ENET/100 GPIB0 not displayed in MAX device list

I configured the GPIB0 device as an ENET/100 through the win2k control panel. The unit is on our subnet and passes the diagnostic. However, it does not appear in the Max device list. When I try to add a device manually, ENET/100 is not in the list.

Hello Art,
It sounds like you are using NI-488.2 version 1.2. Version 1.2 does not have MAX support for the enet. NI-488.2 ver 2.0 has MAX support on Win 2k for the enet.
Ray K
NI Applications Engineer.

Similar Messages

Range expander not displayed in network device list from Router

My range expander seems to be working properly, blue lights, and improved signal in dead zone. However, I noticed when viewing my network devices from the router settings it did not list anything located at 192.168.1.240. I was wondering why that would be when the expander is working properly? Shouldn't the router show it as a connected device?
Thanks.
Solved!
Go to Solution.

I wouldn't worry about it. Mine doesn't either. I assume because it is set up like the router as a repeater that it is kinda like a "ghost". I know it is there because I can ping it and access it at 192.168.1.240 in the browser. If you want, you can download the LELA network management software. That will pick it up.
Message Edited by Luckydog on 01-30-2009 05:53 AM

Site not displaying on tablet devices

Why is my muse site amyweilpaintings.com not displaying on tablet devices? If no tablet layout was designed for it shouldn't it default to the desktop design when using a tablet?

Did you figure this out yet? If not, you could try unchecking "Redirect From Desktop" under Site Properties, under File.

A Camcorder that's not on the "Qualified Devices List.." Still work?

I everyone. I own a Sony DCR-TRV-250 Digital 8 Hanycam Camcorder and I am looking into Final Cut Express HD, but I noticed that my camcorder is not on the qualified devices list. For those of you who know about this, is there a possibility that my camcorder may still work? Your Support Is *GREATLY* appreciated! Thanks so much.

To use a camera with FCE, it needs to be DV and have a FireWire connection. Your TRV250 does both. Digital8 is a Sony thing, but under the covers it is a DV codec recording on a Digital8 cassette. There are some technical differences in the tape transport speed and how the magnetic recording is made on the tape compared to miniDV tapes, but the codec itself is DV, and the output via the FireWire connection is also DV. So, it should work with FCE, and iMovie too.
The only way to know for sure is to give it a try. Find your local Apple store and take your camera there & try it. That's the same advice we'd give anyone, regarding any camera.
Oh, and by the way, I noticed that your profile says you are running 10.0.x - for FCE-HD you need at least 10.4.6 and QT 7.0.4 - check the full specs here.

HT3624 additional airport express not showing in wireless device list

I have an additional AX to extend my WiFi but it's not showing in wireless device list; it is plugged in, next to base AX, did a hard-reset, amber light is blinking. Everything was working fine for a more than a year. Thank you for your help.

I don't use Xserve but when this happens to me:
I reset the express. I use a wireless Mac to "find" the Express. Need to select the network under the Airport icon. If not there then System prefs/netwrok/status/airport then drop down menu to preferred. If there select it and then select apply then back to that airport icon and finish by using the Airport Utility or in your case Admin utility. If not found in preferred then use the + button. I have never failed to "find" my "lost" network using this counter measure.
If you don't have a wireless Mac then do it with an ethernet connection.

Measuring Points are Not displaying in mobile devices(SAP WM 6.1)

Hi Experts,
In mobile devices the measuring pints for work order not displaying. When we select the "record point" option for particular work order it should display the measuring points for that WO. But it displaying '0 measuring points'. As shown in screen shot below.
But in SAP Bach end Measuring Documents are defined for Work Order.
can any one explain :To display measuring points in mobile devices, need any extra configuration in back end? or
What functionality need to activate? How to enable this?
Thanks
Chigari

Hi Chigari
Measuring Points assigned as PRT's in backend application (SAP ECC) should be displayed in Agentry Work Manager 6.1 by standard, if their corresponding technical objects are assigned to either the Work Order header or one of the operations.
Please check if this requirement is fulfilled in your case.
There is no need to modify anything in the Configuration Portal (as far as I know).
The modification we have made is only regarding Measuring Points belonging to other Technical Objects (and still assigned as PRTs).
Søren Hansen

Finder not displaying all Volumes/Devices

Hello,
The internal harddisk in my iMac is made of two volumes: OS & Data.
Tonight I noticed that those 2 volumes are not displayed on Desktop. They don't appear in Finder Sidebar either. I checked Finder preferences: all checkboxes are 'active'. So all devices should be visible.
When I connect my iPod or external USB Harddisk, they are visible in Finder and on Desktop.
I repaired permission & rebooted without success. All available MacOS updates are installed. I also cleared caches with Onyx before rebooting the system.
In Terminal, I do see the volumes under /Volumes and can 'browse' each volume directories without issue.
Any idea why Volumes for the internal Disk are not being displayed ?
Thank you.

