Engineering, Services and Knowledge International Conference AW
THE BODY OF THE THREAD/POST:
Our apologies if you receive multiple copies of this Call for Papers
======================================================================
Management Track within WiCOM
International Conference on Engineering, Services and
Knowledge Management (EMS 2008)
CALL FOR PAPERS
http://www.wicom-meeting.org/ems/
Dalian, China September 21-23, 2008
======================================================================
This conference is sponsored by IEEE Engineering Management Society,
IEEE Communications Society and Dalian University of Technology. All
papers accepted will be included in IEEE Xplore and indexed by EI. For
more information, please contact: [email protected] See you in the most
beautiful beach city of China!
I have been developing test and measurement systems for over 20 years and am sure I can do a great job for you.
I am located in Northeast Ohio.
Would I be able to do the work remotely at my site?
I have attached a fact sheet which describes some of the projects I have developed.
I have a great deal of experience with measurement lasers, aircraft engine testing, industrial systems, and quality assurance testing.
Attachments:
IS 071410a .pdf 253 KB
Similar Messages
-
I ran SQL Server 2012 express setup as user with administrator privileges and still it's failing to install "Database Engine Service" and "SQL Server Replication".
Any and every ideas on how to resolve this issue is greatly appreciated.Three weeks passed and I am yet to find a fix for the the failed installation of the database engine on sql server 2012 express installation. I have tried various work-around including uninstalling, deleting all the directory paths, and reinstallation. Still
not able to successfully install sql server 2012 express.
I will greatly appreciate any and every contribution towards resolving this issue. Thanks in advance.
Here is the content of log file after the latest failed installation:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893607
Start time: 2013-12-23 14:42:45
End time: 2013-12-23 15:07:51
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: mymachine1
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2012 SQLEXPRESS_GT MSSQL11.SQLEXPRESS_GT Database Engine Services
1033 Express Edition 11.0.2100.60 No
SQL Server 2012 SQLEXPRESS_GT MSSQL11.SQLEXPRESS_GT SQL Server Replication
1033 Express Edition 11.0.2100.60 No
SQL Server 2012
Management Tools - Basic 1033 Express Edition
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: C:\9b6607e524727c7fe1defd80\x86\setup\
Installation edition: Express
Slipstream: True
SP Level 1
Product Update Status:
Success: KB 2674319
Product Updates Selected for Installation:
Title: Service Pack 1
Knowledge Based Article: KB 2674319
Version: 11.1.3000.0
Architecture: x86
Language: 1033
Update Source: MU
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, CONN, BC, SDK, ADV_SSMS, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: <empty>
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Manual
SQLSYSADMINACCOUNTS: MH\gt038676t
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131223_144132\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xE53883A0%400xBE03358B%401306%4025&EvtType=0xE53883A0%400xBE03358B%401306%4025
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xE53883A0%400xBE03358B%401306%4025&EvtType=0xE53883A0%400xBE03358B%401306%4025
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131223_144132\SystemConfigurationCheck_Report.htm -
Database engine services and sql server replication failed in installation
hi im trying to setup sql server on my laptop but it says the 'database engine services' and 'sql server replication' have failed due to some specified module being missing can anyone help me out?
log file:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2147467259
Start time: 2015-03-17 10:47:47
End time: 2015-03-17 11:08:11
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: SHARI
Machine processor count: 2
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services
1033 Express Edition 10.1.2531.0 No
SQL Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication
1033 Express Edition 10.1.2531.0 No
SQL Server 2012
Management Tools - Basic 1033 Express Edition
11.0.2100.60 No
SQL Server 2012
LocalDB 1033
Express Edition 11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: c:\efa3a640a9b59ee651913f55719bf3b1\x86\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Manual
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: c:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTANCEID: SHARIINSTANCE
INSTANCENAME: SHARIINSTANCE
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SHARIINSTANCE
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: SHARI\Shari Donald
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: true
Configuration file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20150317_104244\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The specified module could not be found.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xEC717F7D%400xC24842DB&EvtType=0xEC717F7D%400xC24842DB
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The specified module could not be found.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xEC717F7D%400xC24842DB&EvtType=0xEC717F7D%400xC24842DB
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20150317_104244\SystemConfigurationCheck_Report.htmHello,
As per the log details shared, installing version is SQL server express. Please go to control panel - add and remove programs and uninstall the
SQL Server Database Engine Services Instance Features, and also Uninstall all SQL Services.
