End user login to CI server

Hello,
In R/3 landscape there are 4 Application servers and CI Cluster (2 separate servers) and DB Cluster (2 separate servers)
In one of the CI Server, Message server and Enrique server is running. (allocated virtual IPs for this MSG server & ENQ server)
(End user will connect to the message server)
So when a request comes to message server, it will direct the request to one of the Application servers.
So according to the setup, all the users should reside in the Application servers. End- users are not allowed to login to CI server.
Only BASIS admins can login to this.
But when checking using al08, time to time it shows few users are login to this CI server (erpcv)
How this happens, Is that a problem with the message server or any other issue !!!
regards,

You need to configure your servers in logon groups (SMLG) and distribute the correct logon groups to the users.
My assumption, There may be few users have SAPGUI points to directly to CI.
We also have 4 apps and 1 CI/MS and DB as cluster, but have allowed users to logon to all the servers (4 apps + 1 CI) this is due to nothing is running on CI+MS and technically speaking waste of CI resources if you are not allowing users to logon and using system.
Don't worry SMLG (load balancing) will take care of distributing the load.

Similar Messages

GRC AC 10.1 - End User Login - Request issue

Hi experts!
Im working in GRC AC 10.1 SP07. I have configured END USER LOGIN services; the idea is that end user from ECC system could submit request without having user in GRC box, this is working fine but i´m experimenting next problem.
When i go to search request, those request submited by end user appears like created by Z_END_USER, this is the user in GRC that i have configured in services GRAC_UIBB_END_USER_LOGIN and GRAC_OIF_REQUEST_SUBMISSION_EU.
¿Is possible to configure that request appears "Created By" the requester and not the service´s user? I don´t think so, but if not, ¿is there any way to add the column User ID in Result screen? because it is avaible in parameters search but im not being able to add this in result screen (it´s not like hidden neither).
Parameters "Created by user ID" would be service´s user and "User ID" would be the requester.
Thanks!
Emiliano

Hi Emiliano,
Your understanding is correct, request created by UserID will always show GUEST UserID configured in the End User Logon service.
In search requests there is option to search requests by UserID but the same field has not been enabled to be available in Search Request result screen. This is as per standard functionality. You can check with SAP or can work with ABAPer to make the UserID column as display field in Search Request results.
Regards,
Madhu.

End User Login Message

Hi Folks,
Our production IDM setup has 3 IDM instances sharing the same repository. The IDM End user is used for setting passwords in IDM and LDAP.
Recently, couple of users have reported this error while trying to log in into IDM end user login page.
"Your password has expired for account xxxxxx. Please change it now.
Item User:xxxxxx was not found in the repository, it may have been deleted in another session."
I had seen an earlier posting on this but there were no answers. Does any have a clue why this happens?
Any lead will be greatly appreciated.
Thanks in advance!
Suvesh

Hi shivjansi,
This is normal behavior for the service desk. It gives end-users a limited UI compared to the ticket processors. Unfortunately the features of the limited UI are hardcoded so you cannot configure the UI so that end-users get two tabs while a ticket processor gets all six tabs. This may change in SolMan 7.1, let's hope so
SolMan determines if a user is an end-user by checking the auth object
CRM_TXT_ID
Activity <ACTVT>: 02
Text ID <TEXTID>: SU15
If the auth check for this auth object fails, then the user is considered to be an end-user and they get the limited UI.
Good luck!
Jon

Where are the ID and Password fields in End User Login ?

Hi:
I need to modifiy the ID / Password labels of the end-user login. I searched it in the WPMessages.properties, but i only find the variable UI_PWD_LABEL, and if i change it, it saw in the Admin Login but not in the User Login.
Any idea?
Thanks,
MJ.

Please tell us your first name and update your forum profile with it to help us. Thanks.
The first process sets a convenience cookie with the value the user entered in the username field. This is a session cookie. The code is all there. It has nothing to do with the topic of your post.
The Login process calls the apex login API. This performs authentication and does session registration and sets another cookie for session management.
Where usernames and passwords are stored depends on the type of authentication you have chosen and this is recorded in the Authentication Function attribute of the authentication scheme. For Application Express authentication, the account information is in the table wwv_flow_fnd_user. You might also use your own tables for this, or LDAP, or SSO, ...
Scott

CUPS 8.0 end user login issue

Hi All,
I am having CUCM 7.1.5 and CUPS 8.0(4) installed. The problem is when I tried to login the CUPS user page the it says "login failed". The CUPS intergration with CUCM seem to be fine because all the end users can be seen in CUPS. But I am not able to login the CUPS user page. Users have needed roles assigned to them.
CUCM is sycronized with LDAP server over SSL
Can anyone pls help me on this. What else I need to check? Is there any log to check on CUCM or CUPS?
Thanks

Hi Ronak,
It is not the problem login to the CUPC (still I didn't tried it), I have problem login to the CUPS User Web page using end user credentials in CUCM
End users have needed roles assigned and they also are CUP enabled users
Pls can you suggest me to any thing to check, As I said our CUCM is sycronized with LDAP server over SSL
Thanks

Multiple users login to 1 server when there are 2?

This causes high utilization on 1 server every day and very slow logins. How can I fix this?
Novell Netware, V6.5 Support Pack 9 - Developement Internal Release
Support Pack Revision 09
(C) Copyright 1983-2008 Novell Inc. All Rights Reserved. Patent Pending.
Server Version 5.70.08 June 15, 2010
Novell eDirectory Version 8.8 SP5 SMP
NDS Version 20505.07 September 22, 2010

