End User Can Not Open A Form within Responsibility

Hi to all,
I have an end user who tries to click on a form within a responsibility. And the form does not launch. As matter of fact, the browser green progress bar does not show up. There are other forms within that same responsbility that she is able to launch.
This end user was not having this issue before. She was able to launch any forms under any responsibility without any issue.
I tested the same responsbility and same forms on my machine as was able to launch without any issue.
These are the following conditions the end user has:
IE 7
Jinitiator 1.3.1.29
I tried the following steps to remedy the issue:
Cleared cache and cookies.
Clear jar cache
Did not fix the problem
Reinstalled Jinitiator
Did not fix the problem
I turned on the show java console and show exceptions dialog box on end user jinitiator. When I go back and click on the problematic form, no java console shows up, nor does any exceptions dialog box.
Does anyone have an idea, why this may be occurring and how to resolve this issue.
Thanks
F. Lucio
Edited by: Ferreira Lucio on Oct 9, 2009 1:15 AM

Greetings Hussein,
I worked on your recommend steps, and still unable to resolve issue:
Try opening the form using your username from the user's machine, and do the same with this specific user from some other machine.
I logged onto oracle with my credentials, and went to the same responsibility and form. This issue happens to me. But when I go back to my local machine. I have no problems.
Did you try using some other browser on the user's machine (for example, Firefox)?
I installed firefox, but everytime I click on a form, it tells me to download jinitiator.
Any recent changes have been done on the user's machine or in the user's profile options?
Unsure what profile options have changed for user
Note: 310961.1 - How To Enable The Java Console Jinitiator 1.1.8 and 1.3
Note: 232651.1 - How to Enable Tracing in Jinitiator
If none of the above helps, obtain FRD and see if you get more details about the error -- See (Note: 150168.1 - Obtaining Forms Runtime Diagnostics (FRD) In Oracle Applications 11i).
I uninstalled jinitiator, then reinstalled. Turned on java console and enabled tracing. Console/tracing does not come up for this form. On other forms it does.
I uninstalled jinitiator a third time. Then reinstalled. What I notice is that jinitiator still has the java console checked and tacing parameters set. What I believe could be happening is the jinitiator is not being uninstalled completely.
Where or how can I check if the jinitiator gets removed completely.
I have check the control panel and jinitiator is not there. I also check HKLM and it is not there also.
Any ideas how to move forward.

Similar Messages

LC Rights Management End User can not find groups or users during policy creation process

hello,
I'm using LC8.0.1 turnkey install on win2003 box.
Problem is LC Rights Management End User can not find groups or users (search result is empty) during policy creation process, thus can not apply specific restriction to certain groups or users.
I have create a user in the DefaultDom and assigned the following roles:
Live Cycle Rights Management Invite User
Live Cycle Rights Management End User
How can I allow the above created user to search for groups and user during policy creation? Thanks.

Good catch Phuc. Make sure you do this for each Policy Set as well as My Policies.
Here's an overview of Policy Sets:
http://blogs.adobe.com/security/2008/04/delegating_control_over_policy.html
Cut and paste the URL.

When I attach a document and send as an email, non apple users can not open it?

For my business I have to send invoices to customers, When I attach the invoice to an email non apple uses can not open the file? why is this.
I have tried to copy and paste the invoice to body of email and when they get it it appears as a question mark in a box?
how can I fix this?

Couple of thoughts.
When you have the Mail compose window up, there should be a row of icons along the top right side. One of these is a paperclip for attachments. Click it, and check the Send Windows-Friendly Attachments. This will help for non-Mac Mail recipients. Ultimately, it will be their email system, and how it is configured that will determine how their attachments arrive — not you.
Send your invoices as PDF, not Pages, or Word content. Since you don't mention your operating system or release of Pages, I will cover the bases here:
Pages '09
One can use the Share menu to send a PDF via Mail. It does the export to PDF, opens Mail, and attaches the PDF. (Broken in Yosemite).
File ▸ Export ▸ PDF…, and then drag/drop the PDF into a Mail compose Window. If document size, right-click on it and choose View as Icon.
Pages v5
On the right-side of the Toolbar, there is a Share icon. Choose Send a Copy > Email > PDF. This auto-attaches to a new Mail compose window.
File ▸ Export To ▸ PDF… . Same as Pages '09, second bullet.

