End user can't see the KM content

Hi,all
If the end user can't see the KM content(pictures,text documents)
what may e the problem?On my pc all is working fine.
May be it depends on InternetOptions->Security options on
specific computer?
Regards,
Michael

Hello Michael,
1> Are you an end user as well/
2> Try and chek the permissions of each Km content i.e pictures, text, documents.
If the end user does not have rhe permissions then you will have to assign the permissions before the nd user could see rh content
Thanks
Pradeep Bhojak

Similar Messages

After changing a mail list name in Server end, users can't see the update in outlook client

Dear all,
This is a real issue. I am a Help-desk in a global company and after changing a mail list name in Server end, users can't see the update in outlook client. Even I download Offline address book in full detail, user still can't see the change in her outlook.
Does anyone know how to fix it?
Thanks,
Franklin hong

Hi,
Would you please detail what you did by "changing a mail list name in Server end"? What is the mail list and what server?
If you switch to Online Mode instead of Cached Exchange Mode, does the user see the change?
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

A user can only see the public area in a collaboration room

Hi all,
We have experienced that a certain user can only see the public area of
a collaboration room although the user has member rights to see more
content.
We have tried to remove the user from the room and add him again. It
did not help.
Other users have been added before and after this user without problems.
What could be wrong with this user?
Regards,
Ashwin

Hi Ashwin,
Check the roles and the groups by this user.. Is the same of the others users?
Regards
Eduardo

TS3276 Having trouble sending jpeg images as attachments in Mac email.....they go thru as images and PC users can't see the SAVE or QUICK LOOK boxes that Mac mail has. One friend scrolled over the image, right clicked on it and saved as a PNG file.

Having trouble sending jpeg images as attachments in Mac email.....they go thru as images and PC users can't see the SAVE or QUICK LOOK boxes that Mac mail has. One friend scrolled over the image, right clicked on it and saved as a PNG file.

Apple Mail isn't going to change the format of any of your attachments. it isn't going to corrupt them either.
Exchange is a transport protocol and server. The issue you describe is not related to Exchange.
There are many different versions of Microsoft Outlook in use and they all have e-mail bugs. Different versions have different bugs. Some Apple Mail hack to get around a bug in Outlook 2003 may cause the same message to be problematic in Outlook 2000. Fix them both and another issue will cause trouble in Outlook 2007. You can't fix this. Apple can't fix this. Microsoft can and has but that is irrelevant if your recipients are using older versions.
One specific problem is that Apple Mail always sends image attachments inline, as images, not as iconized files. You can change this with Attachment Tamer. Just be aware that use of this software will break other things such as Stationery. E-mail is just a disaster. To date, no one outside of Apple has ever implemented the e-mail standards from 1993. Apple has continually changed its e-mail software to be more compatible with the de-facto standards that Netscape and Microsoft have unilaterally defined and people documented as "standards" after the fact. The e-mail messages that Apple Mail sends are 100% correct and do not violate any of the original standards from 1993 or the Microsoft/Netscape modifications. The problem is entirely bugs and limitations in various versions of Outlook.

Why othe user can't see the logo I just placed as background?

Hello,
After putting a logo in the background as the manager, why other user can't see the logo?
Many thanks

Hello to both,
I load the logo by General Settings- Font and Bkgd.
It would be very time consuming to add the logo to each user. That is not very wise.
Is there other way to get the users to see the logo?
Many thanks to both for your prompt reply

Other user can not see the data from the workbook

Hi Friends,
I created a workbook with some worksheets in a Business area. The owner of the workbook has no problem to view all the worksheets and get all the data returned.. I granted all the neccessary privileges to other users ,they could see the workbook, but no data returnd for the query results. Tried refresh the worksheet, same no data retrieved.Checked the SQL inspector and the plan, it showed the correct paths and execution plan without any errors there. The same query run in SQL plus by other users returned data correctly.
By the way, I had a summary folder in the workbook. During the troubleshooting, I dropped this summary folder, still the same no data return for other users.
Any body happen to know the cause or has some ideas on this issue?
The discoverer administrator verson is 9.0.4.00 and the PLUS /Viewer is 9.04.45.02.
Thank you very much,
J.K

