Enforce UCM to use Profile instead of Standard when Checking In Similar

Hi all,
I have an ongoing discusssion on club-oracle forum http://www.club-oracle.com/forums/enforce-ucm-to-use-profile-instead-of-standard-when-checking-in-similar-t2501
and I need your input, as this is critical in my UCM implementation.
Regards,
v
Edited by: George Papadopoulos on Mar 22, 2010 6:48 PM

Phillip,
I agree with you. However, if we take a trip in the "wayback machine" to the big forum changeover (can it really be that long ago?), I was BILL HUNT. Notice that everything is in all caps, because I'd had this one, from the earliest days of Adobe on the Internet. That was what the OS's of the day did.
The forum changeover happened, and out of almost nowhere, the_wine_snob surfaced. Immediately, I went to change this back to BILL HUNT, or the updated, Bill Hunt. Could not do it. Both names were taken. In 2.5 days? I could not believe this. I had filled in the little info screen, prior to the changeover, with all data - same e-dress, same screen name, etc.. With the fora down for those few days, and me logging in as soon as they came up, how could others get my name? Must be a lot of BILL HUNT's in OZ, or NZ!!! Believe me, I tried. I had never posted to any Adobe forum, even back to the NTTP-only days, as other than BILL HUNT. Gone. Still, I try to sign every post with "Hunt."
I hear you, but many seemed to get caught in the same "trickbag," as I was.
At least with this screen name, if I hit a few keys incorrectly, or mis-remember something in a product forum, the readers can "fill in the blanks." Too much wine...
Hunt

Similar Messages

How do I use parentheses instead of dashes when exporting in Lightroom?

I don't always want to replace a photo without warning. Sometimes I like to see the photos side by side. Windows convention uses parantheses for different versions of an image, which keeps the jpegs together and separate from tiffs or other raw images. But Lightroom uses a dash so I get, for example, 20120101-1.jpg. I need it to be 20120101 (1).jpg

You can't.

How can I set up my iPhone 6 to use wifi instead of cell when available?

since getting my new iPhone 6, my cell data usage has increased while connected to a wifi network at home. How can I get my iPhone to use wifi if available?

It will always use WiFi if available. If the phone goes to sleep it drops the WiFi connection unless you plug it in to power. Have you checked to see which app is using the cell data?

Can execut a query in Oracle UCM to get View_Values instead of using GET_SC

Dear All,
i have a question that i had google it and didn't find anything helpful.
i want to ask if i can execut a query in Oracle UCM to get View_Values instead of using GET_SCHEMA_VIEW_VLAUES service ?
ie: asuume that we have a Table name called Employees (having empId, empName) and have a view named as Table name; Employees.
instead of use the GET_SCHEMA_VIEW_VLAUES service to get the data of Employees, can i write a query, ex: select from Employees*_ to get the data.
note: i have a connection parameter to connect to oracle UCM database
any suggestions.
Regards

Yes, you can execute the query and store results into a result set (available also in iDocScript).
There are two sample components that you could use as a starting point - see here http://www.oracle.com/technetwork/middleware/webcenter/content/howtocomponentsbundle-132171.zip or here for 11g http://bexhuff.com/2011/03/howto-component-samples-for-oracle-ucm-11g
Take a look at DataAccess and DatabaseProvider from the sample stack.

When clicking on an email link, I want the firefox user profile menu to open instead of going to the last used profile. How do I make this work?

When I click on a link in Thunderbird to open a web page, and Firefox is not already open, I want to have the user profile screen presented so that I can select which profile to use for the Firefox session. Instead, it opens the last used profile. Is there a way to do this?

That is is always a problem when you are using multiple profiles and Firefox isn't running.
It might work if no profile is selected (i.e. marked as Default=1 in profiles.ini).<br />
You can use desktop shortcut that open with a specific profile (-P "profile").<br />
There is also a setting in the Profile Manager (Don't ask at startup).

Bpm UWL iview , it is possile to use BPM UWL iview instead of standard UWL iview?

Hi
It is possible to use BPM UWL iview instead of standard UWL iview?
if yes then how?
thanks in advance

Hi Radhesh,
If you need to get some BPM skills then try the BPM space itself or better yet the Process Orchestration space has the most recent materials by checking out the materials in http://scn.sap.com/community/process-orchestration
Apart from that the BPM forum can help you, but it's always best to post one question at a time.
Perhaps you could be clearer about what you are looking for?
Is it an approach to the process?
Is it how to call the backend system?
Is it how to work with the user interfaces?
Think about it carefully and then start a new discussion for each issue.
Rgds,
Jocelyn

How do I find/load more standard camera profiles than "Adobe Standard"

I have reloaded Lightroom 3.3 several times. Still the only camera profile I have available is Adobe Standard. I would like to have access to profiles like Camera Standard and Camera Vivid. How can I load and/or get these to show up?

