Enginge like sound while using voice based apps

My iphone works fine when i call people but when i use voice based apps like skpe magic jack or even voice recording... the other person hears a sound like that of a running engine instead of my voice and in the case of voice recording..when i playback a recording i hear the same noise instead of the actual voice.
Can anybody help?

Thx for helping me on this, i really appreciate that.
The "crackling problem" is gone, but i got another one.
I got a more or less loud "popping sound" when skipping tracks forward or backward, or when i manually select a track from a list and the ipod starts playing it.
At first i didn't really realize it via the headphones from apple, since they aren't very good but it's there, too.
But playing songs via my hifi-system i became pretty aware of that "initializing" like sound.
I resetted my ipod via the method told on the apple support page (Hold on/off -->Menu/Centerbutton) and updated it in iTunes again, but it didn't go away.
Greetings

Similar Messages

  • Interference/ Crackling sound while using voice over...

    Hi folks.
    I'm new to all this "ipod-stuff". I purchased a ipod nano 5G (16GB) lately.
    I was playing around with the voice over settings today and accidently discovered the following:
    I plugged the ipod to an ipod compatible receiver (Pioneer VSX-918 V) via the ipod-usb cable. The ipod was recognized without any problems and the receiver took over the ipod-controls. So far so good.
    It is possible to change the settings of the receiver, that it won't take over the ipod-control, so i can operate my ipod the "normal way" via scrollwheel/ ipod-menu and so on...
    While i was playing a song, i accidently pushed the center button and the ipod started to read out the current song and faded out the song itself just a little. While reading out I got a crackling interference like a bad tuned radio station, which stopped after the ipod had finished reading out the song.
    I tried the whole thing again, this time I paused the song and pushed the center-button for voice over. The ipod red out the current song with any interference...
    I tried again, plugged in plugged out, restart and so on...you know the deal. :/ Nothing changed...
    What's going on here?
    Receiver bad? ipod bad? Voice over is kinda crappy anyway, but is here something wrong with a chip or something?
    The german apple support couldn't help either and told me that this behaviour is normal, 'cause the voice over "voices" are kinda bad.
    Summary:
    Connected via USB to the receiver:
    Crackling while playing a song and activating voice over...
    No crackling while pausing playback and activating voice over...
    No crackling while playing songs without using voice over...
    Connected via 3,5 mm audio jack to any device/ earphones:
    No interference at all.
    greetings

    Thx for helping me on this, i really appreciate that.
    The "crackling problem" is gone, but i got another one.
    I got a more or less loud "popping sound" when skipping tracks forward or backward, or when i manually select a track from a list and the ipod starts playing it.
    At first i didn't really realize it via the headphones from apple, since they aren't very good but it's there, too.
    But playing songs via my hifi-system i became pretty aware of that "initializing" like sound.
    I resetted my ipod via the method told on the apple support page (Hold on/off -->Menu/Centerbutton) and updated it in iTunes again, but it didn't go away.
    Greetings

  • Monitor my Sound while using Voice Over?

    Hi all -- I have a problem using Final Cut Express 3.5 HD: Can I monitor my voice with headphones while using the voice over tool. So far I can hear the soundtracks of the material i am voicing over but not my own voice - and this is disturbing. Thanks in advance! Autogrill

    The ideal way is to do it on a tape recorder etc.
    (well away from the computer) and then import it, cut
    it and position it exactly where you want on the
    audio timeline.
    I use Audacity (excellent and free) to record my voiceovers while the project is running in View > Video out > Digital Cinema Display. This ensures that the voice is in sync and with the mike several feet away from the computer there is no noise. Save the voice from audacity as an AIFF file and drop it into the Timeline and adjust the position to sync it.
    Or, if I can't think fast enough and without ums and ahs, I record in blocks.

  • My ipod Nano generation 7 shuts down unexpectedly while using the NIKE  app, has anyone experienced this problem?

    My ipod Nano generation 7 shuts down unexpectedly while using the NIKE  app, has anyone experienced this problem?

