Enforcement states for a deployment report status is not refresh..

Enforcement states for a deployment report status is not refresh.
We have deployed patches by software update and monitoring status by checking report
Enforcement states for a deployment. We have observed status difference in report and in actual PC. Status of One PC is
Downloaded update in report  but actually that patch was
installed on PC.
why this difference and what is the solution to solve this.

Hi Garth - I don't recreate the SU group. I recreate the deployment from
the SU group.
The SU Group contains all deployed updates and the deployment is a "catch-up" and targets a collection of all clients on the particular platform ie. Server 2008 R2. It's a mandatory deployment and I've set it to report "all messages" as opposed to the default
"success and failure".
There's no particular SU that are showing ESU. It's the client that shows ESU via the report "Enforcement States for a Deploymennt", and it's only ever the clients that were "Pending System Restart" previously that change to "Enforcement State
Unknown". The software centre on these clients all know they're pending restart, and if the pending restart is performed on the client it will then change to "Compliant", but it never changes from ESU while its real state is "Pending Restart".
Hopefully that clarifies the scenario.
Like I said, I have a workaround, but I'd like to eliminate this behaviour on all my SCCM 2012 instances which are all affected.

Similar Messages

  • Enforcement States for multiple deployment ID's

    I would like to have a report for the enforcement states of multiple deployment ID's. I have tried manipulating the default "States 1 - Enforcement states for a deployment" to have multiple default values but have not succeeded in getting
    the report to run.
    In our Software Updates we have multiple collections targeting specific groups of computers and then we have specific update groups within specific date ranges deployed to those collections. In some cases I have multiple deployments targeting the same collection
    and thus the want to have a single report for the enforcement status of multiple deployment ID's.
    Unfortunatley my level of SQL reporting is minimal, does anyone have knowledge of a report or query to use multiple deployment ID's for returning the enforcement states?

    Hi,
    You may have a look on the following blog, hope this could help you edit your report.
    http://blogs.msdn.com/b/steverac/archive/2013/01/13/modifying-a-report-to-merge-software-update-deployments-with-updates-delivered-through-standard-software-distribution.aspx
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Illegal state for operation deploy: 'STATE_PREPARED'

    Hi I am getting the following exception while updating an ejb jar on OSB for a transport type Business Service
    ]Illegal state for operation deploy: 'STATE_PREPARED'.
    weblogic.management.DeploymentException: [Deployer:149266]Illegal state for operation deploy: 'STATE_PREPARED'.
    at weblogic.deploy.internal.targetserver.operations.ActivateOperation.validatePrepare(ActivateOperation.java:231)
    at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:76)
    at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
    at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:723)
    at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1190)
    at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:248)
    at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    >
    Any help or pointers would be higly appreciated

    Are you calling the right path?
    The call to page.getContentResource("image") will end up calling the following:
    resource.getResourceResolver().getResource(resource, “jcr:content/image”);

  • Is there a command line method for publishing/deploying reports?

    Is it possible to publish/deploy reports using the command line? 
    Also, it is possible to change the datasource for a report via some command line option?
    I am developing the reports locally (Win XP), and then checking them into source control.  They need to be deployed to a BO Server for Dev, Test and Prod.
    I would like to be able to create a script to deploy the reports into the different environments.
    In addition, the datasource needs to be changed before deploying to TEST (since it is on the same server as DEV, just a different port).  Having to manually open each report and change the datasource as the reports are migrated could get to be time consuming as the number of reports increases.
    Thanks for any suggestions.
    Paul

    Hi Paul,
    No, but you can do all of this using one of our SDK's. Look for samples above or from this WIKI:
    Root Page
    http://wiki.sdn.sap.com/wiki/display/BOBJ/BusinessObjectsHome
    Enterprise Samples (including managed and unmanaged ras)
    http://wiki.sdn.sap.com/wiki/display/BOBJ/BusinessObjectsSDKSampleApplications
    Non-Enterprise Samples
    http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsSDKSampleApplications
    Exporting Samples (RAS)
    http://wiki.sdn.sap.com/wiki/display/BOBJ/NETRASSDK+Samples#NETRASSDKSamples-Exporting%2FPrinting
    Thank you
    Don

  • Software Deployment - the status is not correct

    Hello everyone,
    My company is running SCCM to manage clients and deploy software. I found that almost computers got installed successfully but report and deployment status show not correct information. This is quite weird. Please take a look at screenshot.
    Anybody has idea on it?
    Le Nhut Minh PwC Vietname Limited.

