Endpoint policy is applied but client not reflecting settings

Hi
We have setup SCCM 2012 SP1 (post the 2012 SP1 republish) and i'm having issues with the SCEP policy applying.
Basically the policies are setup within the config manager console and are distributing out to the clients, the config manager console displays the correctly assigned policy and discovering the various policies applid via checking registry or powershell
commands also reflects this from the client end.
the endpointprotectionagent.log is telling me that the EPAMPolicy.xml policy has been successfully applied and the contents of EPAMPolicy.xml correctly reflects the settings i have defined via config manager.
yet when i open the actual client it does not reflect any of these settings and appears to just have the default settings.
any suggestions?

Hi,
I don't know if you managed to resolve this. But I had similar issues and after some detective work this was being caused by another group Group policy setting preventing the processing of local group policies. Specifically, the offending setting and explanation
is listed below:
Setting Path:
Computer Configuration/Administrative Templates/System/Group Policy
Setting: Turn off Local Group Policy objects processing: Enabled
Explanation
This policy setting prevents Local Group Policy objects (Local GPOs) from being applied.
By default, the policy settings in Local GPOs are applied before any domain-based GPO policy settings. These policy settings can apply to both users and the local computer. You can disable the processing and application of all Local GPOs to ensure that only
domain-based GPOs are applied.
If you enable this policy setting, the system will not process and apply any Local GPOs.
If you disable or do not configure this policy setting, Local GPOs will continue to be applied.
Note: For computers joined to a domain, it is strongly recommended that you only configure this policy setting in domain-based GPOs. This setting will be ignored on computers that are joined to a workgroup.
Make sure the setting is either set to disable or not configured.
The image below shows a RSoP on a computer where policies are applying successfully. As you can see, antimalware settings are being applied as local group policy settings
Hope this helps

Similar Messages

I updated the spelling of a song in my itunes but its not reflecting when i check my ipod. this never happened before when after i updated to IOS5. please help.

i updated the spelling of a song in my itunes but its not reflecting when i check my ipod. this never happened before when after i updated to IOS5. please help.

Try unsyncing the sone and then resyncing. That works sometimes. Sometimes restoring from backup works. Other times nothing seems to work.. Yuo are not alone since iOS5 and iTunes 10.5/6.