    This is not a problem I have only had with 7th gen. iPod.  I have had this problem with the 5th gen.  It goes back a few years.  Nike and Apple are aware of this.  Nothing has been done.  It appears that when the iPod voice commences (whether to update you on the status of your run) and you touch a button to prompt a mileage update or song change yourself (or even brush the device wrong when taking off a jacket), the operating system overloads and cannot sort it out.  It then shuts down and reboots.  Your mileage is lost.  So sorry.  Have a nice day.
    Love the other aspects of running with a nano (small and light weight).  I can keep it high and dry and out of the way.  Like the software.  Use it almost everyday.  Hate the unknown dropped runs.  I have logged over 2,000 miles with these devices.  Today I lost another 3 miles - probably the 30-40th time it has happened.  Frustration is somewhere between time for another device to time for another system - Map My Run indeed!
    This probably occurs with my iPod once or twice a month.  Went to the Apple Store - three times.  The first time was maybe two years ago and they first tried some magic dust and then on the second visit, they swapped out my nano - it was a bit flimsy.  The problem returned.  I then upgraded.  The problem returned.  The third time they did a reset and it seemed to help.  Then, it returned.  But to download an older software version, verify the fidelity of the UBS cable, jump from computer to computer, make a trip to the Apple store, and perform so many two steps on one leg just to get what we paid for seems . . .  well, lame.  And, Apple told us the thingy would work using all the different computers and software (Vista, Nike, etc. etc.).   
    Oh, one other thing.  The Apple Store told me to complain to Nike.  Nike said their software is fine.  This is like dealing with General Motors or the government - but, worse.  Not my problem man.  See the guy over there.  Got it.
    I note that no one from Apple is jumping in the chain here with a fix.  So much for customer exuberance.  Generally like Apple.  We have about 20 Apple devices in our family (desktops, portables, phones, pods, tablets) and are lining up for the watches . . .  but, maybe Apple is an idea who time has come and gone, . . . like the wind. 

  • IPhone 5 making weird sound while using Viber

    My iphone will start making strange low tone beep sound while using viber. Only when I close the app (holding it long at multi-task and clicking the X) will it stop. And then when I open it again it will start making weird beeps again. Please help.

        Hey there kben,
    I'm sorry to hear that your iPhone is having the same issues. This is not a known issue on the device so lets try and take a look to see what is causing it. Did you have this issue before the 7.0.2 updated? Please try a soft reset,http://vz.to/16Qv4Id and let us know if the issues persist.
    If the soft reset does not work, I would recommend performing a hard reset on the device,http://vz.to/17aDIPT.
    Let us know if you need any additional assistance.
    NicholasB_VZW
    Follow us on Twitter @VZWSupport

  • IPhone 5 unable to connect to internet or use web-based apps like Facebook or Tumblr

    About two days ago, shortly after using my iPhone 5 to upload a picture of my son eating a donut to Facebook, I seem to have lost all ability to connect to the internet or update content on web-based apps like Facebook or Tumblr.  I tried to restore my iPhone in iTunes on my computer but could not do that without first turning of "Find My iPhone," in the iCloud section of my settings.  When asked to enter my password to turn off this feature the phone is "unable to connect to iCloud."  It doesn't seem to matter if I'm connected to WiFi or using my cell data - I'm getting a strong signal in either case, but the phone is unable to connect to anything.  I CAN make phone calls and send texts but that's just about it.
    I recently updated to IOS 8.1.1 but it worked fine for several days before this problem started.  Any ideas?

    I reset my network settings (Settings > General > Reset > Reset Network Settings) and rejoined my network, and that seemed to fix it. Apps are working on wifi and on data, and I can once again send imessages. Since I couldn't find a similar post very easily, I wanted to post this for whoever needs help with this problem ;D

  • Is it possible to play audio from video in the background while using a different app?

    I would like to be ale to play audio from a video file in videos (or av player hd) in the background whie using a diffent app in my iPad 2. (ie watching a video while taking notes on the content or highlighting an e-textbook).
    Is this possible? Either through the original iPad functionality or by downloading a separate app?
    Thanks,
    mji

    Is it important that the music come from a video, or are you just looking to listen to music in the background, while doing something else.  If the later, you can certainly play music from the Music App, Pandora, or iHeart Radio, etc., and with the music playing, tap your home button to go to your home page and open anything else you want and the music will continue.
    I don't have any videos to try out right now, but you try the same thing out and if the music continues, it works.  If it doesn't, it doesn't.

