name="int_23" type="xsd:int"/>
<part name="int_24" type="xsd:int"/>
<part name="String_25" type="xsd:string"/>
<part name="String_26" type="xsd:string"/>
<part name="String_27" type="xsd:string"/>
<part name="int_28" type="xsd:int"/>
<part name="int_29" type="xsd:int"/>
<part name="int_30" type="xsd:int"/>
<part name="String_31" type="xsd:string"/>
<part name="String_32" type="xsd:string"/>
<part name="int_33" type="xsd:int"/>
<part name="int_34" type="xsd:int"/>
<part name="String_35" type="xsd:string"/></message>
<message name="NMServiceServantInterface_setNewAddressResponse">
<part name="result" type="xsd:string"/></message>
<portType name="NMServiceServantInterface">
<operation name="setNewAddress" parameterOrder="String_1 String_2 String_3 String_4 int_5 String_6 int_7 String_8 String_9 String_10 String_11 String_12 String_13 String_14 String_15 String_16 String_17 String_18 int_19 int_20 String_21 String_22 int_23 int_24 String_25 String_26 String_27 int_28 int_29 int_30 String_31 String_32 int_33 int_34 String_35">
<input message="tns:NMServiceServantInterface_setNewAddress"/>
<output message="tns:NMServiceServantInterface_setNewAddressResponse"/></operation></portType>
<binding name="NMServiceServantInterfaceBinding" type="tns:NMServiceServantInterface">
<operation name="setNewAddress">
<input>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="encoded" namespace="urn:NMService/wsdl"/></input>
<output>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="encoded" namespace="urn:NMService/wsdl"/></output>
<soap:operation soapAction=""/></operation>
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="rpc"/></binding>
<service name="NMService">
<port name="NMServiceServantInterfacePort" binding="tns:NMServiceServantInterfaceBinding">
<soap:address location="http://localhost:80/NMService/NMService"/></port></service></definitions>
�     I followed steps given this example. http://developers.sun.com/prodtech/javatools/jsstandard/reference/docs/s1s5/stockapp.html.
If some one know what is wrong. Is it me or some thing wrong with the method I followed. But I am sure that I followed exactly the same method as it given in examples. So if some one can guide me
Thanks

I just found that there is a bug with Sun One Studio 5. It creates faulty JSP file to test the client for the web services. With above problem I tested my web services using different developing environment such as Jdeveloper 10g. I created client stub using wsdl file generated by sun one studio. And made call to my web service and all the parameter reached perfectly at service end point. And then I used stub class created by sun one studio for the client and made the same call. And it also went well. So the problem is with the test application (JSP File) sun one creates for my web service.
This is the majore problem i faced during the development. But still there is many problem along with this which is not seriouse enough but requires attension. I would like sun developers to make sun one studio IDE simpler and handy .

When using option right/left arrow in clip trimmer end point handle won't stick

From the help menu:
In the Clip Trimmer, do either of the following:
Drag the handles at either end of the yellow clip selection to set a new startpoint and endpoint.
Move the handles one frame at a time by placing the pointer near the handle that you want to adjust, and then holding down the Option key as you press the Left Arrow or Right Arrow key.
Move the entire yellow selection box to the left or right by pressing the Left Arrow or Right Arrow key, or by clicking within the box and dragging. Using this technique, you can change which video frames are selected without changing the duration of the selection
End of help menu clip
The bug I've found is that when I place the pointer near the end handle I can hit option arrow and trim the end one frame forward or backwards but when I then hit option arrow a second time the start handle is trimmed. Thus it is hard to quickly option arrow the end handle trim multiple frames without having to move the pointer each time before hitting option arrow. Trimming the start point handle works like I would like as I can just keep hitting option arrow and the start point handle will trim a frame each time. The end point handle should work the same way but it doesn't. I'm on the latest ver 9.02

