End point protection

Hi everyone,
we have installed SCCM 2012 and pushed endpoint protection from the SCCM server
and we have XP sp3 machines at the client end.
problem: XP machines are facing following error and user is not able to log in their computer and have to forcefully restart the PC.
and this error is only with the XP machines and all the machines are in domain log in.

Hi,
Anything updates now? Maybe it is due to an update that was shipped on April 15, 2014 and it was corrected via signature update, which automatically resolved the issue, and if you have deployed the most recent signatures do not need to take any action.
In addition, if you have disabled Behavior Monitoring or changed any other features, please revert those changes.
More information:
Antimalware Engine 1.1.10502.0 was released to customers on 17 April 2014
Best regards,
Susie

Similar Messages

Windows 10 Enyerprise Preview - System Center 2012 R2 End Point Protection Cannot be installed

Hi
I tried to install the System Center Config Manager client on Windows 10 Enterprise Preview edition and able to only install the Config mgr client. End point protection error wrong OS version.
Can some one advise me.
Shri

It is known issue and since it is Technical Preview not only SCEP but also you are unable to install other Anti-Malware software. You may use Windows Defender which build into Windows 10 TP and it is full Anti-Malware protection.

Symantec's End Point Protection

I just bought a new IMAC and wanted to install anti-virus software. On my old IMAC, I had downloaded from my company's website, Norton Anti-virus for MAC.
They no longer offer that software but instead offer End Point. I downloaded and installed it. Should that be adequate anti-virus and firewall protection for my computer?
Thanks!

The very best protection for your computer is keeping it up-to-date and allowing it to run it's built in daily maintenance. Antivirus software on Macs tend to create more problems than they solve. While you did have a problem it was because either you or another user on your computer were downloading from unfamiliar sites. Please read Viruses, Trojans, Malware - and other aspects of Internet Security to get more informative information.
At all cost I would recommend avoiding Symantec products on your Mac unless of course you simply want problems.

Reporting for System Center End point Protection -Antivirus Infections,Signature updates,Errors/failures

Hi,
We have SCEP on all servers 2008 R2 and 2012, now basically we are loking for specific information on
infections
Signature Updates
Errors/Failures.
Regards,
gautham.K
MCTS-Microsoft Exchange Adminstrator,2010

The Antimalware activity report cover your 1 request.
The Computer Endpoint Protection status covers the other two request, it is a drill through for the other reports and it is within a hidden folder.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

WAAS out of session - Symantec End Point

Hi,
We have a router 3845 with a WAE-522-K9. Eventually we have received notifications about "session limit" and we got this:
Current Active Optimized Flows: 790
Current Active Optimized TCP Plus Flows: 790
Current Active Optimized TCP Only Flows: 0
Current Active Optimized TCP Preposition Flows: 0
Current Active Auto-Discovery Flows: 0
Current Reserved Flows: 10
Current Active Pass-Through Flows: 155
Historical Flows: 387
D:DRE,L:LZ,T:TCP Optimization RR:Total Reduction Ratio
A:AOIM,C:CIFS,E:EPM,G:GENERIC,H:HTTP,M:MAPI,N:NFS,S:SSL,V:VIDEO
ConnID Source IP:Port Dest IP:Port PeerID Accel RR
I was reading some trouble shooting documents but i cannot get a solution. It could be a "Denial of Service" or a misconfiguration of SEP.
Both Servers are Symantec End Point Servers.
Thanks for your support
131107 12.17.2.5:4423 10.5.19.146:8014 00:21:5e:27:9c:58 TDL 14.1%
131173 12.17.2.5:4465 10.5.19.146:8014 00:21:5e:27:9c:58 TDL 02.4%
131175 12.17.2.5:4489 10.5.19.146:8014 00:21:5e:27:9c:58 TDL 48.6%
131200 12.17.2.5:4514 10.5.19.146:8014 00:21:5e:27:9c:58 TDL 31.9%
131211 12.17.2.5:4515 10.5.19.146:8014 00:21:5e:27:9c:58 TDL 10.1%
131259 12.17.2.5:4561 10.5.19.146:8014 00:21:5e:27:9c:58 TDL 30.1%
131295 12.17.2.5:4591 10.5.19.146:8014 00:21:5e:27:9c:58 TDL 31.3%
131332 12.17.2.5:4619 10.5.19.146:8014 00:21:5e:27:9c:58 TDL 14.1%
131345 12.17.2.5:4629 10.5.19.146:8014 00:21:5e:27:9c:58 TDL 14.1%
131402 12.17.2.5:4665 10.5.19.146:8014 00:21:5e:27:9c:58 TDL 00.0%
131424 12.17.2.5:4706 10.5.19.146:8014 00:21:5e:27:9c:58 TDL 06.4%
131439 12.17.2.5:4725 10.5.19.146:8014 00:21:5e:27:9c:58 TDL 16.2%
131444 12.17.2.5:4744 10.5.19.146:8014 00:21:5e:27:9c:58 TDL 23.3%
131473 12.17.2.5:4796 10.5.19.146:8014 00:21:5e:27:9c:58 TDL 31.9%
131482 12.17.2.5:4813 10.5.19.146:8014 00:21:5e:27:9c:58 TDL 21.9%
131498 12.17.2.5:4824 10.5.19.146:8014 00:21:5e:27:9c:58 TDL 31.8%
131500 12.17.2.5:4839 10.5.19.146:8014 00:21:5e:27:9c:58 TDL 07.4%

