Engineering change management with parameter effectivity

In Engineering change management
i have activated parameter effectivity &
defined parameter profile for DATE,SERNR,Kombi1-Customer(combination of Date & Customer name- Kunnr) in IMG settings
i am able to work with Date & SERNR But when i choose kombi1
i am getting the following error message
"No entries in database for object KUNDE_LO table AEEF"
i checked with table AEEF thier is no field KUNDE_LO
How to customize effectivity type Customer
is there any thing i have missed ....

Kunde_lo is a data element.
but i am not able to locate it in my SAP

Similar Messages

  • Engineering change management working with parameter effectivity

    In Engineering change management
    i have activated parameter effectivity &
    defined parameter profile for DATE,SERNR,Kombi1-Customer(combination of Date & Customer name- Kunnr) in IMG settings
    i am able to work with Date & SERNR But when i choose kombi1
    i am getting the following error message
    "No entries in database for object KUNDE_LO table AEEF"
    i checked with table AEEF thier is no field KUNDE_LO
    How to customize effectivity type Customer
    is there any thing i have missed ....

    Hi Srinivas,
    KUNDE_LO is a data element , what ever kombi1 is defined i think that does not have any values maintained in the system.
    or
    Check whether any user exits or BAPI's used bringing the customer specifications.
    You can also check the data element existence u might have done that .....
    Reward if useful
    Thanks,

  • Is there a relation between the Engineering Change Management and MM

    Hi SAP MM Gurus,
    Is there a relation between Engineering Change Management and Materials Management? I know we get the versions changes updated in Material Master. But do not know where is the origin for ECM. Step by step configuration is appreciable.
    Thanking in Advance.
    with regards
    Ravi Babu

    Hi ,
    I have created an application and have created end users also who will be using this application. For each of these users i have to give access to application in such a way that they will be able to see only their area a work. So how do i do this ..this needs to done based on the login user_name..my question now is how or from where will i get the current session details like user_name, current session id ,current session date and time?
    Thanks in advance,
    Bhargavi

  • PLM - Engineering Change Management - ABAP Development

    Engineering Change Management
    Program: SAPMC29C
    Transaction:CC02
    Change Master Valid From date once expired (Protected Time Period) – Not able to change by the user
    Requirement is to change the valid from date to New date from custom program even if it is expired to over right existing protected date
    Let me know if any enhancement to change the validity date by restricted user
    I required step by step ABAP development required for  this change - pls help with your experience on PLM CC02 - Vaildity date change
    Screen shot attached

    Pass the following fields on input structure IN_AENRB:-
    MANDT                          xxx                         "Client
    AENNR                          123456789ECM
    AENST                          41                            "Change no. status should be 41
    AENBE                          PLANT
    DATUV                          08/22/2014               "New valid from date
    AETXT                          ECM DESCRIPTION
    FLUSE                          X
    AEDIF                          xxxxxxxxxx               "Get from AENR table for this ecm
    VBKZ                           U

  • Engineering Change management SPRO

    Dear Experts,
    Does any body know what is "Define output format for change number" in SPRO --> Cross Application components --> Engineering change management --> Define output format for change number.
    When I try to execute I dont see it allowing me to enter / change any details there. It just gives a screen with no values.
    I am trying to see if this helps to define alpha numeric format for internal change number.
    Thanks
    Vennela

    Hi
        this functionality is to Define Input and output length of change number and for template for output of change number if required . For creating new entries in menu bar goto EDIT - > New Entries
    Regards
    Neelima

  • Engineering change management for materials in MDM

    Hi,
    we want to replace a home-made material master data system by MDM, but need some Engineering Change Management functions like
    - versions of material
    - release dates
    - different release dates in relation to different factories (i.e. client systems)
    Any idea, how this could be handled in MDM ?
    Michael Tegethoff
    KONE GmbH

    Hello Michael:
    All of that information you mention can be included on MDM as plain attributes on the Materials table.
    As for Versions, if materials are updated thru MDM Import I'd suggest  include the new version number and as import action choose "Update all mapped fields", that is, while importing the old version number will be updated.
    for different release dates you can maintain as many date attributes as Factories you have. When harmonizing data (syndicating) you can map each factory to its correspondant release date, so the other factories won't even "notice" the other dates.
    Please let me know if that helped at all.
    Greetings!
    Alejandro

  • CS14 without the use of Engineering Change Management

    Hi all,
    everybody knows if the date of validity showed in the entering screen of TCODE:  CS14, lets the comparison between BOM at different date, even if the Engineering Change Management isn't implemented for a plant?!
    TKS
    Valentina

    If you don't use ECM then the change log is not such detailed and the validity dates will be firmed for one BOM item, so it may hard to compare the BOM on certain date without the ECM.