Tea,
One thing you can do to help yourself out is to create bookmarks to give you a visual reference for the beats in the music.
You create a bookmark by choosing Bookmarks>Add Bookmarks or by typing command-b.
So you can place your song in the timeline and then play it while tapping out command-b's to the beat of the music. You'll then have little green diamonds in the timeline to use as reference points.
Similarly, you can choose View>Show Audio Waveforms to identify the beats in the music by seeing the peaks in the waveforms.
These techniques should make it a bit easier to make your edits in time with your music.
Keep in mind though, that your movie is built from left to right in the time line. When you edit a clip your clips will always slide in to take up any space to the left of the clip.
When they do that, you can slide them apart again. Doing so will create a clip of black between them that can later be replaced.
One last thing to mention. If you select your music track and then choose Advanced>Lock Audio Clip at Playhead you can then slide a clip around and the locked audio will move with it.
It's a bit quirky I've found, but may also be useful.
Matt

Error while creating the end point ICMON_UI_WS - SP11

Hi All,
We have upgraded the SAP Solution Manager 7.1 SP04 to SP11.
Currently i am working on system preparation.
solman_setup -> System preparation -> 5.3 Enable Web Services getting the below error
CX_URLAPI_URL_EXCEPTION : Error during End Point creation
Long Text(1)
Error during End Point creation.
Text(2)
CX_SRT_WSP_CONFIG : Error when reading variant "ICMON_UI" of service
definition "ICMON_UI": Web service object does not exist
Also checked the note :1900781 - Missing services required by Solman Setup System Preparation Step 4.3 Enable Web Services.
But this note is available for download.
Any idea about this issue.
Rg,
Karthik

Hi
Try out these point
1. Take the backup of the folder .dtc ,.dtr in your home directory.Delete .dtr & .dtc folders in your directoryt,hen try to create it.
2.Check NWDS, WebAS, NWDI, and its compatability ? Which versions are you running now?
3. [Connect to DTR Fails |http://help.sap.com/saphelp_erp2005/helpdata/en/69/21244134a56532e10000000a1550b0/frameset.htm]
4 . See the Note : 939041 & 772755
Best Regards
Satish Kumar

TS1702 Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a

Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a blur.

Do you have a question? This is a user to user help forum. Apple is not here only other users like yourself. You don't report problems to Apple here.
By the way, it might help if you indicated where you are located.
To complain to Apple use http://www.apple.com/feedback/ipad.html

BPEL End Point URL using External Load Balancer URL

Hi All,
We have Oracle SOA Suite installed in a clustered environment as per the Enterprise Deployment Guide 10g Release 310.1.3.3.0 E10294-02.
I have deployed a BPEL process to the clustered environment and the end point refers to the internal url of the load balancer e.g. http://internallink:8001/orabpel/default/testService/1.0
When we just paste this end point in a browser, enter the parameters and click on invoke, the BPEL Process gets invoked.
However, if we try to use the external url(which is on https) of the load balancer as the enpoint url eg https://externallink/orabpel/default/testService/1.0 to invoke the same BPEL process, the page which is used to accept the parameters and the used to invoke the BPEL process is successfully displayed. However, when we try to invoke the service, the connection times out.
Please note that internallink and externallink are the internal and external VIPs, respectively.
Does someone have an idea of what may be wrong or what needs to be corrected to be able to invoke the BPEL process using the external VIP, please?
Thanks in advance.

Check if the port of ESB in your server is open.
I think that the port is: 7777
try from ESB server:
wget WSDLURI
if you got the file then the port is closed.

Is there any way to achieve dynamic end point in SOA 11g (non-AIA process)

Hi,
We are using SOA Suite 11.1.1.5.0 and we are not using AIA product..Is there any mechanism to achieve dynamic end point?If so can you please tell me how we can achieve this.
Thanks in advance.

Hi All,
We can achieve dynamic end point in oracle soa suite 11g
Check the below link
https://blogs.oracle.com/ateamsoab2b/entry/invoking_web_services_dynamically_in
regards
Shankari

End point behavings of Dial controls

Similar Messages

Maybe you are looking for