What version of WAAS OS are you on and how long has it been since you reset your Policy Rules to the default? Also, from enable, do a "clear connection" to purge all those out of there and get things accelerating again. The WAAS policy rules stay the same through each upgrade, so if your original policy rules date back to version 4.1.1, there have been a lot of enhancements since then.
I had a similar problem with Sophos corporate virus protection. Each of my clients would open 20+ sessions to the Sophos update server and max out my connections.
I was on WAAS OS Version 4.4.3c when it was happening. My first solution, was to create a Policy for Pass through only on the Sophos TCP port destination. I kept this policy in place until I upgraded to WAAS OS verion 5.0.1 about a month ago. After the update, I removed the rule and reset all rules to the default, which the default rule set from 5.0 is different than the default ruleset on 4.3.x which I had kept through every upgrade. I reset the ruleset for a different issue, but after I did the reset, the Sophos Clients only took 2 TCP sessions each. One from Client to Server, one from Server to Client.

Enabling End Point Security

I just want to throw this out here for comments.
We have been running ZCM for about a year now with all other modules disabled. I'm about to enable End Point Security and wonder what and if there would be anything that will change on the client sides?
I don't want to enable it and something unexpected happens?
Any comments would be great.
Thank you.

My advice, use a phased approach.
Enabling ZESM introduces some new features at the agent side. You need to be familiar with those before your users call you.
Take a couple of machines, and enable the Endoint Security modules at the device level (Override settings inhereted from the Zone). This way, you can test on some machines first. You can also do this at folder level, if you have your devices organized hierarchically.
Cheers,
Daniel
>>>
From: odegos<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 10/12/2011 11:06 am
Subject: Enabling End Point Security
I just want to throw this out here for comments.
We have been running ZCM for about a year now with all other modules
disabled. I'm about to enable End Point Security and wonder what and if
there would be anything that will change on the client sides?
I don't want to enable it and something unexpected happens?
Any comments would be great.
Thank you.
odegos
odegos's Profile: http://forums.novell.com/member.php?userid=9850
View this thread: http://forums.novell.com/showthread.php?t=446512

End point configuration

Hi Experts,
I am facing a situation in which i have a WSDL from a non sap system with server(from which this wsdl is coming) host name say "xyz". I am trying to consume this service in WD JAVA.
Now this server host name("xyz") is a part of URL of the WSDL. Is there any way i can configure the end points for this service so that in case if we change the server name or server ip, say from "xyz" to "abc", we dont have to made any changes in our coding. May be some configuration some where.
It will be really helpful if anyone can provide me with a optimum solution.
Regards
Pranav

Hi Pranav,
I see. OK, then here it is in short how it would work with Service Groups.
At design-time:
1. When you import the service in order to create the Adaptive WD Web Service Model (doesn't matter from where, e.g. you can also use WSDL URL), on one of the steps of the wizard, you have to choose a service group - let's say you create a new service group "NonSAPServices"
2. You develop your application, build and deploy it
At configuration-time in NWA:
1. First you have to create a provider system connection - here you specify the concrete WSDL URL that is to be used at runtime. If your host changes, the only thing you have to do is to change the URL here. You might also need to specify here a user/pass for the WSDL if it is protected.
2. In case you want to authenticate to the non-SAP service with a technical service user, i.e. all calls will be made on behalf of that user, you have to create a User Account and assign it to the provider you have created in step1
3. Assign the provider system to the service group in Application Communication.
More information you can find here: [The New SOA Configuration Approach|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/40dabb46-dd66-2b10-1a9a-81aa620098b3]
Ciao, Alexander