Reboot and start the start the installation with RUN as Administrator.
Thank You.
Regards, Pradyothana DP. Please Mark This As Helpful if it helps to solve your issue. ========================================================== http://www.dbainhouse.blogspot.in/ -
Does apple provide service and repairs internationally?
I am presently in the US and about to purchase iPhone 5s in the coming week. In November I am moving to India for some work. After going through the apple communities I have found that Apple is not providing international warranty. So if that's the case will they provide service and repair if I am ready to pay for it? (considering the warranty is not applicable in some other country)
Thanks.No, Apple India will refuse to work on an iPhone purchased in the US -
either under warranty basis or as paid repair. They will not have any
replacements for iPhones from other markets (iPhones are generally
replaced except for a few repairs that are made in individual - not all -
Apple locations. Buy your iPhone in India when you get there to avoid
problems. -
Customer service and knowledge
I called customer service to inquire about a cable that may connect a card reader or flash drive and was told there are no cables for sale at Apple for a mini ipad 2.
I'm pretty sure there arehttp://store.apple.com/uk/product/MD822ZM/A/lightning-to-sd-card-camera-reader?f node=3a
http://store.apple.com/uk/product/MD821ZM/A/lightning-to-usb-camera-adapter?fnod e=3a -
Using DNS Services on an internal network and still using an outside DNS
I have just started using Mac OSX Server for the first time and I am trying to set up an internal DNS server so I can set up an LDAP Directory master and replica. However, I am running into some problems in setting up the DNS server on our network.
This is where it gets a little confusing to me here and i have to explain some things. We have a shared web hosting ISP, which means that our mail services and web hosting services are not hosted on site. To access our mail services using a FQDN I would point Outlook to mail.xxx-xxx.net. However, I want to use that domain, xxx-xxx.net, as our internal network as well because it is the name of our company.
I can get all of the DNS names to propogate to their assigned IP's on the internal network and can ping everything using fully qualified domain names, but whenever I go to use services such as mail., it cannot find the server which is hosting that service because it is obviously not on our internal network. This makes sense that I cannot ping it, but how do I set up the alias mail.xxx-xxx.net to point to the ip address of the mail servers hosted by our ISP instead of something hosted on our internal network?
Sorry I can't clarify better, I'll try some cliff's instead;
1) Trying to set up internal dns server so I can use LDAP Directory Master and Replica Services.
2) The domain, xxx-xxx.net is currently being used for web hosting and mail services not hosted at our site.
3) Want to use the domain xxx-xxx.net as our internal domain because it is the name of our company, and eventually we will be hosting our own content.
4) Can set up internal DNS server and get all IP's to propagate just fine, but services such as mail.xxx-xxx.net cannot be used because they are not hosted on the internal network.
5) How do I set up DNS to point certain services to point to an external DNS servers, or to the IP address of the server itself so I don't have to use the ip address i.e. mail.216.256.33.24?Ok I got it
Here's my walkthrough for all the other tormented souls, that might find this thread and require help:
Introduction:
Internet-card: ra0 192.168.16.64
Internet-gateway, nameserver 192.168.16.1
local-network-card eth1 192.168.15.1
[1] modprobe capabilty
-> /etc/rc.conf
[2] pacman -S
* dhcpd (DHCP daemon)
* bind (Berkeley Domain Name Server)
[3] vi /etc/dhcpd.conf
ddns-update-style ad-hoc;
option domain-name "example.org";
option domain-name-servers ns1.example.org, ns2.example.org;
default-lease-time 600;
max-lease-time 7200;
subnet 192.168.15.0 netmask 255.255.255.0
# --- default gateway
option routers 192.168.15.1;
option subnet-mask 255.255.255.0;
option broadcast-address 192.168.15.255;
option domain-name-servers 192.168.15.1;
range 192.168.15.2 192.168.15.254;
default-lease-time 21600;
max-lease-time 43200;
[4] vi /etc/named.conf
acl micro
192.168.15.0/24;
options {
directory "/var/named";
pid-file "/var/run/named/named.pid";
auth-nxdomain yes;
datasize default;
allow-query{ micro; };
allow-recursion { micro; };
[5]
/etc/rc.d/dhcpd start
/etc/rc.d/named start
-> rc.conf
[6] iptables
vi /etc/sysctl.conf
net.ipv4.ip_forward = 1
iptables -t nat -A POSTROUTING -o ra0 -j SNAT --to 192.168.16.64
iptables -A INPUT -j DROP -m state --state NEW,INVALID -i ippp0
iptables -A FORWARD -j DROP -m state --state NEW,INVALID -i ippp0
make it a script that is run in /etc/rc.local -
i have developed a very small web service and which is hosted along with our web site. our webservice url is
http://www.bba-reman.com/Search/SearchDataIndex.asmx
web service code
namespace WebSearchIndex
#region SearchDataIndex
/// <summary>
/// SearchDataIndex is web service which will call function exist in another library for part data indexing
/// </summary>
[WebService(Namespace = "http://tempuri.org/")]
[WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)]
[System.ComponentModel.ToolboxItem(false)]
// To allow this Web Service to be called from script, using ASP.NET AJAX, uncomment the following line.
