Engine and NSMAdmin client refuse to install/work on DC

Hi,
I have a strange problem setting up Storage Manager 3.0.3 at a customer.
The customer has a server 2008 R2 64 bit DC especially for IDM purposes (IDM Remote Loader, Exchange tools for creating mailboxes and also intended to be the Storage Manager server for the creation of home directories after adding a user to AD by the IDM AD driver).
First i installed the Test environment. I tried to install Storage manage Engine and Admin console on the DC with a user that is member of domain admins, enterprise admins, schema admins.. the lot.
When i tried to logon to the Admin Console, the console gives me an error: authentication failed due to logon rights not being granted to the account. The admin console does NOT start with the rest of the setup and the user does NOT become part of the NSMAdmins group (the group is never created).
Well.. after a week of trying, i blamed the DC and installed in on a member server. It went well, the NSMadmin tool logged in correctly and the setup was continued. NSMAdmin group was created and everybody was happy.
This week i installed the QA environment. (Those are new clean servers) and guess what. EXACTLY the same problem. I did some additional testing by installing the engine and admin console on a member server + DC and tried cross-connecting:
- Connect from NSMAdmin client on member server to DC engine: Failed login, no Setup
- Connect from NSMAdmin client on DC to engine on member server: Failed login, no Setup
- Connect from NSMAdmin client on DC to engine on DC: Failed login, no Setup
- Connect from NSMAdmin client on member server to engine on member server: Success, install continues and asks for the license key etc.
All attempts where done:
- Using the same domain user
- Retried with a cleanly created domain admin user
- On server 2008 R2 64 bit (both DC as member server)
There is a clear relation to this topic:
http://forums.novell.com/novell/nove...ins-group.html
Can anyone tell me what's going on here. It seems that Storage Manager cannot be installed on a DC.

Hi,
> Can anyone tell me what's going on here. It seems that Storage Manager
> cannot be installed on a DC.
Do you have a forest with multiple domains?
Remember to specify the correct domain at logins and such, I remember
having some problems with that.. some things pointed to the wrong (root)
domain.
Our test environment has NSM on the the DC, in production we run NSM on
separate server.
sk

Similar Messages

In "Options" I do not have a default search engine and does not let me install one, how do I resolve it?

I don't have any serch engine, and if I want to install it from the web page, i click the "+ Add to Firefox" icon and it doesn't do anything. Also, if I write a web adrees at the adress bar, it doesn't work.
I've already tried to uninstall and install it again, and it doesn't fix it.

You can check if you have the XML files of the default search engines including Google in the browser\searchplugins folder in the Firefox program folder.
If not then you need to reinstall Firefox.
You can delete the Firefox program folder to do a clean reinstall.
You can find the full version of the current Firefox 36.0.4 release in all languages and for all operating systems here:
*https://www.mozilla.org/en-US/firefox/all/
Try to delete the search.json file and possible search-metadata.json and search.sqlite files in the Firefox profile folder to reset the search engines to the default.
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Firefox will rebuild the search.json file from the default search engines in the "browser\searchplugins" folder in the Firefox program folder and the searchplugins folder in the Firefox profile folder.
You can check for problems caused by extensions.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

I am trying to download and install itunes on windows 7. The download works fine and it appears that the install works fine as well but when it finishes itunes is nowhere to be found. I am in Mexico. Please help. Thanks

I am trying to download and install itunes on windows 7. The download works fine and it appears that the install works fine as well but when it finishes itunes is nowhere to be found. I am in Mexico. Please help. Thanks

You can try using this tool to first remove all traces of Reader from your computer:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you can download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else.

Upgrading to v7 didn't work and now can't re-install working v5...