Problem getting parameter values at the service end point

I am having problem getting parameter values at the service end point. I created service end point and this method is having 35 parameters and then i created test client file using Sun One Studio 5. but when i run this test client and make a call to service it sends wrong value to first three parameters to the service end point. I tried all the way round but it gave me same sort of problem. I change the order of parameters change the names of parameters but it didn�t work. And then i started chopping of parameter from the left side. And my problem is solved when my parameter list reached to 12 from 35. So is it a bug or some problem with my configuration or some thing else.
I am using sun one studio 5 with sun one app 7. My service end point does very simple thing. It only takes out put of the parameter to the server log file. And my wsdl file seems all right. There is no conflict with the count and data type of the parameter information it contains.
�     Service End Point Definition (in EJB)
public java.lang.String setNewAddress(java.lang.String propertyName, java.lang.String status, java.lang.String PMSCode, java.lang.String streetNumPrefix, int streetStartNum, java.lang.String streetStartNumSuffix, int streetEndNum, java.lang.String streetEndNumSuffix, java.lang.String streetName, java.lang.String streetType, java.lang.String streetSuffix, java.lang.String localityPrefix,java.lang.String localityName, java.lang.String postcode, java.lang.String stateCode, java.lang.String countryCode, java.lang.String description, java.lang.String coordinateAccuracy, int longitude, int latitude, java.lang.String planNumber, java.lang.String lotPrefix, int lotNumber, int siteID, java.lang.String countryName, java.lang.String parishName, java.lang.String section, int portionNum, int crownAllotNum, int titleVol, java.lang.String folio, java.lang.String esa, int aliasID, int aliasTagID,String ID) {
System.out.println(propertyName);
System.out.println(PMSCode);
System.out.println(streetNumPrefix);
........ taking printout of all the paramters
�     This is my WSDL file
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="NMService" targetNamespace="urn:NMService/wsdl" xmlns:tns="urn:NMService/wsdl" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<types/>
<message name="NMServiceServantInterface_setNewAddress">
<part name="String_1" type="xsd:string"/>
<part name="String_2" type="xsd:string"/>
<part name="String_3" type="xsd:string"/>
<part name="String_4" type="xsd:string"/>
<part name="int_5" type="xsd:int"/>
<part name="String_6" type="xsd:string"/>
<part name="int_7" type="xsd:int"/>
<part name="String_8" type="xsd:string"/>
<part name="String_9" type="xsd:string"/>
<part name="String_10" type="xsd:string"/>
<part name="String_11" type="xsd:string"/>
<part name="String_12" type="xsd:string"/>
<part name="String_13" type="xsd:string"/>
<part name="String_14" type="xsd:string"/>
<part name="String_15" type="xsd:string"/>
<part name="String_16" type="xsd:string"/>
<part name="String_17" type="xsd:string"/>
<part name="String_18" type="xsd:string"/>
<part name="int_19" type="xsd:int"/>
<part name="int_20" type="xsd:int"/>
<part name="String_21" type="xsd:string"/>
<part name="String_22" type="xsd:string"/>
<part name="int_23" type="xsd:int"/>
<part name="int_24" type="xsd:int"/>
<part name="String_25" type="xsd:string"/>
<part name="String_26" type="xsd:string"/>
<part name="String_27" type="xsd:string"/>
<part name="int_28" type="xsd:int"/>
<part name="int_29" type="xsd:int"/>
<part name="int_30" type="xsd:int"/>
<part name="String_31" type="xsd:string"/>
<part name="String_32" type="xsd:string"/>
<part name="int_33" type="xsd:int"/>
<part name="int_34" type="xsd:int"/>
<part name="String_35" type="xsd:string"/></message>
<message name="NMServiceServantInterface_setNewAddressResponse">
<part name="result" type="xsd:string"/></message>
<portType name="NMServiceServantInterface">
<operation name="setNewAddress" parameterOrder="String_1 String_2 String_3 String_4 int_5 String_6 int_7 String_8 String_9 String_10 String_11 String_12 String_13 String_14 String_15 String_16 String_17 String_18 int_19 int_20 String_21 String_22 int_23 int_24 String_25 String_26 String_27 int_28 int_29 int_30 String_31 String_32 int_33 int_34 String_35">
<input message="tns:NMServiceServantInterface_setNewAddress"/>
<output message="tns:NMServiceServantInterface_setNewAddressResponse"/></operation></portType>
<binding name="NMServiceServantInterfaceBinding" type="tns:NMServiceServantInterface">
<operation name="setNewAddress">
<input>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="encoded" namespace="urn:NMService/wsdl"/></input>
<output>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="encoded" namespace="urn:NMService/wsdl"/></output>
<soap:operation soapAction=""/></operation>
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="rpc"/></binding>
<service name="NMService">
<port name="NMServiceServantInterfacePort" binding="tns:NMServiceServantInterfaceBinding">
<soap:address location="http://localhost:80/NMService/NMService"/></port></service></definitions>
�     I followed steps given this example. http://developers.sun.com/prodtech/javatools/jsstandard/reference/docs/s1s5/stockapp.html.
If some one know what is wrong. Is it me or some thing wrong with the method I followed. But I am sure that I followed exactly the same method as it given in examples. So if some one can guide me
Thanks

