End/Power button shortcut goes to call logs

Hi,
The End/Power button shortcut goes to call logs, I've tried looking around to find a shortcut or button combination to get it back to working normally.
Any thoughts?
Thanks

Have you tried to backup all the data on the device using the Desktop Manager software, then wipe the device?
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Similar Messages

  • How do I enable the power button to hang up calls?

    i don't know how to enable the power button to hang up phone calls. I would really appreciate the help.

    You can't. Too many people would accidentally hang up on people, then they'd come here to complain about it.

  • G4 MDD power button going bad?

    Hi all -
    I'm using a g4 MDD dual 1gig machine. Has been working great for the past few months, till just now. When I power down, the computer won't restart, unless I unplug it. (what?) That's right, the computer works fine, I turn it off and the power button will not turn the computer on unless I physically unplug the machine for a split second. After that it powers right up (at least for now). Prior to unplugging, the power switch does nothing, no lights, no chimes, nothing. It's like there is no power going to the compuer at all.
    Does this sound like the power button is going bad or maybe something else? A few months ago I had PRAM/ PMU issues - could they be coming back?
    Any advice is much appreciated. Thanks in advance!

    I took care of my power-up issue tonight by working on my power supply. Here is the posting I made in another thread:
    Here is what I did to troubleshoot my power issue. Your power supply can be serviced and this post offers a couple thoughts and some troubleshooting suggestions. Please read it through to the end. This isn't a cure-all for all G4 Macs, but the steps I followed seem to cover a number of bases and might prove helpful to those who are really frustrated.
    I've owned a Mac every year all the way back to 1987 and have never had an issue until now and I am convinced my problem may have been triggered by a power surge or brown-out, which we seem to have experienced a lot of around here lately. This post refers to the Samsung power supply with Apple Part Number 614-0224.
    I have a G4 Dual 1.25 MDD I purchased in 2003. I have had a brief issue with powering up my CPU. It wouldn't power up last weekend. I unplugged the power cord, then reconnected it to the machine and it powered up. I reasoned the power cord had become loose, but then last night I couldn't get it to come up at all. Not even a click. No lights.
    So I tried all the easiest possible solutions: resetting the PRAM (pulling the battery from the logic board) and resetting the PMU (Power Management Unit). The switch, by the way, is located near where the ATA drives plug in to the logic board. Neither of those two things solved my problem. The CPU would still not power up.
    I checked the lithium battery voltage with a voltmeter. It was at 3.6v, so it was still good.
    I then decided my issue was probably with the power supply. With the power cord disconnected from the back of the CPU, I pulled the black power connection from the logic board and performed a power supply voltage test following the pin schematic found in this thread:
    http://docs.info.apple.com/article.html?artnum=58561
    The +5v trickle voltage found at Pin 9 was not present. I had no other voltage readings on any of the other pins. My issue HAD to be with the power supply.
    Tonight I removed the power supply by disconnecting all of the optical drives (I have two DVD burners in this unit), all of the hard drives (three) and all of the logic board connections.
    I removed all of the screws from the outer casing of the power supply, including the fat screws attaching the two black fans to the unit and the one long screw in the middle and near the edge of where the two fans are. The casing came right off.
    There have been a lot of questions as to whether there are fuses in these power supplies. There has to be some protection for them and I have yet to see any power supply that did not have a fuse or resettable circuit breaker. This power supply was no different...it has a 250W, 8A fuse that is easily accessible and is located on the same side as the male power socket, near the edge of the circuit board. It is hiding under a yellow shield and is right next to a plastic connector.
    Bingo! My fuse was blown. Many glass fuses will show some sort of blackness and mine did, as well as being able to see the actual glob of metal where the fuse burst.
    What caused a fuse to blow will be different for each machine. I believe in my case it suffered from a power surge. There were no visible signs of burns from arcing, popped capacitors, shorts or bad chips. The board was completely clean, which tells me the issue was near the power source. The fuse may also have been on the verge of popping when I unplugged and reconnected the power cord.
    Everything's speculation, but replacing the fuse did the trick in my case and I saved myself time and about $150 (on average for a used PS on eBay). I picked up a second fuse to tape to the inside of the CPU, near the power supply, so I will have a backup fuse if I need it in the future. I may also have a drive that is going bad, or I may have too many drives operating off one supply. My Mac's been configured like this for about five years now. I will replace at least two drives with new, larger capacity drives. I keep my video and digital image files on separate drives, but have a third drive I can blow out. That surely will help prolong the life of my power supply.
    While I had the computer apart I gave it a good vacuum and a little air can action. Dust can aid overheating and defeat the purpose of good airflow from fans.
    Hope this helps.