Is there a way to lock a file so that users can NOT open while Testing?

Hello World:
I'm sure there is a way but I can not think of a good solution right now.
I'm writing to a file.csv every 2 seconds for about 10 hours or more.
If a user opens the file to view, then my program in Labview will crash
because is being used.
How would you solve this problem?
thank you very much...for your help...
\\carlos

Look up the function to Get and Set File permissions. This will allow you to lock the file when you start and unlock it when your finished. =o)
Here's the sample from the help file:
The Set Permissions function includes a permissions input that allows you to control access to files and directories that you create. To define the permissions you want to set, you can wire the permissions output of the Get Permissions function to the permissions input of the Set Permissions function, or you can wire a constant or a control.
The 9 bits that the permissions parameter uses are divided into three sets: user, group, and others. Each set is divided into three permission categories: read, write, and execute. Read determines if members of a set can read a file or directory. Write determines if members of a set can write data to a file or directory. Execute determines if members of a set can execute the file. A 1 in the bit grants permission.
For example, the following illustration shows how to grant a user permission to read from, write to, and execute a file, and deny permission from the other two sets.
Octal format shortens each three-bit group within the parameter to a single octal value. (Windows) For example, to make a file read-only, enter the octal value 200, which corresponds to the binary representation 10000000. (Linux) To grant users read, write, and execute permissions, enter the octal value 700, which corresponds to the binary value 111000000.

Why user can not open Production Order form with readonly privilege?

hi guys,
today I got a problem when I assign the minimize privilege for a new user.
the user only want to query status about Production Order, so I assigned the privilege with readonly on Production Order, and disabled all others.
But when user logged on, and click on the 'Menu -> Production -> Production Order', there pops up an error message said 'To generate the document, first define the numbering series in the Administration module'.
Do I have to find some other privileges to assign for the user account?
thanks for your help.

Thanks.
But there were 10 groups look like from 'Series - Group No. 1' to 'Series - Group No. 2', How did I know which one was assigned to Production Order?

Can not open pdf forms in Firefox

We have pdf qoutationforms that can no longer be opened whenusing Firefox. (The files opened fine till a few weeks ago). When we click the link it just say stopped in the left corner and after a minute or two Acrobat Reader opens up with the following error message "A file I/O error has occurred. The file connection timed out." The file opens fine in Safari and Internet Explorer.
The two forms are here A file I/O error has occurred. The file connection timed out.

I did try the link, it includes 2 pdf s on that page I did successfully load in firefox, and also downloaded to my computer, so that rules out the site being faulty or the pdf file itself.
* ( small 1MB pdf, it did seem to take a while, maybe the site is slow/busy)
* see [[Error loading web sites#w_interrupted-or-reset-connection]] - Interrupted or reset connection
* Are you still getting the error messages you mentioned in the original post ?
As a workaround for that particular form, I note it is merely there to complete details and gives the option of attaching it to an email. You presumably will already be in a position to do that.
Regarding the '''link you quote and the 2 pdfs '''
# are you able to download them to your computer, can you confirm again that you did that ?
# do those specific pdf files open on your computer with your adobe reader ?
# confirm, or otherwise, do other pdf files open with firefox, ''' when those pdf files are saved on your computer'''
# what version of reader & plugin are you using, is it the latest version (mine is 9, that worked)
See also
* [[Troubleshooting plugins]]
'''From what you are saying you appear to have a problem with the plugin.''' If you are unable to open the pdf with firefox when it is on your computer it is unlikely firefox will open that pdf on the webpage

Can not open database object from the form builder

Hi
i have this message
PDE-PXC002 Program unit execution aborted due to unhandled exception(904).
PLS I need some one to help me.
when I try to connect as system or sys or scott user its oben properly, But when i try by another user its not work.