Folks,
QuickTime Unavailable
X The QuickTime Plug-in requires the QuickTime
System extension version 5 or later
QuickTime is available from http://www.apple.com . quicktime.
OK Cancel
After upgrading to QT version-7 from version-5 I got the above error message every time I access a web-page that uses QuickTime... I’d get the spinning logo for a moment then a question mark ‘(?)’ in the center of the logo...
Windows Installer
! The configuration data for this product is . corrupt. Contact your support personnel.
OK
QT version 5 worked fine... Tried to restore version 5 and am now getting the above error msg. Can you help???
Thanks in advance for your response...
Regards,
P. Carlyle King
Homemade - Intel, X86 based PC Windows XP Pro A standard configuration

http://discussions.apple.com/thread.jspa?threadID=935452&tstart=120

Oracle Client 64-bit and Oracle Client 32-bit on the same server

Hi,
I have a Windows 2008 server 64-bit with Oracle Client 64-bit and Oracle Client 32-bit installed on different directories (D:\Oracle and D:\Oracle32)
Is it possible to define for certain applications to use the TNSNAMES entry from the 64-bit Oracle Client
and for other applications to use the TNSNAMES entry from the 32-bit Oracle Client
Once I installed the Oracle Client 32-bit (Oracle Client 64-bit version was already installed) and restarted the server I performed a TNSPING and it defaulted to the Oracle Client 32-bit installation path
Thanks,
Barry

Hello,
When you install a new client on a server, it will update the PATH variable, and add the ORACLE_HOME\bin path to it, at the first place. That explains why the tnsping use the last installed ORACLE_HOME.
What you can do if you want only to change the default path to the tnsnames is to set the environment variable TNS_ADMIN to the path where the tnsnames you want to use is located. You can modify this variable in your application if you want to use another tnsnames.
If you want switch from 32 bits to 64 bits client, then you have to modify the PATH variable.
Hope this will help.
Best regards,
Sylvie

OBIEE Installation and configuring Client tools.

Hi gurus,
I have installed OBIEE 11.1.1.6.0 and oracle 11g on Linux machine, and my client tools are installed on my local machine.
So know i need to configure both, suppose i have created a rpd file on my local machine and i want to create analysis in my OBIEE web console in Linux machine.
Actually i am quite new to OBIEE, so if you guys elaborate this step by step it would be helpful to me.
I really needed this help and i will really appreciate if you guys gonna help it.
Thanks & Regards
Ashok

Once you develop the rpd file deploy it on Linux box, follow steps as in http://obiee101.blogspot.com/2010/08/obiee11g-deploying-new-rpd.html
and then create reports
~ http://cool-bi.com

Upgraded and Migrated Clients Still Connecting To Old MP

I'm doing a migration from one site to another and I've just started with one ip range boundary. I did a discovery on the new systems and they all show up in my new site and the clients are getting installed. The only problem is that they are still connecting
to the old MP. I can see this in ClientLocation.log. What am I missing?
Orange County District Attorney

Hi,
Could it be that the SCCM clients in the old site was distributed uisng a GPO? That GPO is "tattoing" so you need to clear that value in the registry if that was used otherwise that will overwrite all ways to set/discover the
site code for a client.
Here is a post on the topic:
http://blog.coretech.dk/heh/new-agents-will-not-re-assign-to-configmgr-2012-site/
Also check which site have Boundary Groups configured for site assignment as well. that could alos cause this issue.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Why do I need instant client if I installed 11g1 and it works

sqldeveloper works
em works
sqlplus works
I have a problem with oci8, php 5.2.6, apache 2.2 ...all are installed and working
All the instructions I've found (and there are many) talk about
(1) Zend installs what I already have
(2) installing apache, oci8, php and instant client form scratch
I am NOT going to reduce a working system to scratch.
BTW my oci programs work and they have in the past worked through a client.

What Oracle Software is installed on the machine: client or server?
I concur that there is no need for Instant Client here, indeed it would be a bad idea.
Anything that works with Instant Client should also work with the regular client.
If you encounter any Oracle-specific error messages, feel free to post them and ask for an opinion (even though this forum is reserved for Instant Client, it might be an obvious problem).
Yours,
Laurenz Albe

Adobe update refuses to work for CS6 and Photoshop elements. App manager refuses to install.