// [System.Web.Script.Services.ScriptService]
public class SearchDataIndex : System.Web.Services.WebService
//public AuthHeader ServiceAuth=null;
public class AuthHeader : SoapHeader
public string Username;
public string Password;
#region StartIndex
/// <summary>
/// this function will invoke CreateIndex function of SiteSearch module to reindex the data
/// </summary>
[WebMethod]
public string StartIndex(AuthHeader auth)
string strRetVal = "";
if (auth.Username == "Admin" && auth.Password == "Admin")
strRetVal = SiteSearch.CreateIndex(false);
else
SoapException se = new SoapException("Failed : Invalid credentials",
SoapException.ClientFaultCode,Context.Request.Url.AbsoluteUri,new Exception("Invalid credentials"));
throw se;
return strRetVal;
#endregion
#endregion
when i was calling that web service from my win apps using
HttpWebRequest
class then getting error The remote server returned an error: (500) Internal Server Error
here is code of my win apps from where i am calling web service
string strXml = "";
strXml = "<s:Envelope xmlns:s='http://schemas.xmlsoap.org/soap/envelope/'><s:Body><StartIndex xmlns='http://tempuri.org/' xmlns:i='http://www.w3.org/2001/XMLSchema-instance'><auth><Username>joy</Username><Password>joy</Password></auth></StartIndex></s:Body></s:Envelope>";
string url = "http://www.bba-reman.com/Search/SearchDataIndex.asmx";
HttpWebRequest req = (HttpWebRequest)WebRequest.Create(url);
req.Method = "POST";
req.ContentType = "text/xml";
req.KeepAlive = false;
req.ContentLength = strXml.Length;
StreamWriter streamOut = new StreamWriter(req.GetRequestStream(), System.Text.Encoding.ASCII);
streamOut.Write(strXml);
streamOut.Close();
StreamReader streamIn = new StreamReader(req.GetResponse().GetResponseStream());
string strResponse = streamIn.ReadToEnd();
streamIn.Close();
i am just not being able to understand when this line execute
StreamReader streamIn = new StreamReader(req.GetResponse().GetResponseStream());
then getting the error The remote server returned an error: (500) Internal Server Error
not being able to understand where i made the mistake. mistake is in the code of web service end or in calling code?
help me to fix this issue. thanksHi Mou,
I just tried your win app code about calling web service, but failed. I got the 500 error after I called your service:
The error message I quoted from Fiddler:
<?xml version="1.0" encoding="utf-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><soap:Body><soap:Fault><faultcode>soap:Client</faultcode><faultstring>System.Web.Services.Protocols.SoapException: Failed : Invalid credentials ---> System.Exception: Invalid credentials
--- End of inner exception stack trace ---
at BBAReman.WebSearchIndex.SearchDataIndex.StartIndex(AuthHeader auth)</faultstring><faultactor>http://www.bba-reman.com/Search/SearchDataIndex.asmx</faultactor><detail /></soap:Fault></soap:Body></soap:Envelope>
I am not totally sure that error occurred by the authentication. But I suggest you can try to add this service into your project using this method below:
1.right click the Reference and select Add Service Reference
2.input your service link and click "Go"
And you can use this service as the following:
private async void callService()
ServiceReference1.SearchDataIndexSoapClient client =new ServiceReference1.SearchDataIndexSoapClient();
var Str= await client.StartIndexAsync(new ServiceReference1.AuthHeader { Username = "Admin", Password = "Admin" });
Please try it.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Web Services and Internal Tables.
