Enemy Territory Quake Wars won't run because of video card/driver

I have installed Enemy Territory Quake Wars to my Tecra A9-51U and when it trys to load it comes up with the message:
"The current video card / driver combination does not support the necessary features: GL_ARB_texture_rectangle or GL_EXT_texture_rectangle GL_ARB_shader_objects GL_ARB_vertex_shader GL_ARB_fragment_shader"
I have tried to install new drivers from both intel an nvidia however they they dont work and say that the driver must come from toshiba however I can not find any!
Is there anything that I can do to resolve this or is there nothing that i can do to get it working!!?

Hi buddy,
why so nervous? I have here some nice sites which have really good drivers WHICH WORK ;)
Check these sites:
http://www.laptopvideo2go.com/ (read the FAQ section first)
http://www.omegadrivers.net/
download the drivers from there and play quake wars. Its a nice game, I am waiting for it since I ordered it and it should come next week.
Greets

Similar Messages

Enemy Territory: Quake Wars

I'm using Arch64 and really don't want to set up chroot. So If anyone has compiled wine with the two patched that are required for the ET:QW Beta, I'd really appreciate a copy.
Edit:
Never mind, I compiled it on a kubuntu livecd I had ling around, (not optimal but) it seems to work ok. If anyone else is interested you can grab the compiled and patched winex11.drv.so here, then you just need to replace /usr/lib/wine/winex11.drv.so
Edit two:
I've been playing it quite a bit and have to say, it's going to be one awesome game! Best FPS for a long time!!!
Last edited by N30N (2007-06-27 05:10:23)

mrjwalsh wrote:what setup you have N30N? I have 2x6800GT's in SLI. Is that enough to run Quake Wars?
I've only got one 6800GT oced and I can run 1600x1200 with quite a bit of tweaking. The internal game only runs at 30fps so it's not that hard to get a solid frame rate (and I know 30fps sounds crappy but it's really not as bad as it sounds). I do hope to upgrade my PC before it goes final so I can run with the gfx maxed out.
mrjwalsh wrote:By the way, you probably already have read but a native Linux version of the game will be out shortly after the Win one.
Yup, have had the game on preorder for so long I just had to try the beta and now I cant stop playing it (It's probably the best FPS I've played since Q3).

Enemy Territory:Quake Wars runs strangely slow

Hi!
I am not sure what kind of problem this is, my ETQW runs quite slow (i suppose 15-25 fps) although my hardware should be enough for it (3500+ and a GF8600GT). The strangest thing about it is that the game stays this way no matter if i play in 1024x768 high details or 800x600 lowest detail. It is just slow (when i make fast turnarounds or when i am inside buildings - for example). I have a manually compiled kernel with all these "speed tweaks" found here http://www.linux.com/articles/118524 (1000Hz Timer etc) and pretty much all drivers i don't need put out. So what can be the problem? I have not tried it in WinXP (simply because i don't own a copy...)
Ah, almost forgot it: The fps raises when i play alone or with only 1-2 Bots...And i can even play 1280x1024 smoothly with only 3-4 players on the server...so...what can i do about this? Do i need a new CPU?
Last edited by haukew (2007-11-02 19:03:37)

haukew wrote:Hi!
I am not sure what kind of problem this is, my ETQW runs quite slow (i suppose 15-25 fps) although my hardware should be enough for it (3500+ and a GF8600GT). The strangest thing about it is that the game stays this way no matter if i play in 1024x768 high details or 800x600 lowest detail. It is just slow (when i make fast turnarounds or when i am inside buildings - for example). I have a manually compiled kernel with all these "speed tweaks" found here http://www.linux.com/articles/118524 (1000Hz Timer etc) and pretty much all drivers i don't need put out. So what can be the problem? I have not tried it in WinXP (simply because i don't own a copy...)
Ah, almost forgot it: The fps raises when i play alone or with only 1-2 Bots...And i can even play 1280x1024 smoothly with only 3-4 players on the server...so...what can i do about this? Do i need a new CPU?
I remember there were issues like this on the ETQW community forums. Maybe the following?
http://community.enemyterritory.com/for … stcount=67
I never had this problem, just a little mic drama. The forums there have a lot of people having performance issues with good hardware on both Linux and Windows. The fix is pretty minor.

I have Mac0s x10.4.11 with itune 9, I have purchased apple tv and it won't run because i need itunes 10.2 can anyone suggest a solution

I have Mac0s x10.4.11 with itune 9, I have purchased apple tv and it won't run because i need itunes 10.2 can anyone suggest a solution

Upgrade to Leopard. Better yet, Snow Leopard if your Mac is an Intel model (you don't say much about the computer which makes this hard to make suggestions).