It sounds like you have been bit by the invisiblity bug. See my article here:
http://www.pinkmutant.com/articles/invisible.html
If you recently added comments in the GetInfo box on the partitions, that will cause the problem. The article offers several ways to change the visiblity bit. The last section deals with the Spotlight comments variant.
Francine
Francine
Schwieder

Movie artwork not displaying on mobile devices

Anyone have any idea why the artwork on some movies do not display on my iPhone's or iPad? Shows in iTunes ... not sure what the issue is. Artwork are jpeg files. Need some help, suggestions ...
Thanks,
Sal

May be obvious, but have you checked the box in iPod options in iTunes that says "Display Album Artwork"?
I am having a similar problem, but about half of my artwork will show up on my iPod (it seems to be random which artwork will transfer). When it is plugged into iTunes, all of the artwork is there. I have tried deleting and re-adding artwork to songs with no luck. My iPod is set to "Manual Update", and the check box for album art is checked in iTunes. Also, I used to have my iPod on automatic update, but since I have switched to manual at least some of the artwork added since then is viewable on the iPod, so I don't think it is the setting that is the problem. Any suggestions?
iPod 5G Windows XP Pro

Apple TV does not show up in device list

I've read all the post with the same subject but still can not get the Apple TV to show up in the device list of itunes.
I have multiple computers on a wired/wireless network, one is a windows XP laptop machine and it sees the Apple TV fine, can sync with itunes works great. This machine is connected via wireless connection. This machine does not have my music or photos that I want to sync so I want to sync the Apple TV with my desktop, I was just using the laptop as a diagnostic tool and to better understand the interaction between itunes and the Apple TV. I have tried all the steps given and still can not get the Apple TV to show up as a device on the desktop.
I originally had norton firewall on the desktop, uninstalled that so it would not be in the way, did not help. Windows firewall is not enabled.
I have sharing enabled in itunes and I have look for Apple TVs enabled. I have rebooted the router, Apple TV, computers etc. Reinstalled itunes.
I have a linksys wreless router in the system. I have tried connectnig the desktop via a wired connection as well as a wireless connection, no difference. The Apple TV can get on the wireless network fine, it can access the internet fine to play movie trailer etc. I have also connected it directly to the router via a cable, does not help. I tried connecting the desktop to the Apple TV directly with a crossed ethernet cable, did not work.
The desktop can ping the Apple TV.
I am assuming I do not have a problem with ports as the laptop sees the Apple TV fine?
Any suggestions or tips would be greatly appreciated

Welcome to the Apple Discussion Forums.
To summarise and for clarity: You have set up your laptop itunes library and it works as it should with the tv, now you are trying to add your desktop and it doesn't see the tv.
First point: the Laptop is your primary library, you can only have one primary library and if you wish to sync from the desktop you will need to make that your primary library instead of the laptop. You will need to turn of syncing for the laptop and register the desktop with the tv for syncing first and then the laptop as a secondary (streaming only) library. If you are trying to use your desktop without de-registering the laptop it will only ever be a secondary (streaming) library.
You may have realised this and if so all well and good, but if not you might want to continue to establish your desktop as a secondary library and satisfy yourself that all is well before turning off your laptop and setting everything up again.
On the assumption you are setting up the desktop as a secondary library at this time, how far have you got with registering the desktop, have you successfully entered the pass codes, did the tv show in the device list at any stage. As a secondary library itunes will only show the tv in it's device list when that itunes library is selected as the source library from the tv itself, could this be why you are unable to see it in the device list.

Items on ipod that do not show up on Device list, want to remove them

A pod cast and a video I downloaded from itunes and copied to my ipod are on my ipod but when I connect the ipod they do not show up on the lists of items on the device. I can see and play them on the ipod, but cannot find them on the list of items on the ipod when I connect to itunes...
I want to remove them and can't
baffled....

They should be able to help you. You must have the iPod set to manually managed. Podcasts generally work best when set to auto-sync.
To find these files it is easiest to create a smart playlist on the iPod itself with the right rules to find the files while it is set to manually manage. To delete files through a smart playlist you will need to hold the "Alt" key on the keyboard then hit the Delete key. Atl/Delete is for Mac but may be a combination of Delete and Shift, Control, or Windows key on Windows PCs.