This is the first server. I had to cut the log short...
Novell File Server Configuration Report For Server: XYZ
Novell File Server Configuration Report Created: Thu, Jun 23, 2011 9:38 am
Novell File Server Configuration Report. [Produced by CONFIG.NLM v3.10.17]
Novell NetWare 5.70.08 June 15, 2010
(C) Copyright 1983-2008 Novell Inc. All Rights Reserved.
Server name...............: XYZ
OS Version................: v5.70
OS revision number........: 8
Product Version...........: v6.50
Product Revision Number...: 9
Server Up Time(D:H:M:Sec).: 17:10:49:30
Serial number.............: XXXXXXXX
Internal Net. Addr........: 00000000h
Security Restriction Level: 1
SFT Level.................: 2
Engine Type...............: NATIVE
TTS Level.................: 1
Total Server memory.......: 3324.88 MB or 3486393344 Bytes
Processor speed rating....: 262763
Original cache buffers....: 850095
Current Cache Buffers.....: 227050
LRU Sitting Time(D:H:M:S).: 17:10:49:30
Current FSP's.............: 47
Current MP FSP's..........: 1320
Current Receive Buffers...: 2225
Directory cache buffers...: 0
Workstations Connected....: 7349
Max Workstations Connected: 9347
Server language...........: ENGLISH (4)
Timesync active...........: Yes
Time is synchronized......: Yes
Total Processors..........: 8
Server DOS Country ID.....: 1
Server DOS Code Page......: 437
Boot Loader...............: DOS
Top of Modules List 282 Modules Loaded.
ACPIASL.NLM v1.05.16 Jan. 16, 2007 ACPI Architecture Services Layer for ACPI compliant systems
ACPICA.NLM v1.05.16 Jan. 16, 2007 ACPI Component Architecture for ACPI compliant systems
ACPICMGR.NLM v1.05.16 Jan. 16, 2007 ACPI Component Manager for ACPI compliant systems
ACPIDRV.PSM v1.05.19 Jan. 16, 2007 ACPI Platform Support Module for ACPI compliant systems
ACPIPWR.NLM v1.05.16 Jan. 16, 2007 ACPI Power Management Driver for ACPI compliant systems
AFPTCP.NLM v2.09.01 Jun. 7, 2010 AFPTCP (Build 212 SP)
AFREECON.NLM v6.00 Feb. 28, 2006 AdRem Free Remote Console (NCPE)
APACHE2.NLM v2.00.63 Apr. 25, 2008 Apache Web Server 2.0.63
APRLIB.NLM v0.09.17 Apr. 25, 2008 Apache Portability Runtime Library 0.9.17
AUDITLGN.NLM v1.20 May. 30, 2007 Login audit
AUTHLDAP.NLM v2.00.63 Apr. 25, 2008 Apache 2.0.63 LDAP Authentication Module
BACKUPCR.NLM v20505.02 Sep. 9, 2010 eDirectory Management Tool Box DSBackup eMTool
BACKUPTL.NLM v20505.02 Sep. 9, 2010 eDirectory Management Tool Box DSBackup eMTool
BSDSOCK.NLM v6.82.02 Dec. 23, 2009 Novell BSDSOCK Module
BTCPCOM.NLM v7.90 Jul. 9, 2003 BTCPCOM.NLM v7.90.000, Build 253
BTRIEVE.NLM v7.90 Mar. 21, 2001 BTRIEVE.NLM v7.90.000
BX2.LAN v4.64 Apr. 8, 2009 Broadcom NetXtreme II Gigabit Ethernet Driver
CALNLM32.NLM v6.01.03 Aug. 26, 2008 NetWare NWCalls Runtime Library
CCS.NLM v27610.01.01 Mar. 30, 2009 Controlled Cryptography Services from Novell, Inc.
CDBE.NLM v6.01 Sep. 21, 2006 NetWare Configuration DB Engine
CDDVD.NSS v3.27.03 Jun. 7, 2010 NSS Loadable Storage System (LSS) for CD/UDF (Build 212 MP)
CERTLCM.NLM v28200902.26 Feb. 26, 2009 Novell SASL EXTERNAL Proxy LCM 2.8.2.0 20090226
CERTLSM.NLM v28200902.26 Feb. 26, 2009 Novell SASL EXTERNAL LSM 2.8.2.0 20090226
CIFS.NLM v3.27.03 Jun. 7, 2010 CIFS Semantic Agent (Build 212 MP)
CIFSPROX.NLM v3.27.03 Jun. 7, 2010 NMAS Proxy for CIFS (Build 212 MP)
CIOS.NLM v1.60 Feb. 12, 2008 Consolidated IO System
CLIB.NLM v5.90.15 Mar. 10, 2008 (Legacy) Standard C Runtime Library for NLMs
CLNNLM32.NLM v6.01.03 Aug. 26, 2008 NetWare NWClient Runtime Library
CLXNLM32.NLM v6.01.03 Aug. 26, 2008 NetWare NWCLX Runtime Library
COMN.NSS v3.27.03 Jun. 7, 2010 NSS Common Support Layer (COMN) (Build 212 MP)
CONFIG.NLM v3.10.17 Feb. 12, 2008 NetWare Server Configuration Reader
CONLOG.NLM v3.01.02 Aug. 8, 2006 System Console Logger
CONNAUD.NLM v3.17 May. 10, 2005 NLS - Connection Metering
CONNMGR.NLM v5.60.01 Sep. 7, 2006 NetWare Connection Manager NLM
CPQSHD.CDM v2.08 Feb. 19, 2008 HP NWPA SCSI Disk Driver
CPUCHECK.NLM v5.60.01 Dec. 6, 2007 NetWare Processor Checking Utility
CRLSM.NLM v2.08.01 Mar. 31, 2009 Challenge Response LSM v2.8.1.0
CSL.NLM v2.06.02 Jan. 13, 2000 NetWare Call Support Layer For NetWare
CSLIND.NLM v4.21 Dec. 7, 1999 TCPIP CSL INDEPENDENCE MODULE 7Dec99 7Dec99
DBNET6.NLM v1.45.02 Mar. 16, 2006 Debug Network IO Support
DFSLIB.NLM v3.27.03 Jun. 7, 2010 DFS Common Library (Build 212 MP)
DHOST.NLM v10010.97 Sep. 18, 2006 Novell DHost Portability Interface 1.0.0 SMP
DIAG500.NLM v3.04.03 Oct. 31, 2007 Diagnostic/coredump utility for NetWare 6.x
DLOG.NLM v6.05.04 Dec. 7, 2006 Debug Memory Log Functions
DPLSV386.NLM v1.15.01 May. 21, 2007 NetWare 6.x Distributed Print Library - DPLSV386
DPRPCNLM.NLM v3.00.17 Oct. 10, 2006 Novell NDPS RPC Library NLM
DS.NLM v20505.07 Sep. 22, 2010 Novell eDirectory Version 8.8 SP5 SMP
DSAPI.NLM v6.00.04 Jan. 27, 2006 NetWare NWNet Runtime Library
DSEVENT.NLM v6.01.03 Aug. 26, 2008 NetWare DSEvent Runtime Library
DSLOADER.NLM v20505.07 Sep. 22, 2010 Novell eDirectory Version 8.8.5 Loader SMP
DSLOG.NLM v20219.15 May. 12, 2009 DS Log for Novell eDirectory 8.8.0
EHCIDRV.CAD v1.05 Feb. 26, 2008 Novell Universal Serial Bus EHCI driver
EMBOX.NLM v20505.02 Sep. 9, 2010 eDirectory Management Tool Box Engine
EMBOXMGR.NLM v20505.02 Sep. 9, 2010 eDirectory Management Tool Box Manager
EMBOXMSG.NLM v20505.02 Sep. 9, 2010 eDirectory Management Tool Box Message API
EMSECURE.NLM v20505.02 Sep. 9, 2010 eDirectory Management Tool Box Security Service
EPWDLSM.NLM v27000508.12 Aug. 12, 2005 Novell Enhanced Password LSM 2.7.0.0 20050812
ETADVLSM.NLM v27000508.03 Aug. 3, 2005 Novell Entrust LSM 2.7.0.0 20050803
ETHERTSM.NLM v3.90 Mar. 20, 2006 Novell Ethernet Topology Specific Module
FATFS.NLM v1.24 Aug. 27, 2007 FAT Filesystem Module for NetWare
FILESYS.NLM v5.14 Apr. 16, 2008 NetWare File System NLM
GAMS.NLM v2.00.01 Sep. 2, 2008 Graded Authentication Management Service
HEADERS.NLM v2.00.63 Apr. 25, 2008 Apache 2.0.63 Headers Module
HOSTMIB.NLM v5.03.01 Dec. 1, 2006 NetWare 5.x/6.x Host Resources MIB
HPBRAND.NLM v6.11 Aug. 26, 2009 HP Data Protector HPBRAND
HPINET.NLM v6.11 Aug. 26, 2009 HP Data Protector HPINET
HPLIBDC.NLM v6.11 Aug. 26, 2009 HP Data Protector HPLIBDC
HPLIBDE.NLM v6.11 Aug. 26, 2009 HP Data Protector HPLIBDE
HPQCISS.HAM v1.14 May. 5, 2008 HP SAS/SATA Unified RAID driver
HT2SOAP.NLM v20505.02 Sep. 9, 2010 eDirectory Management Tool Box HTTP to SOAP shim
HTTPSTK.NLM v4.03 Sep. 4, 2008 Novell Small Http Interface
HWDETECT.NLM v1.19.05 Feb. 20, 2003 Novell Hardware Insertion/Removal Detection
ICEWM.NLM v3.01.02 Oct. 16, 2008 IceWM Dynamic Library for NetWare
IDEATA.HAM v4.34 May. 5, 2007 Novell IDE/ATA/ATAPI/SATA Host Adapter Module
IDECD.CDM v4.13 Apr. 4, 2007 Novell ATA/IDE CD/DVD Custom Device Module
IPMCFG.NLM v1.01.16 Oct. 22, 2005 Web Interface for IP Address Management
IPMGMT.NLM v1.03.01 May. 29, 2007 TCPIP - NetWare IP Address Management
JAVA.NLM v1.43 Oct. 16, 2008 java.nlm (based on 1.4.2_18) Build 08101613
JCLNT.NLM v2.05 Aug. 4, 2010 NetWare JClient-Native (Build 2.5.502)
JCLNTR.NLM v2.05 Aug. 4, 2010 NetWare JClient-Native Resources (Build 2.5.502)
JNCPV2.NLM v1.10 Nov. 13, 2003 Native Wrapper Java Class Libraries for NetWare
JNDPS.NLM v4.30.01 Jun. 12, 2009 Native Wrapper Java Class Libraries for NDPS
JNET.NLM v1.43 Oct. 16, 2008 Java jnet (based on 1.4.2_18)
JSMSG.NLM v3.27.03 Jun. 7, 2010 Jetstream Message Layer (Build 212 MP)
JSOCK.NLM v1.43 Oct. 16, 2008 Support For Java Sockets (loader)
JSOCK6X.NLM v1.43 Oct. 16, 2008 NetWare 6.x Support For Java Sockets (JDK 1.4.2)
JSTCP.NLM v3.27.03 Jun. 7, 2010 Jetstream TCP Transport Layer (Build 212 MP)
JVM.NLM v1.43 Oct. 16, 2008 Java Hotspot 1.4.2_18 Interpreter
JVMLIB.NLM v1.43 Oct. 16, 2008 Java jvmlib (based on 1.4.2_18)
LANGMAN.NLM v20504.01 May. 24, 2010 Novell Cross-Platform Language Manager
LANGMANI.NLM v20504.01 May. 24, 2010 Novell Cross-Platform Language Manager
LBURP.NLM v20504.02 May. 24, 2010 LDAP Bulkload Update/Replication Protocol service extension for Novell eDirectory 8.8.
LCMCIFS2.NLM v2.00.09 May. 20, 2008 Windows Native File Access Login Methods (Build 85 SP)
LCMMD5.NLM v28000806.23 Jun. 23, 2008 Novell SASL DIGEST-MD5 Proxy LCM 2.8.0.0 20080623
LDAPSDK.NLM v3.05.02 Jun. 29, 2010 LDAP SDK Library (Clib version)
LDAPX.NLM v3.05.01 Jun. 29, 2010 NetWare Extension APIs for LDAP SDK (Clib version)
LDAPXS.NLM v3.05.01 Jun. 29, 2010 (Clib version)
LFS.NLM v5.12 Sep. 21, 2005 NetWare Logical File System NLM
LIB0.NLM v5.90.15 Mar. 10, 2008 Novell Ring 0 Library for NLMs
LIBC.NLM v9.00.05 Oct. 3, 2008 Standard C Runtime Library for NLMs [optimized, 7]
LIBGCC_S.NLM v3.04.03 Apr. 29, 2005 gcc runtime and intrinsics support
LIBNSS.NLM v3.27.03 Jun. 7, 2010 Generic Library used by NSS (Build 212 MP)
LLDAPSDK.NLM v3.05.02 Jun. 29, 2010 LDAP SDK Library (LibC version)
LLDAPSSL.NLM v3.05.01 Jun. 29, 2010 NetWare SSL Library for LDAP SDK (LibC version)
LLDAPX.NLM v3.05.01 Jun. 29, 2010 NetWare Extension APIs for LDAP SDK (LibC version)
LOCNLM32.NLM v6.00.04 Nov. 29, 2005 NetWare NWLocale Runtime Library
LOGGER.NLM v20505.02 Sep. 9, 2010 eDirectory Management Tool Box Logger
LSAPI.NLM v5.02 Jan. 7, 2003 NLS LSAPI Library
LSL.MPM v5.70 Feb. 15, 2006 lsl Memory Protection Module
LSL.NLM v4.86 Feb. 2, 2006 Novell NetWare Link Support Layer
LSMAFP3.NLM v2.00.11 Jul. 15, 2008 Macintosh Native File Access Login Methods (Build 108 SP)
LSMCIFS2.NLM v2.00.07 Jul. 15, 2008 Windows Native File Access Login Methods (Build 108 SP)