  • IPhone 3GS : Random Interruptions while using iPod & NikePlus App

    IF YOU ARE HAVING THIS SAME PROBLEM PLEASE CONTACT APPLE BY PHONE or EMAIL
    I JUST SPOKE TO APPLE CARE AND THEY CLAIM NOONE ELSE HAS COMPLAINED ABOUT THIS.
    They told me that if more people complain, then and only then, will they have their engineers look into it.
    I've been having the same problem also. It first happened with the NikePlus App....it would pause workout and resume workout randomly.
    Yesterday I went for a bike ride and while using the iPod on my iPhone 3GS the Voice Control would interrupt the music at random.
    I think it started after the recent (June2010) iPhone software update.
    Totally Annoying!!!
    Applecare recommended that I open iTunes with my phone attached and proceed to 'Restore phone to New'. They asked me not to add any apps to the phone until after testing the iPod again during another workout to see if the problem is resolved. Then, I'm to add the NikePlus app and try it again. This way, they can try to pinpoint if it's an App Calibration problem. I'm to contact them to with the results. (I'll post it here also)
    *If you too have this problem...please report the problem to apple so that they can address the issue.*

    its not your phone bud im having the same problem to keeps crashing and i know its not that the phone is old unless you call 2days old as got it from apple store buch st glasgow on the 14th dec 2011 its an ios issue im sure as my last 1 updated to ios 5 and it wouldnt read sims no longer after speaking to apple they agreed to replace my handset as they are aware that the ios is frying some 3gs model mines was left a brick ie paper weight so if mines is crashing ect i cant even use the camera as it sticks then switches off apple need to sort this ios 5 out

