"Energy Saver" not turning off my screen...

I just got the new Nano and noticed that my screen doesn't fully turn off when I'm not using any controls like it's suppose to when using the "Energy Saver" feature. I would like my battery to last longer like the feature says but its not doing what it suppose to. What should I do?

The power drain of the LCD by itself is minimal. The backlight is where most of the power use comes in (well, that and the processor that decodes the music). I believe it also takes more power to "energize" the LCD over and over than it does to leave it on for a minute in the event you come right back to it (say you change songs after 20s or so).
Message was edited by: Xian Rinpoche

Similar Messages

Making mobiledevices not turning off the screen

Hi, is there anyway to force a mobile device to not turn off its screen when it doesn't recieve user input?
I've tried to google abit but I really lacked the english words for this I guess ;)
To make it a bit clearer. I've made a couple of midlets that don't take userinput all the time, and what happens is that after a few secs the device turns off the screen, so I have to sit there and press some random button all the time. A bit useless because this one midlet is just streaming graphics through bluetooth.
cheers,
Stian

i haven't tried it, but if i were to give an idea, I'd say setting a new "display" might be one thing that a phone might use to "wakup" the display. So maybe you can continually set a new display, using the current display.
so try something like this in your midlet:
/** partial midlet implementation below **/
private TimerTask refreshTask;
public void startApp() {
    // set up display
    // set something as your displayable, etc.
    // create a task that refreshes the display of the midlet
    refreshTask = new TimerTask() {
        public void run() {
            myDisplay.setCurrent(display.getCurrent());
    // set the task to run in 2 seconds, and run again every 2 seconds after that
    new Timer().schedule(refreshTask, 2000, 2000);
public void destroyApp(boolean b) {
    // cancel the task so it stops refreshing
    refreshTask.cancel();
/** end pseudo midlet **/so that's just my first idea of something to try, let me know it it works, and of course, tweak the 2000 (2 seconds) to whatever you need on that phone to keep the display awake.

Ipod touch will not turn off, frozen

ipod touch will not turn off.. screen frozen on fb..help pleaseeeeeeeeeeee!!!

See Here for Frozen or unresponsive iPod touch
Try this First... No Data will be Lost...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

Turn off the screen saver is greyed out in Presentation Settings

Hi,
We are using Windows 7, and want to allow laptop users the ability to "turn off the screen saver" when they are running presentations. However, this option is greyed out and the box is not selectable.
We have the usual screen saver group policies, i.e. enable screen saver, Prevent changing the screen saver, screen saver timeout, and force specific screen saver. I have tried to Disable all these apart from Enable screen saver, since if I disable this then
it says users cannot change screen saver options, so I left this one as enabled.
However, the "Turn off the screen saver" box is still greyed out. Does anyone know which group policy setting will enable this option?
Also, is there a way to keep the screen saver settings and also be able to use Presentation Settings, so that the screen saver does not come on and lock the machine in mid presentation?
I've seen some sites mention utilities that run in the background and simulate mouse clicks, but we're not allowed to run these kind of utilities, and no forums seem to be able to provide an answer to this problem.
Thxs.
Jaz

Hi,
>>i.e. enable screen saver, Prevent changing the screen saver, screen saver timeout, and force specific screen saver. I have tried to Disable all these apart from
Enable screen saver,
Before going further, please make sure that the group policy settings were applied correctly. We can run cmd command
gpresult/v or gpresult/z on clients to collect group policy to check this.
Besides, if the issue persists, we can try setting all these settings to
Not Configured.
>>Also, is there a way to keep the screen saver settings and also be able to use Presentation Settings, so that the screen saver does not come on and lock the machine
in mid presentation?
Based on the description, it is not easy to do this. However, we can reduce the effect of screen saver by choosing to not enable
Password protect the screen saver, and not set the setting
On resume, display logon screen on Screen Saver Settings dialogue box. Besides, we need to not let our power plan settings lock out the computer within a short time.
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen

HT201210 i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow undernieth and what looks like the charger lead. i've had it on charge! is there anything else i can do?

i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow underneath and what looks like the charger lead. i've had it on charge! is there anything else i can do?

