End - to - End scenario of IDoC

Hi,
I am going to make a end - to - end scenario of IDoC.
for Purchase Orders(ORDERS).
ECC(RD1) - XI(XD1) - DB.
what are the initial set up required on Sender System ( MY CASE - ECC)
and on Receiver System( XI).
Like I know this , we need to create following things :-
ON ECC SIDE :-
1. RFC Destination to XI(SM59)
2. PORT FOR ABOVE RFC DESTINATION(WE21)
3. LOGICAL SYSTEM(BD54).
NQuestion 1: what all logical systems required on ECC Side.
I mean do i have to maintain logical system for Both sender(RD1) and Receiver(XD1) ?
4. PARTNER PROFILE(WE20).
Question 2: If both logical system is maintained,
then in Partner Profile , where will i add IDOCS - Outbound in SENDER LOGICAL SYSTEM(RD1) or ON RECEIVER LOGICAL SYSTEM(XD1).
ON XI SIDE :-
1. RFC Destination to XI(SM59)
2. PORT FOR ABOVE RFC DESTINATION(IDX1)
3. META DATA IMPORT (IDX5).
Question 3: IS there any logical system required on XI Side also?
is there any thing else left. please specify?
Regards
Dragon.

thank You Srinivas,
That second link( http://www.saptechnical .com/Tutorials/ALE/DataDistributeCustomIDOC/page1.htm ) was very usefull.
regards
Dragon.
Edited by: KOMODO DRAGON on Jun 12, 2010 10:38 AM

Similar Messages

XSLT Mapping :-- End to End Scenario

Can any one provide XSLT Mapping End to End scenario with screen shots?

HI
XSLT Mapping
XSLT stands for EXtensible Stylesheet Language Transformations. It is an XML based language for transforming XML documents into any other formats suitable for browser to display, on the basis of set of well-defined rules.
Using XSLT mapping in a ccBPM scenario
File to Multiple IDocs (XSLT Mapping)
Steps required for developing XSLT Mapping
u2022 Create a source data type and a target data type
u2022 Create Message types for the source and target data types.
u2022 Create Message Interfaces includes Inbound Message interface and Outbound Message interface.
u2022 XSLT Mapping does not require creation of Message mapping, so donu2019t create any Message mapping.
u2022 Create an .XSL file which converts source data type into target data type.
u2022 Zip that .xsl file and import it into Integration Repository under Imported Archives.
u2022 In Interface Mapping choose mapping program as XSL and specify this zip program. (Through search help you will get XSL Mapping programs that you imported under Imported Archives, select your corresponding XSL Program)
u2022 Test this mapping program by navigating to Test tab.
By having look at above steps you can easily find out that this mapping is no where different from other mapping programs, here the challenging lies in creating an XSLT file. If you spend couple of minutes in studying XPATH tutorial you would be in ideal position to create an XSL Transformation (.xsl extension).
If you still find difficulties in generating XSL Transformation, then you can make use of a tool u201CAltova MapForceu201D which will create XSL file for you.
Steps for creating XSL file using this tool:
1. Open the Alto MapForce, import the source .xml and .xsd file in it
2. Similarly import the target .xml and .xsd in MapForce.
3. These two data files should match with source and target data types in Integration Repository.
4. Complete the graphical mapping using extensive list of XSLT functions available there.
5. Save the mapping file.
6. Click the XSLT tab. You will have the entire xslt logic there.
7. Copy that content and save it as .xsl file.
8. Zip above .xsl file and import the same into IR under Imported Archives.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01a57f0b-0501-0010-3ca9-d2ea3bb983c1
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9692eb84-0601-0010-5ca0-923b4fb8674a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/006aa890-0201-0010-1eb1-afc5cbae3f15
xpath functions in xslt mapping
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=xslt+mapping&adv=false&sortby=cm_rnd_rankvalue#
complete mapping guide:
http://help.sap.com/saphelp_nw04/helpdata/en/73/f61eea1741453eb8f794e150067930/content.htm
XSLT MAPPING:
Generic XSLT Mapping for SAP XI,Part I
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/01a57f0b-0501-0010-3ca9-d2ea3bb983c1
Generic XSLT Mapping for SAP XI,Part II
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9692eb84-0601-0010-5ca0-923b4fb8674a
XSLT: Recursive Templates
XSLT: Recursive Templates
Easy RFC lookup from XSLT mappings using a Java helper class
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/05a3d62e-0a01-0010-14bc-adc8efd4ee14
Step u2013 By u2013 Step Simple Approach for XSLT Mapping
Step By Step Simple Approach for XSLT Mapping
http://www.devguru.com/Technologies/xslt/quickref/xslt_element_applytemplates.html
cheers
Edited by: vemuganti naga phalguna on Jul 2, 2008 8:59 AM
Edited by: vemuganti naga phalguna on Jul 2, 2008 9:07 AM