  • [ps3mediaserver][pms-svn][AUR] No sound while using external subtitles

    Greetings everyone,
    I am experiencing some weird behavior while using External Subtitles, e.g. Playing an AVI file with PS3MediaServer works fine but playing the very same AVI file with external subtitles gives me the video with subtitles and no sound.
    My Server configuration is as follows :
    Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz
    RAM :2048 Mo
    OS : Archlinux 2.6.37-ARCH #1 SMP PREEMPT Tue Mar 8 08:34:35 CET 2011 x86_64
    Target : Playstation 3 Slim, firmware 3.60
    Here are the various Sofware versions I use :
    PMS version I am using is PS3 Media Server 1.21.0 (built from AUR, PKG: pms-svn)
    Java version is Java: 1.6.0_22-Sun Microsystems Inc.
    MPlayer version is "MPlayer SVN-r32792-4.5.2 (C) 2000-2011 MPlayer Team" and so is "MEncoder SVN-r32792-4.5.2 (C) 2000-2011 MPlayer Team"
    TSMuxer version is "1.10.6-10"
    FFMpeg version is "FFmpeg version git-2611e52"
    The network configuration of the server is : 192.168.0.20, netmask 255.255.255.0 ; 100MBits Full Duplex (Wired)
    The network configuration of the Playstation 3 is : 192.168.0.15, netmask 255.255.255.0 ; Auto (Wired, no WiFi !)
    Both are linked on a 100MBits Switch : Playstation 3 <--> Switch 100 Mbits <--> PS3 Media Server
    My PMS.conf is :
    thumbnails = true
    language =
    prevents_sleep_mode = true
    folders = \/srv\/shares
    network_interface = eth0
    hide_empty_folders = true
    hide_media_library_folder = true
    hide_transcode_folder = true
    hide_enginenames = true
    enable_archive_browsing = false
    audio_thumbnails_method = 2
    mencoder_subfribidi = false
    mencoder_disablesubs = false
    autoloadsrt = true
    hostname =
    port = 5001
    thumbnail_seek_pos = 10
    nbcores = 4
    turbomode = true
    minimized = false
    hidevideosettings = false
    charsetencoding = 850
    engines = mencoder,avsmencoder,tsmuxer,mplayeraudio,ffmpegaudio,tsmuxeraudio,mencoderwebvideo,mplayervideodump,mplayerwebaudio,ffmpegdvrmsremux
    avisynth_convertfps = true
    avisynth_script = #AviSynth script is now fully customisable
    transcode_block_multiple_connections = false
    tsmuxer_forcefps = true
    tsmuxer_preremux_pcm = false
    tsmuxer_preremux_ac3 = false
    audiochannels = 2
    audiobitrate = 384
    maximumbitrate = 0
    skiploopfilter = false
    mencoder_fontconfig = false
    mencoder_font =
    mencoder_forcefps = false
    mencoder_usepcm = false
    mencoder_intelligent_sync = true
    mencoder_decode =
    mencoder_encode = keyint=1:vqscale=1:vqmin=2
    mencoder_nooutofsync = true
    # mencoder_audiolangs = fre,eng
    # mencoder_sublangs = fre,off;fr,off;eng,off;en,off
    mencoder_audiosublangs = fre,off;fr,off;eng,off;en,off
    mencoder_ass_scale = 1.0
    mencoder_ass_margin = 10
    mencoder_ass_outline = 1
    mencoder_ass_shadow = 1
    mencoder_noass_scale = 3
    mencoder_noass_subpos = 2
    mencoder_noass_blur = 1
    mencoder_noass_outline = 1
    mencoder_subcp = cp1252
    mencoder_ass = false
    mencoder_yadif = false
    mencoder_scaler = false
    mencoder_scalex = 0
    mencoder_scaley = 0
    ffmpeg = -g 1 -qscale 1 -qmin 2
    # The next value has to be chosen very carefully: to low = possible stuttering if the network is congested, but
    # to high causes the java heap to be to small. Check the -Xmx-setting in /opt/pms/PMS.sh and raise it to 1024M
    # or higher if you see unexplainable Out Of Memory-errors in the debug.log
    maxvideobuffer = 400
    use_mplayer_for_video_thumbs = false
    # The next value sorts your media files. 0 (default) = A-Z while 1 = Z-A
    sort_method =
    usecache = true
    forcetranscode=
    Here are the tests I have run :
    MediaInfo output
    General
    Complete name : test without subs.avi
    Format : AVI
    Format/Info : Audio Video Interleave