MDButler17 wrote:
I expect that with some of the profiles are camara specific, but is there a reason I can't see more of the generic profiles (e.g., Camera Vivid)?
generic and profiles are two words that just can't go to together, a complete oxymoron I am afraid. Profiles are specific to a device that has been profiled, in this case the colour reproduction of a camera sensor. Adobe profiles every camera it supports, this is the profile called Adobe Standard for you camera. On some cameras Adobe also produce other calibrations, these often mirror the names used by the camera manufacturers to describe their own profiles. Most camera manufacturers do not actually produce more than one profile themselves, instead they produce a choice of different colour interpretations that can be applied only to the in camera jpgs. In these case Adobe don't usually produce anything other than the Adobe Standard.
You can, of course, make your own calibration profiles specific to your actual cameras sensor (sensors themselves varies so even the profiles supplied by the manufacturers and Adobe may not actually match your sensor. The tools and instructions on how to do this are supplied free by Adobe here.
If your camera has profiles other than the stand, it will be located
On Mac OS X: /Library/Application Support/Adobe/CameraRaw/CameraProfiles
On Windows 2000 / XP: C:\Documents and Settings\All Users\Application Support\Adobe\CameraRaw\CameraProfiles
On Windows Vista/7: C:\ProgramData\Adobe\CameraRaw\CameraProfiles

E72: how to force handsfree profile instead of hea...

I just purchased a BlueAnt Supertooth 3 carkit and manged to pair it with my E72. The problem is I noticed that it automatically paired using the "Headset" profile.
If my limited understanding is correct, the "Handsfree" profile offers more functionality over the "Headset" profile.
Thus, my question is: how can I force the E72 to pair using the "Handsfree" profile instead of "Headset" profile?
Thanks!

I just purchased a BlueAnt Supertooth 3 carkit and manged to pair it with my E72. The problem is I noticed that it automatically paired using the "Headset" profile.
If my limited understanding is correct, the "Handsfree" profile offers more functionality over the "Headset" profile.
Thus, my question is: how can I force the E72 to pair using the "Handsfree" profile instead of "Headset" profile?
Thanks!

ISE 1.2, Patch 7: "NAK requesting to use PEAP instead"

We're experiencing seemingly random occurrences of users failing authentication because they're trying PEAP vs EAP. Does anyone know if it is possible to force the Windows supplicant to use EAP only?
For what it's worth, the user can fail authentication for hours and I can either allow open authentication on the port for a bit, or the user can leave for the day and come back tomorrow and authentication will succeed. I'm not sure if it's an ISE problem or a supplicant problem, but I'm leaning towards supplicant.
Personas:
Administration
Role:
PRIMARY(A)
System Time:
Apr 24 2014 08:26:58 AM America/New_York
FIPS Mode:
Disabled
Version:
1.2.0.899
Patch Information:
7,1,3
11001
Received RADIUS Access-Request
11017
RADIUS created a new session
15049
Evaluating Policy Group
15008
Evaluating Service Selection Policy
15048
Queried PIP
15048
Queried PIP
15004
Matched rule
11507
Extracted EAP-Response/Identity
12500
Prepared EAP-Request proposing EAP-TLS with challenge
12625
Valid EAP-Key-Name attribute received
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12301
Extracted EAP-Response/NAK requesting to use PEAP instead
12300
Prepared EAP-Request proposing PEAP with challenge
12625
Valid EAP-Key-Name attribute received
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12302
Extracted EAP-Response containing PEAP challenge-response and accepting PEAP as negotiated
12318
Successfully negotiated PEAP version 0
12800
Extracted first TLS record; TLS handshake started
12805
Extracted TLS ClientHello message
12806
Prepared TLS ServerHello message
12807
Prepared TLS Certificate message
12810
Prepared TLS ServerDone message
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
12318
Successfully negotiated PEAP version 0
12812
Extracted TLS ClientKeyExchange message
12804
Extracted TLS Finished message
12801
Prepared TLS ChangeCipherSpec message
12802
Prepared TLS Finished message
12816
TLS handshake succeeded
12310
PEAP full handshake finished successfully
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
12313
PEAP inner method started
11521
Prepared EAP-Request/Identity for inner EAP method
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
11522
Extracted EAP-Response/Identity for inner EAP method
11806
Prepared EAP-Request for inner method proposing EAP-MSCHAP with challenge
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
11808
Extracted EAP-Response containing EAP-MSCHAP challenge-response for inner method and accepting EAP-MSCHAP as negotiated
15041
Evaluating Identity Policy
15006
Matched Default Rule
15013
Selected Identity Source - *****
24431
Authenticating machine against Active Directory
24470
Machine authentication against Active Directory is successful
22037
Authentication Passed
11824
EAP-MSCHAP authentication attempt passed
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
11810
Extracted EAP-Response for inner method containing MSCHAP challenge-response
11814
Inner EAP-MSCHAP authentication succeeded
11519
Prepared EAP-Success for inner EAP method
12314
PEAP inner method finished successfully
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
15036
Evaluating Authorization Policy
24433
Looking up machine in Active Directory - host/*****
24435
Machine Groups retrieval from Active Directory succeeded
15048
Queried PIP
15048
Queried PIP
15048
Queried PIP
15048
Queried PIP
15048
Queried PIP
15004
Matched rule - Default
15016
Selected Authorization Profile - DenyAccess
15039
Rejected per authorization profile
12306
PEAP authentication succeeded
11503
Prepared EAP-Success
11003
Returned RADIUS Access-Reject