Hi All
The scheduling of reports, as you have probably noticed, requires that the scheduling privilege within Discoverer Administrator tool be granted to the user NOT to a role. Scheduling will not work if you attempt this. The reason for this is that these two SYS grants must go to a user:
GRANT SELECT ON SYS.V_$PARAMETER
GRANT EXECUTE ON SYS.DBMS_JOB
The user will also need to have these grants:
CREATE PROCEDURE,
CREATE TABLE,
CREATE VIEW,
EXECUTE ANY PROCEDURE,
UNLIMITED TABLESPACE on user's tablespace
My new Discoverer 10g Handbook, which I would recommend to anyone working with Discoverer, explains scheduling in detail and even tells you how the tables and views that are used to store the results work. You won't find this information anywhere else, as you will see if you read some of the five reviews that have been left on Amazon.com. For more information about the book please look here:
http://learndiscoverer.com/books/books.htm
The PUBLIC grants are not having any impact. All these do is ensure that ALL users have the same basic privileges. You can just as easily grant these to any role of your choosing and it will work just fine.
By the way, because the PUBLIC role is the MINIMUM privileges that a user can have you might want to consider reducing the end user Discoverer privileges afforded to PUBLIC. By default, all users can Create and Edit workbooks, share workbooks, save workbooks and so on. This is far too rich a set of privileges for the basic user, who in most cases will be a VIEWER user. Whenever I create a new EUL I always recommend that my client reduces the PUBLIC user's privileges and then create new roles for more advanced VIEWER and PLUS users, adding privileges as required.
Thus, my basic VIEWER, aka PUBLIC, has only these privileges:
Collect Query Statistics
Item Drill
Drill Out
My advanced VIEWER has this additional privilege:
Save Workbooks to Database
My basic PLUS user has all of the above, plus these (pardon the pun):
Create/Edit Query
Create Link
and my advanced PLUS users get everything, which means they now get these as well:
Grant Workbook
Schedule Workbooks
I also remove the Save / Save As Actions link from Viewer which prevents the basic VIEWER users from knowing that it is there. In essence, because these users no longer can click the Save link and because they do not have the Save to Database privilege, they will not be prompted to save within Viewer no matter what they do. This now makes 10.1.2 Viewer work the same way as previous versions.
Even though the Save link is not there, my advanced Viewer users will be prompted to save if they have made any changes. This therefore allows you to have two classes of Viewer, one who can save and one that cannot.
I hope this helps
Regards
Micahael Armstrong-Smith

HT1349 The mail message content is not visible! I can't see the mail content.

Can't see the content of mail messages.

Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Or...
Double tap the home button to bring up the Recents List
Tap and hold any icon until it wiggles
Press the red to delete the Mail app
Press the home twice button when done.

End users can't see his/ her isssues

Hi All:
My end users can't be determinate automatically at creation of message.
What is exactly the right configuration that I have to do in T-code PFAC_ RESPO, because I've create a responsibility for Level 1 Team and then I use T-Code IB52 to determine the Support Team like BP Level 1 Team.
Please if you have any clue about this post it.
Regards
Alvaro

Hi,
Did you automatically create BPs using DSWP.
To be able to identify the key user in all systems that are connected to the SAP Solution Manager, you need to supply the following ID numbers (in the role, tab) in Transaction BP.
CRM001 <System ID> <Installation Number> <Client> <User Name> (separated by a space, for example, XYZ 1234567890 800 DEMOUSER).
Hope this will solve your problem.
Feel free to revert back.
--Ragu