    File size : 350 MiB
    Duration : 42mn 24s
    Overall bit rate : 1 153 Kbps
    Writing application : transcode-1.0.6
    Video
    ID : 0
    Format : MPEG-4 Visual
    Format profile : Advanced Simple@L5
    Format settings, BVOP : 2
    Format settings, QPel : No
    Format settings, GMC : No warppoints
    Format settings, Matrix : Default (H.263)
    Codec ID : XVID
    Codec ID/Hint : XviD
    Duration : 42mn 24s
    Bit rate : 978 Kbps
    Width : 624 pixels
    Height : 352 pixels
    Display aspect ratio : 16:9
    Frame rate : 23.976 fps
    Color space : YUV
    Chroma subsampling : 4:2:0
    Bit depth : 8 bits
    Scan type : Progressive
    Compression mode : Lossy
    Bits/(Pixel*Frame) : 0.186
    Stream size : 296 MiB (85%)
    Writing library : XviD 1.2.1 (UTC 2008-12-04)
    Audio
    ID : 1
    Format : MPEG Audio
    Format version : Version 1
    Format profile : Layer 3
    Mode : Joint stereo
    Codec ID : 55
    Codec ID/Hint : MP3
    Duration : 42mn 23s
    Bit rate mode : Variable
    Bit rate : 160 Kbps
    Channel(s) : 2 channels
    Sampling rate : 48.0 KHz
    Compression mode : Lossy
    Stream size : 49.4 MiB (14%)
    Alignment : Aligned on interleaves
    Interleave, duration : 24 ms (0.58 video frame)
    Writing library : LAME3.90.
    Encoding settings : -m j -V 4 -q 2 -lowpass 18 --abr 160
    And its very same but with external subtitles :
    -rw-r--r-- 1 svc-pms svc-pms 77159 Oct 12 12:57 test with subs.srt
    -rw-rw-r-- 1 svc-pms svc-pms 366711578 Oct 23 10:50 test with subs.avi
    MediaInfo output, just to acknowledge it is the same file, but with a different name
    General
    Complete name : test with subs.avi
    Format : AVI
    Format/Info : Audio Video Interleave
    File size : 350 MiB
    Duration : 42mn 24s
    Overall bit rate : 1 153 Kbps
    Writing application : transcode-1.0.6
    Video
    ID : 0
    Format : MPEG-4 Visual
    Format profile : Advanced Simple@L5
    Format settings, BVOP : 2
    Format settings, QPel : No
    Format settings, GMC : No warppoints
    Format settings, Matrix : Default (H.263)
    Codec ID : XVID
    Codec ID/Hint : XviD
    Duration : 42mn 24s
    Bit rate : 978 Kbps
    Width : 624 pixels
    Height : 352 pixels
    Display aspect ratio : 16:9
    Frame rate : 23.976 fps
    Color space : YUV
    Chroma subsampling : 4:2:0
    Bit depth : 8 bits
    Scan type : Progressive
    Compression mode : Lossy
    Bits/(Pixel*Frame) : 0.186
    Stream size : 296 MiB (85%)
    Writing library : XviD 1.2.1 (UTC 2008-12-04)
    Audio
    ID : 1
    Format : MPEG Audio
    Format version : Version 1
    Format profile : Layer 3
    Mode : Joint stereo
    Codec ID : 55
    Codec ID/Hint : MP3
    Duration : 42mn 23s
    Bit rate mode : Variable
    Bit rate : 160 Kbps
    Channel(s) : 2 channels
    Sampling rate : 48.0 KHz
    Compression mode : Lossy
    Stream size : 49.4 MiB (14%)
    Alignment : Aligned on interleaves
    Interleave, duration : 24 ms (0.58 video frame)
    Writing library : LAME3.90.
    Encoding settings : -m j -V 4 -q 2 -lowpass 18 --abr 160
    A- I tried playing the AVI file without external subtitles and it is working fine. 
    /var/log/pms.log :
    GUI environment not available
    Switching to console mode
    [main] TRACE 06:17:02.228 Starting PS3 Media Server 1.21.0
    [main] TRACE 06:17:02.237 by shagrath / 2008-2011
    [main] TRACE 06:17:02.237 http://ps3mediaserver.org
    [main] TRACE 06:17:02.237 http://ps3mediaserver.blogspot.com
    [main] TRACE 06:17:02.238 http://code.google.com/p/ps3mediaserver
    [main] TRACE 06:17:02.238
    [main] TRACE 06:17:02.238 Java: 1.6.0_22-Sun Microsystems Inc.
    [main] TRACE 06:17:02.238 OS: Linux amd64 2.6.37-ARCH
    [main] TRACE 06:17:02.238 Encoding: UTF-8
    [main] TRACE 06:17:02.238 PMS.conf: /filers/fvEXT3-01/_applications_/opt/pms/PMS.conf
    [main] TRACE 06:17:02.238 Working directory: /filers/fvEXT3-01/_applications_/opt/pms