Hi.
In the next days I will need to create a program to consume a Web Service that is going to return data like an internal table, I mean...
Field1a | Field2a | Field3a
Field1b | Field2b | Field3b
Field1c | Field2c | Field3c
Do you have any ABAP example of consuming a Web Service and receiving data into an internal table?
Thanx in advanced.
Edited by: urjose on Jun 19, 2008 8:47 PMHello,
Maybe this links will give you a hint.
/people/thomas.jung3/blog/2005/01/05/develop-a-web-service-that-sends-an-email--in-abap
http://help.sap.com/saphelp_nw04/helpdata/en/e9/ae1b9a5d2cef4ea4b579f19d902871/content.htm
Bye
Gabriel P.- -
Use of KM services and TREX Search Engine From share point portal
Hi All,
We would like to Use of KM services and TREX Search Engine From share point portal.
For this purpose we interoperability between windows sharepoint and SAP Portal.
Please provide necessary documents or suggestions for interoperability for above requirement.
mail id : <b>[email protected]</b>
Thanks in advance
Regards
Swarna BHi,
See this this links:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e891378-0601-0010-5386-a3387f1b161b
Regards,
Senthil K. -
How can I synchronize directory service and bpm engine?
hi,all
I'm using bpm WL 10.3.1 with papi.
Now I want to assign role to participant in process.
I use DirHumanParticipant.setRolesAssignment() and DirHumanParticipant.update() to assign role dynamically.
But it does not work.
Actually, when I log in to the webconsole. The role has assigned to the participant.
but when I log in to the workspace. I cannot find expect task in my work items.
In the history view I can find it.
Then I remove the role that i assigned previous and assign again in the webconsole.
After that I log in to the workspace, now i can get the expect task in my work items.
I think it need to synchronize between directory service and bpm engine. but I don't how to do it?
Is there any way to do it with some api?
thanks
regards
kenshinHi!
Here is how it works:
1. The engine polls the directory periodically and checks if some changes were made to the participant role assignments.
The poller frequency is configured on the Process Administrator.
2. When a change is detected, the engine updates the information on the engine partcipant cache.
However, if the participant is logged it, the update operation is postponed until the participant logs off.
3. After checking the directory, the engine directory poller sends a notification to all the PAPI clients (including the Workspace)
and the workspace side poller updates the participant assignment you see in the workspace.
The notification mechanism is using the JMS Topic on the JEE version of the BPM.
- First of all verify you are logged out when you add/remove the role.
After that, wait 1 minute or the time specified in the Process Admin as the directory poller frequency.
- Verify the JMS Topic is defined correctly. Check the engine log for any JMS Topic related error.
Hope it helps. -
Coldfusion 11 Web Services and SSL Issue
Our company has two web services that we host that a vendor uses to grab information from on a periodic basis. These services ran fine on a CF8 SSL site, but once we switched to 11, the services can no longer be created. However, I can create them on our unsecured test site (which also is running CF 11) and access them externally without issue. When I try to create the webservice in the url, I just get a blank page back instead of the XML I should be getting. Is there something special I am missing that has to be done to create web services in a secure environment? The raw error message I get when trying to invoke the secure web service is below:
coldfusion.xml.rpc.XmlRpcServiceImpl$BadWsdlXMLException: Unable to parse WSDL as an XML document. at coldfusion.xml.rpc.XmlRpcServiceImpl.retrieveWSDL(XmlRpcServiceImpl.java:976) at coldfusion.xml.rpc.XmlRpcServiceImpl.access$000(XmlRpcServiceImpl.java:96) at coldfusion.xml.rpc.XmlRpcServiceImpl$1.run(XmlRpcServiceImpl.java:309) at java.security.AccessController.doPrivileged(Native Method) at coldfusion.xml.rpc.XmlRpcServiceImpl.registerWebService(XmlRpcServiceImpl.java:302) at coldfusion.xml.rpc.XmlRpcServiceImpl.getWebServiceProxy(XmlRpcServiceImpl.java:692) at coldfusion.tagext.lang.InvokeTag.doEndTag(InvokeTag.java:469) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2987) at cfcallmattersearch2ecfm1244659485.runPage(D:\Web\sims\st\callmattersearch.cfm:9) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:246) at coldfusion.tagext.lang.IncludeTag.handlePageInvoke(IncludeTag.java:734) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:570) at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65) at coldfusion.filter.IpFilter.invoke(IpFilter.java:45) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:487) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:42) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:141) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:94) at coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:78) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:58) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:62) at coldfusion.CfmServlet.service(CfmServlet.java:219) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:303) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 ) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:241) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:122) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:501) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:116) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:422) at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:198) at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.jav a:607) at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:313) at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source) at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source) at java.lang.Thread.run(Unknown Source)I've got this working on our dev and test servers. Now I'm trying to deploy it to production. We have an external prod server in a DMZ that calls the web service on our internal prod server. We only have port 443 open in the firewall between these two servers (not port 80). I am able to do a <cfhttp> call to the WSDL over 443 and get back the xml. However, if I make the web service call using <cfinvoke> I get the following error:
Cannot perform web service invocation getNthDayOfMonth.