  • Phone/send button no longer brings up call log

    phone/send button no longer brings up call log. I press the phone button to get to the phone, then hit button again to view call log and screen merely blinks...repeatedly.
    Post relates to: Treo 650 (Cingular)

    We have two Treo 650's in the family.
    Spouse's Treo is having the same problem, button works OK to get into Phone app but second press does not bring up the Recent Calls list.
    Spouse has never installed Datebk5 although I have it. He has problem, I do not. Still I decided to try this fix and similar fix by TakePhone developers...problem NOT resolved.
    I did try a SYSTEM RESET (not a hard or soft reset) and that worked...but in order to get wireless working again a soft reset is required. After doing the required soft reset the problem returned.
    I am not the only one in this boat:
    http://discussion.treocentral.com/showthread.php?t=69082
    Any ideas?

  • Repair/replace iPhone power button by mail

    Hi
    I have an AT&T iphone 3g with a non working power button. Can I call apple and have them send me a box to send it in, or do I have to take it to an apple store? It would be easier to have it replaced by mail, like apple does with ipods.
    Thanks!

    You're welcome.
    Yes - copied from my first post in this thread.
    You can call AppleCare at (800) 694-7466 to handle everything over the phone,

  • My Lumia Icon goes dark during calls and I cannot access the phone pad to unless I hit the power button.

    My Lumia Icon goes dark during calls and I cannot access the phone pad to unless I hit the power button.  Because of this it makes it tough to put my phone on speaker or type in my v-mail password.

    I've been trying to find a common denominator. It happens inconsistently. It never happened before the Denim update. When it does occur, the screen goes black immediately upon answering the call and doesn't come back until the call is ended by the calling party.
    I thought it might be the proximity sensor, but when it's working normally I can see the screen go dark when it's at my ear and comes back when I take it away (tried it multiple times). I had Gestures Beta installed. I wondered if that could have an affect so I uninstalled it, but that didn't make any difference. I'm still stumped by the inconsistency. I haven't reset my phone as I didn't really want to go through that...

  • HT4528 My iPhone 4S won't let me end calls. I have read to restart your phone, but my power button doesn't work so I can't do that. Does anyone have any suggestions.

    My Iphone 4s wont let me end calls. It freezes on the call screen. I can press END CALL many times and try to end it, but it wont end. I have read that I need to restart my phone or turn it off then turn it back on, but my power button doesnt work.  Can anyone help me or give me suggestions. Thank you!

    i think its the assistive touch bc i got that when my home button broke and my lock button is also broken and now it wont let me slid the unlock button, and i shut it down then turned it back on so it automatically showed the keypad and it would only let me press 3 and thats it. i also read a few other topics about it not unlocking and they all used the assistive touch.

  • Mid-2010 15in. MacBook Pro going to black screen requiring reset by holding power button

