Energy Profiler Error - All measurements not possi...

I have a 5800 XPM - I have energy profiler installed. have used the programme reasonably sucessfully until now. Every time I start it a message comes up "All measurements are not possible, Channel is reserved by another application".
I have not other apps running and I have restarted the phone.
Cannot figure out why this is happening, but it renders the energy profiler useless.
I was hoping to use it to find out why my battery life is so poor.
Anyone else having the same problem and how can it be fixed???

I think i did hear somewhere, that after installation of Nokia Battery Monitor the Energy-Profiler does not work any more.
Did you install Battery Monitor?
If yes... switch it of,.... reboot... maybe you have to even de-install the Battery Monitor...

Similar Messages

  • Nokia Energy Profiler 1.23 will not install

    Hi All,
    I've been trying to  install the Nokia Energy Profiler V1.23 but keep getting "Update Error" - any idea on how to get this to work, or is there a better option for displaying things like Cell ID info, signal strength etc?
    Thanks,
    Stevem1

    Hi cjlim, I downloaded the file from OVI store and have downloaded it a couple of extra times, all with the same result. I followed your link and had to register as a different person as my Nokia pwd didn't work. Once logged on I've downloaded the file, reinstalled it but still comes up with "Update Error"!
    Thanks,
    Stevem1

  • Copying is not poss.because an entry is missing in Table TVCPL: AF

    Good night,
    When Create outbound delivery with order reference, got an error :
    Copying is not poss.because an entry is missing in Table TVCPL: AF
    Message no. VL473
    go to t-code :VTLA
    want to create target delivery for AF but no selection for AF.
    Order transaction using TAV.
    Guru, guide me please.
    Thank you,

    Hi
    You have to create teh copy control from order to delivery process in VTLA
    You can copy the s tandard one OR to LF and then create copy control for   your new document  types.
    You have to configure at the header and item levels in this tcode. For detailed information, you can put F1 in each field and find out the purpose of each field.
    Reward if this helps.

  • Copying is not poss.because an entry is missing in Table TVCPL: ZOV2 ZDV2

    Hi,
    I created  sales order and delivery for consignment purpose and for return it I create return sales order again, but at the time delivery creation the system shows me the error:
    "Copying is not poss.because an entry is missing in Table TVCPL: ZOV2 ZDV2"  Message no. VL473
    I checked VTLA and copy sales order type to delivery type with following data:
    Order requirements: 001
    Combination requirement : 051
    Header data: 001
    and copy item category REN as follow:
    order requirements: 101
    Item data: 101
    business data : 2
    but problem still remained. So I want to know how I can fix this error message?

    Dear,
    Table TVCPL is the table which is used for copy control so the error says maintain it properly and as per message
    there is error of Copy control Between Document ZOV2 to ZDV2 so I would suggest following step,
    1)Check the Item Cat.(REN) is define for delivery (ZDV2) check it out if Item Cat. (REN) determination is done in Delivery
       That is the only thing which will be missing, if stil problem exist then
    2) Do set Copy Control altogether again just copy it between RE TO LR and rename as ZOV2 and ZDV2 and retry ur process.
    AND IF U ARE DOING CONSIGNMENT PROCESS THEN LET ME KNOW AS IT REQUIRE DIFFERENT SETTING.
    Regards
    AJIT K SINGH
    HAPPY TO HELP U

  • Energy Profiler- Not doing some measurements- Chan...

    I am using Nokia 5233 . I have installed this Application. Earlier i am using Nokia Energy Profiler. But after installing Nokia Battery Monitor. Some modules of Energy Profiler not working properly. An Error Message Flashes while using Energy Profiler "All Measurements are not possible. Channel is reserve by Another Application". This occurs when i press start in Energy Profiler Application. Due to this i can't measure Signal Strength of my Operator.
    Now i have Uninstalled Battery Monitor & this Energy Profiler Application then switched off phone.Then reinstalled Energy Profiler Application.But problem remains the same.. Can any one suggest solution???

    Hi, 
    Well, it seems that it is possible to fix it, I was also annoyed about  this conflict between Energy Profiler and Nokia Battery Monitor apps. Basically Nokia battery monitor installs 2 additional apps, the NBM installer and NBM service, that actually runs even if Nokia Battery monitor is un-installed. As the NBM service reserves the measurements channels, Energy profile cannot access handset resources. You have to un-install also NBM installer and NBM service from Application manager, and afterwards Energy profiler re-gains entire functionality. I did and works 100%.
    Another solution would be to stop NBM service temporary when EP desired to be used, not very friendly solution, but not impossible. 
    Good luck.