    Hi,
    Please check software distribution logs to find some useful information.
    http://technet.microsoft.com/en-us/library/hh427342.aspx#BKMK_AppManageLog
    If the status forward successfully, MP_Status.log also need to be examined.
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Report Portlets do not refresh data.

    How can I refresh a report portlet?
    I have created a report and a forms provider based on the same table. I put the portlets on separate TABS on the same PAGE. The report works fine, but when I update the information on the form and return to the report it does not reflect the changes. I have pressed 'refresh', I have gone to another page and come back, no luck. The only way to see the changes is to log out and back in again. Any ideas?
    Thanks, Deb

    I had caching turned off. When I turned on both content and page definition, I was unable to query my forms. The forms and reports are on the same page, different tabs. When I select cache page definition only, I get the same results as no caching. The forms will query my data, I can update, but when I return to the reports TAB, the data has not changed. (Yes, I did click refresh.) I have found that if I click the 'Customize' link on the portlet containing the report and then click 'OK' the data will update. This, however gives me a new error that I will worry about later. For now, the users have 'Minimize' but do not have the 'Customize' Link and the 'minimize' link does not refresh the data, nor give me the new error.

  • SQL TRACE for WEB deployed report

    When I put
    Alter Session Set sql_trace=TRUE
    into the BEFORE Parameter Form trigger...
    I get a trace file showing data on the one SQL in that trigger.
    There is no TRACE output of the main query or any of the PL/SQL in the Program Units.
    The report is invoked from company-wide intra-net.
    I think it is Oracle Apps running in Linux server.
    What am I doing wrong?
    PS
    I cannot execute this report from Report Builder.

    Hello,
    Just a remark : if you are using Reports 9.0.4 / 10.1.2, you don't have to modify the reports , you can activate the SQL trace with the parameter SQLTRACE=YES
    http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/cmdline/common/cla_sqltrace.htm
    Regards

  • Report Status is Not Displaying in My history

    Hi All,
    There is no history details are displayed in history but it was appear in schedule tab.
    Can anyone tell me how to fix it
    Regards

    Hi,
    Please ask your ABAPer to check whether there is any restriction on the BLART (Document type) field while selecting the data from BSEG or BSID/BSAD table.
    ABAPer need to include the AB document type while selecting the data.
    Regards,
    Gaurav

  • Report instance history not refreshing

    Here is my issue.  I view the history of a published Crystal report in Central Managment Console.  I then try to view the history of another report and it displays the history of the previous report I viewed.  The only way I can view another reports history is to log out of CMC, clear the browser cache and close the browser.  I then log back and I can view ther history of a different report.  I have played with the browser settings to not avail.  Any ideas?

    Hi,
    It sound like you are using WebSphere as your application server, if yes  then follow the SAP Note 1250113.
    Thanks,
    Muhammad

  • Status does not refresh from "Started" to "Completed" into Cornerstone LMS

    Hello,
    The SCORM files (SCORM 1.2) I have produced with Captivate 8 do not refersh automatically in Cornerstone.
    Actually, the status remain to "Started" even if the online course is completed. The user is obliged to do "Ctrl" + "R" to get the status updated to "Completed".
    I have submitted the case to Cornerstone and what is strange is that it appears that it works correctly with other authoring tools.
    Does anybody experienced that?
    Is ther any workaround?
    Thanks
    Fabrice

    Have you test the same package on scormcloud?

  • Enforcement State Unknown but updates visible on clients?

    Hi all. A strange issue has just appeared in one of our environments with software update deployments. It would appear the report "Enforcement States for a Deployment" is stuck showing clients as "Enforcement State Unknown".
    The clients can see updates no problem at all, so functionally I have no issue. Updates are available and install correctly, but my issue is my deployments are now completely blind in that I have no status updates at all - 4+ days now and the status
    hasn't changed. I can't see any issue on the client side - StateMessage.log indicates it can successfully forward messages.
    Weirdly, this issue only seems to be affecting Software Update Deployments as software distribution reports are updating their statuses as expected.
    I've checked inboxes for blacklogs and can't see anything too out-of-the-ordinary, and I've also tried the "force state refresh" VBS that's doing the rounds on these boards. I've even tried reinstalling the client and recreating the deployments, but all
    these actions have me believe the issue is with my SCCM server only.
    Can anyone help me?
    EDIT - The plot thickens somewhat. The report "Evaluation states for a deployment" has just changed to "Evaluation Succeeded", but  "Enforcement States for a Deployment" remains at "Enforcement State Unknown". HELP!