GUID FormatExceptionError in End to End Scenario at runtime, but no error in Message Mapping test

Hi Friends
My scenario is Idoc to RFC and , my mapping is working fine and executing successfully in the message map tab but , it is failing in the End to End case at runtime with GUIDFormatException error, can anyone please help on this , I have searched the forum and no proper or concrete answers are available , creating a separate or new channel is not an option.

Hi,
Check in which step you are receiving this error
1st check in SXMB_MONI/trace
2nd If the above is successful then check in rwb/comm channel monitoring/receiver rfc channel.
Regards
Venkat

Subsciption and notification in segw transaction end to end scenario with example

Subscription and notification scenario using service buider in sap netweaver gateway with end to end scenario with example .

Hi,
Please go through these links
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
Thanks
Vikranth Khimavath

End to end scenario using Webservic and SAP XI

Hi Experts,
I have read many blogs regarding Integrating XI using WebService, SOAP, HTTP for many scenarios but I am still confused and no blogs were clearly saying about the end to end scenario what happens where and how?
My question is could any one please please please explain me why we are using Webservice if you explain me with an CREDIT CHECK scenario using XI and Webservice that would be very fare.
Thanks in advance,
Cheers!!!!

Hi
Did you get to check this article,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9030d1ca-cf07-2b10-8b9c-f027fbc91ffd
regards
Sameer

How to test end to end scenario at RWB??

Hi Experts
is it possible to test end to end scenario at RWB???
My scenario is SOAP to RFC and i should test whether my scenario is working fine or not????
what types of testing has to be done and how???
plz help me out
Thanx in advance for your help

Hello,
In RWB goto Component monitoring -> Adapter Engine on the screen you will be able to see three tabs
Status Setting and Test Message.
Goto test message. Give the details URL and payload for the soap execute.
You can test it from otherway like suggested in above post.
Thanks,
Siddhesh

Certificate question in Web Dispatcher End-To-End SSL scenario

Hy experts,
in end-to-end SSL scenario the web dispatcher (WD) is not used to encrypt/decrypt data, it is only used to forward requests.
So I think we do need a certificate for the portal server, but none for the web dispatcher itself, right?
Another point is which data should be given for CN, DN, OU etc in this scenario (Portal or WD ??)
kind regards
Tom

Tom,
For end to end SSL you do not need a certificate for the Web dispatcher but your J2EE engine should be configured to be accessible over SSL.
If you get the SSL certificate issued for the J2EE based on the name of the J2EE host it will result in a warning message as portal will be accessed using host name of Web dispatcher, so get the certificate issued under the name of the web dispatcher hostname. So, adjust your CN, DN, OU accordingly.
Cheers!!

Simple End to End Web service scenario

Hello All,
Can any one please give me a link or basic documents where I can design end to end scenario using HTTP, SOAP adaptors. How to test these scenarios..... I want to build these scnearios using SAP PI Ehp 1
Thanks
Rajeev

Hi,
please do a search first on your own and come back with more detailed questions
thanks,
Regards,
Michal Krawczyk

MDC_MDH End to end Scenario

Hi ,
I am in need of MDC_H scenario end to end with screen shot from r/3 to MDM and back to R/3. It is very urgent i request you all if any one have the PPT of any item my be material customer or Vendor . Please send to me .
My mail id is [email protected],[email protected]
Much Thanks in advance
Rohit

thank You Srinivas,
That second link( http://www.saptechnical .com/Tutorials/ALE/DataDistributeCustomIDOC/page1.htm ) was very usefull.
regards
Dragon.
Edited by: KOMODO DRAGON on Jun 12, 2010 10:38 AM

End To End Configuration

Hi everybody,
Can any one of you please provide me with some document/ Blog which describes the end to end configuration steps for various scenarios like simple XML to file scenario. I am aware of various teminologies but have never tried hands on a complete configuration.
Thanks and best regards,
Kulwant Singh

Hi,
Please find the links for various scenarios:
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by SAP
Regards,
Nithiyanandam

URGENT: End to End Monitoring

Hy friends,
In message monitoring is not available end to end monitoring for messages.
I have XI running on SP 15.
It is about a scenario IDOC to JDBC ,the monitoring is active , and frequency is set to 5 minute, and also i repeat the scenario more times and nothing !?!?!
Can anyone help me?
Thanks in advance
Bogdan