LSMMD5.NLM v28000806.23 Jun. 23, 2008 Novell SASL DIGEST-MD5 LSM 2.8.0.0 20080623
LSSS.NLM v3.40 Jul. 1, 2009 Novell SecretStore LDAP Extension Manager 3.4.1.32
MAL.NSS v3.27.03 Jun. 7, 2010 NSS Media Access Layer (MAL) (Build 212 MP)
MALHLP.NLM v3.27.03 Jun. 7, 2010 NSS Configure help messages (Build 212 MP)
MANAGE.NSS v3.27.03 Jun. 7, 2010 NSS Management Functions (Build 212 MP)
MASV.NLM v2.00.01 Sep. 2, 2008 Mandatory Access Control Service
MATHLIB.NLM v4.21 Oct. 14, 1999 NetWare Math Library Auto-Load Stub
MERGECR.NLM v20505.02 Sep. 9, 2010 eDirectory Management Tool Box DSMerge eMTool
MERGETL.NLM v20505.02 Sep. 9, 2010 eDirectory Management Tool Box DSMerge eMTool
MM.NLM v3.22.07 Aug. 20, 2008 NetWare 6.5 Media Manager
MOD_JK.NLM v1.02.23 Apr. 25, 2008 Apache 2.0 plugin for Tomcat
MONDATA.NLM v6.00 Jul. 18, 2003 NetWare 5.x/6.x Monitor MIB
MONITOR.NLM v12.02.02 Apr. 4, 2006 NetWare Console Monitor
MRTGEXT.NLM v1.46.02 Jan. 3, 2007 MRTG Extention for NetWare
MSM.NLM v4.12 Aug. 22, 2007 Novell Multi-Processor Media Support Module
NBI.NLM v3.01.01 Jul. 13, 2007 NetWare Bus Interface
NCP.NLM v5.61.01 Sep. 30, 2008 NetWare Core Protocol (NCP) Engine
NCPIP.NLM v6.02.01 Sep. 30, 2008 NetWare NCP Services over IP
NCPNLM32.NLM v6.01.03 Aug. 26, 2008 NetWare NWNCP Runtime Library
NDSAUDIT.NLM v2.09 May. 22, 2003 Directory Services Audit
NDSIMON.NLM v20505.03 Sep. 9, 2010 NDS iMonitor 8.8.5 SP5
NEB.NLM v5.60 Sep. 27, 2004 Novell Event Bus
NETDB.MPM v5.70 Feb. 15, 2006 netdb Memory Protection Module
NETDB.NLM v4.11.05 Jan. 6, 2005 Network Database Access Module
NETLIB.NLM v6.50.22 Feb. 12, 2003 Novell TCPIP NETLIB Module
NETNLM32.NLM v6.01.03 Aug. 26, 2008 NetWare NWNet Runtime Library
NFAP4NRM.NLM v1.04 Dec. 8, 2003 NFAP Simple Password Management NLM
NICISDI.NLM v27610.01.01 Mar. 30, 2009 Security Domain Infrastructure
NILE.NLM v7.00.01 Aug. 20, 2007 Novell N/Ties NLM ("") Release Build with symbols
NIPPED.NLM v1.03.09 Jul. 11, 2006 NetWare 5.x, 6.x INF File Editing Library - NIPPED
NIRMAN.NLM v1.06.04 Sep. 18, 2007 TCPIP - NetWare Internetworking Remote Manager
NIT.NLM v5.90.15 Mar. 10, 2008 NetWare Interface Tools Library for NLMs
NLDAP.NLM v20505.03 Sep. 9, 2010 LDAP Agent for Novell eDirectory 8.8 SP5
NLMLIB.NLM v5.90.15 Mar. 10, 2008 Novell NLM Runtime Library
NLSADPT2.NLM v2.00 Sep. 9, 2003 NLS and Metering adapter for iManager 2.0 plugin
NLSAPI.NLM v5.02 Aug. 7, 2003 NLSAPI
NLSLRUP.NLM v4.01.07 May. 10, 2005 NLS - Usage Metering
NLSLSP.NLM v5.02 May. 25, 2005 NLS - License Service Provider
NLSMETER.NLM v3.43 May. 10, 2005 NLS - Software Usage Metering Database
NLSTRAP.NLM v5.02 Feb. 19, 2004 NetWare License Server Trap
NMAS.NLM v33200904.07 Apr. 7, 2009 Novell Modular Authentication Service 3.3.2.0 20090407
NMASGPXY.NLM v33200904.07 Apr. 7, 2009 NMAS Generic Proxy 3.3.2.0 20090407
NMASLDAP.NLM v33200904.07 Apr. 7, 2009 NMAS LDAP Extensions 3.3.2.0 20090407
NPKIAPI.NLM v3.33 Apr. 16, 2009 Public Key Infrastructure Services
NPKIJNI.NLM v3.33 Apr. 16, 2009 Public Key Infrastructure Services
NPKIT.NLM v3.33 Apr. 16, 2009 Public Key Infrastructure Services
NSPDNS.NLM v6.20.03 Sep. 8, 2003 NetWare Winsock 2.0 NSPDNS.NLM Name Service Providers
NSPNDS.NLM v6.20 Nov. 12, 2001 NetWare Winsock 2.0 NSPNDS.NLM Name Service Provider
NSPSLP.NLM v6.20.04 Dec. 6, 2007 NetWare Winsock 2.0 NSPSLP.NLM Name Service Provider
NSS.NLM v3.27.03 Jun. 7, 2010 NSS (Novell Storage Services) (Build 212 MP)
NSSIDK.NSS v3.27.03 Jun. 7, 2010 NSS Pool Configuration Manager (Build 212 MP)
NSSWIN.NLM v3.27.03 Jun. 7, 2010 NSS ASCI Window API Library (Build 212 MP)
NTLS.NLM v20510.01 Mar. 11, 2009 NTLS 2.0.5.0 based on OpenSSL 0.9.7m
NVGES.NLM v4.00 May. 30, 2007 NetVision GES Broker for NetWare
NVLOGREG.NLM v3.50 May. 31, 2007 NetVision Login and Registration API
NVSA.NLM v4.06 May. 15, 2008 NetVision ServerAlert NLM
NWAIF103.NLM v7.94 Nov. 30, 2001 nwaif103.nlm v7.94, Build 251 ()
NWBSRVCM.NLM v7.90 Mar. 20, 2001 NWBSRVCM.NLM v7.90.000, Build 230
NWENC103.NLM v7.90 Feb. 24, 2001 NWENC103.NLM v7.90.000 (Text Encoding Conversion Library)
NWI.NLM v2.51 Feb. 11, 2008 NetWare Install (NWI) Module
NWIDK.NLM v3.01.01 Sep. 19, 2003 CDWare Volume Module
NWKCFG.NLM v2.16 Jun. 24, 2005 NetWare Kernel Config NLM
NWMKDE.NLM v7.94 Dec. 11, 2001 NWMKDE.NLM v7.94.251.000
NWPA.NLM v3.21.02 Oct. 29, 2008 NetWare 6.5 NetWare Peripheral Architecture NLM
NWPALOAD.NLM v3.00 Jul. 10, 2000 NetWare 5 NWPA Load Utility
NWSA.NSS v3.27.03 Jun. 7, 2010 NSS NetWare Semantic Agent (NWSA) (Build 212 MP)
NWSNUT.NLM v7.00.01 Jul. 11, 2008 NetWare NLM Utility User Interface
NWTERMIO.NLM v1.00 Sep. 11, 2006 NetWare Terminal Emulation
NWTRAP.NLM v6.00.05 Jun. 6, 2005 NetWare 5.x/6.x Trap Monitor
NWUCMGR.NLM v1.05 Mar. 14, 2001 NWUCMGR.NLM v1.5 Build 230
NWUTIL.NLM v3.00.02 Aug. 20, 2007 Novell Utility Library NLM (_NW65[SP7]{""})
OWCIMOMD.NLM v3.02 Nov. 27, 2007 OpenWBEM CIMOM Daemon with Novell providers
PARTAPI.NLM v2.00 Apr. 17, 2002 Partition APIs for NetWare 6.1
PKI.NLM v3.33 Apr. 16, 2009 Novell Certificate Server
PKIAPI.NLM v2.23.10 Nov. 20, 2004 Public Key Infrastructure Services
PMLODR.NLM v1.25 Nov. 4, 2004 ENG TEST - PMLodr for NW65
PMPORTAL.NLM v2.16 Nov. 21, 2003 NetWare License Information Portal
POLIMGR.NLM v6.27 Nov. 3, 2005 NetWare License Policy Manager
PORTAL.NLM v4.03 Sep. 22, 2008 Novell Remote Manager NLM
PS2.NLM v1.01 Oct. 16, 2008 Java - PS/2 Mouse Port Driver Build 081016
PSA.NSS v3.27.03 Jun. 7, 2010 PSA Posix Semantic Agent (PSA) (Build 212 MP)
PSVCS.NLM v251.00 Nov. 30, 2001 Portability Services
PVER500.NLM v3.00 Apr. 27, 2010 ENG TEST - NetWare 6.XX Version Library
PWDLCM.NLM v28000806.23 Jun. 23, 2008 Novell Simple Password Proxy LCM 2.8.0.0 20080623
PWDLSM.NLM v28000806.23 Jun. 23, 2008 Novell Simple Password LSM 2.8.0.0 20080623
QUEUE.NLM v5.60 May. 24, 2001 NetWare Queue Services NLM
REPAIRCR.NLM v20505.02 Sep. 9, 2010 eDirectory Management Tool Box DSRepair eMTool
REPAIRTL.NLM v20505.02 Sep. 9, 2010 eDirectory Management Tool Box DSRepair eMTool
REQUESTR.NLM v5.90.15 Mar. 10, 2008 Novell NCP Requestor for NLMs
ROLLCALL.NLM v5.00 Jul. 27, 1998 RollCall NLM (101, API 1.0)
ROTLOGS.NLM v2.00.63 Apr. 25, 2008 Apache 2.0.63 Log Rotation Utility for NetWare
RSS.NLM v20505.02 Sep. 9, 2010 eDirectory Management Tool Box Remote Subscription Service
SAL.NLM v20504.01 May. 24, 2010 Novell System Abstraction Layer Version 8.8.0
SASDFM.NLM v27610.01.01 Mar. 30, 2009 SAS Data Flow Manager
SASL.NLM v33200904.07 Apr. 7, 2009 Simple Authentication and Security Layer 3.3.2.0 20090407
SCHEMACR.NLM v20505.02 Sep. 9, 2010 eDirectory Management Tool Box Schema eMTool
SCHEMATL.NLM v20505.02 Sep. 9, 2010 eDirectory Management Tool Box Schema eMTool
SCRCB.NLM v1.00 Oct. 3, 2005 Scripting - LibC-CLib Context Broker
SERVICTL.NLM v20505.02 Sep. 9, 2010 eDirectory Management Tool Box DSService eMTool
SERVINST.NLM v5.00.13 Nov. 21, 2005 NetWare 5.x/6.x Instrumentation
SETBG.NLM v1.01 Oct. 16, 2008 Java - X Window Set Background Frontend Build 081016
SETMD4.NLM v2.00.01 Jun. 7, 2010 Windows Native File Access CIFS Library (Build 212 SP)
SGUID.NLM v6.01 Sep. 27, 2002 NetWare GUID Services
SLP.MPM v5.70 Feb. 15, 2006 slp Memory Protection Module
SLP.NLM v2.13 Nov. 15, 2005 SERVICE LOCATION PROTOCOL (RFC2165/RFC2608)
SLPDA.NLM v2.13 Nov. 15, 2005 SERVICE LOCATION NDS DIRECTORY AGENT (RFC2165/RFC2608)
SLPTCP.NLM v2.13 Nov. 15, 2005 SERVICE LOCATION TCP/UDP INTERFACE (RFC2165/RFC2608)
SMDR.NLM v6.57.06 Feb. 15, 2010 SMS - Storage Data Requestor
SMSUT.NLM v1.01.03 Aug. 14, 2007 SMS - Utility Library for NetWare 6.X
SNMP.MPM v5.70 Feb. 15, 2006 snmp Memory Protection Module
SNMP.NLM v4.18 Jul. 25, 2006 Netware 4.x/5.x/6.x SNMP Service
SPMDCLNT.NLM v33200904.07 Apr. 7, 2009 Novell SPM Client for DClient 3.3.2.0 20090407
SSLDP.NLM v3.40 Jul. 1, 2009 Novell SecretStore LDAP Transport Plugin 3.4.1.32
SSNCP.NLM v3.40 Jul. 1, 2009 Novell SecretStore NCP Transport Plugin 3.4.1.32
SSS.NLM v3.40 Jul. 1, 2009 Novell SecretStore 3.4.1.32
STREAMS.MPM v5.70 Feb. 15, 2006 streams Memory Protection Module
STREAMS.NLM v6.00.06 May. 4, 2005 NetWare STREAMS PTF
SYSCALLS.NLM v5.61 Aug. 2, 2007 NetWare Operating System Call and Marshalling Library
SYSLOG.NLM v6.05.03 Oct. 22, 2007 NetWare Logfile Daemon
TCP.NLM v6.82.06 Dec. 23, 2009 Novell TCP/IP Stack - Transport module (NULL encryption)
TCPIP.MPM v5.70 Feb. 15, 2006 tcpip Memory Protection Module
TCPIP.NLM v6.82.02 Sep. 30, 2009 Novell TCP/IP Stack - Network module (NULL encryption)
TCPSTATS.NLM v6.50.10 Jun. 20, 2003 Web Interface for Protocol Monitoring
THREADS.NLM v5.90.15 Mar. 10, 2008 Novell Threads Package for NLMs
TIMESYNC.NLM v6.61.01 Oct. 14, 2005 NetWare Time Synchronization Services
TLI.MPM v5.70 Feb. 15, 2006 tli Memory Protection Module
TLI.NLM v4.30.02 Dec. 19, 2000 NetWare Transport Level Interface Library
TSAFS.NLM v6.52.09 Oct. 16, 2008 SMS - File System Agent for NetWare 6.X
TSANDS.NLM v20504.03 May. 25, 2010 TSA for Novell eDirectory 7.x, 8.x
TUI.NLM v1.05.03 May. 28, 1998 Textual User Interface MOAB_B40.528
UHCIDRV.CAD v1.07 Feb. 26, 2008 Novell Universal Serial Bus UHCI driver
UIMON.NLM v1.03 Oct. 16, 2008 UIMON, User interface monitor Build 081016
UNICODE.NLM v7.00 Oct. 26, 2004 NetWare Unicode Runtime Library (UniLib-based) [optimized]
USCLSM.NLM v27000507.14 Jul. 14, 2005 Novell Universal SmartCard LSM 2.7.0.0 20050714
USERLIB.NLM v5.60 Sep. 29, 2008 NetWare Operating System Function Library
UTILLDAP.NLM v2.00.63 Apr. 25, 2008 Apache 2.0.63 LDAP Authentication Module