    Hello all,
         I have been searching for a problem solution for quite some time now. I have a mid-2010 15" Macbook Pro (2.4GHz Intel I5; 4 GB mem) updated to version 10.7.5. The computer randomly goes to a black screen, while the program / movie / whatever is still running (I can hear the sound) and then stalls. I then have to hold the power button down until it will reset. I will post the error message at the end of this.
         I have wiped the computer clean and reinstalled everything and that did not help. I am no longer under Apple warrenty and hoping that someone has experienced. Short of me finding an answer I will take it in to Apple. Thanks in advance for any help!
    Error report:
    Interval Since Last Panic Report:  9808 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    716F24AA-2763-4A12-A3CA-877FE127FD02
    Sat Sep 28 14:06:10 2013
    panic(cpu 2 caller 0xffffff7f81425007): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xffffff809e52e000 0x0a5480a2, D0, P2/4
    Backtrace (CPU 2), Frame : Return Address
    0xffffff807b1d37e0 : 0xffffff8000220792
    0xffffff807b1d3860 : 0xffffff7f81425007
    0xffffff807b1d38f0 : 0xffffff7f8151db83
    0xffffff807b1d3950 : 0xffffff7f8151dbf7
    0xffffff807b1d39c0 : 0xffffff7f823ad855
    0xffffff807b1d3b00 : 0xffffff7f81541ddd
    0xffffff807b1d3b30 : 0xffffff7f8142ed6a
    0xffffff807b1d3be0 : 0xffffff7f8142a43c
    0xffffff807b1d3dd0 : 0xffffff7f8142be4a
    0xffffff807b1d3eb0 : 0xffffff7f813c032c
    0xffffff807b1d3f00 : 0xffffff7f82570c0b
    0xffffff807b1d3f50 : 0xffffff7f825714b2
    0xffffff807b1d3f70 : 0xffffff800023dbbc
    0xffffff807b1d3fb0 : 0xffffff8000820057
          Kernel Extensions in backtrace:
             com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f813 be000->0xffffff7f816b9fff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8082b000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f813ac000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f81373000
             com.apple.nvidia.nv50hal(7.3.2)[38ACBB3D-4E3C-3883-9A4B-67F15592905F]@0xffffff7 f82248000->0xffffff7f8256afff
                dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f813 be000
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8082b000
             com.apple.driver.AGPM(100.12.75)[4EBF3D1C-F65A-32E5-8C97-B8AA89FD05FC]@0xffffff 7f8256e000->0xffffff7f8257efff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8082b000
                dependency: com.apple.driver.IOPlatformPluginFamily(5.1.1d6)[57AAAA9E-4530-35EE-ACB1-A4E893 53D507]@0xffffff7f80a89000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f813ac000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f81373000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    11G63
    Kernel version:
    Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
    Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
    System model name: MacBookPro6,2 (Mac-F22586C8)
    System uptime in nanoseconds: 12779383361706
    last loaded kext at 302561508520: com.apple.filesystems.msdosfs
    Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i5, 2.4 GHz, 4 GB, SMC 1.58f17
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.198.19.22)
    Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST9320325ASG, 320.07 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 5
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 8
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 4
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 4
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3

    You have the MacBookPro6,2, the Edsel of Macs. It may be covered by this program:
    MacBook Pro (15-inch, Mid 2010): Intermittent black screen or loss of video
    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider, to have the machine tested. The routine hardware diagnostics used by service providers may not detect the fault. There is a specific test for this issue.
    Print the first page of the panic report, and the support page linked above, and bring them with you.
    Note that the replacement program only applies within three years of purchase. If you wait beyond that date, Apple may refuse the service. In that case, you'll be quoted a price of about $300 (in the U.S.) for a depot repair. The model was discontinued in February 2011, so the replacement program will be ending quite soon.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Sometimes the replacement part is also defective, so be prepared for that possibility.
    If it's too late for your unit to be repaired under the program, and you don't want to pay for a new logic board, you may be able to stop the panics by disabling automatic graphics switching.
    *An SSD doesn't need to be zeroed.

  • When i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..

    when i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Ifou don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.

  • Power Button doesn't work and cannot Log Out.

    Hi,
    Strange thing: my power button does not work and I cannot even log out or restart or shut it down from the menu! Everytime I need to restart, I have to either force it or hold the button for five minutes, but nothing else works!
    Your help is much appreciated.
    Have a great time!
    Best regards,
    David
    Powerbook G4   Mac OS X (10.4.6)  

    Hi, bruno7.
    1. Have you tried "Mac OS: Apple Pro Keyboard Shortcuts for Shut Down and Restart"?
    2. What changes did you make to your Mac before this problem arose?
    3. Are you using FruitMenu? If so, check for updates, disable it, or uninstall it.
    4. After you next shut down, run the procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified.
    5. An errant Startup or Login Item maybe the cause. My "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is causing the problem.
    6. If none of the above, when you attempt to select Shut Down or Restart from the Apple menu and nothing happens, immediately check the ends of these Console logs for clues.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • TS4080 apple thunderbolt display image on display intermittently goes dark, does not wake from sleep after clicking mouse or keyboard, but there is "bonk" sound after clicking mouse or pressing keys. Rebooting by pressing the power button resolves issue.

    My apple thunderbolt display (which I purchased 1.5 years ago; OS 10.7.5 Mac Mini) intermittently goes dark, does not wake from sleep after clicking mouse or keyboard, but there is "bonk" sound after clicking mouse or pressing keys, so am thinking it is a hardware problem with the display. Rebooting by pressing the power button turns the screen back on, but the same phenomenon has occurred several times. Could this be a software issue, or do I need to have my display repaired? Your feedback would be appreciated.

