Ene cir receiver I/O Range Conflict Problem

Hi everyone,
I have a problem which is "Input/Output Range 0380 - 0383 used by: Motherboard resources" problem under conflicting device list under ENE CIR Recevir. My machine is dv7-2133et and I have win7 32bit ultimate. Please help..
Thanks in advance..

Hi,
I have a Pavilion DV6-1245dx, and the same problem with "ENE CIR Receiver",
Input/Output Range 0380 - 0383 used by:
Motherboard resources
I have Windows 7 HomePremium x64, and it's after a clean install(I tried clean installs with different order to how I install drivers), and it happens no matter the order in which I install the drivers. I have the latest driver(tried older ones too) for ENE CIR Receiver, I tried the solution with PCI Lock, but no succes, the remote control still doesn't work(meaning the laptop doesn't receive the signal, but the remote is functional).
Any news about this problem and how to fix it???
Thanks!!!

Similar Messages

I need the correct driver for an infrared remote control (ENE CIR receiver) for Pavilion DV4-2173nr

I need the correct driver for an infrared remote control (ENE CIR receiver) for Pavilion DV4-2173nr.
The receiver that came with my notebook is a black model one (see picture below), with the following information in its bottom label:
RC1762302/00
3139 228 50021
HP SPS: 435743-001
HP: HSTNN-PRO7
RC6 ir
CP06 60808 A 146218 REV. B
I never managed to make it work, from the very beginning. I know it is working, because I replaced the battery for a brand new one and it shows a blinking IR LED when I press any button and point it to a digital camera.
Searching for "ENE CIR receiver driver" is useless 'cause I received more than one hundred answers - I tried four of them but none worked so far.
So, instead of trying the whole bunch, I am crying for help - could someone please tell me which driver is the correct one for this remote model?
Thanks in advance and regards,
Mike
P.S.: I am using Windows 7 Ultimate 64-bit and Ubuntu 12.04 in this notebook

http://ftp.hp.com/pub/softpaq/sp46501-47000/sp46741.exe
File name:
sp46741.exe [1/1, 1.04M]
System requirements:
No additional prerequisites
Released:
2009-12-31
Version:
2.7.4.0 A
Compatibility:
Microsoft Windows 7 (32-bit), Microsoft Windows 7 (64-bit)
Fix/Enhancement:
Original Software/Drivers

GX633 - ENE CIR I/O conflict with Motherboard Resource

Hello everyone...I'm a newbie here.
I have MSi GX633 here with latest BIOS and official MSi driver (except VGA and Sound), running Windows 7 Professional x86.
I've own my notebook for 2 year, and just found this yesterday.
Recently found that my ENE CIR Reciever driver had conflict with Motherboard Resource...
Iam opening Device Manager, and then when I check ENE CIR properties, on General tab it say "the device is working properly".
But on the Resource tab it say "Input/Output Range 004C - 004F used by: Motherboard resources".
So I search Motherboard resource device on the System Device. It is hidden by default. Looks on the properties, on resource tab and found conflict message too.
It said :
Input/Output Range 0044 - 005F used by: ENE CIR Receiver
Input/Output Range 0062 - 0063 used by: Microsoft ACPI-Compliant Embedded Controller
Input/Output Range 0065 - 006F used by: Microsoft ACPI-Compliant Embedded Controller
Any one share same problems here with your GX633 or another notebook with ENE CIR built in device???
If one of you had already solve this bug, please share it...
Thanks...
NB: sorry about my bad spelling english language

Quote from: Stu on 17-June-11, 01:35:02
What 'MCE Remote' are you using, and can you define 'doesn't work' more clearly?
ok, i can explain that. My friend had same notebook like mine. And he had a Microsoft remote control that work with his notebook. But it can't work on my notebook. I don't know about that remote's model/type/series, if that is what u ask. All i know is thats mce remote control.
but. . .looks like it doesn't matter anymore right now.
Ive got worse matter than this.
yesterday i use my notebook to copy some file to external hdd, than scan external hdd with avast antivirus. I take a cup of coffe and smoke while waiting avast finish it job. I forgot to attach ac adapter on it. When i came back, its already off with power led colour red, indicating that my notebook is low on power. So i charge it, then turn it on. I was surprised to know that my lcd not display anything. Blank without backlight. Every thing run like normal, just lcd not light up. And hdd activity indicator is blinking 3x per second...
can u help me Stu??