salodh,
Thank you for your response. Below is the authorization policy it should hit. The trouble is the workstation wants to use PEAP for some reason but we don't want PEAP because we're certificate-based. I understand what you're saying, and it's because I didn't word my question correctly.
12500
Prepared EAP-Request proposing EAP-TLS with challenge
12625
Valid EAP-Key-Name attribute received
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12301
Extracted EAP-Response/NAK requesting to use PEAP instead
If the NAK would not request PEAP, it would continue on to the following Authorization Policy (and succeed):
Name
Wired-******-PC
Conditions
Radius:Service-Type EQUALS Framed
AND
Radius:NAS-Port-Type EQUALS Ethernet
AND
*******:ExternalGroups EQUALS **********/Users/Domain Computers
AND
Network Access:EapAuthentication EQUALS EAP-TLS
Again, this PEAP request only happens occasionally. This same workstation will work at other days/times. If I could figure out why some workstations randomly request PEAP (or find a way to force EAP only) I think that would take care of it.
Thanks again, sir.
Andrew

In outlook 13, How can I get my new mail to populate my existing "account" or "Profile" instead of two separate ones-reposted, maybe first was wrong place

I set up outlook, using mainly wizards. I have received some mail from my provider account.
trying to get data from my old pc, I accidently set up another account, it became default.
I finally got it deleted
I now have my first profile with email I received, and all data (contacts, emails and archived items) but now I can not get new email.
I tried to "change settings" but there is no account listed to chose to change.
I create new and again I have two accounts.
How can I get my new mail to populate my existing "account" or "Profile" instead of two separate ones or
How to set up completely new, and move everything from existing profile to it and get rid of existing, Just do not want two.
Thank you so much.

They can help you over here.
http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1387249501544
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

In outlook 13, How can I get my new mail to populate my existing "account" or "Profile" instead of two separate ones

I set up outlook, using mainly wizards. I have received some mail from my provider account.
trying to get data from my old pc, I accidently set up another account, it became default.
I finally got it deleted
I now have my first profile with email I received, and all data (contacts, emails and archived items) but now I can not get new email.
I tried to "change settings" but there is no account listed to chose to change.
I create new and again I have two accounts.
How can I get my new mail to populate my existing "account" or "Profile" instead of two separate ones or
How to set up completely new, and move everything from existing profile to it and get rid of existing, Just do not want two.
Thank you so much.

You can open your second profile which is no ability of receiving new mail and export all of messages/contacts/calendar item to a PST file and save it somewhere.
Then open the first profile, import the privious PST file into this profile to solve the problem.
Using .pst files in Microsoft Outlook is good way to transfer the data, here is some information how to manage the PST file for your reference.
http://support.microsoft.com/kb/287070/en-us
Tony Chen
TechNet Community Support

DTP plugin can't connect to 10g DB that uses SERVICE_NAME instead of SID

Hi,
I am trying to set up a connection to a database that uses a service name instead of a SID (see below for the TNSNAMES entry. It gets an ORA-12505 error because the listener does not know of SID given in connect descriptor. The Connection descriptor used by the client was:
tdc-sun-77-vip.unix.tdc.xxxyyy.com:1521:SRV_TMS_TNV.
My understanding is that the url for JDBC for service name should use a "/" instead of a ":" to separate the port from the service name. The dialog for creating the connection in SQL Developer has radio buttons to choose between SID and Service Name, so it can generate the url appropriately. The wizard for the Eclipse plugin does not have this option and the plugin always uses a ":" as the separator.
If anyone else has encountered this and gotten around it I would appreciate knowing how.
I am using the Oracle Database Tools 1.2.0.200907171332 for Eclipse Galileo.
Thanks... Bob
AMR01TNV_TMS =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = tdc-sun-77-vip.unix.tdc.xxxyyy.com)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = tdc-sun-78-vip.unix.tdc.xxxyyy.com)(PORT = 1521))
(LOAD_BALANCE=ON)
(FAILOVER=ON)
(CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = SRV_TMS_TNV)
(FAILOVER_MODE=
(TYPE=select)
(METHOD=basic)
)))