The fault returned when invoking the web service operation is:
org.apache.axis2.AxisFault: Connection refused
at org.apache.axis2.AxisFault.makeFault(AxisFault.java:430)
at org.apache.axis2.transport.http.HTTPSender.sendViaPost(HTTPSender.java:197)
at org.apache.axis2.transport.http.HTTPSender.send(HTTPSender.java:75)
at org.apache.axis2.transport.http.CommonsHTTPTransportSender.writeMessageWithCommons(Common sHTTPTransportSender.java:402)
at org.apache.axis2.transport.http.CommonsHTTPTransportSender.invoke(CommonsHTTPTransportSen der.java:231)
at org.apache.axis2.engine.AxisEngine.send(AxisEngine.java:443)
at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:406)
at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java :229)
at org.apache.axis2.client.OperationClient.execute(OperationClient.java:165)
at standard.StandardDate_functionCfcStub.getNthDayOfMonth(StandardDate_functionCfcStub.java: 192)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorI... ''
I am able to successfully call the same web service (on the internal prod server) using the same code from my internal dev server. However, when I look at my httpd logs on the internal prod server, I don't see the request in the ssl logs. It shows up in the access_log file as:
150.231.26.130 - - [03/Feb/2015:13:48:57 -0500] "POST /standard/date_function.cfc HTTP/1.1" 200 397 "-" "Axis2"
Any thoughts why this appears to still be coming through port 80? -
Failed to retrieve Analysis Engine Service How to fix
my Shorepoint is 2013 And i now is search is have proplem
On event logs show Failed to retrieve Analysis Engine Service
how to fix it please help me T_T
Best Regrads
chatchai-netdHi,
Per my knowledge, SharePoint 2013 Search services should not be required to the SQL analysis service, however, you can try to install it in SQL Server 2012 with SP1.
For this issue, you can try to just Ctrl+F5 and reset the index, also check if there is any URL not exist in the Start Addresses of the Local SharePoint Sites.
http://techchucker.wordpress.com/2013/04/12/sharepoint-2013-search-stopped-working/
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/MS-SharePoint/Q_28095194.html
And, you can recreate a new search service application in the Central Administration.
If it not works, you can use the PowerShell to recreate the search service application as below.
http://jsuhail.blogspot.com/2014/01/search-has-encountered-problem-that.html
http://microsoft-techies.blogspot.com/2014/03/search-has-encountered-problem-that.html
What’s more, to quickly and accurately find the issue, you can check the event log and ULS log to see if anything unexpected occurred.