    I think, you need to take a pause and analyse the log files to verify that everything is gng well.
    The below blog posts would help you in doing that,
    http://blogs.technet.com/b/configurationmgr/archive/2010/11/04/information-on-the-configmgr-2007-client-side-process-for-software-updates.aspx
    http://blogs.technet.com/b/sudheesn/archive/2010/11/10/troubleshooting-sccm-part-iii-software-updates.aspx
    Anoop C Nair -
    @anoopmannur
    MY BLOG:
     http://anoopmannur.wordpress.com
    User Group:
     ConfigMgr Professionals
    This posting is provided AS-IS with no warranties/guarantees and confers no rights.

  • What is the state of JavaFX Deployment?

    I did a search for deployment, self-contained apps, etc and found not a single thread in this forum about these topics.
    I watched Mastering Java Deployment from JavaOne 2012 and I've proposed that my company leverage these technologies for our product to simplify our deployment to Enterprise customers.
    I've done a lot of reading of the Java Deployment blog (https://blogs.oracle.com/talkingjavadeployment/) but it appears to have been abandoned when Igor Nekrestyanov left Oracle for Intel in Nov 2012.
    Here is the latest update from that blog:
    +"> fx:platform doesn't support the "basedir" attribute+
    +Please use JDK8 builds from http://jdk8.java.net/download.html+
    +Due to change of release plans some changes had been postponed till next 7u update and will NOT be available in 7u10. Packaging changes are among them.+
    +Posted by Igor on October 29, 2012"+
    Specifically what features were postponed out of Java 7u10?
    It just says 'packaging changes'?
    Which packaging changes were postponed?
    If we plan to use JavaFX packaging to create a self-contained app from a Swing application, will that not work in Java 7u10 and is it implemented in the current JDK 8 builds?
    Can you confirm whether or not this will work in any version of Java 7?
    There is now more up to date documentation here (http://docs.oracle.com/javafx/2/deployment/jfxpub-deployment.htm). It says last update was April 2013, but indicates that the information applies to JavaFX 2.2.21 and not JavaFX 8. It covers self-contained applications and using JavaFX in Swing applications, but it is not completely clear to me that packaging Swing applications with JavaFX 2.2.21 is supported.
    Where can I go to find the latest updates on JavaFX deployment now that the Blog is dead?
    Will there be talks at JavaOne 2013? I really need to get updates on the latest state of JavaFX deployment before then.
    Note: I posted comments on the blog and was told that I had to wait for moderator approval, but it has been many days now without those comments being posted. So I'm not sure that there is an active moderator.
    Thank you.

    @bouye
    If you have time, you may wish to create feature requests against the deployer in the JavaFX jira for some of the items in your post.
    Note that some of your requests such as pre-post packaging scripts might not ever be implemented in the deployment tools (or would only be implemented as a loose shell like the maven rpm plugin), but might be delegated to some of the package specific packaging tools which the JavaFX deployment tools delegate too (for example the rpmbuild tool for rpm scripts).
    While the JavaFX 2 branch is pretty much receiving very few updates now and most of the development effort is on JavaFX 8, I think a bunch of fixes and feature enhancements to the deployment tools will be added in a forthcoming JavaFX 2.2.40 release.  There are 55 deployment issues addressed for 2.2.40.  Some of those fixes were performed six months ago, so it is frustrating that it takes so long for Oracle to officially release them - they did seem to be making such good progress on this a year ago.  If you accept or work around some of the warts in the self-contained application packaging process, the tools work pretty well (at least for me).
    You can also find the deployment issues scheduled for Lombard (JavaFX 8.0).  Most of the stuff you mention is not in there I think, also I think a lot of the deployment tasks which are not currently completed will likely end up getting dropped from the Lombard release as JavaFX 8 goes through a feature freeze and restricted high priority bug fix lockdown.
    It may be worth investigating 3rd party tools such as the JavaFX maven plugin or JavaFX gradle plugin, you can log feature requests (or contribute code) against those projects for additional features you require - the features might end up getting deployed quicker (as long as capable people are willing and have time to work on them) than trying to integrate into the main JavaFX deployment tool code.  The JavaFX maven plugin has picked up 54 stars and 13 forks on github, so it is a mildly active project.