I updated my IPhone 3GS to the new 5.1 operating system and have since had a range of problems with not only my phone but also my IPad.

I updated my IPhone 3GS to the new 5.1 operating system and have since had a range of problems with not only my phone but also my IPad.
Programs (Safari, mail, messages) keep crashing, mail will not delete properly (some will keep popping into my inbox again for no reason!!!), slow, settings lock up etc. etc.
This only seemed to become an issue once I updated to ios 5.1 and funnily also affected my Ipad even though i hadn't updated the software yet. I have since updated the software on my ipad thinking it might help too but that only made things worse!! So I am not sure if it's an ICloud issue, but when i try to disable ICloud my devices lock up as well.
The battery life is also shocking!!
I have hard reset both devices, restored both devices, reset the setting and tried a whole host of other suggestions (like closing background programs) on this forum buit nothing works and i am tearing my hair out.
I looked in the phone and ipad log and there do seem to be low memory reports though i don't know why these are occuring now when they never have before??
I don't know if I can restore the old operating system (If I can please let me know how). The phone or ipad are not jailbroken.

but you should have a backup in itunes.
Every time you sync your iOS device iTunes creates a backup. go check if its there, iTunes Preferences >Devices. and there you should see if you have a backup, and in case from which date the backup is.
And ofcourse you can get your icloud data back by just logging in with your Appleid under icloud in settings on the iphone.
But anyway, if the iPhone works when you restor it as new: try adding your backup, and see if the issue comes back. And experiment with your backup and try to work out what is causing the issue, my guess is that its some app! Good Luck!

MIRO document Number range buffering problem

Dear all,
My MIRO document number is not following the sequence. if my first 5 numbers come in a sequence, then the next 5 numbers are not coming in between. Instead, the next 5 numbers are coming. It might be due to number range buffering problem. How to find the number range object for MIRO document number range?
How to solve this?
Please suggest.
I will award full points.
Thanks & Regards,
AR

Hii,
You can search the Number Range object in T-Code: SNRO
The Number Range object for Invoice document is RE_BELEG
Go the Change Mode of the Number Range Object in SNRO, remove the No of Numbers of Buffers (by default it will be 10).
This will resolve your issue.
Regards,
Kumar

HT1849 I have received notification that the "Complete My Album", Music Speaks by Candice Glover is now available to download. I have three devices that are all enabled to receive automatic downloads. My problem is the same on all three devices. Only

I have received notification that the "Complete My Album", Music Speaks by Candice Glover is now available to download. I have three devices that are all enabled to receive automatic downloads. My problem is the same on all three devices.
Only 0.05 minutes download on each song with the exception of the original song purchase: I Am Beautiful. What needs to be done to solve this problem?

It seems that I have solved my issue by performing a full factory reset (erasing all content, something which I had hoped to avoid) restoring from an iCloud backup did not alleviate the issue, I had to set up as a new iPad.
Hopefully anyone else else who has this issue in the future will be able to find this.

Font Availability/Possible Font Conflict Problem

I have InDesign CS3 on a Windows XP SP3 machine with the following problem: I have a document I am reprinting for one of my clients and it uses Helvetica Neue Condensed Bold font. It seems that this font comes into conflict, probably due to its name, with Helvetica Neue Bold. If I delete the latter from the Windows\Fonts folder, then in all other Windows programs, the Condensed Bold font shows up. However, *it does not* show up in InDesign CS3. Furthermore, the latter thinks it still has access to the Bold font even after it has been removed from the Windows\Fonts folder. I assume this may be due to InDesign CS3 accessing fonts from elsewhere, but there is nothing in the "Fonts" folder for the main InDesign program folder. I would be very happy is someone can tell me what exactly is causing this font conflict problem, and how I can work around it. But mainly, I need to know where InDesign informs the user about where it looks for fonts (I can't find anything like the specification in Distiller that restricts where it looks for Windows fonts). Any help would be *most* appreciated, as I need to get this out in the next two days and must leave town early Wednesday.

Fonts for Indesign can be stored in C:\Program Files\Adobe\Adobe InDesign CS3\Fonts and they will only be accessible by Indesign. I've had problems with different versions of Helvetica too, but only when they were from slightly different families, or a mixture of types. Now I've got the whole set it works fine, you may have to experiment with your mix of fonts. Bear in mind too that fonts display differently in the Indesign font list than they do in Word for example.