YES THAT RIGHT AND I KNOW THAT BUT THE x USER CAN NOT OPEN THE DATABASE OBJECT TO GET OR VIEW OWN OBJECTS
ONY OTHER USER CAN OPEN THE DATABASE OBJECT BUT x USER CAN NOT OPEN THE DATABASE OBJECT IN THE NAVIGATOR FORMS.

Can not open the ebs form

This issue is that i can not open the form ,I checked the application.log,find erro:
09/04/24 12:21:50.201 10.1.3.0.0 Started
09/04/24 12:21:51.470 formsweb: FormsServlet init():
configFileName: /oracle/prod01/inst/apps/PROD01_erp199/ora/10.1.2/forms/server/appsweb.cfg
testMode: false
09/04/24 12:21:51.479 formsweb: 10.1.3.0.0 Started
09/04/24 12:34:28.975 formsweb: ListenerServlet init()
09/04/24 12:34:30.17 formsweb: Forms 会话 <1> 在启动过程中失败: 没有来自运行时进程的响应
09/04/24 12:34:30.17 formsweb: Forms session <1> exception stack trace:
oracle.forms.engine.RunformException: Forms 会话 <1> 在启动过程中失败: 没有来自运行时进程的响应
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRe
questDispatcher.java:702)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(
ServletRequestDispatcher.java:359)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpR
equestHandler.java:870)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpReq
uestHandler.java:451)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.j
ava:299)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.j
ava:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(Re
leasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
here is another erro :
/oracle/prod01/inst/apps/PROD01_erp199/logs/ora/10.1.3/opmn/forms_default_group_1、formsstd.err
Error: <connector name="OracleASjms" path="OracleASjms.rar" /> will not be bootstrapped since corresponding module declarati
on was not found in application.xml.

Thank you hsawwan ,I did it as your methods,and i also checked your thread,but I still have the same problem.
when I start the formserver ,here is the erro:
[[root@erp29 ~]# more /oracle/prod/inst/apps/PROD_erp29/logs/appl/admin/log/adformsctl.txt
adformsctl's LOG:
04/28/09-09:04:52 :: adformsctl.sh version 120.12.12000000.3
04/28/09-09:04:52 :: adformsctl.sh: starting OPMN if it is not running
opmnctl: opmn is already running.
04/28/09-09:04:55 :: adformsctl.sh: Starting OPMN managed FORMS OC4J instance
opmnctl: starting opmn managed processes...
================================================================================
opmn id=erp29:6200
no processes or applications matched this request
04/28/09-09:04:55 :: adformsctl.sh: exiting with status 150
================================================================================
adoacorectl's LOG
04/28/09-09:04:51 :: adoacorectl.sh version 120.11.12000000.2
04/28/09-09:04:51 :: adoacorectl.sh: starting OPMN if it is not running
opmnctl: opmn is already running.
04/28/09-09:04:51 :: adoacorectl.sh: Starting OPMN managed OACORE OC4J instance
opmnctl: starting opmn managed processes...
================================================================================
opmn id=erp29:6200
no processes or applications matched this request
04/28/09-09:04:52 :: adoacorectl.sh: exiting with status 150
================================================================================
adapcctl's log
04/28/09-09:04:51 :: adapcctl.sh version 120.6.12000000.2
04/28/09-09:04:51 :: adapcctl.sh: starting OPMN if it is not running
opmnctl: opmn is already running.
04/28/09-09:04:51 :: adapcctl.sh: starting OPMN managed OHS instance
opmnctl: starting opmn managed processes...
================================================================================
opmn id=erp29:6200
no processes or applications matched this request
04/28/09-09:04:51 :: adapcctl.sh: exiting with status 150
================================================================================