  • SSRS: "View Report" button doesn't refresh parameter dropdowns

    So many people have asked similar questions about why SSRS report parameters are not refreshed when "View Report" button is clicked and MSDN simply comes back with an answer "work as designed". It's a bad design, period.
    Here is my suggestion to Microsoft team who works on SSRS: either add a "Refresh Parameters" button at the end of the last parameter dropdown so users can force reload the parameter list, or add "Reload
    Report" after "View Report" button (which should be re-named "Refresh Report" more precisely) to allow user reload the entire report (as if it was Ctrl-F5 is pressed in I.E.), not just to refresh the main report dataset as "Review
    Report" button is currently doing.

    Hi Steve Liu,
    Thanks for your suggestion and you can also submit this suggestion at
    https://connect.microsoft.com/SQLServer/
    If the suggestion mentioned by customers for many times, the product team may consider to add the feature in the next SQL Server version. Your feedback is valuable for us to improve our products and increase the level
    of service provided.
    Thanks for your understanding
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • Report Map Section not updating after refresh

    Hi
    I have created a section in my report based on employee.  After executing the report for the first time the report map shows the section and each employee for which a section has been created.
    The is really useful as you can use the report map to navigate directly to info for a specific employee.
    When I refresh the query and select a different cost center a new list of employees is presented in the report, however the report map is not refreshed to relect this new list of employees.
    Is there a separate step to get the report map to update the sections for the changed variable selection?  (In this case I selected a different cost center and as a result got a new list of employees)
    Thanks
    Ian

    A few things I would suggest you do to determine where the problem lies.
    1) Create an Essbase pull sheet in Excel that mimics the form and verify you see the data in Essbase -- you should see it just after your form is saved.
    2) Compare the dimensions on your report with those on the Form. I would guess your report has an upper level member that is not dynamically calculated -- if this is true then if you really want the report to show the exact data as the form then update the report appropriately.
    Good Luck,
    -John

  • Adding new Updates makes Reports show compliance status as "Enforcement state unknown". Old updates are still installing though.

    Hi, Just wondering if anyone has seen this before and resolved it?
    Basically, 2012 Software Updates have been working fine for over a year. Last months Patch Tuesday updates were fine too.
    However, this week I added a new update to a Software Update Group/deployment. This update did not deploy, and when I run a report, I get "Enforcement state unknown" for ALL clients in the collection. This happens to any deployment I amend. And
    also if I create a new update group and new deployment - same thing - "enforcement status unknown".
    However, updates previous to this week continue to download and install fine for all deployments. Deployments which I have not changed appear to continue to report correctly (unknown, compliant, pending system restart, etc).
    In the SCCM console for Software Updates, the "required" and "installed" figures are still showing correctly.
    Custom software packages continue to download and install too.
    All servers have sufficient disk space. Most collections dont have maintenance windows, and the deadlines are correct.
    Not sure what this could be, a problem with the Management Point? But I can see any errors in the "monitoring" view on the server. The client log files like "wuahandler.log" and "windowsUpdate.log" appear fine also, no obvious
    errors.
    I cant see any evidence of a group policy conflict. The WSUS entry is still correct in the local group policy (GPEDIT.MSC/admin template/windows comp/ windows update).
    Any ideas here? Thanks

    There were absolutely no errors in WUAhandler.log on existing machines - all looked normal, which baffled me. Machines with newly installed SCCM client only had machine and user policy update, so could not check for Software Updates.
    However, I through web searches, I found a solution on another discussion here:
    https://social.technet.microsoft.com/Forums/en-US/1cefa9e0-a7f9-48d1-83b9-34d2293bab64/sccm-2012-r2-problem-with-device-deployment-user-deployments-ok?forum=configmanagerapps
    Basically the issue was described as a "corrupt PADBID in the database". A SQL query code detects if the issue is present, and another SQL code fixes the issue.
    What lead me to this fix was searching for this error in "CCMEXEC.LOG" online: "System task 'PolicyEvaluator_Unlock' returned error code 0x8000ffff".

Maybe you are looking for