VDISK.NLM v1.00 Nov. 30, 2004 NetWare Virtual Disk
VERIFY.NLM v1.43 Oct. 16, 2008 Java verify (based on 1.4.2_18)
VLRPC.NLM v3.27.03 Jun. 7, 2010 DFS Volume Location Database (VLDB) RPC interface (Build 212 MP)
VMRPC.NLM v3.27.03 Jun. 7, 2010 DFS Volume Manager RPC interface (Build 212 MP)
VOLMN.NSS v3.27.03 Jun. 7, 2010 NSS Distributed Volume Manager (Build 212 MP)
VOLSMS.NLM v3.27.03 Jun. 7, 2010 NSS Distributed Volume Manager (Build 212 MP)
WS2_32.NLM v6.24.01 Feb. 14, 2008 NetWare Winsock 2.0 NLM
WSPDSI.NLM v6.21.01 Oct. 25, 2005 NetWare Winsock Service 1.0 NLM for Data Stream Interface
WSPIP.NLM v6.24 Dec. 4, 2007 NetWare Winsock Service 1.0 NLM for TCP and UDP
WSPSSL.NLM v6.26 Dec. 4, 2007 NetWare Winsock Service 1.0 NLM for SSL
X509ALSM.NLM v27000508.03 Aug. 3, 2005 Novell Advanced X.509 LSM 2.7.0.0 20050803
X509LSM.NLM v27000508.03 Aug. 3, 2005 Novell Simple X.509 LSM 2.7.0.0 20050803
XENGEXP.NLM v27610.01.01 Mar. 30, 2009 NICI Import Restricted XENG from Novell, Inc.
XENGNUL.NLM v27610.01.01 Mar. 30, 2009 NICI NULL XENG from Novell, Inc.
XENGUSC.NLM v27610.01.01 Mar. 30, 2009 NICI U.S./Worldwide XENG from Novell, Inc.
XI18N.NLM v10310.53 Aug. 2, 2005 Novell Cross-Platform Internationalization Package
XIDEV.NLM v1.02 Oct. 16, 2008 Java - X Window Input Driver Build 081016
XIM.XLM v27510.02.01 Aug. 25, 2008 Novell NICI Signed Loader
XINIT.NLM v6.01 Oct. 16, 2008 Java - X Window System initializer Build 081016
XIS11.NLM v1.00.03 Nov. 18, 2009 XML Integration Service
XLIB.NLM v11.07 Oct. 16, 2008 Java - XFree86 4.X X11R6 Library (LIBC) Build 081016
XMGR.NLM v27610.01.01 Mar. 30, 2009 NICI XMGR from Novell, Inc.
XNGAUSC.NLM v27610.01.01 Mar. 30, 2009 NICI U.S./Worldwide XMGR Assistant XENG from Novell, Inc.
XSELPROXY.NL v1.01 Oct. 16, 2008 Java - X Selection proxy utility Build 081016
XSETBG.NLM v6.01 Oct. 16, 2008 Java - X11 Image Loading utility Build 081016
XSUP.NLM v27610.01.01 Mar. 30, 2009 NICI XSUP from Novell, Inc.
XVESA.NLM v5.01.02 Oct. 16, 2008 Java - XFree86 4.2.0 Kdrive VESA XServer Build 081016
ZIP.NLM v1.43 Oct. 16, 2008 Java zip (based on 1.4.2_18)
ZLSS.NSS v3.27.03 Jun. 7, 2010 NSS Journaled Storage System (ZLSS) (Build 212 MP)
End of Modules List 282 Modules Loaded.
Top of LAN Driver Configuration Listing
Signature.....: HardwareDriverMLID
CFG Version...: 1.15
Node Address..: 00215A5D04F4
Board Number..: 1
Board Instance: 1
Media Type....: ETHERNET_II
MLID Version..: 4.64
Slot..........: 10039
I/O...........: None
Memory........: F8000000h -> F800FFFFh
IRQ...........: 5
DMA...........: None
Logical Name..: BX2_1_EII_EII
End of LAN Driver Configuration Listing
Top of Boot Drive Information
SERVER.EXE loaded from...........: C:\NWSERVER\
SERVER.EXE version...............: 1357067 bytes 03-09-2011 12:06pm
Total Space on Drive.............: 496 MB
Available Space..................: 424 MB
End of Boot Drive Information
Top of Storage Device Configuration Information
Storage Device Summary:
0x0000 [V100-A100] USB UHCI Controller
0x0001 [V100-A101] USB UHCI Controller
0x0002 [V100-A102] USB UHCI Controller
0x0003 [V100-A103] USB UHCI Controller
0x0004 [V100-A104] USB EHCI Controller
0x0005 [V100-A105] USB UHCI Controller
0x0006 [V025-A0] Novell IDE/ATA/ATAPI/SATA Host Adapter Module
0x0010 [V025-A0-D0:0] TEAC DV-W28E-RW f/w:G.B2
0x0007 [V505-A1] HP SAS/SATA Unified RAID Driver
0x000A [V505-A1-D0:0] HP Smart Array P400 Slot 0 LUN 0
0x0011 Unidentified Media
0x0008 [V505-A2] HP SAS/SATA Unified RAID Driver
0x0009 [V505-A2-D0:0] HP Smart Array P400 Slot 4 LUN 0
0x000B DOS Partitioned Media
0x000F [V505-A2-D0:0-PEF3A1] Free Partition Space
0x000C [V505-A2-D0:0-P0] Big DOS; OS/2; Win95 Partition
0x000D [V505-A2-D0:0-P1F2] NSS Partition
0x000E [V505-A2-D0:0-P2902] NSS Partition
Storage Device Details:
[V100-A100] USB UHCI Controller
Media Manager object ID..: 0x0000
Media Manager Object Type: Adapter
Driver name..............: UHCIDRV.CAD
Assigned driver ID.......: 256
Adapter number...........: 256
Primary port address.....: 1000
Primary port length......: 18
Secondary port address...: Not used
Secondary port length....: Not used
Interrupt 0..............: 18
Interrupt 1..............: Not used
Slot.....................: 10019
DMA0.....................: Not used
DMA1.....................: Not used
Memory 0 address.........: Not used
Memory 0 length..........: Not used
Memory 1 address.........: Not used
Memory 1 length..........: Not used
[V100-A101] USB UHCI Controller
Media Manager object ID..: 0x0001
Media Manager Object Type: Adapter
Driver name..............: UHCIDRV.CAD
Assigned driver ID.......: 256
Adapter number...........: 257
Primary port address.....: 1020
Primary port length......: 18
Secondary port address...: Not used
Secondary port length....: Not used
Interrupt 0..............: 28
Interrupt 1..............: Not used
Slot.....................: 10020
DMA0.....................: Not used
DMA1.....................: Not used
Memory 0 address.........: Not used
Memory 0 length..........: Not used
Memory 1 address.........: Not used
Memory 1 length..........: Not used
[V100-A102] USB UHCI Controller
Media Manager object ID..: 0x0002
Media Manager Object Type: Adapter
Driver name..............: UHCIDRV.CAD
Assigned driver ID.......: 256
Adapter number...........: 258
Primary port address.....: 1040
Primary port length......: 18
Secondary port address...: Not used
Secondary port length....: Not used
Interrupt 0..............: 38
Interrupt 1..............: Not used
Slot.....................: 10021
DMA0.....................: Not used
DMA1.....................: Not used
Memory 0 address.........: Not used
Memory 0 length..........: Not used
Memory 1 address.........: Not used
Memory 1 length..........: Not used
[V100-A103] USB UHCI Controller
Media Manager object ID..: 0x0003
Media Manager Object Type: Adapter
Driver name..............: UHCIDRV.CAD
Assigned driver ID.......: 256
Adapter number...........: 259
Primary port address.....: 1060
Primary port length......: 18
Secondary port address...: Not used
Secondary port length....: Not used
Interrupt 0..............: 48
Interrupt 1..............: Not used
Slot.....................: 10022
DMA0.....................: Not used
DMA1.....................: Not used
Memory 0 address.........: Not used
Memory 0 length..........: Not used
Memory 1 address.........: Not used
Memory 1 length..........: Not used
[V100-A104] USB EHCI Controller
Media Manager object ID..: 0x0004
Media Manager Object Type: Adapter
Driver name..............: EHCIDRV.CAD
Assigned driver ID.......: 256
Adapter number...........: 260
Primary port address.....: Not used
Primary port length......: Not used
Secondary port address...: Not used
Secondary port length....: Not used
Interrupt 0..............: 18
Interrupt 1..............: Not used
Slot.....................: 10023
DMA0.....................: Not used
DMA1.....................: Not used
Memory 0 address.........: 0000
Memory 0 length..........: 006C
Memory 1 address.........: Not used
Memory 1 length..........: Not used
[V100-A105] USB UHCI Controller
Media Manager object ID..: 0x0005
Media Manager Object Type: Adapter
Driver name..............: UHCIDRV.CAD
Assigned driver ID.......: 256
Adapter number...........: 261
Primary port address.....: 3800
Primary port length......: 18
Secondary port address...: Not used
Secondary port length....: Not used
Interrupt 0..............: 60
Interrupt 1..............: Not used
Slot.....................: 10030
DMA0.....................: Not used
DMA1.....................: Not used
Memory 0 address.........: Not used
Memory 0 length..........: Not used
Memory 1 address.........: Not used
Memory 1 length..........: Not used
[V025-A0] Novell IDE/ATA/ATAPI/SATA Host Adapter Module
Media Manager object ID..: 0x0006
Media Manager Object Type: Adapter
Driver name..............: IDEATA.HAM
Assigned driver ID.......: 37
Adapter number...........: 0
Primary port address.....: 1F0
Primary port length......: 8
Secondary port address...: Not used
Secondary port length....: Not used
Interrupt 0..............: E
Interrupt 1..............: Not used
Slot.....................: 0
DMA0.....................: Not used
DMA1.....................: Not used
Memory 0 address.........: Not used
Memory 0 length..........: Not used
Memory 1 address.........: Not used
Memory 1 length..........: Not used
[V025-A0-D0:0] TEAC DV-W28E-RW f/w:G.B2
Media manager object ID.....: 0x0010
Media manager Object Type...: Device
Device type.................: CD-ROM
Capacity....................: Unavailable
Unit Size, in bytes.........: 512
Sectors.....................: 0
Heads.......................: 0
Cylinders...................: 0
Block size, in bytes........: 134215680
Activated...................: No
Registered..................: Yes
Functional..................: Yes
Writable....................: Yes
Write protected.............: No
Reserved....................: No
Removable...................: Yes
Read Handicap...............: No
Offline.....................: No
Controller Number...........: 0
Device Number...............: 0
Adapter Number..............: 0
System Type.................: 0x90000
Read after write verify.....: Not supported
Removable drive mount status: Dismounted
Removable drive lock status.: Not locked
[V505-A1] HP SAS/SATA Unified RAID Driver
Media Manager object ID..: 0x0007
Media Manager Object Type: Adapter
Driver name..............: HPQCISS.HAM
Assigned driver ID.......: 1285