For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
For more information, you can refer to:
http://sp-vinod.blogspot.com/2014/02/getting-results-failed.html
https://social.technet.microsoft.com/Forums/exchange/en-US/3f1e94ce-aa3e-4a0a-ab14-8d1e3bee5e78/sharepoint-2013-search-has-encountered-a-problem?forum=sharepointdevelopment
https://social.technet.microsoft.com/Forums/exchange/en-US/73019f94-54f5-4308-9cf8-a7025ecd3228/search-has-encountered-a-problem-that-prevents-results-from-being-returned-if-the-issue-persists?forum=sharepointsearch
https://social.technet.microsoft.com/Forums/exchange/en-US/88fc7028-290f-4a09-9e47-ec7b0bf2c980/search-has-encountered-a-problem-that-prevents-results-from-being-returned?forum=sharepointsearch
Thanks,
Yumi Fu
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]. -
We have installed a new PI 7.1 system and at he moment I have the problem that I can't login into the IB tools. I found a lot of threads with this problem but I can't find a solution for my specific problem. Have a look at the well known error log:
com.sap.aii.utilxi.misc.api.ReconnectRuntimeException: Cannot connect to server using message server: ms://MYHOST:8100/P4
at com.sap.aii.ib.clsif.login.EJBHomeFactory.getInitialContext(EJBHomeFactory.java:668)
at com.sap.aii.ib.clsif.login.EJBHomeFactory.connect(EJBHomeFactory.java:461)
at com.sap.aii.ib.clsif.login.EJBHomeFactory.initRemoteFactory(EJBHomeFactory.java:133)
at com.sap.aii.ib.clsif.login.LoginServiceImpl.login(LoginServiceImpl.java:176)
at com.sap.aii.ib.clsif.login.LoginServiceImpl.login(LoginServiceImpl.java:121)
at com.sap.aii.ib.clsif.login.LoginServiceImpl.login(LoginServiceImpl.java:109)
at com.sap.aii.ib.gui.login.SplashLoginFrame$LoginController.doTrial(SplashLoginFrame.java:960)
at com.sap.aii.ib.gui.login.SplashLoginFrame$LoginAction$1.run(SplashLoginFrame.java:832)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at com.sap.aii.utilxi.swing.toolkit.Guitilities$EventProcessor.dispatchEvent(Guitilities.java:319)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext.
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:488)
at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
at javax.naming.InitialContext.init(Unknown Source)
at javax.naming.InitialContext.<init>(Unknown Source)
at com.sap.aii.ib.clsif.login.EJBHomeFactory.getInitialContext(EJBHomeFactory.java:653)
... 15 more
Caused by: com.sap.engine.interfaces.cross.EXTstinationException: cannot establish connection with any of the available instances:
MYHOST.DOMAIN.EXT:50104 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 172.24.205.193 and port: 50104
at com.sap.engine.interfaces.cross.EXTstination.getNextAvailableBroker(Destination.java:59)
at com.sap.engine.interfaces.cross.EXTstination.getRemoteBroker(Destination.java:35)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:352)
... 20 more
As you can see I call the IB via a pure hostname "MYHOST". But in the last step you can see the the FQDN "MYHOST.DOMAIN.EXT"was used. That brings me into trouble because these are different IP's. I can't reach the MYHOST.DOMAIN.EXT IP and that's why I can't login into the IB.
If I add an entry in my local host file for MYHOST.DOMAIN.EXT with the IP address I can reach all works fine but this solution is unacceptable.
The key question is why the IB uses this FQDN. I can't find any setting where this FQDN is used. I have checked the complete exchange profile, the sld and and and u2026. I always find only the pure hostname MYHOST.
Additionally I have to say that we have already a PI 7.1 system (DEV) whre I can use all tools. But this is a migrated system (from 3.0). I have only problems with that new installed empty system.Thanks Barry. I've checked all connections. They all use the short name and all work.
Thanks Joel, but I think you get me wrong. That's why I will explain it a little bit better.
I can use the IB if I manipulate my own hosts file but this is in my eyes not the right way. As I have written I can use my PI dev system without that kind of manipulation.
My new PI system is at our computer centre. The PI machine has two network interface and I can use only one of these two. As you can see at the error log the full name points to 172.24.205.193 but I only can reach the 172.20.02.193 address. For this second IP we have an entry at our DNS server. The other one (FQDN) comes from the computer center DNS server. Of course I can overwrite it with an entry in my local hosts file but I think that isn't a good solution.
The key question is: Why the full qualified domain name "MYHOST.DOMAIN.EXT" is used instead of the short name.
I call the IB via the web page
http://MYHOST:50100/dir/start/index.jsp
And as you can se at the log the first call goes to this address. But then a second call goes to MYHOST.DOMAIN.EXT:50104. And I can find any setting (exchange profile and so on) where this full qualified domain name is specified. -
Hi All,
I'm getting the below error in My SHarepoint 2013 search Administration page.