    [main] TRACE 06:17:02.245 Temp folder: /tmp/ps3mediaserver
    [main] TRACE 06:17:02.652 Loading configuration file: FreeboxHD.conf
    [main] TRACE 06:17:02.662 Loading configuration file: XBMC.conf
    [main] TRACE 06:17:02.666 Loading configuration file: FreecomMusicPal.conf
    [main] TRACE 06:17:02.669 Loading configuration file: XBOX360.conf
    [main] TRACE 06:17:02.685 Loading configuration file: PS3.conf
    [main] TRACE 06:17:02.705 Loading configuration file: Streamium.conf
    [main] TRACE 06:17:02.708 Loading configuration file: WDTVLive.conf
    [main] TRACE 06:17:02.710 Loading configuration file: N900.conf
    [main] TRACE 06:17:02.712 Loading configuration file: Philips.conf
    [main] TRACE 06:17:02.715 Loading configuration file: Bravia4500.conf
    [main] TRACE 06:17:02.718 Loading configuration file: WMP.conf
    [main] TRACE 06:17:02.720 Loading configuration file: Samsung.conf
    [main] TRACE 06:17:02.722 Loading configuration file: Bravia5500.conf
    [main] TRACE 06:17:02.724 Loading configuration file: Realtek.conf
    [main] TRACE 06:17:02.726 Loading configuration file: Kuro.conf
    [main] TRACE 06:17:02.729 Loading configuration file: Android.conf
    [main] TRACE 06:17:02.731 Loading configuration file: BraviaEX.conf
    [main] TRACE 06:17:02.734 Loading configuration file: PopcornHour.conf
    [main] TRACE 06:17:02.736 Checking font cache... launching simple instance of MPlayer... You may have to wait 60 seconds!
    [main] TRACE 06:17:04.173 Done!
    [main] TRACE 06:17:04.210 Loading plugins from /filers/fvEXT3-01/_applications_/opt/pms/plugins
    [main] TRACE 06:17:04.227 No plugins found
    [main] TRACE 06:17:04.257 Registering transcoding engine FFmpeg Audio
    [main] TRACE 06:17:04.300 Registering transcoding engine MEncoder
    [main] TRACE 06:17:04.300 Registering transcoding engine MPlayer Audio
    [main] TRACE 06:17:04.301 Registering transcoding engine MEncoder Web
    [main] TRACE 06:17:04.301 Registering transcoding engine MPlayer Video Dump
    [main] TRACE 06:17:04.301 Registering transcoding engine MPlayer Web
    [main] TRACE 06:17:04.303 Registering transcoding engine TsMuxer
    [main] TRACE 06:17:04.303 Registering transcoding engine Audio High Fidelity
    [main] TRACE 06:17:04.303 Registering transcoding engine VLC Audio Streaming
    [main] TRACE 06:17:04.304 Registering transcoding engine VLC Video Streaming
    [main] TRACE 06:17:04.304 Registering transcoding engine Raws Thumbnailer
    [main] TRACE 06:17:04.401 Scanning network interface eth0 / eth0
    [main] TRACE 06:17:04.403 Using address /192.168.0.20 found on network interface: name:eth0 (eth0) index: 2 addresses: /192.168.0.20;
    [main] TRACE 06:17:04.403 Created socket: /192.168.0.20:5001
    [main] TRACE 06:17:04.548 Using database located at : /filers/fvEXT3-01/_applications_/opt/pms/database
    [main] TRACE 06:17:04.930 A tiny media library admin interface is available at: http://192.168.0.20:5001/console/home
    [main] TRACE 06:17:05.001 Using the following UUID: d83f2e45-d8b8-3db7-b0ff-a6fc95ce046c
    [New I/O server worker #1-1] TRACE 06:17:08.787 Renderer Playstation 3 found on this address: /192.168.0.15
    [main] TRACE 06:17:09.902 It's ready! You should see the server appear on the XMB
    [New I/O server worker #1-1] TRACE 06:17:10.794 Renderer Playstation 3 has an estimated network speed of: 93 Mb/s
    /opt/pms/debug.log :
    available at : http://dpaste.org/774i/
    B - I tried playing the AVI file with external subtitles (SRT) and the file is playing with subtitles but no sound :-(
    /var/log/pms.log :
    GUI environment not available
    Switching to console mode
    [main] TRACE 06:20:24.967 Starting PS3 Media Server 1.21.0
    [main] TRACE 06:20:24.968 by shagrath / 2008-2011
    [main] TRACE 06:20:24.968 http://ps3mediaserver.org
    [main] TRACE 06:20:24.968 http://ps3mediaserver.blogspot.com