Hi Bogdan,
It looks like you have two posts with similar question.
Refer to this How-to-Guide on SAP Service Market Place.
http://service.sap.com/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202&_OBJECT=011000358700004422742005E
Rgds,
Sam Raju

Performance end to end testing and comparison between MPLS VPN and VPLS VPN

Hi,
I am student of MSc Network Security and as for my project which is " Comparison between MPLS L3 VPN and VPLS VPN, performance monitoring by end to end testing " I have heard a lot of buzz about VPLS as becoming NGN, I wanted to exppore that and produce a comparison report of which technology is better. To accomplish this I am using GNS3, with respect to the MPLS L3 VPN lab setup that is not a problem but I am stuck at the VPLS part how to setup that ? I have searched but unable to find any cost effective mean, even it is not possible in the university lab as we dont have 7600 series
I would appreciate any support, guidence, advice.
Thanks
Shahbaz

Hi Shahbaz,
I am not completely sure I understand your request.
MPLS VPN and VPLS are 2 technologies meant to address to different needs, L3 VPN as opposed as L2 VPN. Not completely sure how you would compare them in terms of performance. Would you compare the performance of a F1 racing car with a Rally racing car?
From the ISP point of view there is little difference (if we don't want to consider the specific inherent peculiarities of each technology) , as in the very basic scenarios we can boil down to the following basic operations for both:
Ingress PE impose 2 labels (at least)
Core Ps swap top most MPLS label
Egress PE removes last label exposing underlying packet or frame.
So whether the LSRs deal with underlying L2 frames or L3 IP packets there is no real difference in terms of performance (actually the P routers don't even notice any difference).
About simulators, I am not aware of anyone able to simulate a L2 VPN (AtoM or VPLS).
Riccardo

Issue in configuring the End to End Monitering.

Hi,
I was trying to configure the end to end monitering in RW, and it is askin for uid and password, on applying them , it is not opening , and giving a messege as
Unable to read the current configuration for the selected XI domain because the system was unable to estable a connection to the monitoring server (possibly due to incorrect logon data). Error message: Unable to log on to system isrxidev in language en with user PISUPER.
What should i do? I am a super user.I hav all authorisations!Is this my role, or a basis / administrator role, tell me the solution, i need to check full end to end status of a messge from source point to target point.
Also, how do I set up the PIPELINE configuration. Any settings required in SICF transaction to see the different stages of a messege in sxmb_moni. Mine is a file to idoc scenerio, and in sxmb_moni i can only see the
Inbound Messege
Receiver Grouping
and
Response.
I was expecting to see the status at Receiver determination and interface Determination!
Arnab Mondal

Login with PIRWBUSER for end to end monitoring..
Follow these steps :
http://help.sap.com/saphelp_nw04s/helpdata/en/06/5d1741b393f26fe10000000a1550b0/frameset.htm
Still problem exists then go thru the below thread
End-to-End Monitoring
Check whether all CIF services were activated in Visual Admin

End to End Monitoring

Hello,
I have implemented this scenario :
"Flat file ->mapping->BPM (for calling a bapi)->mapping->Flat file" and when i use the message monitoring sometimes end-to-end monitoring is available and sometimes not, Why ??? Is there a specific configuration for enable end-to-end monitoring in any case ?
Regards
Vincent

Hi,
What error do you get ? I consistently get this error :-
Service cannot be reached
What has happened?
URL http://axonlabs11.axonlabs.co.uk:8000/sap/bc/bsp/sap/spi_monitor/monitor.do call was terminated because the corresponding service is not available.
Note
The termination occurred in system XI3 with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:axonlabs11_XI3_00-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
Kind regards
Colin.

End to End Excise duty process ..?

Hi all
Can anybody explain me the step to be carried out after below steps in excise duty proces (CIN process ).
1.Created PO with Excisable material,-ME21N
2.GR done for excise material PO -MIGO
3.Capture and post Excise invoice -J1IEX
4.Now i have checked in J2I9, its showing opening balance-X amount and closing balance as X amount. Credit availed for this month is Y amount.
How to proceed further to complete end to end excise transaction .
5.How to utilise the amount....?
6.How to pay the duty payable to CENVAT office .
Explain step byt step to complete entire Excise duty scenarion (CIN scenario).
Thanks
Sap-mm

Duplicate Post of: /thread/1550764 [original link is broken]

End - to - End scenario of IDoC

Similar Messages

Maybe you are looking for