Crawler background activity - The search application 'Search Service Application 1' on server "" is not provisioned. Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running
on the server.
and when i click on Crawl Log and content source
it throws the below error
The search service is currently offline. Visit the Services on Server page in SharePoint Central Administration to verify whether
the service is enabled. This might also be because an indexer move is in progress
When i check the search status
Get-SPEnterpriseSearchServiceInstance, it shows all the components are online.
As of now search service application is online and search is working.But not sure why it throws the above error.
I have restarted timer service,search service in services.msc and cleared the sharepoint cache as well.
But no luck,This is happening in my prodcution environment.
Any help will be greatly appreciated.
There are the logs i have found
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.73 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djs2 High [Forced due to logging gap, cached @ 05/23/2014 13:03:22.76, Original Level: VerboseEx] {0} d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Database 8acb High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.80 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General 8nca Medium Application error when access /_admin/search/listcontentsources.aspx, Error=The search service is currently offline. Visit the Services
on Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress. at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e) at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Runtime tkau Unexpected Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on Server page in SharePoint Central
Administration to verify whether the service is enabled. This might also be because an indexer move is in progress. at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object sender, EventArgs e)
at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajlz0 High Getting Error Message for Exception Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on
Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress. at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e) at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General aat87 Monitorable d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24q Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present in the farm. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache'
- Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts present in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajb4s Monitorable ViewStateLog: Failed to write to the velocity cache:
http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3-c3e4-4097-85fd-aa5248346d2e d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e)).
Execution Time=109.695855199474 d4c6939c-b10d-4000-6d95-14caeefe67df
Anil LokaPlease try below mentioned steps:
1. Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service Timer Job" > Disable
2. Then open windows administrative services (services.msc), stop SharePoint Timer Service
3. Clear SharePoint Timer configuration cache by following steps mentioned in below blog:
http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
4. Start SharePoint Timer Service and give it a few seconds so that the new XML files from the location you deleted then are re-populated.
5.Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service" Timer Job > Enable
Please ensure that you mark a question as Answered once you receive a satisfactory response. -
What is the different between Sharepoint fast search service and Sql server fulltext search?
HI ,
I want to kow what is the different between Sharepoint fast search service and Sql server fulltext search?
Or Can I abstract the Sharepoint fast search from the Sharepoint platform as a isolate component?
Thank you.
JamesThey are very, very different beasts.
Firstly FAST Search for SharePoint is the old name for the product and is only relevant for SharePoint 2010 not 2013. It got merged into the standard SharePoint search for the 2013 release.
SharePoint search is aimed at providing a Bing or Google like experience for your intranet content, as well as providing some nifty features that are purely SharePoint releated along the way. That means it can crawl SharePoint content, file shares,
outlook mailboxes, internal and external websites and probably fifty other different things if you really tried. Whilst i'm not an expert on SQL full text search I believe it's intended to provide a search feature for content held within SQL databases
and tables.
Can you run SharePoint purely for Search? Yes, definitely.
Maybe you are looking for
-
Need BADI for checking customers visiting hours in activity
Hi all, I'm looking for a BAdI where I can check the visiting hours of the related customer in an appointment. I've found BAdI CRM_ACTIVITY_H_BADI but it doesn't give me the data about the related customer. I would like to write a message when the ti
-
Acrobat Reader a necessity, but not available?
As a paying member of Creative Cloud, I expected to have a full version of Acrobat Reader available to me. Because I run Vista, Acrobat XI (and no other version for that matter) is listed on my AAM. Following the advice of another thread, I installed
-
Can the DC in board for a macbook 13" take reverse voltage?
My MagSafe socket broke off and I wired it in reverse and now am not sure whether the LED circuitry or the DC in board has been fried
-
I want to sell my 2nd Gen iPod Nano, bought it a few years ago and have barely even used it, downloaded a whopping 6 songs to it. Obviously not something I use or need......so I want to sell it. So is there anything I need to reset or "clear" fro
-
Trying to download Msecer from app store keep getting error code(4) disabled growl
trying to download Msecer from app store keep getting error code(4) disabled growl & enabled gatekeeper to allow download from app store but still cant down load app to mini mac. Anyone have any solutions i havent tryed?