Problem with role and user; user can't see the table

Hello forum,
I've created a role:
CREATE ROLE enr_service;
GRANT CONNECT TO enr_service;
GRANT ALL ON Locataires TO enr_service;
GRANT ALL ON Batiments TO enr_service;
GRANT ALL ON Sportifs TO enr_service;
GRANT SELECT ON Epreuves TO enr_service;
and also a user:
CREATE USER ENR1 IDENTIFIED BY password QUOTA UNLIMITED ON USERS;
GRANT enr_service TO ENR1;
ALTER USER ENR1 DEFAULT ROLE enr_service;
ALTER USER ENR1 DEFAULT TABLESPACE USERS;
I can connect to the database with this user but when I try to query a table he's been granted access to I get an error message:
SELECT * FROM Sportifs;
ORA-00942: table or view does not exists
I can't see what I've done wrong. Any help is appreciated.
Sebastian

user2019788 wrote:
Hello forum,
I've created a role:
CREATE ROLE enr_service;
GRANT CONNECT TO enr_service;
GRANT ALL ON Locataires TO enr_service;
GRANT ALL ON Batiments TO enr_service;
GRANT ALL ON Sportifs TO enr_service;
GRANT SELECT ON Epreuves TO enr_service;
and also a user:
CREATE USER ENR1 IDENTIFIED BY password QUOTA UNLIMITED ON USERS;
GRANT enr_service TO ENR1;
ALTER USER ENR1 DEFAULT ROLE enr_service;
ALTER USER ENR1 DEFAULT TABLESPACE USERS;
I can connect to the database with this user but when I try to query a table he's been granted access to I get an error message:
SELECT * FROM Sportifs;
ORA-00942: table or view does not exists
I can't see what I've done wrong. Any help is appreciated.
SebastianThat's probably because ENR1 doesn't have any table named SPORTIFS and he didn't qualify the table name with the schema name ...

Some users can not see the projects screen

We have a team trying to use project online. Two of us can click on on the projects tab and see the two rows of icons and the projects beneath 3 others get the following :
Web Part Error: An error has occurred. Correlation ID: 68b7cd9c-207e-1000-a3d4-c2ead0781856.
I've reviewed the credentials of those who can see it and those who can not and there are no obvious differences.
Does anyone have any thoughts on this and/or how I can see the logs on a remote Sharepoint Installation?
Alan

Hi Alan,
Is the error occuring in the Project Center?
Can you post a screenshot so we can have a better understanding of the issue?
Since everything looks right for you, can you do a delegation session for the users who have the issue and check if you can see the issue?
Can they alos try with another browser than IE?
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Connection to a 10g failed. Can't see the window content on the client.HELP

Dear Sir or Madame
it seems to me that here are the experts in Oracle's 10g in connection with Mac's.
I've got the following problem:
Our firm has a new 10g Release2 (10.1.2.02) server, based on windows technology.
If I'm logging on with a Win-PC (via VPN->server-address) the Oracle jinit-installer runs and installs some files. So far so good.
When I'm logging on with my G5 (OS X 10.4.2) no installer runs. Is the jinit-package included in OS X ? If yes than there is an other problem.
I type in my username and pw. The new window with the database-front is opening. But the only things I can see are some buttons without symbols or letters in it, the startup-window of the database normally contains some text, but there is no text.
How can i resolve the problem to see the content of the windows?
PLEASE ANSWER TO: Sebastian.Engler @t-online.de
Regards
Sebastian

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

When I open bookmarks the actual sites sometime do not show just the black screen with the safari icon while others show the actual site how can I see the actual content

I use Safari Mt Lion and when I view Bookmarks, the entire list of bookmarks show uo but on the display portion only the black screen witht the Safari icon shows while other bookmarks show the actual photo of what that bookmark is so unless I click on the bookmark on the blank ones I can not see what it is, it is inconvient because I have hundreds of bookmarks and I can not remember what I was bookmarking it for unless I can see it

Hi
I understand - sorry to have missed your point before now.
Some sites don't display those previews in safari - secure pages (https) for one, and also sites that are redirected.
Taking the example in your screenshot, the site http://fabulouslyartsy.blogspot.com/ actually redirects to http://www.fabulouslyartsy.com/ and Safari (rather annoyingly) doesn't 'follow' the redirection & show the appropriate preview. See the image below - the blank preview is for the blogspot address, and the one visible to the right is from going directly to the site.

