Endless "Stream Overlap" Error Loop Bug Crashes Encore

Endless "Stream Overlap" Error Loop Bug Crashes Encore.
This is the 4 th time I have reproduced the bug.
I burn a Disk image .. and upon completion the "Disk Info" resets to zero bytes under the Build Menu and when checking the Timelines Window the Dialog Box pops up with the "Stream Overlap" Error.
Has anyone else had this issue?
I have read other forum post .. and there is nothing relevant.
I had to rebuild the project twice from scratch.
I'm waiting for my Master Collection 5.5 .. maybe it is fixed in it.

NOTE: There is a issue with Premiere Pro Dynamically Linking with After Effects with file corrupting I am experiencing as well.
Someone offered a solution to rename my files to just words. ( No numbers or other characters )
It still crashes .. and there is still file corruption ... but a "Linked Composition" can be found by "Edit Original" .. whereas it was not found before I changed the filename.
This is a beginning to find the source of the nested bugs.
I am wondering if this filesystem problem is core to the "Stream Overlap" problem noted here.
I have have not reached tech support on the Encore side of this problems as of yet.
This type of file system also has a terrible result for dated files:
On the Mac ( Standard Finder ) :
2011.1.1
2011.1.2
2011.1.9
2011.1.10
2011.1.11
is treated in Adobe Encore as well as other Adobe Suite Master Collection Apps ( On the Mac Platform ) as:
2011.1.1
2011.1.10
2011.1.11
2011.1.2
2011.1.9
This make NO logical sense at all .. and must be some old DOS filesystem?
Timecode
Datestamp
Numbered Outlines
Are all very important ways to organize files / video.
I am surprised that Adobe did not address this years ago.
I have had two Adobe users mention a file system problem that has been known.
Maybe it is the cause of my issues? ... Adobe is mixing two incompatible filesystems on a root level on the Mac platform only. ( Doesn't work with the Mac Finder? )

Similar Messages

Ok back again with 55 error code endless on and off loop

So a few days ago i decided to clean up the computer. Removed/reinstalled/cleaned video card, 2 fans attached to a tall finned CPU cooler (to clean out the cooler fins) with q-tip and compressed air can, and remove filters and some fans to clean. All done with comp air cans and q tips. Had my anti static wristband attached and on a clean table with tile floors. Had to remove 2 sticks of RAM to get one of the fans.
Also decided to add an ssd while i was at it. All went well except i couldn't get into the bios. Booted to windows fine but hung just after del key press just b4 bios setup. Posted in the Bios section for help and I was told to disconnect all hdd's and optical drive and try again. That worked. Reconnected optical...didnt work. Tried just HDD and it worked. Re connected the optical and it worked. Used the same ports as original (when this all started) and it worked. Weird but good to go. Connected SSD, configured windows to "see" the drive, all is good. Then I disconnected the computer, cleaned up a little of the wiring after the new ssd install (nothing was removed or reconnected) and one fan. Put the covers back on reconnected cables and went to bed.
The next day I go to turn on the computer and i get the dreaded 55 error code and have an endless 3-5 second loop of on and off before it even gets to the splash screen. TV shows nothing. Tried CMOS clear every which way. nothing. Disconnected all components except for 1 ram, and CPU....still nothing. Tried several sticks of ram in each. Nothing works. Tried different PSU's...same thing. Disconnected all USB cables, Mouse, and case switches, same thing. Bench tested mobo with different power supply same problem. Tried different power cords still no worky.
I dont know what to do. The mobo is still under warranty. Idk what I did to make it do this. Static, short while reconnecting audio out to a home amplifier. Static while cleaning up wiring? tried bios a and b, neither work.
Please help...I'm about to just go buy a new board and send this one back and have a spare.

When I had the original problem, (not getting into the Bios but booted to OS fine) at the end of disconnecting and reconnecting, I had the HDD and Optical and new SSD connected like original and it worked when it didn't before being connected the same way. Just chalked it up to maybe not connecting something completely.
Now I'm starting to think the problems are related
So it worked BEFORE this latest problem. All I did then was add some zip ties to the new SSD cabling and put the panels back on. Didn't check to see if it worked after that, just assumed it did since I didn't do anything of significance.
Then this. I did think about the can of comp air and yes it can do that. I thought I was being careful enough to not let it do that with just short bursts.
I have not tried to remove and re-seat the CPU yet. I will try later and inspect the pins. At this point I think it can be attributed to one of the following things:
1. The EVO Hyper 212 did kind of twist a little (it always has a little when pressure is applied) and bent a socket pin. When I put the panels back on I did have to clean up one of the push/pull fan wires and did twist the EVO a little.
2. Something shorted/is shorting the board to do with the SATA connections. Maybe the SATA plug to board connection.
3. Compressed air shot out some frozen water and corroded some connection somewhere over night.
4. When plugging in the audio OUT from the back of the board to an amp Stereo L & R IN (converts to Surround Sound), the Amp was on and this jolted the board.
5. The compu-gods have decided to brick my mobo so as to have an excuse to buy a new one.
3 things I have learned. 1. Get a water cooler and not use the big tower coolers. 2. Don't use compressed air especially in swamp-ass Florida. 3. Make sure the crap you plug into the computer is OFF.