Adapter number...........: 1
Primary port address.....: Not used
Primary port length......: Not used
Secondary port address...: Not used
Secondary port length....: Not used
Interrupt 0..............: 5
Interrupt 1..............: Not used
Slot.....................: 10032
DMA0.....................: Not used
DMA1.....................: Not used
Memory 0 address.........: 0000
Memory 0 length..........: 0100
Memory 1 address.........: Not used
Memory 1 length..........: Not used
[V505-A1-D0:0] HP Smart Array P400 Slot 0 LUN 0
Media manager object ID.....: 0x000A
Media manager Object Type...: Device
Device type.................: Magnetic disk
Capacity....................: 979456 MB
Unit Size, in bytes.........: 512
Sectors.....................: 32
Heads.......................: 255
Cylinders...................: 49321
Block size, in bytes........: 131072
Activated...................: Yes
Registered..................: Yes
Functional..................: Yes
Writable....................: Yes
Write protected.............: No
Reserved....................: No
Removable...................: No
Read Handicap...............: No
Offline.....................: No
Controller Number...........: 0
Device Number...............: 0
Adapter Number..............: 1
System Type.................: 0x90000
Read after write verify.....: Not supported
Unidentified Media
Media Manager object ID..: 0x0011
Media Manager Object Type: Media
Media type...............: Unknown
[V505-A2] HP SAS/SATA Unified RAID Driver
Media Manager object ID..: 0x0008
Media Manager Object Type: Adapter
Driver name..............: HPQCISS.HAM
Assigned driver ID.......: 1285
Adapter number...........: 2
Primary port address.....: Not used
Primary port length......: Not used
Secondary port address...: Not used
Secondary port length....: Not used
Interrupt 0..............: 7
Interrupt 1..............: Not used
Slot.....................: 4
DMA0.....................: Not used
DMA1.....................: Not used
Memory 0 address.........: 0000
Memory 0 length..........: 0100
Memory 1 address.........: Not used
Memory 1 length..........: Not used
[V505-A2-D0:0] HP Smart Array P400 Slot 4 LUN 0
Media manager object ID.....: 0x0009
Media manager Object Type...: Device
Device type.................: Magnetic disk
Capacity....................: 979456 MB
Unit Size, in bytes.........: 512
Sectors.....................: 32
Heads.......................: 255
Cylinders...................: 49321
Block size, in bytes........: 131072
Activated...................: Yes
Registered..................: Yes
Functional..................: Yes
Writable....................: Yes
Write protected.............: No
Reserved....................: No
Removable...................: No
Read Handicap...............: No
Offline.....................: No
Controller Number...........: 0
Device Number...............: 0
Adapter Number..............: 2
System Type.................: 0x90000
Read after write verify.....: Not supported
DOS Partitioned Media
Media Manager object ID..: 0x000B
Media Manager Object Type: Media
Media type...............: IBM partition
[V505-A2-D0:0-PEF3A1] Free Partition Space
Media Manager object ID......: 0x000F
Media Manager Object Type....: Partition
Activated....................: Yes
Registered...................: Yes
Functional...................: Yes
Reserved.....................: No
Logical partition............: No
Beginning sector of partition: 2006780000
Size, in sectors.............: 640
[V505-A2-D0:0-P0] Big DOS; OS/2; Win95 Partition
Media Manager object ID......: 0x000C
Media Manager Object Type....: Partition
Activated....................: Yes
Registered...................: Yes
Functional...................: Yes
Reserved.....................: Yes
Logical partition............: No
Beginning sector of partition: 32
Size, in sectors.............: 1019968
[V505-A2-D0:0-P1F2] NSS Partition
Media Manager object ID......: 0x000D
Media Manager Object Type....: Partition
Activated....................: Yes
Registered...................: Yes
Functional...................: Yes
Reserved.....................: Yes
Logical partition............: Yes
Beginning sector of partition: 1020000
Size, in sectors.............: 20480000
[V505-A2-D0:0-P2902] NSS Partition
Media Manager object ID......: 0x000E
Media Manager Object Type....: Partition
Activated....................: Yes
Registered...................: Yes
Functional...................: Yes
Reserved.....................: Yes
Logical partition............: Yes
Beginning sector of partition: 21500000
Size, in sectors.............: 1985280000
End of Storage Device Configuration Information
* Volume Statistics for SYS *
File System................: NSSIDK (Novell Storage Services)
Volume Size................: 9934 MB
Block Size.................: 4 KB
Total Blocks...............: 2543202
Free Blocks................: 478208
Purgable Blocks............: 515511
Not Yet Purgable Blocks....: 0
Total Directory Entries....: 2147483647
Available Directory Entries: 2147327396
Sectors per Block..........: 8
Free Disk Space............: 1868 MB
Purgable Disk Space........: 2013 MB
Suballocation..............: OFF
Compression................: OFF
Migration..................: OFF
* Volume Statistics for _ADMIN *
File System................: Unknown
Volume Size................: 4 MB
Block Size.................: 4 KB
Total Blocks...............: 1024
Free Blocks................: 1024
Purgable Blocks............: 0
Not Yet Purgable Blocks....: 0
Total Directory Entries....: 2147483647
Available Directory Entries: 2147483647
Sectors per Block..........: 8
Free Disk Space............: 4 MB
Purgable Disk Space........: 0 MB
Suballocation..............: OFF
Compression................: OFF
Migration..................: OFF
* Volume Statistics for DATA *
File System................: NSSIDK (Novell Storage Services)
Volume Size................: 966499 MB
Block Size.................: 4 KB
Total Blocks...............: 247423927
Free Blocks................: 27092763
Purgable Blocks............: 3932724
Not Yet Purgable Blocks....: 0
Total Directory Entries....: 2147483647
Available Directory Entries: 2145105235
Sectors per Block..........: 8
Free Disk Space............: 105831 MB
Purgable Disk Space........: 15362 MB
Suballocation..............: OFF
Compression................: OFF
Migration..................: OFF
Volume Name Name Spaces Loaded
SYS DOS
SYS MACINTOSH
SYS NFS
SYS LONG_NAMES
_ADMIN DOS
_ADMIN MACINTOSH
_ADMIN NFS
_ADMIN LONG_NAMES
DATA DOS
DATA MACINTOSH
DATA NFS
DATA LONG_NAMES
Top of NDS/eDirectory Configuration Listing
NDS Tree Name............: XXXX_I
NDS Server Name..........: CN=XXXSVR1NW.OU=OES 2 Netware Servers.OU=OES SERVERS.OU=SERVERS.O=XYZ.T=XYZ_I
NDS Version..............: v20505.07
sys:_netware attributes..: Hidden System SubDir ImmediatePurge
*.NDS files..........: 22529 (56.9 MB)
*.DSD files..........: 2 (0 bytes)
*.DSB files..........: 0 (0 bytes)
NDS.* files..........: 4 (187.4 MB)
NDS*.LOG files.......: 0 (0 bytes)
NDO.* files..........: 3 (187.9 MB)
NDO*.LOG files.......: 0 (0 bytes)
*.41X files..........: 0 (0 bytes)
*.OLD files..........: 0 (0 bytes)
*.DOD files..........: 0 (0 bytes)
*.DOB files..........: 0 (0 bytes)
*.__D files..........: 0 (0 bytes)
*.__B files..........: 0 (0 bytes)
*.DTD files..........: 0 (0 bytes)
*.DTB files..........: 0 (0 bytes)
*.TAO files..........: 0 (0 bytes)
*.WBQ files..........: 0 (0 bytes)
Partition Name...........: T=XYZ_I
Partition Type...........: Master
Partition State..........: On
Partition Name...........: OU=PUBLIC.O=XYZ.T=XYZ_I
Partition Type...........: Master
Partition State..........: On
Partition Name...........: OU=STAFF.O=XYZ.T=XYZ_I
Partition Type...........: Master
Partition State..........: On
End of NDS/eDirectory Configuration Listing
Top of Installed Product List
Product ID...........: AP2WEB
Product Version......: 2.0.63
Product Description..: Apache2 Web Server and Tomcat 4 Servlet Container
Product ID...........: APACHE2
Product Version......: 2.0.63
Product Description..: Apache2 Admin Server
Product ID...........: BNS
Product Version......: 1.1.0
Product Description..: Beans for Novell Services
Product ID...........: C1RPTING
Product Version......: 1.3.6
Product Description..: Reporting Snapin
Product ID...........: CANWAG
Product Version......: 11.1.3
Product Description..: BrightStor ARCserve Backup NetWare Agent
Product ID...........: CONSOLE1
Product Version......: 1.3.6
Product Description..: ConsoleOne 1.3.6h
Product ID...........: EDIR
Product Version......: 88.5.0
Product Description..: eDirectory (tm) 88 SP5
Product ID...........: EDIR_IR
Product Version......: 88.5.5
Product Description..: Novell eDirectory Patch 8.8.5.5
Product ID...........: EMBOX
Product Version......: 88.5.0
Product Description..: eDirectory Management Utilities Toolbox
Product ID...........: LDAP
Product Version......: 88.0.0
Product Description..: LDAP Services
Product ID...........: NDS8
Product Version......: 88.5.0
Product Description..: eDirectory (tm) 88 SP5
Product ID...........: NICI
Product Version......: 2.7.6
Product Description..: Novell International Cryptographic Infrastructure (NICI)
Product ID...........: NICIU0
Product Version......: 2.7.6
Product Description..: NICI U.S./Canada (128bit) Crypto XENG
Product ID...........: NLS
Product Version......: 5.0.2
Product Description..: Novell Licensing Services
Product ID...........: NMAS
Product Version......: 3.3.2