SCEP client not updating settings after policy retrieval

I have a computer assigned a SCEP policy, that seems to have been found and Applied fine by the SCCM Client, looking at the registry.
I find the policy in the regkey HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\CCM\EPAgent\GeneratedPolicy, With the DWORD values
Just a test to my computer (Excluded) REG_DWORD 0x00000002 (2)
Just a test to my computer (Scan Schedule) REG_DWORD 0x00000002 (2)
What I have configured in this test policy is just "Limit CPU usage during scan to: 10%" and "Start the scheduled scan only when my PC is on but not in use"
But the SCEP Client, in the settings, do not show the correct settings. The CPU limit setting is set to 20% and the "Start the scheduled scan" setting is unchecked, these settings come from the "Default Client Antimalware Policy"
The EndpointProtectionAgent.log says:
Endpoint is triggered by WMI notification. EndpointProtectionAgent 28.10.2014 16:54:39 3504 (0x0DB0)
EP State and Error Code didn't get changed, skip resend state message. EndpointProtectionAgent 28.10.2014 16:54:39 3504 (0x0DB0)
State 1, error code 0 and detail message are not changed, skip updating registry value EndpointProtectionAgent 28.10.2014 16:54:39 3504 (0x0DB0)
Previous state is same with current one: 1, skip notification. EndpointProtectionAgent 28.10.2014 16:54:39 3504 (0x0DB0)
File C:\Windows\ccmsetup\SCEPInstall.exe version is 4.5.216.0. EndpointProtectionAgent 28.10.2014 16:54:39 3504 (0x0DB0)
EP version 4.6.305.0 is already installed. EndpointProtectionAgent 28.10.2014 16:54:39 3504 (0x0DB0)
EP 4.6.305.0 is installed, version is higher than expected installer version 4.5.216.0. EndpointProtectionAgent 28.10.2014 16:54:39 3504 (0x0DB0)
The trigger 10 doesn't make ANY state change. EndpointProtectionAgent 28.10.2014 16:54:39 3504 (0x0DB0)
Handle EP AM policy. EndpointProtectionAgent 28.10.2014 16:54:39 3504 (0x0DB0)
Policy group lose, group name: Scan Schedule, settingKey: {d6961d76-070d-46af-b898-6d24562fb219}_201_201 EndpointProtectionAgent 28.10.2014 16:54:39 3504 (0x0DB0)
Policy deployment result: <?xml version="1.0"?><Group Name="Scan Schedule"> <Policy Name="Just a test to my computer" State=2/> <Policy Name="Default Client Antimalware
Policy" State=1/></Group><Group Name="Threat Default Action"> <Policy Name="Default Client Antimalware Policy" State=2/></Group><Group Name="Excluded">
<Policy Name="Default Client Antimalware Policy" State=2/> <Policy Name="Just a test to my computer" State=2/></Group><Group Name="Realtime Config"> <Policy Name="Default
Client Antimalware Policy" State=2/></Group><Group Name="Advance Setting"> <Policy Name="Default Client Antimalware Policy" State=2/></Group><Group Name="Spynet">
<Policy Name="Default Client Antimalware Policy" State=2/></Group><Group Name="Signature Update"> <Policy Name="Default Client Antimalware Policy" State=2/></Group><Group Name="Scan">
<Policy Name="Default Client Antimalware Policy" State=2/></Group> EndpointProtectionAgent 28.10.2014 16:54:39 3504 (0x0DB0)
Generate Policy XML successfully at C:\Windows\CCM\EPAMPolicy.xml EndpointProtectionAgent 28.10.2014 16:54:39 3504 (0x0DB0)
Generate AM Policy XML while EP is disabled. EndpointProtectionAgent 28.10.2014 16:54:39 3504 (0x0DB0)
Any idea what happened to the New settings?
Freddy

Antimalware Client Version: 4.6.305.0
Engine Version: 1.1.11104.0
Antivirus definition: 1.187.618.0
Antispyware definition: 1.187.618.0
Network Inspection System Engine Version: 2.1.11005.0
Network Inspection System Definition Version: 113.5.0.0
Policy Name: Antimalware Policy
Policy Applied: 02.09.2014 at 14:16
The above is information in "About"
This is the information about the Antimalware policies assigned to this computer
Name
Collection name Priority Policy Application state Last update time Policy Application Return code
Default Client Antimalware Policy 10000
Succeeded 02.09.2014 16:16:00 0x00000000
Just a test to my computer VITN-SC-OSL-112 1
This tells me that there is no policy Application Return code for the custom policy i am testing, and that is something I would like to solve. Any ideas? Thank you

Outlook and 9500 Sync but do not reflect updates

I have Outlook 2003 and the latest version of PC Suite (6.??).
WHen I syncronise, either via the 9500 or via the PC, they both reflect that updates have taken place for contacts and dummy calendar entries I have entered (some on the 9500 and others in Outlook's Calendar).
When I view the 9500 Calendar it shows all of the entries I made on the 9500 but has not imported any from Outlook even though the log states that 1 update was made.
My Psion 5mx used to sync in seconds!
Update:
Stranger still, One of the entries made by the Psion 5mx and then synced up to Outlook HAS copied across. It was a repeating day entry and my 9500 is reflecting this.
Arrrrrgh - I hate having new toys that I can't use!
Anybody out there got any bright ideas?