Can't see the fit content to frame option....

Hi All,
I'm having some issues trying to click on:
Object > Fitting > Fit Content to Frame
This area is simply greyed out and I cant' select the option to do so.
Does anyone have any ideas?
Thanks
Daniel

I just wondered if you can please advise how I could click a button and have the text within the text box automatically resize to fit the frame?
This is not a built-in capability of InDesign. Macinbytes told you that this was the case, and John told you why.
However, InDesign has a scripting interface, so plenty of people have written additional tools to make particular tasks easier. I think that one of these scripts from In-Tools will be exactly what you're looking for.

How can I see the contents in a Ref Cursor

I have this code:
CREATE OR REPLACE PACKAGE APOD_LOG.APOD_C3_LOG_API_PKG
AUTHID CURRENT_USER
AS
type rc is ref cursor;
PROCEDURE Fetch_Log_Spec
in_LOCAL_IP_VALUE IN BINARY_INTEGER,
out_RESULT_SET OUT rc
END APOD_C3_LOG_API_PKG;
CREATE OR REPLACE PACKAGE BODY APOD_LOG.APOD_C3_LOG_API_PKG
AS
PROCEDURE Fetch_Log_Spec
in_LOCAL_IP_VALUE IN BINARY_INTEGER,
out_RESULT_SET OUT rc
IS
BEGIN
DBMS_APPLICATION_INFO.set_module(module_name => 'APOD_LOG.API_PKG',action_name => 'Fetch_Log_Spec');
DBMS_APPLICATION_INFO.set_client_info(client_info => 'Calling with in_LOCAL_IP_VALUE = ' ||to_char(in_LOCAL_IP_VALUE));
open out_RESULT_SET for
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.100.1''') as MULTICAST_IP_VALUE
from
dual
union
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.200.1''') as MULTICAST_IP_VALUE
from
dual
union
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.100.123''') as MULTICAST_IP_VALUE
from
dual
union
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.200.123''') as MULTICAST_IP_VALUE
from
dual;
DBMS_APPLICATION_INFO.set_client_info(client_info => 'Called Fetch_Log_Spec '||to_char(SQL%ROWCOUNT)||' row(s) returned with in_LOCAL_IP_VALUE = '||to_char(in_LOCAL_IP_VALUE) );
END Fetch_Log_Spec;
END APOD_C3_LOG_API_PKG;
And I am trying to test it like this:
DECLARE
IN_LOCAL_IP_VALUE BINARY_INTEGER;
OUT_RESULT_SET APOD_LOG.APOD_C3_LOG_API_PKG.rc;
BEGIN
IN_LOCAL_IP_VALUE := 23374048;
-- OUT_RESULT_SET := NULL; How do I see this
APOD_LOG.APOD_C3_LOG_API_PKG.FETCH_LOG_SPEC ( IN_LOCAL_IP_VALUE, OUT_RESULT_SET );
END;
How can I see the dataset returnd by the OUT_RESULT_SET in SQLPlus or Quest ScriptRunner?

A ref cursor doesn't really contain rows but you can use them to reference a SQL statement that fetches the rows.
Re: returning resultset from procedure...or pkg

When I load pages with video contents like m3u8 I can't see the content from firefox because it says "video format or MIME type is not supporte"

When I open a link like this:
http://video.gazzetta.it/puntata-milan-kaka-fa-fuori-faraone/4494065a-13b0-11e3-a11e-38d7c867cc00
I can't see the video content and I get this error message: video format or MIME type is not supported
I have adobe flash updated
I tried to reset firefox
I have vlc installed
I can correctly see this link with internet explorer. This is a PARADOX!
Can somebody help me?

I see that message when the Flash plugin is disabled.<br />
If the Flash plugin is enabled or set to click-to-play then a Flash player plays the video.<br />
Otherwise a video tag is created with a link to an m3u8 stream that Firefox apparently doesn't support.
You can try to disable all other plugins that deal with media files (start with VLC) to see if that helps.

End user can't see the KM content

Similar Messages

Maybe you are looking for