Cconnect it to your computer with the latest version of iTunes installed.

My iPhone is fully charged and just gives me a blank screen and will not turn off, what do I do?

my iPhone is fully charged and just gives me a blank screen and will not turn off, what do I do?

Reset the phone like the manual says: hold the on/off switch and the home button simultaneously until the Apple logo appears. May take up to 30 sec

Ipod nano white screen and not turning off

hi I bought a new mini pioneer stereo/dvd and put my ipod nano on it yesterday.. no probs it played.... but today i put it on the dock and all that it showed on the screen was a white screen with "ok to disconnect" on it... I took it off and now it is still a white screen adn flashing "Do not disconnect" I'm freaking out because I am not technically minded and my brother spent hours putting music on it for me
It is not turning off at all
eek
Thanks to anyone with time to help me

Hi
It seems to be ok now... I had to go out and it ran out of battery, when I switched it back on it appears to be fine.
If it happens again (hoping that it doesn't!) and i do the reset.. will that remove all the music that's on there?
Sorry for the ignorance
Thank you for the answer

Screen does not turn off near my ear

The screen backlight does not turn off when you place it near your ear. Anyone else have this problem?

What I found, especially with my Boxwave case (that iLounge didn't give high marks for), was that if you hold the earhole up directly to your ear, the screen does turn off.
I checked and rechecked it in the mirror, and if I deviate a few cm higher or lower, then no, it won't. But if it's right up to my ear, then it does.
By the way, I love the Boxwave case. The leather foldover protects the screen when sitting in my brief case.

Device screen not turning off + Media Player Problems

My screen does not turn off, I checked the settings in screen/keyboard and they are set but don't seem to work. This is causing my battery to drain.
Also, I am having intermittent media player problems.
Suggestions?

Hi and Welcome to the Community!
I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Screen is white, will not turn off, reset or nothing. what do I do?

screen is white, will not turn off, reset or nothing. what do I do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Screen not turning off

why is my screen not turning off during a conversation - when I put it to my ear the screen does not turn off and I touch the hold and all the other buttons while talking. I tried switching it off and restarting it .
thx

Try a reset, hold home button and sleep/wake button down together until phone shuts off. Release the buttons when this happens and the phone should come back on. Give it minute to turn on completely and then do a test call to see if it is still happening. May need to do a restore but definitely back up the device before doing that.

I have an iPhone 4 and recently updated the software. Since then, the screen will not turn off after the 1 minute autolock. How do i fix this?

I have an iPhone 4 and recently updated the software. Since then, the screen will not turn off consistently after the 1 minute auto-lock. How do I fix this?

Settings>General>Auto Lock

In the middle of looking through some pictures, my iphone 4 screen turned white and is now not turning off or on. What's the best thing to do?

n the middle of looking through some pictures, my iphone 4 screen turned white and is now not turning off or on. What's the best thing to do?

Try doing a hard reset - by holding the 'Power' button on the top and the 'Home' button simultaneously!

When I try to exit a video on the internet I received a screen asking if I was sure I want to leave. It to not have a confirmation tag. But it has prevented Safari from shutting down. Now I can not turn off my Mac? How do I reset?

When I try to exit a video on the internet I received a screen asking if I was sure I want to leave. It to not have a confirmation tag. But it has prevented Safari from shutting down. Now I can not turn off my Mac? How do I reset?

What kind of videos are you watching?
You need to force quit Safari, but hitting Command-option-esc, and force quit Safari.

Apple iPAD 2. Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment. Can you help please?

Apple iPAD 2. Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment. Can you help please?

Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears. See if that clears the glitch.

"Energy Saver" not turning off my screen...

Similar Messages

Maybe you are looking for