Can not open Form Builder

Hi Friends!
I am using Form 6i (Client) and Oracle 8.1.7. I have been using these for the past 2,3 months. Now suddenly I got a problem with my Forms Builder. I can not open the Form Builder. It's opening but can't maximize. It is not even showing any error message also. I tried many ways by installing the latest Java jre file and also restarting my pc many times, but still cannot open the Form Builder. I have no back up copy of Forms6i so I can't reinstall.
Can anyone help me, what I should do now?
Thanks

Are you using Windows NT? I have had problems in NT with disaparing windows, windows which was started outside of monitor range, or windows which only could be maximized from right-clicking on then in Windows toolbar (bottom of the screen). Mostly I'd to try to move the application using the cursor keys.
A new version of Forms6i is found here:
http://www.oracle.com/technology/software/products/forms/index.html
Regards,
Martin MalmstrÃ¶m

Can not open forwared email notifications

Some users can not open the workflow email notifications forwarded by another user, some users can. Anything particular that I should look into? We have 2 middle tiers.
Thanks in advance!

Is there an error message associate to this? Is this with the e-mail notification or with worklist notification?

I can not open documents using adobe reader because I have to accept "end user agreement". How do I get to agreement?

I can not open documents using adobe reader because I have to accept "end user agreement". How do I get to agreement?

thx but the only thing that happens when I open Adobe Reader is that a small icon appears in the bottom-line. There is no dialogue box where I can accept!

I can not open my Safari. It quits unexpectedly. The issue happens with a single user account. It does not happen to anyone else in my family. Please help.

I can not open my Safari. It quits unexpectedly. The issue only happens to a single user account. It does not happen to anyone else in my family. Please help!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful.

I can not open adobe files. mainly ones that end in doc. I purchased the 19.99 to convert .doc files

I can not open adobe files that end in .doc. I purchased the 19.99 to convert doc to pdf and I still cant open. I get an error reading.

Hi,
Which Adobe Service did you purchased?
If you have purchased CreatePDF please visit: https://createpdf.acrobat.com/SignIn.html
Sign in with your Adobe ID and password, and then convert your word doc into PDF.
Please let me know if that works.
If you have Adobe Reader, you cannot convert .doc file to .PDF by drag and drop.
~ Aditya

Can not open pdf under my user id

Would like to know why I can not open a pdf file under my user id. Using the same computer, I change to my wifes user id and can open pdf files. I have to email my pdf files to her on the same computer to open them. I have reinstalled the latest ver of adobe reader many times and still can not figure it out.
Ron

Sorry, but I don't follow you. One does not need a user ID to open PDF files using the free Reader.

I can not open a filled out pdf-form using Adobe Acrobat Pro X

I have a form in Indesign CS 5.5 and made it fillable with Adobe Acrobat Pro X. I enabled the 'additional features' to make the document a 'Reader extended pdf'. Whoever I send the form now, can fill it out and save it in (the free version of) Adobe Reader.
Problem is: when the recipients mail the filled out form back to me, I can not open the document. There is message that says: "There was an error opening this document. The file is damaged and could not be repaired."
However, when I receive the filled-out file not by email (MS Outlook on a IMac) but on a USB-stick or something, I can manage to open the document the way it was filled out.
I'm guessing something goes wrong in the mailing process...
Can anyone help me please?
Thanks!

Thanks for the advice!
I'm afraid though that the problem is situated with the provider of the sender (when I open the email with my hotmail or gmail-account, it' s the same problem).
The idea of compressing the forms into zip-files is not very usefull because - i'm guessing - 90% of the recipients have never heard about a zip-file and are surely incapable of making one.
Some other ideas?
Thank you though!

End User Can Not Open A Form within Responsibility

Similar Messages

Maybe you are looking for