Product Description..: Novell Modular Authentication Service
Product ID...........: NSN
Product Version......: 2.0.0
Product Description..: NSN
Product ID...........: NSS
Product Version......: 3.27.03
Product Description..: NetWare 6.5 post-SP8 NSS 8C
Product ID...........: NTLS
Product Version......: 2.0.5
Product Description..: Novell TLS Library
Product ID...........: OES
Product Version......: 2.0.0
Product Description..: Open Enterprise Server
Product ID...........: OPENWBEM
Product Version......: 3.1.0
Product Description..: OpenWBEM
Product ID...........: PERVASIV
Product Version......: 7.9.4
Product Description..: Pervasive SQL 2000i
Product ID...........: PHP
Product Version......: 5.0.5
Product Description..: PHP
Product ID...........: PKIS
Product Version......: 3.3.3
Product Description..: Novell Certificate Server v3.33
Product ID...........: PORTAL
Product Version......: 4.3.0
Product Description..: NetWare Remote Manager (NRM)
Product ID...........: Pattern
Product Version......: 1.0.0
Product Description..: Management Server
Product ID...........: Perl
Product Version......: 5.8.4
Product Description..: Perl
Product ID...........: SAS
Product Version......: 1.7.4
Product Description..: SSL Security Authentication Services
Product ID...........: SMS
Product Version......: 1.1.6
Product Description..: Storage Management Services (SMS)
Product ID...........: SPACK
Product Version......: 6.5.8
Product Description..: v8.0 Support Pack for NetWare 6.5
Product ID...........: SS
Product Version......: 3.4.0
Product Description..: Novell SecretStore
Product ID...........: TOMCAT5
Product Version......: 5.0.30
Product Description..: Tomcat 5 Servlet Container
Product ID...........: Tomcat
Product Version......: 4.1.37
Product Description..: Tomcat 4 Admin Instance
Product ID...........: WANMAN
Product Version......: 1.0.3
Product Description..: WAN Traffic Manager Services
Product ID...........: eGuide
Product Version......: 2.1.2
Product Description..: eDirectory Address Book Web Application
Product ID...........: iManager
Product Version......: 2.7.2
Product Description..: Novell iManager 2.7.2
Product ID...........: iMonitor
Product Version......: 2.4.0
Product Description..: NDS iMonitor Services
End of Installed Product List
Top of Running Java Processes 3 Processes Running
Class Name...........: org.apache.catalina.startup.Bootstrap
Class ID.............: 418
Class State..........: Running
Class Name...........: org.apache.catalina.startup.Bootstrap
Class ID.............: 470
Class State..........: Running
Class Name...........: org.apache.catalina.startup.Bootstrap
Class ID.............: 420
Class State..........: Running
End of Running Java Processes
Top of Server Memory Statistics
Allocated Memory.................: 1316.4 MB
Cache Buffer Memory..............: 886.9 MB
Cache Moveable Memory............: 0.0 MB
Cache Non-moveable Memory........: 0.0 MB
Code Memory......................: 42.6 MB
Data Memory......................: 20.7 MB
Total Work Memory................: 2266.6 MB
Other Cache Pages Memory.........: 1864.8 MB
System Memory Under 4GB..........: 3324.9 MB
Total Known Memory...............: 4864.0 MB
End of Server Memory Statistics
Top of file. [SYS:ETC\CRONTAB]
# Run perl script to rotate logs each midnight.
0 0 * * * perl sys:/apache2/rotate.pl sys:/apache2/rotate.ini --noscreen
End of file. [SYS:ETC\CRONTAB]
Top of file. [SYS:ETC\GATEWAYS]
# SYS:ETC\GATEWAYS
# List of unusual routes which must be added to the routing
# database statically.
# Normally you will not need this file, as most routing information
# should be available through the routing protocols.
# Examples. These entries will not be useful to you.
#net milnet gateway sj-in5 metric 3 active # to milnet through in5.
#net arpa gateway sj-in1 passive # to arpanet. in1 is passive.
#host 130.57.6.40 gateway 192.67.172.55 # route with numbers.
Net 0 Gateway xx.xxx.xxx.x Metric 1 Passive
End of file. [SYS:ETC\GATEWAYS]
Top of file. [SYS:ETC\HOSTS]
# SYS:ETC\HOSTS
# Mappings of host names and host aliases to IP address.
127.0.0.1 loopback lb localhost # normal loopback address
# examples from Novell network
130.57.4.2 ta tahiti ta.novell.com loghost
130.57.6.40 osd-frog frog
130.57.6.144 sj-in5 in5
192.67.172.71 sj-in1 in1
# interesting addresses on the Internet
xxx.xx.xx.xx sri-nic.arpa nic.ddn.mil nic
xx.x.x.xx wsmr-simtel20.army.mil simtel20
xx.xxx.xxx.xxx xyz
xx.xxx.xxx.xxx xyz_CLUSTER_ZEN_POOL_SERVER
xx.xxx.xxx.xxx zen
xx.xxx.xxx.xxx zen
xx.xxx.xxx.xxx xyz
xx.xxx.xxx.xxx xyz_xyz.xyz.net xyz_xyz
End of file. [SYS:ETC\HOSTS]
Top of file. [SYS:ETC\HOSTNAME]
xx.xxx.xxx.xxx xyz.xyz.net
End of file. [SYS:ETC\HOSTNAME]
Top of file. [SYS:ETC\NETINFO.CFG]
#!VERSION=2.3
#! --- WARNING -- WARNING -- WARNING -- WARNING -- WARNING -- WARNING ----
#! This file was created by the Internetworking Configuration Console.
#! It is intended to be modified ONLY by the configurator (INETCFG.NLM).
#! Tampering with this file may cause severe malfunctioning of the system.
#! The configurator will check for tampering and abort if it is detected.
#!SERVERTYPE=NORMAL
#!UIMODE=NORMAL
#!BEGINGENLOAD
LOAD SNMP MonitorCommunity=XYZ ControlCommunity=XYZ TrapCommunity=XYZ
LOAD BCALLSRV
#!END
#!BEGINTSMLOAD
#!END
#!BEGINBOARD DRVR=BX2 NAME=BX2_1_EII STATUS=ENABLED NUMPORTS=1 DRVRTYPE=LAN VARIABLEPORTS=NO PORTPARAM=CHANNEL SLOT=10039
#Transferred from AUTOEXEC.NCF
#!BEGINPORT NAME=BX2_1_EII NUMBER=1 STATUS=ENABLED FRAMES=YES NUMLINKS=1 MEDIA=EtherTsm WANFRAME=UNCONFIGURED
#Transferred from AUTOEXEC.NCF
#!REFCOUNT=1
LOAD BX2 NAME=BX2_1_EII_EII FRAME=ETHERNET_II SLOT=10039
#!END
#!END
#!BEGINPROTO PROTO=TCPIP STATUS=ENABLED
LOAD TCPIP
#Transferred from AUTOEXEC.NCF
#!BEGINBIND STATUS=ENABLED
BIND IP BX2_1_EII_EII ARP=Yes Mask=255.255.255.0 Address=xx.xxx.xxx.xxx
#xx.xxx.xxx.xxx
#!END
#!END
End of file. [SYS:ETC\NETINFO.CFG]
Top of file. [SYS:ETC\RESOLV.CFG]
domain xxx.net
nameserver xx.xxx.xxx.xx
nameserver xx.xxx.xxx.xx
End of file. [SYS:ETC\RESOLV.CFG]
Top of file. [SYS:ETC\SLP.CFG]
; This is a sample of the slp configuration file.
; Two types of entries can be made: 1) DA entries, 2) SA Register Filters.
; The DA entry allows static configuration of a known DA. This would be used
; when the DA was out of multicast range and DHCP was not being used to
; configure the DA.
; The static DA configuration format is as follows 'DA <addr type>, <addr>'.
; The first word must be "DA". The addr type is the address type. Currently, only
; IPV4 has been defined. IPV6 will be defined in the future. The addr is
; the address specified.
; The following is an example of a static DA.
; DA IPV4, 130.1.1.1
; The SA Register Filter would be used when the administrator wanted all services
; of a specific service type being mapped to a single scope. For example,
; the administrator wanted all "lpr" printers being registered to scope "printer".
; The format is as follows: 'REGISTER TYPE "<type name>" to SCOPE "<scope name>"'.
; The parser will look for REGISTER, TYPE, and SCOPE as keywords followed by quote on
; a single line. Example:
; REGISTER TYPE "lpr" to SCOPE "eng"
; The last line must contain a line feed and char return. A semi-colon specifies a
; comment
DA IPV4, xx.xxx.xxx.xxx
DA IPV4, xx.xxx.xxx.xxx SCOPE "SLP_xxxx"
End of file. [SYS:ETC\SLP.CFG]
Top of file. [SYS:ETC\TCPIP.CFG]
AutonomousSystem 0
Protocol rip off {
Interface {
Address 10.224.248.152
Port BX2_1_EII_EII
Status on
Cost 1
Poison off
SplitHorizon on
UpdateTime 30
GarbageTime 120
ExpireTime 180
OriginateDefault off
Version ripI
Mode normal
Protocol egp off {
Protocol ospf off {
Interface {
Address xx.xxx.xxx.xxx
Port BX2_1_EII_EII
Status on
Cost 1
AreaId 0.0.0.0
Priority 1
RetransmissionInterval 5
TransitDelay 1
HelloInterval 10
RouterDeadInterval 40
Nbma {
PollInterval 120
Neighbor {
Interface {
Address 10.224.248.152
AddressMask 255.255.255.0
Port BX2_1_EII_EII
Type lan
RouterDiscovery no
SolicitationAddress multicast
NATStatus Disabled
SecIPStatus Enabled
SecIPAddress 10.224.248.119
ArpableSecIP yes
Stubnet off
TOSStatus Disabled
TOSValue 0
ARPTimerStatus Disabled
ARPCacheUpdateTimeout 300
ARPCacheStaleTimeout 300
GroupedInterface no
PrimaryInterface no
LBPolicy 0
Arpable yes
NetworkAddress 10.224.248.0
VIPASupport Enabled
BdgStatus Enabled
ForwardIPSourceRouting off
NATFiltering off
Deadgatewaydetection off {
LoadBalancing off {
LBInterval 2
FaultTolerance on {
FTInterval 2
DefIPAddr 0.0.0.0
End of file. [SYS:ETC\TCPIP.CFG]
Top of file. [SYS:ETC\IPWAN.CFG]
End of file. [SYS:ETC\IPWAN.CFG]
Top of file. [SYS:SYSTEM\ABEND.LOG]
File size is 1839096 bytes.
Only last 200 kbytes of file was scanned.
PVER: 6.50.09
Server XYZSVR1NW halted Sunday, June 5, 2011 9:00:00.069 pm
Abend 1 on P04: Server-5.70.08: Page Fault Processor Exception (Error code 00000000)
Registers:
CS = 0008 DS = 0010 ES = 0010 FS = 0010 GS = 0010 SS = 0010
EAX = 000176D4 EBX = 00000000 ECX = 00000001 EDX = 00000001
ESI = 00000003 EDI = 0000000C EBP = 00000246 ESP = 7682BE2C
EIP = 0023D3E9 FLAGS = 00010002
0023D3E9 8B93C0000000 MOV EDX, [EBX+000000C0]=?
EIP in SERVER.NLM at code start +0002F2C9h
Access Location: 0x000000C0
The violation occurred while processing the following instruction:
0023D3E9 8B93C0000000 MOV EDX, [EBX+000000C0]
0023D3EF B8A0860100 MOV EAX, 000186A0
0023D3F4 85D2 TEST EDX, EDX
0023D3F6 740C JZ 0023D404
0023D3F8 48 DEC EAX
0023D3F9 7409 JZ 0023D404
0023D3FB 83BBC000000000 CMP [EBX+000000C0], 00000000
0023D402 75F4 JNZ 0023D3F8
00