Possible conflict/problem if using edk 5.2.0 with plumtree portal 5-0-3 and collaboration v4.0.1?

Hi,
We are using plumtree portal v5-0-3 and collaboration v-4.0.1. I have to create a portlet where users can use it to submit a request for a collaboration project to be created. Searching through Plumtree Developer Center, there are documents that show me how to create a collaboration project using edk library. The edk that comes with plumtree portal v5-0-3 doesn't contain the api(s) that I need (for example, com.plumtree.remote.prc.collaboration.project.*). However, the edk 5.2.0 does contain these api(s).
Are there any possible conflicts/problems if I use the edk 5.2.0 with our existing plumtree portal v5-0-3 and collaboration v4.0.1? If there are, is there any other way that I could get to these api(s) somehow to create collaboration projects?
Thank you in advance for helping!

Thank you so much for responding so quickly!
Is there any api or way that I could use to create a collaboration project without using the Project Explorer? In our scenario, after a user uses the portlet that I describe earlier in the original disscussion message to request the creation of a project, an admin will take a look at the request and click a button to have the project created. This button will somehow trigger some scripts or codes instead of the admin using the Project Explorer to create the project.
Thanks again for your help!

SNRO - Creation of Number range object problem

Hi Experts,
i wanted to create a number range object thru SNRO.
The creation was successful in DEV system.
when i tried to create the same number range object in QA server, i am getting the following error
"Changes to Repository or cross-client Customizing are not permitted - Choose 'Display object' or 'Cancel'."
this is a Znumber range used to generate sequential numbers using FM NUMBER_GET_NEXT
What could be the problem. how to over come this?
Is it the missing authorizations? if so what could be the authorization object (SU53 shows nothing)
Appreciate any help in this regard.
Thanks
Simha

Hi All,
I am confused with the conflicting answers for my problem. But anyways i could transport the number range object and could create a number range interval in QAS.
Thanks a lot for all your valuable inputs.
But i am still not out of this so called misconception - Are number range objects to be transported to QA or to be created afresh in QA/PRD?
Earlier some one told to be created but now i see they can be transported.
I was not ready to edit the options in SCC4 for the client to enable object creation.
Thanks again,
Simha

Date range query problem in report

Hi all,
I have created a report based on query and i want to put date range selection but query giving problem.
If i am creating select list selection then it is working fine means it will display all records on the particular date.
But what i need is that user will enter date range as creation_date1,creation_date2 and query should return all the records between these date range. i want to pass it by creating items, i created two items and passing creation_date range to display all records but not displaying and if not passing date then should take null as default and display all records
Here is the query:
/* Formatted on 2006/12/10 20:01 (Formatter Plus v4.8.0) */
SELECT tsh."SR_HEADER_ID", tsh."SALES_DEPT_NUMBER", tsh."COUNTRY",
tsh."LOCAL_REPORT_NUMBER", tsh."ISSUE_DATE", tsh."SUBJECT",
tsh."MACHINE_SERIAL_NUMBER", tsh."MACHINE_TYPE", tsh."MACHINE_HOURS",
tsh."STATUS"
FROM "TRX_SR_HEADERS" tsh, "TRX_SR_PARTS" tsp
WHERE (tsh.status LIKE :p23_status_sp OR tsh.status IS NULL)
AND (tsh.machine_type LIKE :p23_machine_type_sp)
AND ( tsh.machine_serial_number LIKE
TO_CHAR (:p23_machine_serial_number_sp)
OR tsh.machine_serial_number IS NULL
AND ( TO_CHAR (tsh.failure_date, 'DD-MON-YY') LIKE
TO_CHAR (:p23_failure_date_sp)
OR TO_CHAR (tsh.failure_date, 'DD-MON-YY') IS NULL
AND ( TO_CHAR (tsh.creation_date, 'DD-MON-YY')
BETWEEN TO_CHAR (:p23_creation_date_sp)
AND TO_CHAR (:p23_creation_date_sp1)
OR TO_CHAR (tsh.creation_date, 'DD-MON-YY') IS NULL
AND (tsh.issue_date LIKE :p23_date_of_issue_sp OR tsh.issue_date IS NULL)
AND (tsh.country LIKE :p23_country_sp OR tsh.country IS NULL)
AND ( tsh.local_report_number LIKE TO_CHAR (:p23_local_rep_num_sp)
OR tsh.local_report_number IS NULL
AND ( tsp.part_number LIKE TO_CHAR (:p23_part_number_sp)
OR tsp.part_number IS NULL
AND tsh.machine_type IN (
SELECT DISTINCT machine_type
FROM trx_sales_dept_machine_list
WHERE sales_department_id IN (
SELECT DISTINCT sales_department_id
FROM trx_user_sales_department
WHERE UPPER (user_name) =
UPPER ('&APP_USER.'))
AND SYSDATE >= valid_from)
AND tsh.sr_header_id = tsp.sr_header_id
can any one tell me wat is wroung in this query.
Any other way to write this?
Thank You,
Amit

