Endless Reboot loop (not jailbroken) while updating to ios 8.2

I have an ipad mini with retina display and while I was updating it to ios 8.2 and it was at the process of restarting i got the blue screen.
I have tried almost everything I could find on the internet. The device wont turn off or restart no matter how long I would hold the power and home buttons
It would still keep restarting and getting the blue screen. I tried connecting it to my mac and restore it with itunes but itunes wouldnt identify the device even though
it was properly connected and my ipad wasnt jailbroken. I also tried the software called Reiboot but it still wouldnt read my device.
the reboot and blue screen process has been going on for hours and I dont know what too do.
any help will be much appreciated.

Assuming that this phone was never jailbroken, put it in recovery mode and restore as described in this article:
If you can't update or restore your iOS device

Similar Messages

IPod Touch 4th gen stuck in reboot loop after attempting to update to iOS 6.1.5

Hi.
I have my iPod Touch 4th Gen (iOS 6.1.3)....I plugged it into my computer, it said there was a software update available. I click ok, it goes through all of it's stuff, gets up to Verifying update with Apple, and then I get an error message.
"The iPod 'iPod Touch 4' could not be restored. It is not eligible for the requested build."
I know this has something to do with Apple not signing the package, but I got iOS 7.0.4 on my iPhone today and it worked fine.
Thanks for all of your guys' help,
-jwukitsch

Try what you have not yet tried:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

TS3694 Hi my iphone 5 is bricked in recovery mode while updating from ios 7 to 7.0.4 and every time when i try to restore Unknoown error 12 pops up.iphone was not jailbroken. please help

Hi my iphone 5 is bricked in recovery mode while updating from ios 7 to 7.0.4 and every time when i try to restore 'Unknoown error 12' pops up each time.iphone was not jailbroken. please help

From the article that your statement was posted from:
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.

Endless reboot loop iphone 4s

The story is, put them ios 6 .., test the week, then decided to 5.1.1 - put and here begins the endless reboot loop ...

You're not making much sense. If you installed the iOS 6 beta, you will hve to take your question to the discussion group provided for registered developers to discuss it.
Beta software can not be discussed in the public forums.
If you are not a registered developer, you are out of luck (not to mention, a thief).

My 5s showed an error while updating to ios 8.1 and it has hanged and its not turning on

my 5s showed an error while updating to ios 8.1 and it has hanged and its not turning on

Did you click on the link just below that that says:
iOS: Device not recognized in iTunes for OS X
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
You have to read the entire support article and follow the subsequent links if the first solutions do not resolve the issue....
GB

CIN: Items are not displayed while updating the RG1 Register using T Code:

Hi Experts,
Items are not displayed while updating the RG1 Register using T Code: J1I5.
System is not showing any error message.
Can any one explain to update the RG1 Register?
Thanks
Chandra

Hi,
dont go the table again and again . the table is updated at intial stage only for stock update but not when SAP is running.
In day to day bussiness the flow is as follows:
Production - MB31 - to Unres stock
Sales - VL02n - PGI - to customer - i.e out of unres stock
Every day u can run TC J1i5 once in a day as decided and update the register so all transactions which have happend in that day gets updated i.e both input and output.
and this will happen every day.
hence dont use table as it is only for intial data upload i.e just before golive.
Hope i am clear.
krishna

Firmware file not compatable while updating ios 6 direct download.

firmware file not compatable while updating ios 6 direct download.
its not a jb,

Are you trying to use Software Update on the iPhone?
Try updating using iTunes.

P6N SLI Platinum – endless reboot loop. Need help!

P6N SLI Platinum – endless reboot loop. Need help!
Configuration;
Windows XP Pro, SP-2
On old hard drive (Maxtor) I installed in the new case
OCZ GameXStream OCZ700GXSSLI ATX12V 700W Power Supply
MSI P6N SLI Platinum
EVGA 256-P2-N550-T2 7600GT
INTEL Dual Core E4400
MEMORY tried two different ones;
GeIL Esoteria 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)
Kingston Value Ram 1GB 667MH (of course tried in different slots, stick @ time)
NEC DVD player/burner
Old Maxtor IDE drive W/OS (I have new Seagate serial but won’t install it until I get everything else running.
Computer goes in an endless reboot cycle. First, showing a black screen with small parallel white hash marks. Can pull up Bios but that’s as far as I can go. At first, I thought the high end Geil memory might be at fault. But after installing the more generic Kingston I get the same looping.
In Bios, it is reading all my hardware; CPU, memory, hard drives, temperatures, voltages, etc. the only thing it doesn’t specifically show is the Evga video card. I don’t know if there is really any place it would show except in Hardware Profile.
One other thing, Bios is showing the NEC as the Primary IDE Master and the Maxtor as the Secondary IDE master (although I have tried it both ways). I generally like to boot first from my DVD then go to hard drive.
I don’t know where to go from here. Can anyone give me some suggestions?
Thanks,
Clickman