    Hi ED, tough to tell, but it does sound like it's waking with the bonk, just not displaying.
    Long shot but...
    I wonder if it's a variation of this, of which I've seen many different symptoms...
    Resolution
    Move the mouse or trackpad cursor over the center area of the login window so you can see the user icons. Click on the icon of the user that you would like to login as, type in the user's password, and press Return.
    If the login window is configured to show only the name and password fields, type in the user's name and password into the fields, and press Return (even if you cannot see the rest of the login window).
    Additional Information
    This issue will not occur if the display is not sleeping when the account is logged out. Use the steps below to confirm that the account is not configured to log out automatically while the display is sleeping:
        1.    Open System Preferences > Security & Privacy > General.  Click the padlock to unlock the preference pane and enter your admin password. Click the Advanced button at the bottom, then see if the option "Log out after N minutes of inactivity" (where N is the number of minutes) is enabled.
        2.    Open System Preferences > Energy Saver and configure Display Sleep to occur after the account is logged out, by dragging the slider to a number of minutes that is greater than N was set to in the previous step.
    Important: If automatic log out is not needed, disable "Log out after Nminutes of inactivity" in System Preferences > Security & Privacy > General. This will also prevent the issue.
    http://support.apple.com/kb/TS4135?viewlocale=en_US

  • When I try to do a hard reset it keeps going to voice control my power button not working ant ideas

    Need help to do a hard reset on iphone 4 with broken power button it keeps going to voice control. Any suggestions

    If the power button is physicaly broken, make an appointment at your local genius bar or call AppleCare and get the phone replaced.

  • My iphone's screen goes black and it behaves like that it is switched off.No switches work and the power button also does not respond.The ringtone do not also respond.The only way to switch on the phone is to press  home button and  power button together.

    My iphone's screen goes black and it behaves like that it is switched off.No switches work and the power button also does not respond.The ringtone do not also respond.The only way to switch on the phone is to press  home button and  power button together.

    Pressing the Home button and the sleep/wake or on/off button together until you see the Apple logo and then release is called a reset.
    If no change after a reset, the next step is restoring your iPhone.

  • How do I reject incoming calls on Ios7 when locked? Power button on top right does not work.

    How do I reject incoming calls on Ios7 when locked? Power button on top right does not work.

    I am also facing the same issues. Sometime i get an option to reject call and sometime i won't .
    Tried all the basic troubleshooting i could from my end but nogo. Also tried complete reset by loosing data still the same results. Any suggestions and fix, Apple ???

  • My phone keeps crashing during calls. i reset holding down the refresh and power buttons simultaneously but now even that is not working.

    hello all. i need help and hoping come advice can be offered: this is the second day in a row that my iphone 4 has crashed while i was on a call. without warning the display goes black and neither the refresh button nor the power button will bring it back to life. i held both buttons down simultaneously and that rectified the problem for one day, but now the phone is not responding to any measure. fully charged battery. any advice???

    basics from the manual are restart, reset, restore (first from backup, then as NEW).  Have these been tried?

Maybe you are looking for

  • Arabic text appears in reverse

    Hi, Do you know the answer to this? My Arabic text is appearing correctly However If you copy and paste arabic text from MS Word 2000 into Forms the characters appear reversed. i.e. Arabic example appears as elpmaxe cibarA Any idea what I'm doing wro

  • Help with data table

    I am a new user of LookoutDirect and as luck would have it I need to use a Data Table.  I have spent the better part of a month tying to get it setup.  I found an example on this website which does exactly what I want to do and still can't get it fig

  • Power PC G5 -,"The volume%@needs to be repaired."1)

    Hi folks, turned on our G5 this morning to be met with our usual screen saver, but no Dock, no hard drive on the desktop, no apple logo no finder in the top left corner and everything to the right of that apart from spotlight showing. Restarted the c

  • Is it possible to write a combined add-on for Firefox (desktop) and Firefox (Android and iPhone)?

    Dear Mozilla-Support-Team, I am thinking about a new webservice based on an add-on for Mozilla (and other Internet Browsers). In general, is it possible to write a combined add-on for Firefox (desktop) and Firefox (Android and iPhone)? Or do both Moz

  • Nokia C2-01 - How to Block Number?

    How can I block an unwanted numbers (both calls and texts?) to my phone? There are a couple of people who I don't want to contact me either by ringing or by text! if you have suggestion like 3rd app, please send me a clue like name or what?