Adobe update refuses to work for CS6 and Photoshop elements. App manager refuses to install. Support Advisor is of no help.Anyone had the same problem? It has all worked perfectly for some years now, but refuses this week.Has Adobe changed something.Windows 7.

Re: Adobe update refuses to work for CS6 and Photoshop elements. App manager refuses to install.
created by Pat Willener in Downloading, Installing, Setting Up - View the full discussion
What exactly means "refuses"?
This is the message which comes up if I try to update (from the Help menu) or re-install my licenced copies of CS6 or Photoshop Elements 9.
“We've encountered the following issues
Installer failed to initialize.Please download Adobe Support Advisor to detect the problem”
Get Adobe Support Advisor”
OR
on trying to open PhotoshopCS6 I get this message:-
“Adobe Application Manager required to start your trial, is missing or damaged.
Please download a new copy of Adobe Application Manager from http://www.adobe.com/go/applicationmanager_uk”
When I follow these instructions and try and start up/install or update Photoshop CS6 I get the same messages all over again. This has been going on since Tuesday afternoon and I am anxiuous to resolve the problem. For several years now all this has worked perfectly through your website and I cannot understand what has changed. Once I cancel these messages the products themselves seem to function OK. When I attempt to use Adobe Update Manager I get the same messages as above. You will see that my products are properly licensed and up to date. Have you any solution?

How to replace Bing and get Google back as my default search engine? I have already changed it in preferences and disabled extensions. Nothing is working!!

How to replace Bing and get Google back as my default search engine? I have already changed it in preferences and disabled extensions. Nothing is working!!

You installed the "Genieo" spyware/adware. There is an uninstaller, but as the developer is not trustworthy, you shouldn't rely on it. I suggest the tedious procedure below to disable Genieo.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Applications/Genieo.app
Right-click or control-click the line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator password.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Repeat with each of these lines:
/Applications/Uninstall Genieo.app
/Library/Frameworks/GenieoExtra.framework
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib
Note: Some of these items may be absent, in which case you'll get a message that the file doesn't exist.
The following configuration file is either created or modified by the Genieo installer:
/etc/launchd.conf
The file is unlikely to be used by anything but Genieo or something equally undesirable. Unless you know you need it, delete it in the same way as above. Otherwise, edit it to remove the line that begins as follows:
setenv DYLD_INSERT_LIBRARIES
The above is not a file, but a line inside a file.
Reboot. Safari should now launch without crashing. If not, stop here and post your results.
From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Uninstall any extension you don't recognize. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
The Genieo installer may also install the "Silverlight" web plugin from Microsoft. If you have no use for that plugin, you should remove it according to Microsoft's instructions. Don't remove it if you subscribe to "Netflix."
This procedure may leave a few files behind, but it should render Genieo permanently non-functional, as long as you never reinstall it.

How to install LV runtime engine and run .vi's in linux

I am attemtpting to load run time engine and run a .vi on Linux system.
Here is what I have done so far.
1. I don't have rpm on my system (gentoo) so I used the app on the install cd called INSTALL.norpm to install
labview70-rte-7.0.1.i386.rpm. It looks like it worked, there are a lot of files copied to /usr/local. A couple of .so files and a directory called Labview-7.0 (12M of files).
2. Made a test vi on other linux box that has full development system installed (also gentoo but i have rpm on this system).
    Do I need this application builder i keep hearing about to make an .exe or can I run vi's with this run time engine?
    What is the syntax to run a vi in linux? ./test.vi   ????
    Is application builder a seperate program that I must purchase?
When I attemp to run a vi I get garbage printing to the console, not unlike when you cat a binary file.
Any help would be appreciated. Is there instructions somewhare??? A manual perhaps that explains rte install and operation.
D.A.M.