TT12241: Backup stream protocol error

Hi there,
I get the following error when replicating TT 6.04 datastore:
$ /data/TimesTen/6.04/bin/ttRepAdmin -duplicate -from UsageCollector -host NODE_B -setMasterRepStart -delXla -localhost NODE_A UsageCollector
TT12241: Backup stream protocol error: bad log data packet length -- file "restore.c", lineno 2865, procedure "restoreLogFileNS"
Unfortunately this error, TT12241, is not described in the documentation. Oracle Support and Google searches don’t return any relevant information.
Have any one came across this problem before?
Thanks,
Igor

I can't find any previous SR reports of the TT12241. No probable candidate bugs are returned either. However I have not seen the -delXla option being used before, so it may have something to do with using this option. Are you able to exclude this option from the ttRepAdmin -duplicate, and allow the bookmarks to be copied over? You could then connect to the newly created datastore and try to manually delete the bookmarks using "xladeletebookmark".

Iphone 5 endless connect to itunes loop

after trying to install ios 7.1.2 it got hung up during the installation via itunes and the phone itself just turned off and is now stuck in a endless connect to itunes loop and it wont come out of it also no luck in restoring the phone i get a unknown error (3)

Thanks for the helpful questions Behin.
Thanks tt2, both those posts contained basically the same thing and what solved it for me. I had reviewed that Apple support document (http://support.apple.com/kb/TS1538) before but was confused at what to do after not finding the Apple Mobile Device USB Driver listed. Step 6 said "Look for the entry that recognizes the device as a camera. This entry should be called Apple iPhone, Apple iPad, or Apple iPod." but didn't indicate to follow either of the next two sections depending on what I found or didn't find. Glad I was pointed back to it.
I gleened the solution from the section "If only Apple iPhone, Apple iPad, or Apple iPod appears" however Cerbu's post is more what I did: instead of clicking "Let me pick from a list..." I just browsed to the location indicated in the support document and clicked Next and it was done.
Solved for me

Loop Browser Crashes Logic

I have "upgraded" from Logic 7 to 8 (actually a downgrade in my opinion) and then to Logic 9. Now in L9, the Apple Loop browser crashes logic. It will not reindex. I can't play anything back, any activity in the browser crashes Logic. I've seen this post;
Rebuilding the loop index :
Quit Logic if it is open.
Place the folder /Library/Audio/Apple Loops Index/ in the trash. (Note: GarageBand 1 and Jampacks 1-3 used a different location. See Where loops get installed for more information).
Open Logic.
Drag the folder /Library/Audio/Apple Loops/ from the finder into the Loop Browser in Logic.
Will this fix the problem? I'm concerned that this may screw up my browser in L7 or L8 both of which I continue to use. I also have a lot of 3rd party Apple Loops that are in the browser.. what will happen with these?
Any help is appreciated.
Dan Rad

Those instructions you found somewhere are probably fine, but you might as well use the Apple version. Follow this procedure: "Logic: Rebuilding the Loop Index."
It will probably solve the problem, and it won't do any harm.
If it doesn't solve the problem, there are some other things we can try, so let us know.

Stream closed error while testing a composite in EM

HI,
I have deployed a simple composite and wanted to test it in EM. I am getting a stream closed popup, not sure whats wrong?
I have restarted the server and problem still persists.

its actually remote server, I am able to deploy a simple HelloWorld composite and even able to see the same in Em.I can even browse through all the composites deployed there by many other people.But problem is when I try to test it its giving the Stream closed error.
Is it something to do with access permissions, if so i would not have deployed it in first case..
the pop up error message----
Stream Closed
For more information, please see the server's error log for
an entry beginning with: Server Esception beginning with PPR, #14
_______________________________