    [main] TRACE 06:20:24.968 http://code.google.com/p/ps3mediaserver
    [main] TRACE 06:20:24.969
    [main] TRACE 06:20:24.969 Java: 1.6.0_22-Sun Microsystems Inc.
    [main] TRACE 06:20:24.969 OS: Linux amd64 2.6.37-ARCH
    [main] TRACE 06:20:24.969 Encoding: UTF-8
    [main] TRACE 06:20:24.969 PMS.conf: /filers/fvEXT3-01/_applications_/opt/pms/PMS.conf
    [main] TRACE 06:20:24.969 Working directory: /filers/fvEXT3-01/_applications_/opt/pms
    [main] TRACE 06:20:24.973 Temp folder: /tmp/ps3mediaserver
    [main] TRACE 06:20:25.038 Loading configuration file: FreeboxHD.conf
    [main] TRACE 06:20:25.040 Loading configuration file: XBMC.conf
    [main] TRACE 06:20:25.041 Loading configuration file: FreecomMusicPal.conf
    [main] TRACE 06:20:25.044 Loading configuration file: XBOX360.conf
    [main] TRACE 06:20:25.047 Loading configuration file: PS3.conf
    [main] TRACE 06:20:25.055 Loading configuration file: Streamium.conf
    [main] TRACE 06:20:25.057 Loading configuration file: WDTVLive.conf
    [main] TRACE 06:20:25.059 Loading configuration file: N900.conf
    [main] TRACE 06:20:25.061 Loading configuration file: Philips.conf
    [main] TRACE 06:20:25.063 Loading configuration file: Bravia4500.conf
    [main] TRACE 06:20:25.065 Loading configuration file: WMP.conf
    [main] TRACE 06:20:25.068 Loading configuration file: Samsung.conf
    [main] TRACE 06:20:25.069 Loading configuration file: Bravia5500.conf
    [main] TRACE 06:20:25.071 Loading configuration file: Realtek.conf
    [main] TRACE 06:20:25.073 Loading configuration file: Kuro.conf
    [main] TRACE 06:20:25.076 Loading configuration file: Android.conf
    [main] TRACE 06:20:25.077 Loading configuration file: BraviaEX.conf
    [main] TRACE 06:20:25.080 Loading configuration file: PopcornHour.conf
    [main] TRACE 06:20:25.082 Checking font cache... launching simple instance of MPlayer... You may have to wait 60 seconds!
    [main] TRACE 06:20:25.144 Done!
    [main] TRACE 06:20:25.153 Loading plugins from /filers/fvEXT3-01/_applications_/opt/pms/plugins
    [main] TRACE 06:20:25.153 No plugins found
    [main] TRACE 06:20:25.160 Registering transcoding engine FFmpeg Audio
    [main] TRACE 06:20:25.166 Registering transcoding engine MEncoder
    [main] TRACE 06:20:25.167 Registering transcoding engine MPlayer Audio
    [main] TRACE 06:20:25.167 Registering transcoding engine MEncoder Web
    [main] TRACE 06:20:25.167 Registering transcoding engine MPlayer Video Dump
    [main] TRACE 06:20:25.168 Registering transcoding engine MPlayer Web
    [main] TRACE 06:20:25.169 Registering transcoding engine TsMuxer
    [main] TRACE 06:20:25.169 Registering transcoding engine Audio High Fidelity
    [main] TRACE 06:20:25.170 Registering transcoding engine VLC Audio Streaming
    [main] TRACE 06:20:25.170 Registering transcoding engine VLC Video Streaming
    [main] TRACE 06:20:25.170 Registering transcoding engine Raws Thumbnailer
    [main] TRACE 06:20:25.223 Scanning network interface eth0 / eth0
    [main] TRACE 06:20:25.224 Using address /192.168.0.20 found on network interface: name:eth0 (eth0) index: 2 addresses: /192.168.0.20;
    [main] TRACE 06:20:25.224 Created socket: /192.168.0.20:5001
    [main] TRACE 06:20:25.279 Using database located at : /filers/fvEXT3-01/_applications_/opt/pms/database
    [main] TRACE 06:20:26.010 A tiny media library admin interface is available at: http://192.168.0.20:5001/console/home
    [main] TRACE 06:20:26.017 Using the following UUID: d83f2e45-d8b8-3db7-b0ff-a6fc95ce046c
    [New I/O server worker #1-1] TRACE 06:20:28.867 Renderer Playstation 3 found on this address: /192.168.0.15
    [New I/O server worker #1-1] TRACE 06:20:30.872 Renderer Playstation 3 has an estimated network speed of: 93 Mb/s
    [main] TRACE 06:20:32.488 It's ready! You should see the server appear on the XMB
    [New I/O server worker #1-6] TRACE 06:20:56.875 Starting transcode/remux of test with subs.avi