  • Firefox won't open, error msg = can't find profile; deleted all app.data to rid new Win 7 Total Security virus - tried both v 4.0 & v 3.6 (now no error msg either). Can't open profile manager, can't open safe mode. pls help

    My mother's computer was infected with the new "Win 7 Total Security" virus (apparently a fake antivirus program) - corrupted real av. To remove, we followed online advice to delete everything in AppData, for all programs, plus some other stuff. We moved it all to a flashdrive for safety, but after successfully removing virus, likewise cleaned & reformatted flashdrive. This apparently deleted Firefox profile(s), and after uninstalling & reinstalling, Firefox still won't open - I can't create a new profile. With v 4.0, I get an error message about not being able to find the profile. Found advice on how to open profile manager, but it won't open. Found reference to version 4 dispensing with profile manager, so tried installing version 3.6 again; still won't open, still can't open profile manager, but now no error message at all.

    THANX for the reply cor-el. I've never had a problem using just "firefox -p", but i did use the full path like you advised after i read the profile manager article here before i posted my question. Unfortunately it didn't work. I've backed up all 3 profiles from the "%appdata% profile" file, and also from my remaining main profile that i'm on right now. I decided i'm going to uninstall ff3.6.28 & upgrade to "firefox 11" this weekend and hopefully create the other 2 profiles along with my main one. I do like in the newer versions of FF the tabs on top like googles chrome because it gives you more room on the page. I also like some other features too, but the main reason i kept my old version both times is because the newer versions didn't seem to load pages any faster than version 3.6.28. I'm not going to worry about some themes/personas not being compatible with ff11. I'll find some new ones. I think when i tried "ff9" awhile back along with my current version, i just deleted the shortcut that the article said to create on the desktop and still had all 3 profiles & no problems like i have now. In case your curious, the article on how to create more than one version of firefox at the same time was on the site "Dottech.org>[How To] Tip: Install multiple versions of Firefox to test before upgrading to latest release". It works but i obviously did something different this time that caused this problem. THANX again for your time/help, i do appreciate it.

  • Error  while creating PO --   Unit of measure not defined for lanuage  ZH

    Hi all,
    i  have created the PR with EA as UOM. Then while creating PO, i am getting error like
    '  Unit of measure not defined for lanuage ZH' .
    Then  I execute CUNI
    Then menu is GOTO > Translation > units of measure
    enter source language and target language . After this i am getting the below message
    --->  Language not available on server
    Please suggest what i should do. Thanks.
    Thanks
    pabi

    HI Pabi,
    Go to material master for material in purchase requisition, the Go to Additional data and maintained language as ZH in material master data.
    Also the other possibility, that if in your case purchase requisition are converted to purchase orders through background jobs,
    then check the background job execution in SM37 whether that background job has been triggered twice parellely in the background, which could have resulted in locking of same purchase requisition at same time and hence your are getting the Error.
    Br,
    Tushar

  • ESS Business Package Error: Period type not allowed for profile ESS

    Hi,
    We are trying to configure the business package for Employee Self Service on Enterprise Portal 6.0. We followed this SDN contribution <a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a">ESS doc guide</a>
    So far we have successfully deployed the business packages and followed all the configurations that were pointed out in the doc guide. Unfortunately when we try to access the Employee Self-Service portal pages (Overview, Employee Search, etc), we encounter this error:
    Critical Error:
    Period type not allowed for profile ESS, error key: RFC_ERROR_SYSTEM_FAILURE
    com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException:      Period type not allowed for profile ESS, error key: RFC_ERROR_SYSTEM_FAILURE
    Any ideas on how to fix this issue?
    Regards,
    Jojo

    Hi Jojo,
    Have you solved the problem? If yes can you please help me even I am facing the same error.
    this is very help full to me .
    Thanks and Regards,
    Shilpi.

  • Energy Profiler measurement units

    Here's one that's got me flummoxed. Until yesterday, Energy Profiler would measure power consumption in watts. I'm not aware of having done anything in particular, but as of yesterday it started using amps as the vertical unit instead of watts.
    Does anyone know what I did to effect this change and how I can get it back to watts?
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!
    Solved!
    Go to Solution.