Audio Looping bug in rendered output

I've hit a recent issue where I'm getting audio looping / stuttering bugs in the rendered output. Doesn't happen at the start of the clip, but elsewhere if I fade everything down to black / nothing, and then fade up again into the next clip, the audio loops / stutters during that fade in. Using "Constant Power" to bring up the audio from nothing to full. Clip plays fine in Premiere, just the final output has the issue. Have encoded audio as both WAV and AC3, same issue.
Curiously, if I output a WAV file only (no video) straight from Premiere, it is clean. That's how I'm now working around this, and coding the AC3 track in Audacity when required. Also (even more curiously!) I recently installed Audition, I'm wondering if that has messed anything up in Premiere. Audition wasn't actually used in any of these corrupt projects (and the project I used Audition for was fine as far as I am aware), but I've never had it installed until 2 or 3 weeks ago.
Anyone else hit this, or know how to fix it? Between this and the video render issue I posted a couple of months back (still not resolved), I'm rapidly losing faith in Adobe's encoding tools.
I can post some example clips if anyone wants a listen. Reminds me of the XDCAM looping bug that existed a while back, although the scenario there was somewhat different (audio at the end of the clip looped, and my current video is AVCHD from a Sony NX5, not XDCAM).
Premiere Pro CC 7.2.1 (4)
Media Encoder CC 7.2.0.43 (64-bit)
Audition 6.0 Build 732 (64-bit)

Hi madmaxmovies,
Thanks for posting on Adobe forums,
Please follow suggestion provide in this link http://forums.adobe.com/message/5997457
Thanks,
Sandeep

PowerPivot 2012 Error: BaseWorkbook.CacheStream: Failed to read from stream. Error was: System.Data.SqlClient.SqlException: The EXECUTE permission was denied on the object 'proc_FetchChunkFromDocStreams', database 'SharePoint_AdminContent'

Hi, I have setup PowerPivot 2012 for SharePoint, but when I access'PowerPivot Management Dashboard' in Central Admin I get error message 'An error has occured'
Below is the error in the ULS,
Background file fill operation caught exception: System.Data.SqlClient.SqlException: The EXECUTE permission was denied on the object 'proc_FetchChunkFromDocStreams', database 'SharePoint_AdminContent_ca021d58-ef1f-4f30-9aeb-6f24db24862b', schema 'dbo'.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.CompleteAsyncExecuteReader()
at System.Data.SqlClient.SqlCommand.InternalEndExecuteReader(IAsyncResult asyncResult, String endMethod)
at System.Data.SqlClient.SqlCommand.EndExecuteReader(IAsyncResult asyncResult)
at Microsoft.SharePoint.CoordinatedStreamBuffer.AsyncSqlSession.EndExecuteReader(IAsyncResult ar)
at Microsoft.SharePoint.CoordinatedStreamBuffer.SPBackgroundSqlFileFiller.OnReadComplete(IAsyncResult result)
BaseWorkbook.CacheStream: Failed to read from stream. Error was: System.Data.SqlClient.SqlException: The EXECUTE permission was denied on the object 'proc_FetchChunkFromDocStreams', database 'SharePoint_AdminContent_ca021d58-ef1f-4f30-9aeb-6f24db24862b',
schema 'dbo'.
at Microsoft.SharePoint.CoordinatedStreamBuffer.SPBackgroundFileFiller.Fill()
at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBuffer.WaitForIntervalFill(SPInterval i)
at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedMemoryStream.Read(Byte[] array, Int32 offset, Int32 count)
at Microsoft.SharePoint.SPFileStream.Read(Byte[] buffer, Int32 offset, Int32 count)
at Microsoft.Office.Excel.Server.CalculationServer.BaseWorkbookManager.CacheStream(CachedFile cachedFile, FileLoader loader)
Regards,
Ayaz
SharePoint Architect

Hey Ayaz,
I do had the same error message when I click on "PowerPivot Management Dashboard". After few research I resolved this issue.
You need to provide the dbReader and dbWriter permission to powerpivot app pool account at "SharePoint_AdminContent_ca021d58-ef1f-4f30-9aeb-6f24db24862b"
Have a great day :-)
Santosh sethi

TS3989 I keep getting this error when I click on the link inviting me to join a Photo Stream: "An error occurred while joining the Photo Stream. Please try again later. "

I keep getting this error when I click on the link inviting me to join a Photo Stream: "An error occurred while joining the Photo Stream. Please try again later."
I was the one who set up the Photo Stream and sent the link to myself. I called Apple and they said I did everything right and the server must be temporarily down, but it has been the same for the better part of a day.

None of the fixes above worked for me. Continued getting the "try again" error message.
Tryed a bunch of things, such as going directly to icloud on Safari to open the mail message, no luck.
Tryed the following;
Went to iCloud and logged in via Safari, clicked on my account name in top right corner, selected "Advanced" on drop down menu, and selected "Reset Photo Stream".
Turned off Photo Stream on all devices and iPhoto.
Turned on Shared Photo Stream option on Mac iCloud preferences.
Tried the "Join This Photo Stream" button in my Mac Mail app .me account again.
Still got the error message.
Forwarded the original mail message to a yahoo account, selected "Join this Photo Stream" in the yahoo account mail (still in my Mac Mail app), and lo and behold, iPhoto opened and displayed the photos.
Could be this would have worked right from the start.
Oh yea, still get the "try again" message if I click on the Photo Stream button in my .me account.