IMovie 8.0.6 came installed on my computer. I'm trying to upgrade but imovie11 won't work because the sound card is incapitable. What do I do?

iMovie 8.0.6 came installed on my Mac OS. I want to upgrade it but when I try to buy imovie 11 it won't work because my sound card isn't capatible. What do I need to do to upgrade my imovie application?

Try the iLife for desktop/laptop forum:
https://discussions.apple.com/community/ilife/imovie?view=discussions
This forum here is for for iOS Apps that run on iPad/iPhone.

How to run 300w of video cards with precision tower 5810 685W power supply?

I have a precision tower 5810 with 685W power supply. In the Tech Specs it says.
Support for two PCI Express® x16 Gen 2 or Gen 3 graphics cards up to 300W (total graphics in two slots with 685W PSU)
So you should be able to run two 150w video cards but 150w video cards all seem to need two 6pin power connecters each for a total of four 6pin power connecters for two cards. But my 5810 only has two 6pin connecters. And I can't find anywhere to plug in more.

150W cards have 1 pci-e connector, 75W comes from the X16 slot and 75W comes from 1 PCI-E connector.
225W cards need 2 which gives 150W from PCI-E power and 75W from the X16 slots.
You cant use 2X 225W card.

PE 13 crashes due to incompatible video driver detected. Running on Win 7 SP1 with ATI 540v video card/driver. Deleting bad driver file in adobe program data does not fix the problem, it simply replaces the text file and crashes again. My video driver

PE 13 crashes due to incompatible video driver detected. Running on Win 7 SP1 with ATI 540v video card/driver. Deleting bad driver file in adobe program data does not fix the problem, it simply replaces the text file and crashes again. My video driver is just fine. Any help out there?

rb
Your video card driver may be fine for something, but just not compatible with Premiere Elements 13/13.1.
For those with the display card error, the answers include
a. assure your video card/graphics card driver version is up to date according to the web site of the manufacturer of the card -
if necessary consider a driver roll back.
b. determine in Device Manager/Display Adapters if the computer is using 2 cards instead of 1
c. delete the BadDrivers.txt file
the rationale for that deletion is found in post 10 of the following older post...principle applies to 13 as well as 9.
Re: Premiere Elements 9 Tryout Serious Display Problem
Have you looked for computer ATI card settings that might be more compatible with Premiere Elements 13/13.1?
When is the program crashing - just opening a new project or rather crashing if editing a particular video format at the Timeline level?
ATR

My Adobe Bridge won't run because power pc isn't supported any more, is there away to still get it to run?

I have a 2010 mac book pro, software os x 10.9.5 and my adobe bridge won't run any more because power pc isn't used with this os x update is there any way to still use adobe bridge. My adobe bridge was part of a creative suite 6 package that I purchased in 2012.

I have a 2010 mac book pro, software os x 10.9.5 and my adobe bridge won't run any more because power pc isn't used with this os x update is there any way to still use adobe bridge. My adobe bridge was part of a creative suite 6 package that I purchased in 2012.

Firefox won't run because it 'is already running' I have tried all steps in firefox crashes articles

I had a spectacular crash in Firefox (FF) - Malware or a virus - I think my system is clean now.
I removed FF and all FF/Mozilla files, downloaded a new FF. It will not run because:
"Close Firefox
A copy of Firefox is already open. Only one copy of Firefox can be open at a time"
I have tried all the remedies on the 'FF crashes' support page. The profile manager doesn't run probably because that was among the files I deleted.
All other apps seem to run fine.

Start with item #2
#close Firefox with File > Exit or "Firefox" button > Exit. Give Firefox some time to close and
#check that it finished via Windows 7 shortcut to WTM "Ctrl+Shift+Esc" in the "Processes" tab make sure that firefox.exe is no longer running -- if it is still running then terminate it by selecting the use "End Process" button or from context menu.
#proceed with the install

Itunes won't run because of some problem with my audio configuration? help!

it specifically says "itunes cannot run because it has detected a problem with your audio configuration". anybody know how to fix that. all i did was when my itunes was werking perfectly fine i was uploading some videos onto it but wen i did it was freezing so i did it again and it froze again so i deleted itunes and installed it again. thats when the problem happened. i tried installing quicktime again. that didn't work then i organized my music and video files but it still wouldn't work. my speakers work good. id on't know what the problem is. CAN ANYBODY HELP????!!!!

Perhaps this Apple KnowledgeBase article will help:
iTunes 7 for Windows: iTunes had detected an audio configuration problem
Good luck.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

Itunes 7.5 won't run because QuickTime 7.3 is broken

During installation of itunes you will get an error saying "Itunes cannot run because some of it's required files are missing. Please reinstall iTunes". The reason is because QuickTime 7.3 is broken. You can check by opening QTInfo.exe in the quicktime folder and it will say QuickTime is not installed. What you can do is downgrade to QuickTime 7.2. Get it at http://www.apple.com/support/downloads/quicktime72forwindows.html. iTunes 7.5 will run fine with it.