Hello,
Please try the following :
First you can reset the PC Suite profile on the phone. Herefore you go on the inner side of the device to Desk -> Tools -> Device management -> you will see here the PC Suite profile -> You press the Menu button and choose Delete
After this you press again the Menu button -> Tools -> Reinstate PC Suite profile.
After this you close device management, and reboot the phone, by removing the battery from the device during 10 seconds, and placing it back.
On your PC you remove the following directories :
C:\Documents and Settings\%USERNAME%\Application Data\PC Suite\ConfServer
C:\Documents and Settings\%USERNAME%\Application Data\Nokia\ContentCopier
C:\Documents and Settings\%USERNAME%\Application Data\Nokia\PCSync\SynchData
C:\Documents and Settings\%USERNAME%\Application Data\Datalayer
C:\Documents and Settings\%USERNAME%\Phone Browser
(you replace %USERNAME% by the username with which you're logged in in Windows)
After this you reboot your computer and try again.
If this still fails the correct version number of PC Suite would help. You can find this in the main screen of PC Suite if you go to Help -> Info

Updated new email & password in itunes but changes not reflected in iphone

I'm using iPhone4 and have updated my new email address and got a new password in my itunes account but the changes are not reflected in my iPhone so i cannot purchase apps with the iphone, only when connected to the store on my computer. Please tell me how I fix this problem?

And I tried syncing my phone after making the changes and it still isnt working.

SCCM 2012 client not reflecting name change

I have a computer that is running the SCCM client that was recently renamed because it was moving locations (the computer names reflect department and building). So I renamed the machine but it's still reflecting the old computer name in manager
console(it's been about 5 hours since the name change), do I need to remove the client and reinstall it to get it to update properly or should it be doing this automatically?

http://myitforum.com/cs2/blogs/rzander/archive/2008/08/11/sms-sccm-commandline.aspx
Use Trigger DataDiscoverRecord (DDR) update in the above post.
Jason | http://blog.configmgrftw.com

AD SSO Service Starts, But Client Not Performing SSO

Hi.
I hope someone can help me with this issue.
I have a NAC environment in which NAM and NAS are operating in high availability mode. The NAS is in Out-of-band Virtual gateway mode, and I have configured AD-SSO.
Users in local database (NAM) can authenticate as normally.
My problem is that users can not authenticate via AD-SSO functionality.
The AD-SSO service is up and running, but when a user tries to login into the domain (with the AD credentials), the attempt is unsuccessful and the user gets the NAC agent. For testing purposes, I have allowed data traffic from untrusted side (unauthenticated roll) to the DC domain to any port.
Does any body can help me to find which my problem is?
I have gotten the logs from the command “more /perfigo/access/tomcat/logs/nac_server.log”. I can not see any traffic to port 8910 (but there is traffic to port 8905). Besides, if someone knows where can I find documentation which helps to interpret the logs, I will thanks to share it with me.
I am attaching a document with the details.
I really appreciate your help.
Regards.

Hi Damaso,
For your reference, here is the full procedure of how the CAS should authenticate the user with AD SSO:
1. The user logs in to Windows and obtains a Ticket-Granting Ticket (TGT) from the kerberos Authentication Service on AD.
[here the CAS is not involved]
2. The Agent starts and the CAS instructs the Agent to get a kerberos Service Ticket (ST) for the SSO Service from the AD server.
[here the CAS is involved]
3. The user sends its Ticket-Granting Ticket (TGT) to request the Service Ticket (ST) from the kerberos Ticket-Granting Service (TGS) on AD.
[here the CAS is not involved, as long as all the communications from/to AD are allowed for the unauthenticated role]
This Service Ticket (ST) can be seen through the Microsoft Kerbtray.exe tool.
4. The Agent sends the Service Ticket (ST) to the CAS for the user authentication and role mapping.
[here the CAS is involved]
The Kerbtray.exe tool allows us to display the Service Ticket (ST) obtained by the user from AD, that will then be sent by the Agent to the CAS.
Could you confirm through Kerbtray whether the user is getting the right ST?
http://www.microsoft.com/download/en/details.aspx?id=17657
If a user does not have any Service Ticket (ST) at all there may be an issue with AD (considering the fact that the CAS is already allowing all the traffic to/from AD).
The user may either be unable to send the Ticket-Granting Ticket (TGT) to AD, or it may be unable to obtain the Service Ticket (ST) from AD.
The CAS during this phase is neither performing any actions nor blocking any traffic, since all the communications to/from AD are already fully open in the unauthenticated role.
Regards,
Fede
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Address of the user changed updated into sap but still not reflecting at

address of the user changed updated into sap but still srm shopping has the old
address .
what could be the possible reasons of this bug?