    Hi everybody,
    I am trying to establish which tool(Energy profiler, Performance investigator) is better to estimate power consumption in nokia n95, right now I have the next problem:
    I have mapped the measures(5 mins) for both tools, the behavior between graphics seems almost equal, but the values are completly different. I mean: With Performance Investigator the values are around 8 times bigger than energy profiler values.
    The average related to power for both tool, under equal conditions is:
    Energy profiler: 0,08W
    Performace Investigator: 0,7W
    I tried the same procedure with an interval of 10mins and the result are almost the same.
    Does someone know what is happening?.
    Thanks in advance.

  • Error:Measures not defined.

    <p>Hi All-</p><p> </p><p>I am using EIS to build the Outline,but when I try to save theMetaoutline I get an Error message as</p><p><b>MEASURES NOT DEFINED.(I also get a message as you can stillsave the Outline but cannot do a member or a data load)</b></p><p> </p><p>I have these dimensions in my Metaoutline:</p><p>Measure : Accounts - Dense</p><p>Period:Time - Dense</p><p>Scenario - Dense</p><p>Company - Sparse</p><p>Type - Sparse</p><p> </p><p>Please help to overcome this error.</p><p> </p><p>thanks in advance.</p><p> </p><p>Jeeva</p>

    <p>Thanks for the reply,but if I go back to my OLAP model to changethe Measure dimension as Accont dimension,when I go to theProperties of Measure Dimension the Dimension Type field where wedefine the dimension as Account is GRAYED out and has GENERAL init.I cant modify it.What do I do.......?Please help.</p><p> </p><p>thanks,</p><p>jeeva</p>

  • Getting "Could not complete your request" error all the time

    Whenever I try to do anything in Fireworks CS6 (CC desktop version) I get the error message "Could not complete your request. An error occurred".  The only exception is when I try to preview an image I get "Could not render the database. An error occurred"
    This literally happens with any action, from opening a file to changing any attribute of an object (e.g. colour, position, size).  Try to draw a new object - same error.  Delete one - same error.
    Weirdly it does seem to complete the action after I "Ok" the error message.
    Any ideas? 
    I am running this on Mac OSX 10.9.1 on a pretty new MacBook Pro.  I've checked for updates and I'm running the latest version.  (I'm running the trial version, as I am trying to decide whether or not to switch over to CC from my desktop apps, but I would hope it is the same as the full commercial version)

    For me the Fireworks stopped when it got to "Intializing Tab Windows", then a crashed and  displayed "Could not complete your request. an error occurred" and would never load. Basically dead. I couldn't use it at all. My whole workfow came to a stand still.Fireworks-Error.jpg
    BACKGROUND
    Just before this happened, I was trying a new feature from within Dreamweaver. While inside Dreamweaver, I could double-click an image file and it opened in my Fireworks to be edited. I thought . . . Wow, this is really cool. I edited that image and closed it and continued on my work. Since then, that "Connection" between applications has become permanent. Fireworks "THINKS" it is still connected to Dreamweaver. Later Fireworks would NOT open/load at. I would always get the above error.
    PARTIAL SOLUTION
    BTW: I had to do this twice, because the first time, I missed a file somewhere.
    I had to completely uninstall all ADOBE applications. I mean everything! I had CS3 & CS4 and Adobe Readers on my system.
    Since I'm on the mac, I went through the "Application Support" both user and system and the "Preferences" for both user and system and deleted everything that had either "adobe" or "macromedia" in it. There was also a file in the "Launch Agent & Daemons".
    I emptied the trash and did a power off restart. Then I reinstalled CS6. Now Fireworks at least loads and I can use it again, but it still isn't the same.
    OBSERVATION
    Fireworks and Dreamweaver are still "Connected". It won't save an existing PNG file as itself, it displays an error, "That file is open in another application", which is NOT true. I have to use the "Save As" option, and use the Finder to rename that file. I also notice an extra file labeled ex:0000056 which looks like the file I tried to save.
    So at least I can use my Fireworks again although it is irritating. I don't know how to "CUT" the connection between applications. Uninstalling & reinstalling did NOT reset this, the only option left would be a backup, wipe and fresh install of my entire laptop. I just don't have time to do that right now. Hope that helps someone else.
    Arlene

  • I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC.  I'm registered and my itunes account/ appleID are all correct and working.

    I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC.  I'm registered and my itunes account/ appleID are all correct and working.