Cannot start any of my creative suite 4 programs I get a error and it crashes

When i try to open any of my adobe software from creative suite4 for mac i get error and it crashes it nevr opens

What operating system are you running NOW?
If you've upgraded to Mavericks (Mac OS X 10.9.3) or Windows 8.1, it probably a crapshoot whether you can get it to run because the software is too old.
You can try using the Adobe Cleaner tool here, then reinstall:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Other downloads

Weird repairing disk error loop

My computer seems to be to be stuck in the "repairing disk error" loop though, unlike in most people cases, mine does not end up to the blue screen. Ive left it on hoping it would give me the option but its been 2 days already and its just repeats
the usual statements everyone gets before the blue screen occurs. Could someone please help find a resolution to this. Much appreciated.

They'll help you over here.
Windows forums on Microsoft Answers
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Internal error or labview crash in 7.1ver thread.cpp(2842) whats reasons and how to fix it

Hi
Everybody ,
I am working with pci-6723 and labview 7.1 yesterday when iwas testing , the programme was running , suddenly the power has gone , since i have not connected my system to UPS system got shutdown , and when i booted pc its higlighted this error , now to what extent this problem affects to my software, and how to fix it.
"Internal error or labview crash in 7.1ver thread.cpp(2842) whats reasons and how to fix it"
Thanks in advance
Rajesh

Hello Rajesh,
Do you get this error frequently or you got it only once after the power shutdown? Are you making a call to a DLL in multithreaded environment? Try mass compiling the VI by going to Tools->Advanced->Mass Compile. Also please follow the suggestions provided in this knowledge base entry regarding thread.cpp and see if that will fix the problem:
http://digital.ni.com/public.nsf/websearch/01B186B5CEB1D07786256747000F4319?OpenDocument
If you continue to have this error, is there any way you can send me a pared-down example demonstrating what your program does, so I can at least investigate to see if I can narrow down the cause of the thread.cpp failure?
Thanks and good luck!
Shakhina P.
National Instruments

Error: Internal/Bug( #609) Automation server can't create object

Hi Friends,
I am new to Oracle BPEL.
I am getting the following error message when I click Flow,Audit and Debug tabs after deploying the process.
Error: Internal/Bug( #609) Automation server can't create object
Had anybody faced this problem and resolved it?

IIRC this can be down to browser security setting. You may find you needs to turn some security options on (or at least set to 'prompt' under tools- > internet settings -> secuirty - > custom level... etc

Bug in encore oder grenze des dvd-standards?

hallo,
sind 120 menüs für eine dvd zu viel? encore erstellt mir wirre dvds die nicht mit der vorgesehenen start-menü beginnen sondern wild mit irgendwelchen filmen. die 120 menüs waren die ganze zeit schon im projekt und zwischenzeitliche vorschauen liefen prob-los. erst seitdem alle 120 menüs komplett verlinkt sind gibt es dieses fehlverhalten in der finalen dvd-erstellung.
bug in encore 1.5 oder doch magische 99er-grenze (obwohl es anfangs auch mit den 120 ohne links lief)?
kann mir jemand weiterhelfen, ich finde nichts darüber in anderen foren ...
gruß wini

Hi
Sollte die Auflösung von MPEG1 nicht
352x288 sein, ansonsten ist es noch immer besser mit den vollen format von 720x576 zu arbeiten auch vom VHS format.
mfg. josef

[svn:fx-trunk] 12294: * Fix for error reporting bug.

Revision: 12294
Revision: 12294
Author:   [email protected]
Date:     2009-11-30 13:25:28 -0800 (Mon, 30 Nov 2009)
Log Message:
Fix for error reporting bug. The bug was caused by a warning being
reported during one compilation and then an error being reported in
a following compilation. Due to the warning, the Source's logger
was disconnected instead of being nulled out during the first
compilation. Then in the second compilation, we weren't reassigning
the logger, so the disconnected logger was being left in place. As
a result, it was throwing off expected error counts and caused an
assert to fire.
QE notes: There is probably an easier way to reproduce the assertion
          that George hit without having to create multiple projects
          and without having to manually copy SWC's around. I didn't
          realize this until I had a fix, though. One key aspect that
          George didn't note and might not have realized, is that the
          variable needs to cause a warning, so leaving off a
          namespace works, but making it public, private, etc doesn't.
Doc notes:
Bugs: SDK-24314
Reviewer: Corey
Tests run: checkintests
Is noteworthy for integration: fixes FB issue
Code-level description of changes:
Modified setLogger() to always reassign logger.
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24314
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/Source.java

Endless "Stream Overlap" Error Loop Bug Crashes Encore

Similar Messages

Maybe you are looking for