Hi,
Thank you. Had to perform the following steps 'IN ORDER' to get 7.5 to work. Formerly was running iTunes 7.3.1 'without' incident.
1) Install iTunes 7.5. Quick Time 7.3 installs at same time. When error message occurs, click OK and finish installation.
2) Go to 'control panel' and remove 'Quick Time 7.3'
3) Install Quick Time '7.2.
4) Re-boot system and launch iTunes 7.5. How 'bout that. It works !!
Best Regards, DE

My itunes won't run because it says it needs apple applications support

After i downloaded itunes it says that it can't run because it can't find apple applications support for itunes set up i think?

Hello 14abes00
I would completely remove iTunes and other Apple software then install iTunes again. The articles below will assist depending on what version of Windows you have for your computer.
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Aperture Won't Launch With 2 Video Cards

I use 3 monitors with my G5 Dual 2.5GHz for running a number of programs simultaneously and also for Final Cut Pro editing. In the center is an Apple 23" HD Cinema Display. On the left is an Apple 15" DVI flat screen and on the right is an Apple 15" VGA flat screen.
Aperture will not launch at all. It gives me an error stating that the video card is not supported. The main card is a GeForce 6800 GT DDR that has the 23" and the 15" DVI connected. The problem is the Radeon 7000 that has the 15" VGA hooked up. I took the Radeon out and Aperture ran fine so I know where the problem lies.
Obviously I cannot keep taking the Radeon in an out of the G5 whenever I want to use different programs. Does anyone have any suggestions? I hope Apple will have an update where you can tell Aperture what monitors to use or video card to ignore. That should alleviate the problem. Is there a way of using Terminal to turn off the Radeon which would allow Aperture to run? I just bought this program and was all excited to start using it. Now I'm bummed. Any help is greatly appreciated.
Thanks,
Power Mac G5 Dual 2.5GHz Mac OS X (10.4.7)

Maybe there is a way to turn the Radeon 7000 on and off through Terminal? Some process I can quit to run Aperture on the 2 monitors connected to the nVidia GeForce 6800GT and then restart that process when I'm done so I can go back to using 3 monitors?
Thanks.
Power Mac G5 Dual 2.5GHz Mac OS X (10.4.7)

X58 PRO won't boot (memory or video card issue???)

Hi all,
this is my first message here.
I have recently bought a X58 PRO motherboard to which I have connected the following devices: one HD, one DVD, the CPU (i7 950), one Video Card (GeForce 6600 pci-express) and three DDR3 modules from Corsair (named CMT6GX3M3A2000C8). According to Corsair website the modules CMT6GX3M3A2000C8 run on thie X58 PRO.
I have turned on the system, but the screen remains black and the motherboard issues an intermittent buzz sound.
Besides:
The led close to the pci-express (where the video card is connected) is on.
The 5 CPU leds are all turned on.
The led close to the memory socket is off.
As far as I know, usually the intermittent buzz means that the motherboard doesn't recognize either the RAM or the video card, but I don't know if the buzz is different case by case (can be buzz be different according to the issue?) and in the manual I didn't find a troubleshotting chapter.
Is there a way which allow me to better identify where the issue would be (in memory or in Video Card... or something else)?
I have not tested neither the memory nor the video card on another system, thus I don't know if one of them is faulty.
Can anyone please help me?
many thanks in advance!
Lorenzo

Quote from: Bernhard on 27-April-11, 16:06:04
Do a CMOS clear>>Clear CMOS Guide<<
Only insert one mem module. Check all your power connections to the board/s again that they are secure. You may want to reseat your CPU and check carefully that all the contact pads on the CPU do have imprints.
Ok, I'll try it this evening!
In the meanwhile, I thank you.

OS 9 won't respond after installing video card

I haven't found this question on here. Well, not quite anyway. I've been running a B&W G3 with a partitioned drive for years. The partitions are: OS 10.4.9; OS 10.3.9; and OS 9.2.2.
I just bought and installed an ATI 9200 video card. It works great in both OSX partitions; but not in OS 9.
The mouse will let me move the cursor; but I can't click anything.
I've tried: resetting pram, repairing the drive from OSX, and booting from a cd and repairing the drive.
What else can I do besides reinstalling OS 9?

Use Apple Menu > Control Panels > Extensions Manager ...
.. to find it and uncheck it.
When you close the Extensions Manager window the extensions you de-selected will be moved to the Extensions (Disabled ) folder. At next Startup, they will not be loaded.
If you ever need them again, Extensions Manager can put them back into the Extensions folder when you check their checkboxes and a Restart will make them active again.

Enemy Territory Quake Wars won't run because of video card/driver

Similar Messages

Maybe you are looking for