Hi User....
Here is some date range SQL that my teams uses with some success:
For date columns that do not contain NULL values, try this (note the TRUNC, it might help with your "today" problem).
The hard coded dates allow users to leave the FROM and TO dates blank and still get sensible results (ie a blank TO date field asks for all dates in the future.
AND TRUNC(DATE_IN_DATABASE)
BETWEEN
decode( :P1_DATE_FROM,
TO_DATE('01-JAN-1900'),
:P1_DATE_FROM)
AND
decode( :P1_DATE_TO,
TO_DATE('31-DEC-3000'),:
:P1_DATE_TO)
For date columns that contain NULL values, try this (a little bit trickier):
AND nvl(TRUNC(DATE_IN_DATABASE),
decode( :P1_DATE_FROM,
decode( :P1_DATE_TO,
TO_DATE('30-DEC-3000'),
NULL),
NULL)
BETWEEN
decode( :P1_DATE_FROM,
TO_DATE('01-JAN-1900'),
:P1_DATE_FROM)
AND
decode( :P1_DATE_TO,
TO_DATE('31-DEC-3000'),
:P1_DATE_TO)
Note the 30-DEC-3000 versus 31-DEC-3000. This trick returns the NULL dates when the FROM and TO date range items are both blank.
I hope this helps.
By the way, does anyone have a better way of doing this? The requirement is given a date column in a database and a FROM and a TO date item on a page,
find all of the dates in the database between the FROM and TO dates. If the FROM date is blank, assume the user want all dates in the past (excluding NULL dates). If the TO date is blank, assume that the user wants all of the dates in the future (excluding NULL dates). If both FROM and TO dates are blank, return all of the dates in the databse (including NULL dates).
Cheers,
Patrick

For all Enteries in & Ranges Performance Problem

Is there any soln of For all enteries in & Ranges as
If i use for all enteries in my report, it becomes slow .
and if i use Ranges , if no. of record exceeds system will throw dump.
Since long i couldnt find any good soln for this problem , can anyone guide me
how to solve this problem.
Thanks

Hi All
I am pasting down query for more expert optimzation comments of the current probs
SELECT zsd_weigh_bridg1~weight_no zsd_weigh_bridg1~challn_no
           likp~vbeln AS likp_vbeln likp~lfdat
           lips~vgbel
           vbfa~vbeln AS vbfa_vbeln vbfa~vbtyp_n
           mkpf~budat
*         vtfa~vbeln AS vtfa_vbeln
           ekko~knumv AS ekko_knumv
           ekpo~inco1 ekpo~werks
           APPENDING CORRESPONDING FIELDS OF TABLE lit_in
      FROM zsd_weigh_bridg1
           INNER JOIN likp ON likp~traid = zsd_weigh_bridg1~weight_no
           INNER JOIN lips ON lips~vbeln = likp~vbeln
           INNER JOIN vbfa ON vbfa~vbelv = likp~vbeln
           LEFT OUTER JOIN mkpf ON mkpf~mblnr = vbfa~vbeln
           LEFT OUTER JOIN vtfa ON vtfa~vbelv = vbfa~vbeln
           INNER JOIN ekko ON ekko~ebeln = lips~vgbel
           INNER JOIN ekpo ON ekpo~ebeln = ekko~ebeln
*           FOR ALL ENTRIES IN git_bridge
      WHERE zsd_weigh_bridg1~weight_no in r_weight." git_bridge-weight_no ." r_weight.
ENDIF.
lit_in_tmp[] = lit_in[].
DELETE lit_in_tmp WHERE vbtyp_n NE '8'.
IF lit_in_tmp[] IS NOT INITIAL.
    SELECT mandt knumv kposn vbeln netwr netpr INTO TABLE lit_vfsi
      FROM vfsi FOR ALL ENTRIES IN lit_in
     WHERE vbeln EQ lit_in-likp_vbeln.
    SELECT mandt tknum vbelv posnv vbtyp_v vbeln posnn vbtyp_n
           INTO TABLE lit_vtfa
      FROM vtfa FOR ALL ENTRIES IN lit_in
     WHERE vbelv EQ lit_in-vbfa_vbeln.
    IF lit_vtfa[] IS NOT INITIAL.
      SELECT mandt fknum fkpos knumv
        FROM vfkp INTO CORRESPONDING FIELDS OF TABLE lit_vfkp
             FOR ALL ENTRIES IN lit_vtfa
       WHERE fknum EQ lit_vtfa-vbeln.
    ENDIF.
ENDIF.