User login on which server?

Hi SDN
Where we have 2 or more servers, how can I, in my javacode find out which server the user has logged on to?
request.getServletRequest().getServerName() just gives me the name but not the "instance"
Thanks
Peter

Thanks,
just what I was looking for
10 p for you
IClusterInformation clusterInfo =
(IClusterInformation) PortalRuntime.getRuntimeResources().getService("com.sap.portal.runtime.system.clusterinformation.clusterinformation");
String serverName = clusterInfo.getServerName(clusterInfo.getNodeId());
Peter

Where can i find the user login form

Hi everyone
Do you know the name of the end user login form? I want to add a button on it but i don't know where i can find it.
Somebody has an idea?

Thanks everyone
I found the solution in the login.jsp (idm/user/login.jsp). I will just add a link which will execute a workflow.
I needed to have the number of failed login attemps. So I uses this code in the login JSP
com.waveset.server.Server _server = com.waveset.server.Server.getServer();
    com.waveset.repository.Repository _repo = _server.getRepository();
    com.waveset.object.WSUser uo = (com.waveset.object.WSUser)_repo.getIfExists(com.waveset.object.Type.USER, "test");
    int nb = 0;
    if (uo != null ) {
        com.waveset.object.ObjectCache _serverCache = _server.getCache();
        uo.setCache(_serverCache);
        nb = uo.getFailedPasswordLoginAttemptsCount();
        %>
            The user is not null <BR>
            nb == <%=nb %>
        <%
    else{
        %>the user is null <BR><%
    }good luck.