Hi
Which SRM version are you using ? We encountered the Same Issue long time back ->
Are you updating the Addresses in Web Transaction or using SAP GUI (SU01 transaction) ?
Please go through the following SAP OSS Notes below, which will definitely help ->
Note 930371 - SRM 5.0: BBPUM01 Check Data
Related Notes
Note 931556 - SRM 5.0: Hiding the BBPUM01/BBPUM02 button
Note 923461 - SRM 5.0: BBPUM01 description for position
Note 885954 - SRM-UME: User synchronization with wrong address data
Note 884067 - BPartner w/o an private address can't change their settings
Do let me know.
Regards
- Atul

I want to remove iCloud but can not find settings

How do I remove iCloud from my apple 2?

settings > iCloud, scroll to the bottom of the page and 'Delete Account'.

Navigational Attribute Transported but not reflected.

Hi,
Couple of Navigational Attributes were transported from Dev to QA.
But its not reflecting in QA now.
In the Transport Log its giving the warning message message as,
Navigation attribute ZABCLOC_ZZLINETYPE1 is deleted (not in characteristic ZABCLOC)
Navigation attribute ZABCLOC_ZZABCLOC1 is deleted (not in characteristic ZABCLOC)
Please let me know, how to transport the required Navigational Attr from one system to another system
Thanks,
Sowrabh

if the primary object is not active then u will face issues..
here as its quality u can try deleting the P table content of the Infoobject and then try activating that infoobject in the Quality system with the program.. some this like it starts with RSDG or RSVDIOBJ Activate.. u can try this in ur system...
and then try reimporting it with the overwrite mode.. this is will solve ur issue.
thanks
Vishnu

Some clients not receiving SCEP definition updates

I have a collection for some of our application servers that is used in conjunction with an ADR to deploy the SCEP definition updates. 12 of the servers in this collection recently had the SCCM 2012 R2 client installed on them. (The collection has a total
of 23 servers in it)
I can see that these 12 servers have the Antimalware policy applied, but are not getting the SCEP updates. The summary for SCEP is: Service started without any malware protection engine; AV signatures out of date; AS signatures out
of date.
The policy application state is "Succeeded" with the recent date and time.
When I view the status of the deployment, the enforcement state is "Failed to install update(s) " with an error code of 0X87D00667 - No current or future service window exists to install software updates.
These servers are members of another collection that is used for deploying the Monthly updates. This "update" collection does have a maintenance window on it specific to software updates, with no recurrence schedule.
Do maintenance windows apply to the machine then, regardless of what collection they are in?
These 12 servers, for the Endpoint Protection client settings have the "Allow EP client installation and restarts outside MW" set to No, and the Suppress any required computer restarts after the EP client is installed set to Yes.
For the Software Updates client setting, the update scan schedule and deployment re-evaluation is set to every 7 days.
So, in looking at this, it appears that these servers will never get any SCEP updates because they are members of another collection that has a MW, even though the SCEP collection does not have a MW?
Is that correct?