I just found that there is a bug with Sun One Studio 5. It creates faulty JSP file to test the client for the web services. With above problem I tested my web services using different developing environment such as Jdeveloper 10g. I created client stub using wsdl file generated by sun one studio. And made call to my web service and all the parameter reached perfectly at service end point. And then I used stub class created by sun one studio for the client and made the same call. And it also went well. So the problem is with the test application (JSP File) sun one creates for my web service.
This is the majore problem i faced during the development. But still there is many problem along with this which is not seriouse enough but requires attension. I would like sun developers to make sun one studio IDE simpler and handy .

When using option right/left arrow in clip trimmer end point handle won't stick

From the help menu:
In the Clip Trimmer, do either of the following:
Drag the handles at either end of the yellow clip selection to set a new startpoint and endpoint.
Move the handles one frame at a time by placing the pointer near the handle that you want to adjust, and then holding down the Option key as you press the Left Arrow or Right Arrow key.
Move the entire yellow selection box to the left or right by pressing the Left Arrow or Right Arrow key, or by clicking within the box and dragging. Using this technique, you can change which video frames are selected without changing the duration of the selection
End of help menu clip
The bug I've found is that when I place the pointer near the end handle I can hit option arrow and trim the end one frame forward or backwards but when I then hit option arrow a second time the start handle is trimmed. Thus it is hard to quickly option arrow the end handle trim multiple frames without having to move the pointer each time before hitting option arrow. Trimming the start point handle works like I would like as I can just keep hitting option arrow and the start point handle will trim a frame each time. The end point handle should work the same way but it doesn't. I'm on the latest ver 9.02

Tea,
One thing you can do to help yourself out is to create bookmarks to give you a visual reference for the beats in the music.
You create a bookmark by choosing Bookmarks>Add Bookmarks or by typing command-b.
So you can place your song in the timeline and then play it while tapping out command-b's to the beat of the music. You'll then have little green diamonds in the timeline to use as reference points.
Similarly, you can choose View>Show Audio Waveforms to identify the beats in the music by seeing the peaks in the waveforms.
These techniques should make it a bit easier to make your edits in time with your music.
Keep in mind though, that your movie is built from left to right in the time line. When you edit a clip your clips will always slide in to take up any space to the left of the clip.
When they do that, you can slide them apart again. Doing so will create a clip of black between them that can later be replaced.
One last thing to mention. If you select your music track and then choose Advanced>Lock Audio Clip at Playhead you can then slide a clip around and the locked audio will move with it.
It's a bit quirky I've found, but may also be useful.
Matt

Error while creating the end point ICMON_UI_WS - SP11

Hi All,
We have upgraded the SAP Solution Manager 7.1 SP04 to SP11.
Currently i am working on system preparation.
solman_setup -> System preparation -> 5.3 Enable Web Services getting the below error
CX_URLAPI_URL_EXCEPTION : Error during End Point creation
Long Text(1)
Error during End Point creation.
Text(2)
CX_SRT_WSP_CONFIG : Error when reading variant "ICMON_UI" of service
definition "ICMON_UI": Web service object does not exist
Also checked the note :1900781 - Missing services required by Solman Setup System Preparation Step 4.3 Enable Web Services.
But this note is available for download.
Any idea about this issue.
Rg,
Karthik

Hi
Try out these point
1. Take the backup of the folder .dtc ,.dtr in your home directory.Delete .dtr & .dtc folders in your directoryt,hen try to create it.
2.Check NWDS, WebAS, NWDI, and its compatability ? Which versions are you running now?
3. [Connect to DTR Fails |http://help.sap.com/saphelp_erp2005/helpdata/en/69/21244134a56532e10000000a1550b0/frameset.htm]
4 . See the Note : 939041 & 772755
Best Regards
Satish Kumar

TS1702 Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a

Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a blur.