two replies;
To Vernonion
With JUST new Sata drive & DVD I get message "Reboot & select proper boot device or insert boot media in selected boot device & press a key" in other words, install windows. No flashing anything.
To Maesus
Yes, have tried boot sequence every which way . DVD functions as I ran Memtest for 4 hours last night.
I think I will use the information mentioned in the 3 links V gave me earlier to "repair" the OS on my old Maxtor drive. It is partitioned with OS in one area by itself, docs in another partition, programs another, etc. so I wouldn't lose any work. At worst, I might have to reinstall some programs. At best, I accomplish what I set out to do.
Many thanks,
Clickman

While updating to ios 6 my iphone has crashed

while updating to ios 6 my iphone has crashed, and is now stuck on the installation screen. anyone know what i can do from here?

I'm having the same problems. Can't even find out if Apple is working on it. Tried to downgrade but is not supported by apple so error 3194 comes up which is verifying with the apple web site. Which then stops everything. I understand you can modify the "hosts" file to by pass the issue, but hate doing that as it gets involved. May try it if I can't get any satisfaction from apple.

Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. Any suggestions please?

Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. I DO NOT have any back ups on itunes. Is there anyway to get out of recovery mode without restoring or recover data after a restore?
Or any other suggestions please? Thanks

As pdroth said, you should have gotten a backup made when you started the update of iOS. If you cannot find a backup, and the phone is in recovery mode, there are no futher suggestions to make. To get the phone working again you have to restore. You cannot force a backup at this time since it is already in recovery mode. It will not allow anything else but a restore at this point.

HT4623 ipad froze and shows itunes with plug while updating with iOS

ipad froze and shows itunes with plug while updating with iOS.

That message means that you have to restore the iPad using iTunes now. Something went wrong. This explains how to do it. Read it thoroughly before you start - and take note of the end of the article under Additional Information where it talks about using recovery mode. You might need to use it.
http://support.apple.com/kb/ht1414

Iphone hung while updating the ios what should i do ?

iphone hung while updating the ios what should i do ?

Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
   1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
       other end of the cable connected to your computer's USB port.
   2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
       until the red slider appears, then slide the slider. Wait for the device to turn off.
              * If you cannot turn off the device using the slider, press and hold the
                Sleep/Wake and Home buttons at the same time. When the device turns off,
                release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
       device. The device should turn on. Note: If you see the battery charge warning,
       let the device charge for at least ten minutes to ensure that the battery has some
       charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
       When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

My new iPad sound is not working after updating to ios 6.1

My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me

Hi,
I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
I Have tried:
- Updating to iOS 6.1.3
-re starting the device
-checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
-going into general settings and reset all settings
-the device reset several times (waiting until I saw the all important apple logo)
-removing the last few apps I installed.
Nothing at all has worked, please help!
New iPadiPad

Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

BSNL is not a supported carrier. Personal Hotspot requires carrier support and provisioning of the account to enable it. iOS 7.1 disabled the ability to manually configure Personal Hotspot on unsupported carriers.

3G is not working after updating to iOS 6.1

My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network, restarting the phone etc.
With this kind of bugs in every update, Apple will no more be THE Apple.
There are bugs which have not been fixed even in the subsequent updates. SMSs going blank being one of them.
Miss you Sir Jobs.....

I have since managed to sort mine out - when the phone was updated it wiped out the network settings.
I was able to reset them by manually putting the information in:
Settings - General - Cellular - Cellular Data Network and then I put in the correct details for APN, username and Password in the relevant sections and now it works OK.
Hopefully it will work for others too

Endless Reboot loop (not jailbroken) while updating to ios 8.2

Similar Messages

Maybe you are looking for