  • Difference  Between Order Change Management & Engineering change Management

    Dear,
    What is the Difference  Between Order Change Management & Engineering change Management ?

    Hi,
    ECM will help for Master data changes management.
    OCM will help to manage changes in Transaction Data like Production Orders.
    In brief,you have to first Create Change Number(part of ECM activity).then using that Change number, Master data(like BOM, Routing etc) has to be modified.
    Then through OCM affected Transaction Data(like Production Orders) for each change number to be Processed.
    Regards
    R.Brahmankar

  • Continuous change management with SolMan?

    Hello,
    I wonder wether it is possible do run a continuous change management with Solution Manager for all changes I want to implement in a System?
    What I need is a solution to manage all the common change requests and not only for single projects.
    Can you help me?
    Thanks in advance
    Bye

    yes it is possible across the project using Quality Gate management in EHP1 version
    http://help.sap.com/saphelp_smehp1/helpdata/en/a9/0473a0d3f74adcaa6c6b4be7635867/frameset.htm
    Quality Gate Management gives you an overview of the status of the software distribution of your projects. It gives an integrated and consistent overview of the implementation of changes to your SAP software solution, for all operational units of the various organizations in a company. This increases the transparency of the software change process.
    Quality Gate Management combines different software developments in one logical structure. These developments are in turn collected in projects. You can organize and monitor the distribution of software by projects and their changes.
    http://help.sap.com/saphelp_smehp1/helpdata/en/a9/0473a0d3f74adcaa6c6b4be7635867/frameset.htm
    The prerequisites for setting-up quality gate management are:
    Assign quality gate management roles
    Configure the system landscape in the Transport Management System (TMS)
    Create a project in the Project Administration and enter required data in Quality Gate Management.
    also check this note
    Note 1256490 - General note for Quality Gate Management (QGM)
    Hope it solves ur doubt
    Regards
    Prakhar

  • Engineering Change Management - Effectivity Types

    Hello Forum members,
    we want to make our BOM Engineering Changes being dependent from material stocks.
    The process is the following: A BOM material shall be exchanged only after the old material's stock is depleted, e.g. a steel holder shall be replaced by a aluminum holder only after the existing stock of the steel holder is depleted. The use of a fixed date is therefore not helpful.
    We are thinking about how we could implement this dynamic Effectivity Type that is linked to the MM inventory. Has anybody ever done such thing or something comparable? Any ideas of how this could be done?
    Thanks for your suggestions!
    Marcus

    Hi Marcus,
    Actually you need to 2 separate things to get what you want:
    1) use discontinuation functionality (MRP 4 view) to use existing stock when you a follow up material, or a group of follow up materials. This means that the system will not generate new supply elements for the discontinued material, but use all the existing supply. In this stage the BOM is not changed yet.
    2) after the stock is used up, or when you get a clear picture from planning and (1) on the date when it happens, then you create an ECM with that date and change the BOM accordingly.
    Regards,
    Mario

  • BOM Validity - Using Engineering Change Management

    Hello All,
    We are currently reviewing the ECM functionality to assistn in BOM validity maintenance. I have made the necessary changes in SPRO to activate this functionality. My initial testing utilizing the Change Master and associating it with the BOM works fine. However, the question I had was more around having to make retroactive changes. I noticed that the system using the Entered or Created date from the transaction to determine the BOM validity. Is there anyway to influence the BOM validiy to look at document dateof the transaction instead of entered date? Has anyone run into this type of issue before?
    Thanks for your help.
    Gus