Apple TV not showing up in device list in iTunes

Apple TV stopped showing up in the devices list in iTunes when I tried to sync my movies, and iTunes froze in mid-sync. Since there is no "eject" button for Apple TV in iTunes, the only thing to do was to close iTunes. When I opened it up again...no more Apple TV under devices. Apple TV works as a stand-alone and I can purchase and view using controls in Apple TV, but I can't sync iTunes with Apple TV, so all my previous purchases are stuck in iTunes until I can sync again. I have tried all the work-arounds suggested by Apple. This is my second Apple TV. The first one did the same thing before the returns deadline kicked in. Hey Apple!! Wake up and fix this!!! If I can't sync with iTunes then I am not putting any money into movie rentals or purchases!! This is costing YOU $$$$$$$$!!

I had this problem and tried most of the suggested solutions. I could ping the ATV, so I had not network problems. Finally, this is the suggestion that worked for me (Windows 7 user running iTunes 9.1.0.79):
- power off the ATV
- open iTunes on the computer;
- ensure "Share my library on local network is enabled in iTunes (Edit--Preferences--Sharing);
- power on the ATV;
- go to "Add Shared iTunes Library" on the ATV (Setting-->Computer menu, second line of the menu) which puts up a new passcode on the screen;
- DON'T proceed with inputting the passcode number to add the shared iTunes Library, but instead press "menu" button on ATV remote to exit the "Add Library" function and return to the ATV setting menu;
- this step seems to wake up the ATV<-->iTunes connection and at this point the ATV device reappeared on iTunes!;
- on the ATV (Setting--Computer menu) I was then able to connect to the nominated iTunes library (top line of the menu) and enter the passcode required by that screen.

New iPad is not on the authorised devices list

Every thing seems to be working as it should. I can download from the store etc. but, my new iPad Air is not shown on the authorised devices list in my account.
Is there something I need to do to get it recognised?
Cheers.

Same for me, Diamond White. Everything seems to work, but my new iPad Air isn't showing up in the list.
Thanks for suggestions, King_Penguin. Alas, I tried all of those except iTunes Match (don't want or need) and still no joy getting the device to appear in the list. My main PC is there along with my iPad 3.
Regards.

TV not showing up in device list

I've always had problems with my TV disconnecting from the network but yesterday and today is the worst it's ever been. I ran the update yesterday. After that I tried to stream an HD version of Body of Lies from my computer (about 2.5 GB). I only got 18 min into it with constant disconnects. After several attempts to get this streaming to work correctly I decided to try and sync the video to TV so I wouldn't have to worry about the signal breaking down any more. At this point, the TV disappeared from the devices list and has not shown back up in my iTunes. I've factory restored it and updated it again and nothing. Any ideas?
Also, this may have to do with ******** networking. My roommate messed with the wireless settings (manual vs dhcp blah blah) and may have ****** it all up though I'm not sure. The service in general (Zoomtown DSL) just isn't very good.

Have you tried linking your iTunes account with your Apple TV?

EA4500 Router Device not showing up in device list - Please Help

Hi all
I have an EA4500 and am using Cisco Connect Cloud software. Its working mostly fine except that I have one device on the network that will not show up in the device list. This is not an issue in itself and normally I would ignore (although it used to show up when I forst got the router) however.......
The device is a WDTVLive media unit and required access to windows shares on a media server. Now the WDTVLive device is server an ip address by the router and is available from everywhere on my network but every couple of days it loses the capacity to search windows shares.
I know what you are thinking and I initially thought the same, this is an issue with the WDTVLive box. However one day I spent a few hours trying to resolve (Am an IT Consultant and know a little about networks) and found that I could not fix the issue. I then rebooted the router and it started working. I have since confirmed that every time it breaks I have to reboot the router.
So I kind of think the two issues are linked.
Sorry for the ramble. Can anyone help please.
Thanks in advance
Alan

Further to this issue which I ignored as it did not really cause any issues, I recently clicked a samsung tv device which thinks that is three different devices. It has three lan addresses listed. One of the addresses listed is the original device that will not show up so I suspect that this is why it does not show up.
It seems that I have a conflict but I can find nothing anywhere to allow me to resolve.
I cannot even delete the Samsung TV device as its x button is not editable.
Should I just try removing the cloud connect software. I must admit that I am starting to think that I made a bad decision with this router.
Any help would be greatly appreciated

IPad does not appear in iTunes Devices list

My MacBook Pro, iPhone, and iPad are all on the same network, however my iPad frequently does not appear in iTunes Devices when not physically connected by USB. No problem with my iPhone. Anyone else with this problem? Any solution? (Yes, all OS/iTunes softwares are current.)
Further detail, to temporarily fix this issue, I physically connect my iPad via USB to sync it. Temporarily the iPad will be seen in the device list allowing sycing to occur while remotely charging, but at some random time later my iPad is no longer found by iTunes - again without the physical USB link. So, yes there is a work around, but it is annoying to be so up and down with this feature.
Any ideas are appreciated.

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
 Cheers, Tom

ENET/100 GPIB0 not displayed in MAX device list

Similar Messages

Maybe you are looking for