Receiver File Adapter Content Conversion Problem.

Hi All,
I am getting in receiver file adapter due to content conversion setting. Problem is that all the fields coming in file adapter are optional. In content conversion , i have specified fieldfixedlengths. So whenever any optional field is not present , it fails . How should we handle it? is there any option to declare fields as optional, I know that is the there for sender adapter. But no. of fields is also very large, so putting each and every field as optional is very time consuming.
What should i do?
Ranjeet Singh.

Hi Daniele,
Instead of using the standard funciton , i created a UDF for handling this situation.
My logic is UDF is like
   //write your code here
int Size = Integer.parseInt(Truncate_Size);
String Return_Value = "";
     if (!("".equals(Input)) )
          if (Input.length() > Size )
               Return_Value = Input.substring(0,Size);
          else
               Return_Value = Input.substring(0, Input.length());
     else
          for(int i = 0; i< Size ; i++)
          Return_Value = Return_Value + " " ;
return Return_Value;
SO in this case also , it should be able to handle empy source element. But it is not working.

Receiver HTTP Adaper Response Message problem

We are using HTTP adapter as the receiver for one of our vendor to post XML PO's to vendor's URL.
We are using Transport Protocol-HTTP 1.0
Message Protocol-XI Payload in HTTP Body
Adapter Engine-Integration Engine.
When PO is posted good on vendor's site we get "200" as the reponse message and when PO is failed in the vendor system due to mapping problems still we get "200" response message, Vendor's are sending "400" message for the failure to update their system but our server is not waiting to get "400" response messages. It picks the message of "200" when PO is posted on vendor's URL it is not waiting to get the next message.
Does anyone can help me to resolve this problem.
Thanks in advance!
Mrudula Patel

Hi Mrudula,
Can you eloborate bit more on this scenario,
1) 200 - for posting successfully in Vendor's site
2) 400 - if Business logic fails at Vendor's site
3) ?? - Sucessful transaction (Biz Logic).
If there is only one response, which gives either 2 or 3, then you can pick up the appropriate one & post the sender with the results. The HTTP adapter's call closes once it recieves ANY reponse from recieving site (Vendor).
hope this helps.
Regards
Vishnu

Entering dates into two cells and then receiving a corresponding range to be formatted