Still broken after two years. Oracle Database Tools version 1.7.2.20110330204, part of OEPE 11.1.1.7.2. Using Oracle Thin Driver ojdbc14 for 10.2.0.2.
(1) Change to Database Development perspective.
(2) In Data Source Explorer, right click Database Connections. Choose Connection Profile Oracle Database Connection.
(3) Name: OEPE Is Broken
(4) Description: Service Names Are Not Supported.
(5) Click on the icon to the right of Drivers: Oracle Thin Driver. This allows one to edit the driver definition.
(6) Change ConnectionURL to 'jdbc:oracle:thin:@server:1521/servicename. This will prove that the plug-in is not using the driver definition as a template.
(7) Use SQL Developer to probe your database. Ensure that the database is one that requires a service name and cannot connect using a SID.
(8) In the "New Connection Profile" dialog....
SID: (try a service name for a database that requires it)
Fill in Host, Port number, User name, and Password.
Note that the ConnectionURL contains a colon instead of a slash in front of the service name. The plug-in seems to be using the colon.
(9) Test Connection
java.sql.SQLException: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
ac4-xxxxx-007-v.ysm.ac4.yahoo.com:1521:acxxxxx.ysm.ac4.yahoo.com
(10) Maybe Test Connection does not work and the plug-in is functional. Click on Finish. No, not the case.
(11) Maybe SID should be

Native Supplicant "NAK requesting to use PEAP instead"

Hello,
We have a Cisco ISE infrastructure in place and we're experiencing seemingly random occurrences of users failing authentication because they're trying PEAP vs EAP. Does anyone know if it is possible to force the native Windows supplicant to use EAP only?
"Microsoft: Smart Card or other certificate" is selected under network authentication method, by group policy, and I thought that wouldn't allow PEAP, but our ISE logs show "NAK requesting to use PEAP instead", after which authorization
fails because we're not using PEAP.
For what it's worth, the user can fail authentication for hours and I can either allow open authentication on the port for a bit, or the user can leave for the day and come back tomorrow and authentication will succeed. I'm not sure if it's an ISE problem or
a supplicant problem, but I'm leaning towards supplicant.
Thanks,
Andrew

Hi,
About this issue, please contact Cisco Tech Support for help.
Karen Hu
TechNet Community Support
I've already been in contact with them and they've verified our configuration. All that can be done on the Cisco side is to "propose" the client to go through EAP-TLS as the first option, which we are doing. This will not block any clients trying to connect
using other protocols, and, though this will propose EAP-TLS, there is now way to enforce it at the supplicant level. This will be a client decision always. From Cisco:
Please monitor this after the change we applied, but if the issue persists, since we are dealing with windows supplicant, it would be a good idea to involve the native supplicant support.

How to use 0EC_CJOB_ATTR instead of 0JOB_ATTR in 2004S ECC HR?

Situation:
We did some enhancement (addition of fields) to the datasource 0EC_CJOB_ATTR. All the changes made to 0EC_CJOB_ATTR appear in 0JOB_ATTR as well.
1. But when trying to extract data in /nRSA3, 0JOB_ATTR is erroring out and 0EC_CJOB_ATTR does not give any data eventhough ECC maintains some data for some particular PERNRs. Is there any suggestion on what could be the reason?
2. In the standard cubes like 0PA_C01, 0JOB is used as a characteristics. What is the process to use 0EC_CJOB instead of 0JOB so that we can use the standard cubes and associated queries without customization? Any thoughts?
Thanks
Raj

HI experts,
Any thoughts? We desparately need some direction!!!

How to use 0EC_CJOB_ATTR instead of 0JOB_ATTR in 2004S ECC HR BI?

Situation:
We did some enhancement (addition of fields) to the datasource 0EC_CJOB_ATTR. All the changes made to 0EC_CJOB_ATTR appear in 0JOB_ATTR as well.
1. But when trying to extract data in /nRSA3, 0JOB_ATTR is erroring out and 0EC_CJOB_ATTR does not give any data eventhough ECC maintains some data for some particular PERNRs. Is there any suggestion on what could be the reason?
2. In the standard cubes like 0PA_C01, 0JOB is used as a characteristics. What is the process to use 0EC_CJOB instead of 0JOB so that we can use the standard cubes and associated queries without customization? Any thoughts?
Thanks

HI experts,
Any thoughts? We desparately need some direction!!!

Enforce UCM to use Profile instead of Standard when Checking In Similar

Similar Messages

Maybe you are looking for