Do you have a question? This is a user to user help forum. Apple is not here only other users like yourself. You don't report problems to Apple here.
By the way, it might help if you indicated where you are located.
To complain to Apple use http://www.apple.com/feedback/ipad.html

BPEL End Point URL using External Load Balancer URL

Hi All,
We have Oracle SOA Suite installed in a clustered environment as per the Enterprise Deployment Guide 10g Release 310.1.3.3.0 E10294-02.
I have deployed a BPEL process to the clustered environment and the end point refers to the internal url of the load balancer e.g. http://internallink:8001/orabpel/default/testService/1.0
When we just paste this end point in a browser, enter the parameters and click on invoke, the BPEL Process gets invoked.
However, if we try to use the external url(which is on https) of the load balancer as the enpoint url eg https://externallink/orabpel/default/testService/1.0 to invoke the same BPEL process, the page which is used to accept the parameters and the used to invoke the BPEL process is successfully displayed. However, when we try to invoke the service, the connection times out.
Please note that internallink and externallink are the internal and external VIPs, respectively.
Does someone have an idea of what may be wrong or what needs to be corrected to be able to invoke the BPEL process using the external VIP, please?
Thanks in advance.

Check if the port of ESB in your server is open.
I think that the port is: 7777
try from ESB server:
wget WSDLURI
if you got the file then the port is closed.

Is there any way to achieve dynamic end point in SOA 11g (non-AIA process)

Hi,
We are using SOA Suite 11.1.1.5.0 and we are not using AIA product..Is there any mechanism to achieve dynamic end point?If so can you please tell me how we can achieve this.
Thanks in advance.

Hi All,
We can achieve dynamic end point in oracle soa suite 11g
Check the below link
https://blogs.oracle.com/ateamsoab2b/entry/invoking_web_services_dynamically_in
regards
Shankari

End Point URI change in Business service?

Hi all,
We had done all our osb code development and moving from one environment to other(Eg. E2E testing to UAT, Then UAT to Production). When we move the codes from one server to the other we need to change the End Point URI in the business service for almost all the OSB services which calls external systems else Calling BPEL services. SO is there any other way to make the end point URI's in some other file and read that file to get the end point URI and set in BS. Or did any one have any other suggestions?? Because each and every time we need to make the code change when we move on from one server to other.
Regards,
Prabhu

Why don't you use customization file -
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15867/customization.htm#CACJCAGD
Regards,
Anuj

Issue with variable while in a PSSession connected to an end point

Ok so Ive put together a simple script that will allow our helpdesk to look at permissions on a specified folder or share adn display in a nice html page. I need it to run under different credentials so I set up an endpoint which I can connect to remotely
and run the script. The issue is in the variable that needs to get set. It prompts for the folder location and once you put it in, it just freezes up. If I run the script locally its fine and works perfectly. but running it in the remote
session connected to an end point, it just doesnt do anything once you put in the information after it prompts you. For testing also I set the $folderpath to a specific path and it does run fine through a remote session so its just an issue passing
that input back to the variable while in the remote session. Any idea?
$a = "<style>"
$a = $a + "BODY{background-color:peachpuff;}"
$a = $a + "TABLE{border-width: 0px;border-style: solid;border-color: black;border-collapse: collapse;}"
$a = $a + "TD{border-width: 3px;padding: 5px;border-style: solid;border-color: black;background-color:PaleGoldenrod}"
$a = $a + "</style>"
$folderpath = Read-Host -Prompt "Enter full folder path here"
$cname ="Permissions for $folderpath : "
Get-Acl $folderpath | select access -ExpandProperty access| select identityReference | ConvertTo-HTML -head $a -body "<H2>$CNAME</H2>" | Out-File \\server\PermReports\perms.html

Here's some napkin code, FWIW
On the user side:
$Session = New-PSSession -ComputerName remoteservername -ConfigurationName checkperms
$ADIdentityReference =
#Coax an AD identity reference out of the button monkey
Invoke-Command -ScriptBlock { .\PermissionsScript.ps1 } -Session $session -Argumentlist $ADIdentityReference |
ForEach-Object {
#Ask for more input, or quit
Remove-PSSession $Session
and on the remote end:
Param ($IdentityReference)
Try {
Get-ADSomething -Identity $IdentityReference -EA Stop |
foreach-object {
Do-SomeStuff
Catch {
#Return validation fail message
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

End point protection

Similar Messages

Maybe you are looking for