End User Unlock and Password Reset in GRC AC 10.0

Hi Dears,
I have an issue related to End User Unlock and Password Reset.
We maintained Data Source as SU01 in SPRO, So that User can able to access GRC Application through End User Login with ECC System login
Details for raise a request.
If user is locked or forget ECC system password, then user not able to access GRC Application through End User Login with ECC System login Details for Unlock or reset Password.
In this situation, how user can unlock or reset the Password for ECC System.
Could you please provide the solution to resolve the Issue.
Note:- No LDAP or Acitive Directory.
System Details :- GRC AC 10.0 , SP12.
Regards,
Karnatak.

Hi Rupesh
That was my warning on the post I linked you to
Quite a few PSS solutions have this as a setup (even SCN). The key thing you are reliant on is that the email account must be restricted to only the user to receive the password/link as well as appropriate Challenge Response Questions defined as part of their registration.
But yes, they can technically enter any User id to request the password and if they know the answers to the questions then they will get the password issue.
Your alternatively is to introduce another system (i.e. AD which you ruled out) or see if there is a way to introduce a second factor authentication (I don't believe this is delivered with GRC).
Regards
Colleen

Anonymous User Login

Hi All,
I have an issue with 'Forgot Password' button in the end user login. When a Forgot Password button is clicked, a Question Login workflow will trigger (I think I am right?) .Now I would like to customize the 'Question Login' workflow as per my requirements, but unfortunately I am not, I modified the system configuration object, but still with no luck I am not able to customize that workflow.
So I thought of using anonymous login page and I can launch my own workflow as per my requirements. I have registered my workflow at 'anonymous end user tasks'. and I try to launch the anonymous login page using the url 'http://localhost:8080/idm/user/anonlogin.jsp'. I am getting the following errors.
An unrecoverable error has occurred processing the request. Contact your system administrator.
Syslog ID = LG-1111-024933.
Only the Reset Administrator may access this view.
I don't know, where I am doing wrong. For the first time I am trying to use anonymous login page.
Did anybody faced similar problems?
Can anybody please post some points, like what is the procedure to use a Anonymous login page?
Thanks in advance

Well, first, I visited Configure > User Interface, and enabled Anonymous Enrollment.
Next, I went to user/login.jsp, and saw "Request Account". I clicked on it, and up popped the user/anonEnrollment.jsp page. (I was looking at using this for one of our requirements; turned out I didn't need it, and did something else).
Anyway, a quick check with Live HTTP Headers for Firefox shows that the post was directly to anonEnrollment.jsp; anonEnrollment.jsp has this at the top:
String anonUser = LoginHelper.getAnonymousUser(session);
if (anonUser == null) {
    String url = "user/login.jsp";
    LoginHelper.redirect(req, out, url);
    return;
}Not a huge amount of help. However, it does establish that there is an "getAnonymousUser" method, which is documented to return "the currently registered anonymous user name if any". And reading the Workflows, Forms, and Views manual, it states that the anonymous main page is for "... when a user who does not have a Identity Manager account logs in, an Identity Manager user object is created ...". Basically, if you're using pass through auth, and have a source system that will let a user authenticate, they can then set themselves up.
So, I visited "anonmain.jsp" after clearing all cookies, and up popped "anonlogin.jsp", with a login box. I entered "anonymous", and lo!, I was logged in, and saw the anonymous user menu. In other words, I was "provisionally" logged in with an account that doesn't really exist (anonymous).
However, I had to provide that extra bit of information, namely, my "fake" user name of "anonymous". I don't know how you'd do that without JSP customization.
Basically, "anonymous" means "has a username, but we don't have an account", rather than "truely anonymous" as near as I can tell. The system will do it for you in the case of "Request Account" (the generated login page has some Javascript code to redirect to anonEnrollment.jsp), but it doesn't seem to be an exposed API.
You might get somewhere with customizing the "Request Account" string in the messages catalogue, and then customizing the anonymous enrollment workflow.

Copy user login

Dear All,
I have a problem about user Login in SQL Server 2008.
because I restore database from another server, user Login for that database already created but not in instance user login. So when user login into instance name they have failed login.
what that i missed before restore database so when user login into instance they do not failed?
or how that i can copy user login from database to instance login? because when i add from add login wizard i have error user already created.
please help.
Best regards,
Surbakti

When a database is moved from one server to another server the login ids stored in the master database do not align with the login ids
stored in each user database or there is no login id or password associated with the user and user in the database becomes ORPHAN.
To fix this problem you need to transfer Logins & password refer below link to Transfer Logins & Passwords.
How to transfer logins and passwords between instances of SQL Server
once you transfer logins fix orphan users, refer below link to fix orphan users
http://blog.sqlauthority.com/2007/02/15/sql-server-fix-error-15023-user-already-exists-in-current-database/
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
Praveen Dsa | MCITP - Database Administrator 2008 |
My Blog | My Page

Portal - cutom message to end users (like sm02)

Hello All,
Is it possible in Enterprise portal to display a custom message (like sm02 in ABAP ) when end users login.
Thanks
Tom

Yes...
1. Buy Software that can do it for you --> http://www.sweetlets.com/w/solutions/system-messenger/
2. Build it yourself.
a. simple html file that you can embed in your framework that you can set on the fly (simple solution)
b. time based publishing of content via KM http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e8/a9a76828b8dc469969ff450ec81ced/frameset.htm (medium solution)
c. develop some application (in webdynpro for example) that can do this all for you (advanced solution).
Cheers,
Benjamin

Find the User ID through which the end user logged in BEx Analyzer?

I want to fetch the end user USERID who is executing the query. I am the end user and want to view a report, so I will login into BEx Analyzer with my userid and start executing query. Is there any way I can find that ID, in any table, program, function module or some where........?
I don't want 'created by', 'last changed by'. I want ID through which end user is logging into in Analyzer.
Also if the end user is logging in through RSRT wanted to know the SAP login user ID through which the user logged in?

Hi,
If you want to see the end user id that is running the query, and then open the workbook, select Layout from the menu u2013 Display Text elements. Click on All (or General, Filters or Variables based on your requirement). It will display the technical name, info provider, current user details. You can save it as existing work book transport to production, then when this query executed you can find end user login id.
May be you can check RSRWBTEMPLATE table for workbook users details. Mostly end user will not have access to RSRT.
Hope it helps you
Thanks
Riyez

CUEAC client login not showing end users in directory

I have done the all configuration for CUEAC with cucm 8.6 but when going to login in CUEAC it is not showing any end user that is already having in CUCM portal.
Please tell me what could be the issue?
I am using the manually end user not with any LDAP system in the CUCM...
thanks

Did you enable the synchronization of directory on CUEAC server? Have you tried re-starting the LDAP-plugin as well (name is misleading as it does not necessarily require LDAP integration)?
Chris

How to configure SharePoint HNSC with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.

Could you please let me know how SharePoint HNSC can be configured with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.
In normal path based site collections/web applications, reverse proxy configuration can be done using alternate access mappings with Public URL = "proxy URL", internal = "HNSC Share Point URL" so that share point sends response back
to Public URL = "proxy URL".
In Host Named Site Collections, alternate access mappings are not supported. Each HNSC is designed to have only one URL in each zone. Zone is one of the five zones(Default,Intranet,Internet,Custom,Extranet) with each of which only one alternate
URL is associated. This is what we are able to get using power shell command "Set-SPSiteUrl", but this will not help us to get the response back to proxy URL after a request sent to share point because we could not find any mechanism in share
point HNSC to respond to a different URL(proxy URL). Consequently, Share Point URLs are exposed to external users.
Below share point article in MSDN blog is symmetrical to what we are observing with Share Point 2013 and Proxy Server. It mentions that internal HNSC URLs can’t be hidden using any proxy server. If hiding the internal Share Point URLS is a requirement,
it suggests to use a web application instead of host named site collections.
Though I’m also observing the same behavior with Share Point 2013 HNSC, Could you please confirm my understanding is correct.
http://blogs.msdn.com/b/kaevans/archive/2012/03/27/what-every-sharepoint-admin-needs-to-know-about-host-named-site-collections.aspx
Excerpt from above article-
"Host Named Site Collections Only Use One Host Name
Continuing on the discussion on AAMs and host named site collections, you cannot use multiple host names to address a site collection in SharePoint 2010. Because host-named site collections have a single URL, they do not support alternate access mappings and
are always considered to be in the Default zone. This is important if you are using a reverse proxy to provide access to external users. Products like Unified Access Gateway 2010 allow external users to authenticate to your gateway and access a site
as http://uag.sharepoint.com and forward the call to http://portal.sharepoint.com. Remember that URL rewriting is not permitted. Further, a site collection can only respond to one host name. This means if you are using a reverse proxy, it must forward the
calls to the same URL. If your networking team has a policy against exposing internal URLs externally, you must instead use web applications and extend the web application using an alternate access mapping."<u5:p></u5:p>

Hi Satish,
You are right that only one URL is allowed for each zone of the host-name site collections in both SharePoint 2010 and SharePoint 2013.
It is by design that each host-name site collection only support one URL for each zone.
The article below is about RTM version of SharePoint, and it is the same for SharePoint 2013 with the latest CU.
https://support.microsoft.com/en-us/kb/2826457
So to make the URL of HNSC not exposed to external users is not supported, you need to use path-based sites instead.
Best regards.
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

End user login to CI server

Similar Messages

Maybe you are looking for