    The ""not recognized for on-line use". error is associated with the Gracenote service that iTunes uses to look up and retrieve metadata for CDs.  Some users have reported that this error occurs when trying to import from CD, subsequent to upgrading to version 12.  A number of slightly different solutions have been reported (though all of a similar nature).
    Try walking through the following steps - before starting you may have to enable hidden files and folders to be viewed - in Windows 7 / Windows Explorer select Organize > Folder and search options, then on the View tab make sure that Show hidden files, folders and drives is selected.  Without this you won't see the AppData folder in C:\Users\username\
    Exit iTunes
    In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
    Delete the following files:
    CD Info.cidb
    com.apple.iTunes.Gracenote.plist
    Restart iTunes
    Insert a CD and see if details are now correctly retrieved from Gracenote
    If this doesn't work:
    In iTunes, select Edit > Preferences and make a note (or take a screenshot) of your preferences settings in all relevant tabs
    Exit iTunes
    In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
    Delete the following file:iTunesPrefs.xml
    Restart iTunes
    Insert a CD and see if details are now correctly retrieved from Gracenote
    If this second procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1.
    If this one didn't work:
    Exit iTunes
    Check the following folders:
    C:\Users\username\AppData\Local\Apple Computer\iTunes
    C:\Users\username\AppData\LocalLow\Apple Computer\iTunes
    Delete any copies of the following files:
    CD Info.cidb
    com.apple.iTunes.Gracenote.plist
    iTunesPrefs.xml
    Restart iTunes
    Insert a CD and see if details are now correctly retrieved from Gracenote
    Again, if this procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1 of the second procedure. If you're still not able to retrieve CD info:
    Exit iTunes
    In Windows, select Start > Control Panel > Programs and Features.  Find the entry for iTunes, right-click and select Repair.
    When this process has finished, restart iTunes
    Insert a CD and see if details are now correctly retrieved from Gracenote
    If none of these have worked (and almost everything I've seen suggests you should be OK by this point), you may have an issue with the installation and configuration of iTunes itself.  If you have got this far, see turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for advice on how to remove and replace of all components of iTunes.

  • I have the following problem: i lost my cs6 Adobe Production Premium installer dvds and the serials within the package, after all i logged here into adobe and cant find any product in my profile, so i am not able to see my serials or my installations i ha

    i have the following problem: i lost my cs6 Adobe Production Premium installer dvds and the serials within the package, after all i logged here into adobe and cant find any product in my profile, so i am not able to see my serials or my installations i have on my macbookpro. Can you help me to find out where i am registerd?

    If your registrations do not show at https://www.adobe.com/account.html you will not get help in an open forum
    You MAY get help at Contact Customer Care
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • Help! I restored my iphone recently and put all my music back onto my phone that day and it was fine but last night i was putting someother music on got an error music on. I got an error message about not being able to sync and now ALL my music has GONE.

    ahh! .I restored my iphone recently and put all my music back onto my phone that day and it was fine but last night i was putting someother music on got an error music on. I got an error message about not being able to sync and now ALL my music has GONE. deos anyone know why this would have happened?

    Click: Restoring your iTunes Library backup (from an external drive) here >  iTunes: Back up your iTunes library by copying to an external hard drive
    BTW, if you are a resident of the U.S, have iTunes 10.3 or later, and iOS 4.3.3, you can re download your iTunes purchases for free.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Error: Lock profile for approval procedure not maintained in Customizing

    Hi,
    We are working on the CHARM approval process. I have noticed that without selecting an approval procedure, I select the status (Awaiting business approval) on which the approval workflow is triggered, the system gives below error:
    Select an approval procedure first
    Lock profile for approval procedure not maintained in Customizing
    Approval procedure and approval steps are locked automatically
    This locks the approval procedure and the RFC can no longer be processed further. Why is that happening ? Anyone can select the status by mistake and lose the RFC, is there a way to stop this or at least reset it ? the lock procedure is already maintained in approval procedure customizing.
    Best Regards.

    Hi Karthik,
    Thanks for the quick reply, however the settings mentioned on page 38 are already in place i.e. the approval procedure gets determined correctly based on change category (rule policy) and also is locked after putting it to 'Awaiting Approval' 
    But the problem exists - setting the status 'Awaiting App.' without selecting app.proc, will result in a total lock of the RFC.

Maybe you are looking for