I am new to VBA. I am trying to set up a reservation system using Excel. The rows are the different rooms and the columns are the dates. The tutorial that I am using to set up this system didn't go far enough for my liking. Using
the current code it will find use the "start date" from the data entry cell and show the name in a calendar type data range. What I need to add is an "end date" which will then show all of the dates for that booking. I'm not
sure how to put that into the code that the tutorial already had. Here is that code. Any help would be greatly appreciated.
sincerely,
Andy
VBA Code:
Sub Bookings()
    Dim Rm As Range, Dt As Range, Myrng As Range, Sites As Range
    Dim endCol As Range, StCol As Range, StRow As Range, endRow As Range
    Dim Codei As Range, Col As Range
    Dim Dws As Worksheet, Cws As Worksheet
    Dim x As Integer
    Dim LastRow As Long
    Dim aCell As Range, bCell As Range, dCell As Range
    Set Cws = Sheet1
    Set Dws = Sheet2
    Set StCol = Cws.Range("I5")
    Set endCol = Cws.Range("K5")
    Set StRow = Cws.Range("M5")
    Set endRow = Cws.Range("O5")
    LastRow = Dws.Range("C" & Rows.Count).End(xlUp).Row
    Set Myrng = Dws.Range("C7:C" & LastRow)   'data sheet columns
    Cws.Range("G12:AH31").ClearContents
    Cws.Range("G12:AH31").Interior.ColorIndex = xlNone
        For x = StRow To endRow
        Set Sites = Cws.Cells(x, 6)
                For Each dCell In Cws.Range(Cells(x, StCol), Cells(x, endCol))
            If Not dCell Is Nothing Then
                Set Dt = Cells(11, dCell.Column)
                                Set aCell = Myrng.Find(What:=Sites, LookIn:=xlValues, _
                                       LookAt:=xlWhole, SearchOrder:=xlByRows,
SearchDirection:=xlNext, _
                                       MatchCase:=False, SearchFormat:=False)
                If Not aCell Is Nothing Then
                    Set bCell = aCell
                                        Do
                        Set aCell = Myrng.FindNext(After:=aCell)
                        If aCell.Offset(0, 1).Value = Dt.Value Then
                            Set Codei = aCell.Cells(1, 4)
                            Set Col = aCell.Cells(1, 3)
                            dCell.Value = Codei
                            Select Case Col
                                Case Cws.Range("AP9").Value
                                    dCell.Interior.ColorIndex = 27
                                Case Cws.Range("AP10").Value
                                    dCell.Interior.ColorIndex = 24
                                Case Cws.Range("AP11").Value
                                    dCell.Interior.ColorIndex = 4
                                Case Cws.Range("AP12").Value
                                    dCell.Interior.ColorIndex = 38
                            End Select
                        End If
                        If Not aCell Is Nothing Then
                            If aCell.Address = bCell.Address Then Exit Do
                        Else
                            Exit Do
                        End If
                    Loop
                End If
            End If
        Next dCell
    Next
    On Error GoTo 0
End Sub

Not sure how you derive Actual Cost numbers, etc. but you can use the INDEX MATCH combination to solve a problem like this.
INDEX looks up a value from a range given a row number and column number.
MATCH can get the row number and column number you need.
Putting it all together here:
The formula in G2 of 'Table 2':
=INDEX(Table A::$A:$G,MATCH(A2,Table A::$A,0),MATCH(G2,Table A::$1:$1,0)+2)
This looks more complicated than it is. Breaking it down:
   =MATCH(A2,Table A::$A,0) simply tells Numbers to take the value in A2 and find out where it occurs in Column A of 'Table A'.
   =MATCH(G2,Table A::$1:$1,0)+2 tells Numbers to take the value in G2 and find out where it occurs in Row 1 of 'Table A'. Then it adds 2 because the way you have the table set up you need to shift over two columns to get the actual cost after the 'Retro Deal'.
=INDEX(Table A::$A:$G, <first MATCH expression>,<second MATCH expression>) looks up the results in the whole of Table A (here columns A through G).
SG

RANGE + INTERVA + Null in range key problem

Hello All:
I have problem when A1 table has null value in Start_Date field or in the future when the user will not enter any value to Start_date field. It gave me error message "ORA-14400:
inserted partition key does not map to any partition". How can I solve null value in the partition range interval key.
CREATE TABLE A2
PARTITION BY RANGE (Start_Date) INTERVAL (NUMTOYMINTERVAL(1,'YEAR'))
( PARTITION ACTION1_OLDER VALUES LESS THAN (TO_DATE('01/01/2008','MM/DD/YYYY')) ,
PARTITION ACTION1_2008 VALUES LESS THAN (TO_DATE('01/01/2009','MM/DD/YYYY'))
PARALLEL NOLOGGING AS SELECT * FROM A1;
Thanks,
Mohammed Alsabie

"ORA-14400: inserted partition key does not map to any partition
Cause: An attempt was made to insert a record into, a Range or Composite Range object, with a concatenated partition key that is beyond the concatenated partition bound list of the last partition -OR- An attempt was made to insert a record into a List object with a partition key that did not match the literal values specified for any of the partitions.
Action: Do not insert the key. Or, add a partition capable of accepting the key, Or add values matching the key to a partition specification"
http://docs.oracle.com/cd/E11882_01/server.112/e17766/e12700.htm#sthref4775
Can't you possibly add a so called 'JUNK'-partition?
Or see/search: http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:1392403659992#1044263100346496877

Ene cir receiver I/O Range Conflict Problem

Similar Messages

Maybe you are looking for