    Hi Krishna,
    You can use change numbers to change independent (recipe) formula in the PLM-Recipe Management.
    The object formula is assigned to the object type specification (type 60 of the change management).
    For the object type specification the use of the object management record is not supported in the SAP standard.
    Only the change documents are available.
    Best regards,
    Roland Freudenberg

  • BO Data Services Change Management with SAP Charm Functionality

    HI Gurus,
    We have been tasked with automating the Change Management activity for Business objects data Services. The same is currently performed as a manual task which could be prone to errors. We have researched all over the place and we have not been able to find any documentation on in order to carry out this activty through Solution Manager ChaRm functionality.
    So, Can SAP Solution manager perform the LCM (Life Cycle management) for Business objects Data Services via means of it CHaRm functionality?
    Right now we know that the components for BO are present on Solution manager within the SMSY transaction. We have also been able to create the complete landscape within the same and create a project template for it.
    Now the challenge is how do we configure ChaRm in order to move the DI code from one repository to the next?
    here are the requirements we are trying to implement:
    1. Create a full landscape for Business Objects Data Services within SMSY in Solution manager
    2. Create Project template for Business objects Data Services
    3. Create RFC connections to Database and BODS Client Servers
    4. Configure Charm in order to automate Change Management for Data Service
    Please advice.
    Thanks,
    Nat Hernandez
    SAP BO/BW Technical Architect

    Hi Natanael
    I am also looking for the same
    Would you please let me know how did you implement this

  • Change Rule 3 (with Engineering change order with change type)

    A customer created a recipe with Change Rule 3. Can you still change a recipe that has this setting?  What needs to be done if a change has to be done on the recipe?  Thanks!

    Hi Kevin,
    the change rule You described requires an engineering change order (ECO) with a change type for objects. Without ECR You can not change that recipe anymore.
    1) You need to crate an engineering change request (ECR) with transaction CC31
    2) In this ECR You need to create an entry in the "objects" section for "TL" with Your task list type, receipe group and with a change type
    3) In header of ECR You need to change the status to "check ECR"
    4) Go back to objects section, mark You object and choose function "Edit -> Object Status -> Change Possible"
    5) Go back to header and change the status subsequently to "ECR checked", "approve ECR" and "convert ECR"
    6) Save
    7) Go to C202 or C223 and use this ECR number to change Your master data
    Alternative B)
    If Your customer enterd this recipe with change rule by accident and does not intend to user ECM functionallity just delete the recipe using TC C298.
    Best Regards
    Wolfgang

  • Material field not apprearing with parameter effectivity.

    Hey SAP experts,
    We are using serianumber parameter effectivity in ECR. Now we have one small issue the column material is not appearing next to the columns upper limit serial number and lower limit serial number.
    I tired all the SPRO settings and MM settings, basic settings field selection etc....but nothing worked out....
    Can i get some help here please
    regards,
    satish

    Hi Srinivas,
    KUNDE_LO is a data element , what ever kombi1 is defined i think that does not have any values maintained in the system.
    or
    Check whether any user exits or BAPI's used bringing the customer specifications.
    You can also check the data element existence u might have done that .....
    Reward if useful
    Thanks,

  • Engineering Change managment

    Hi
    Please help me with this.
    I am using Change number:  CN0000005387 for IAP 2.0 (FAP9010258/1 and FAP9010259/1) package. Future date 03.07.2028
    And using Change number: CN0000005234 for ECDS4.0(FAP9010669, FAP9010759 and FAP 901 0808) with future date 28.05.2028
    My problem is I have by mistaken used change number CN0000005234 while updating IAP2.0 and with this change number I have just added one procedure to AGO configuration Profile. And this is completely a new package.
    How can I separate these packages from each other because I cannot release IAP 2.0 and I am not suppose to ECDS4.0.
    Sarika

    Hello Sarika,
    Once you have used the change number, we cannot undo, since it's master data change.  But we have 2 options
    Option1: Shift the date as required in the change number. But all the relevant objects will move, which probably you would have tried.
    Option2: For a specific change number you can have multiple effective date, I mean object specific. I have used this function longtime back. But only check required is, can we use it for a change number which has created object managment record. Which is your specific reqmt.
    Reg
    Samson

Maybe you are looking for