I added a MW on the collection that is used for SCEP updates. I made the MW effective yesterday, but the MW hours were from 5:30am-7:30am daily (which should have started this morning, 1/30, at 5:30am).
In the updatesdeployment.log, I see the MW starting:
CUpdateAssignmentsManager received a SERVICEWINDOWEVENT START Event UpdatesDeploymentAgent 1/30/2015 5:30:00 AM 3004 (0x0BBC)
No current service window available to run updates assignment with time required = 1 UpdatesDeploymentAgent 1/30/2015 5:30:00 AM 3004 (0x0BBC)
CUpdateAssignmentsManager received a SERVICEWINDOWEVENT END Event UpdatesDeploymentAgent 1/30/2015 7:30:00 AM 3312 (0x0CF0)
No current service window available to run updates assignment with time required = 1 UpdatesDeploymentAgent 1/30/2015 7:30:00 AM 3312 (0x0CF0)
Attempting to cancel any job started at non-business hours. UpdatesDeploymentAgent 1/30/2015 7:30:00 AM 3312 (0x0CF0)
However, the definitions are not installed. These 12 servers have the SCEP client, but no definitions installed.
There are 11 servers in this collection that are getting the definition updates, but the 12 servers in this collection that have recently had the SCCM client installed on it are not getting the updates. So I know that the ADR is working.
What am I missing to get these 12 servers to install/update the definitions?

PO no not reflecting in GL/ Vendor line item display

Hi Guys,
Please let me know that why PO no (column is displaying but) data not reflecting in GL/ Vendor line item display using TCode FS10N? What may the possible reasons and how I can get the data flow in the column?

Hi Amit,
You are right and I've changed the layout. I've already said that the field displaying there but data is not flowing in the field. I mean to say that PO no is not reflecting in the specified field. However I am able to get the PO no. in Assignment field. What may be the reason and how I get the data (PO no.) in this field?

Changes in Logonlables.properties are not reflecting in Logon screen in EP

Hi frndz..
Am chnaging the logon screen branding image and text and also the WELCOME text n the copy rights text also.
For this am following a like in that itz saying to take the PAR file "com.sap.portal.runtime.logon.apr"
from the following localtion.
<J2EE_Engine_Instance>\j2ee\cluster\server<X>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd.
but i didn't find any par like above the above specified location, but i found tha same par in the path of
<J2EE_Engine_Instance>\j2ee\cluster\server<X>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\temp.
so i taken tha PAR from ther n made the chnages in same PAR only i did't renamed PAR in same par only i made the chnages but itz not reflecting after server restart also
Thanks in Advance
Regards
Rajesh

Hi,
Why don't you try from portal end? downloading and uploading the par file from portal.
Check this blog https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60caa539-8e51-2a10-0e83-e0a68ab3f5aa
PradeeP

Changes to Query not reflected in views

We want to use various views off of a 'master' query to publish in our portal. I was working on the assumption that an advantage of the views was that if a change needed to be made it could be made in the query and then all the views off of that query would reflect the change. However I have discovered that some changes made in the query do not get reflected in the views. For example if I change the scaling on a key figure, this change does not get reflected in the views. In one case, as a test, I modified a formula in the query and also changed the scaling. The view reflected the modified calculation but did not reflect the new scale.
Does anyone know how to force these type of changes or is there documentation that at least list those changes made to the query that will not get reflected in the views?
Any help would be appreciated.
Stan Pickford

Hi Stan,
in general: Everything which belongs to the query view object won't be overwritten by query changes.
What belongs to the query view object? Basically everything you can change during execution of a query (Dynamic filters, Drill-Down-State, Properties of characteristics, structure elements (keyfigures) and Query-View).
What does not belong the query-view object: Definition of structure elements, Navigation space (characteristics available during runtime), Static filters.
Heike

Business area does not reflecting in IT 0001

Dear Expert,
I have assign cost center to organization unit, then hire employee through PA40, so position assign into IT0001,
system pick up the cost center but does not reflecting the business area in infotype 0001.
i checked with FI consultant, there is proper intergation between cost center and business area.
Please tell me, how to resolved this issue.
Many Many Thanks
Urvashi

Hi Urvashi,
You will get the Default values for Company code, Personal area, Personal Sub Area and Business Area because of Account assignment infotype - IT1008 - for your position or Org Unit
check from PO10 or PO13 and infotype 1008.
You will have PA value defaulted on IT 0000 screen and others defaulted on IT 0001 screen.
You can change these values on respective screens. A warning will be issued but you can overwrite them.
Regards,
HARANATH

Endpoint policy is applied but client not reflecting settings

Similar Messages

Maybe you are looking for