You need the application builder to create an exe. The rte by itself will not run a VI. The exe does require the rte. It is possible to create a "loader" program that you can use to run separate VIs but the loader program must be created with the app builder. The app builder is a separate add-on or if you buy the professional version of LabVIEW, it comes included with that.

Is it possible to have 64-bit 11g Full Install and 32-Client on 1 computer?

Here's why I ask:
I have installed a full 64-bit 11g R2 install on my Windows 7 D: drive, installed two DB's, worked great. Then I realized application I need to support (Cognos 10.1) requires 32-bit client (for drivers) so I installed the 11g client also on D: drive as well (for space reasons).
My problem is that my registry only shows one ORACLE_HOME--the 64-bit full install whereas Cognos reqs to point to 32-bit client.
My sqlplus in the 64-bit OH worked fine (D:\oracle\app\dock\product\11.2.0\dbhome_1\BIN\sqlplus.exe) whereas the 32-bit client sqlplus (D:\oracle\client\app\dock\product\11.2.0\client_1\BIN\sqlplus.exe) did not work. The error was:
SQL*Plus: Release 11.2.0.1.0 Production on Mon Sep 26 18:02:30 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter user-name: cognos
Enter password:
ERROR:
ORA-12560: TNS:protocol adapter error
Any login id (sys, system, etc) gave same error. 64-bit sql-plus worked fine. If I opened a cmd prompt and navigated to the 32-bit sqlplus under the client this WOULD work to login (but then I noticed it was using the 64-bit ORACLE_HOME and PATH settings if I typed set). In order to fix Cognos, I changed my ORACLE_HOME and path to point to the 32-bit client (i.e. from D:\oracle\app\dock\product\11.2.0\dbhome_1 to
ORACLE_HOME = D:\oracle\client\app\dock\product\11.2.0\client_1
PATH = D:\oracle\client\app\dock\product\11.2.0\client_1\bin;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files\ThinkPad\Bluetooth Software\;C:\Program Files\ThinkPad\Bluetooth Software\syswow64;C:\Program Files\Intel\WiFi\bin\;C:\Program Files\Common Files\Intel\WirelessCommon\
Guess what? This stopped both the 64-bit and 32-bit sqlplus from working, even after bouncing the computer. Now the listener (64-bit) OracleOraDb11g_home1TNSListener will also not start either.
Sooooo, I think I need to set the OH and PATH back to the 64-bit as that is what the Listener requires but any ideas how to get the 32-bit sqlplus to also work?!? The Cognos application appears to use the default server settings (most likely from ORACLE_HOME and Path) and in it I just type the name of the database and connection string, there's no real way to point it anywhere to differentiate. If it doesn't find 32-bit drivers it throws an error hence the reason I need the client sqlplus, etc to work.
Thanks in advance for any help!
Dave
Edited by: lo**** on Sep 26, 2011 4:20 PM

Duplicate post.
{thread:id=2290122}

IMac at work, iMac at home. (Latest Yosemite and Apple Remote Desktop updates installed) Need to work from home at night. I don't know how to set my permissions so that I can just control my iMac at work.

iMac at work, iMac at home. (Latest Yosemite and Apple Remote Desktop updates installed) Need to work from home at night. I don't know how to set my permissions so that I can just control my iMac at work.

If they have set up port forwarding for you already then that is different. In that case, then you could be experiencing the bug with the most recent release of ARD (3.7.2) and in particular ARD 3.7.2 and Yosemite ARD version 3.8 clients. It has been reported numerous times in the forums and to Apple that since 3.7.2, clients are frequently unavailable to connect to despite there being no network issue between the remote computer and client computer. I have not seen anyone report it who was working from outside the LAN to inside the LAN, but I have the same issue with a number of my own computers that are simply on a different subnet, so it stands rot reason that it would happen from a port forwarding location.
I am sometimes able to resolve the issue locally by SSH connecting into the client computer using Terminal on my admin machine and restarting or relaunching the ARD agent on the remote device, then trying to connect to it again after about 30 seconds.
The Terminal commands for this procedure are as follows, though you might need to include a port number from outside the LAN:
First:
ssh ipaddress -l adminusername
(example: ssh 192.168.1.1 -l macadmin)
Second:
sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -restart -agent
After that, waiting about 30 seconds and trying to observe or control usually works, though the computer may still fail to show an online or lit-up status indicator.

Install Creme and MI Client on SD Card

Hi All,
Due to low memory in my device, I have tried install creme and mi client on SD card follwing the below instructions suggested by some one.
+Refer the steps mentioned below for MI Client + CreMe on SD Card.....+
Installing MI and data on SD ROM:
1. Copy the CrEme cab and the MI cab on to the device and install them. Register the MI Client.
2. Assign the application/addons/patches to the device, sync to get the appliation along with the data. (I have copied whole MI folder which is working in another device having db2e etc and data)
3. Move the CrEme folder present in WindowsCrEme to the SD Card directory.
4. Move the MI folder to SD Card directory.
5. Move the following dlls present in Windows to SD CardCrEme in
CryptoPlugin.dll
DB2e.dll
DB2eJDBC.dll
gfw.dll
gfwconf.dll
jscp.dll
jscpconf.dll
License.dll
6.Edit the crème_listOfJars.txt which is present in SD CardMI, change all the paths which are present in it to point to the new path. eg. MIlib ME.jar to SD CardMIlibME.jar. Also add a (quote) after -classpath and also at the end.
ie. classpath SD CardMIlibMDSD2.0CD.jar;SD CardMIlibdb2ejdbc.jar;SD CardMIlibME.jar;
7.Move the MobileEngine.lnk file present in WindowsStartUp to SD Card
8. Edit MobileEngine.lnk file. The new content should be as given below:
+255#"SD CardCrEme inCrEme.exe" -Of -ml 64000 -bcp 'SD CardMIlibSapBigDecimal.jar' -cf 'SD CardMI
lfont.txt' -cf 'SD CardMIcreme_listOfJars.txt' com.sap.ip.me.core.Startup '-home:/SD Card/MI'+
9. Click on the MobileEngine.lnk file
10.CreMe and MI should load.
But when I gave the URL "http://localhost:4444/me...." a pop up message displaying as Cannot Connect with current connection settings. To change your connection settings, tap settings.
Can any please suggest how to install these in SD card.
Regards,
Murthy.

Hi Murthy,
this error is a usual thing!
You installed MI on the SD card. Problem with the WinCE operating system: the files in the startup folder are processed, before the SD card is available. So you want to start Creme, but the creme is on SD card and the sd card is not available. Unfortunately this is the problem.
Well, either you start the MI link manually after restarting the PDA from the startup folder. When you can do that the SD card is available as well and then it should wor fine. If it is not working, then you have done some errors in the configuration (misstypo), but usually ths is the problem. Make t worse: this error occures only in 90% of the PDAs, 10% of the PDAs work absolutely fine
On the other hand, use it like Victor said - but even then you could run into problems, cause Creme tries to start files in the MI folder. But cause Creme itself needs some time to init, usually this works fine.
Hope this explains you the reaon of your problem.
Regards,
Oliver

TS1702 Every time I try to install an app of the App Store. The iPad refuses to install it and it just says waiting... For hours. Is there a way to fix this problem?

I am unable to install any applications from the App Store. Every time I try to install an app the iPad refuses to install it and it just says waiting... For hours. Is there a way I can fix this? If so, how?

I have posted these suggestions many times in the iOS forum and a number of these things have worked for other is the past. Maybe one of them will work for you.
Tap the "waiting" icon and see if you can pause it. If it does pause, then tap it again and see if it will resume. If that works, repeat the same steps for each "waiting" icon.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

Engine and NSMAdmin client refuse to install/work on DC

Similar Messages

Maybe you are looking for