    So, obviously here, the only thing which changes from before was that, this time, the PS3 Media Server did a transcode/remux of the file (for the subtitles to be streamed)
    /opt/pms/debug.log :
    available at : http://dpaste.org/6XMI/
    I have pasted the complete debug.log but I believe the problem is around this :
    [New I/O server worker #1-6] DEBUG 06:20:56.874 Opened request handler on socket /192.168.0.15:64494 // Playstation 3
    [New I/O server worker #1-6] DEBUG 06:20:56.874 Request: HTTP/1.0 : HEAD : get/0$0$4$0/test+with+subs.avi
    [New I/O server worker #1-6] DEBUG 06:20:56.874 Received on socket: Accept-Encoding: identity
    [New I/O server worker #1-6] DEBUG 06:20:56.874 Received on socket: Cache-Control: no-cache
    [New I/O server worker #1-6] DEBUG 06:20:56.874 Received on socket: Connection: close
    [New I/O server worker #1-6] DEBUG 06:20:56.874 Received on socket: Host: 192.168.0.20:5001
    [New I/O server worker #1-6] DEBUG 06:20:56.874 Received on socket: User-Agent: PLAYSTATION 3
    [New I/O server worker #1-6] INFO 06:20:56.874 HTTP: get/0$0$4$0/test+with+subs.avi / 0-0
    [New I/O server worker #1-6] DEBUG 06:20:56.874 Searching for objectId: 0$0$4$0 with children option: false
    [New I/O server worker #1-6] DEBUG 06:20:56.875 Asked stream chunk [0-0] timeseek: 0.0 of test with subs.avi and player MEncoder
    [New I/O server worker #1-6] TRACE 06:20:56.875 Starting transcode/remux of test with subs.avi
    [New I/O server worker #1-6] DEBUG 06:20:56.875 Looking for an audio track with lang: eng
    [New I/O server worker #1-6] DEBUG 06:20:56.883 Looking for an audio track with lang: fre
    [New I/O server worker #1-6] DEBUG 06:20:56.884 Looking for an audio track with lang: jpn
    [New I/O server worker #1-6] DEBUG 06:20:56.886 Looking for an audio track with lang: ger
    [New I/O server worker #1-6] DEBUG 06:20:56.887 Looking for an audio track with lang: und
    [New I/O server worker #1-6] DEBUG 06:20:56.888 Matched audio track: Audio: MP3 / lang: und / ID: 1
    [New I/O server worker #1-6] DEBUG 06:20:56.888 Search a match for: und with fre and off
    [New I/O server worker #1-6] DEBUG 06:20:56.889 Search a match for: und with fr and off
    [New I/O server worker #1-6] DEBUG 06:20:56.889 Search a match for: und with eng and off
    [New I/O server worker #1-6] DEBUG 06:20:56.890 Search a match for: und with en and off
    [New I/O server worker #1-6] DEBUG 06:20:56.891 Found subtitles track: Sub: SubRip / lang: und / ID: 100 / FILE: /srv/shares/test_with_sub/test with subs.srt
    [New I/O server worker #1-6] DEBUG 06:20:56.891 Found external file: /srv/shares/test_with_sub/test with subs.srt
    [New I/O server worker #1-6] DEBUG 06:20:56.892 channels=2
    [mkfifo] INFO 06:20:56.979 Starting mkfifo --mode=777 /tmp/ps3mediaserver/mencoder1300252856978
    [mkfifo] INFO 06:20:56.995 Unix process ID (mkfifo): 4390
    [mencoder] INFO 06:20:57.029 Starting mencoder -ss 0 -quiet /srv/shares/test_with_sub/test with subs.avi -quiet -quiet -oac lavc -of mpeg -quiet -quiet -mpegopts format=mpeg2:muxrate=500000:vbuf_size=1194:abuf_size=64 -ovc lavc -channels 2 -lavdopts debug=0:threads=4 -lavcopts autoaspect=1:vcodec=mpeg2video:acodec=ac3:abitrate=256:threads=4:keyint=1:vqscale=1:vqmin=2 -spuaa 3 -subfont-text-scale 3 -subfont-outline 1 -subfont-blur 1 -subpos 98 -quiet -quiet -sid 100 -quiet -quiet -ofps 24000/1001 -sub /srv/shares/test_with_sub/test with subs.srt -utf8 -mc 0 -noskip -af lavcresample=48000 -srate 48000 -o /tmp/ps3mediaserver/mencoder1300252856978
    [mencoder] INFO 06:20:57.048 Reading pipe: /tmp/ps3mediaserver/mencoder1300252856978
    [mencoder] DEBUG 06:20:57.049 Opening file /tmp/ps3mediaserver/mencoder1300252856978 for reading...
    [New I/O server worker #1-6] DEBUG 06:20:57.129 Sleeping for 6000 milliseconds
    [mencoder] INFO 06:20:57.395 Attaching thread: mencoder
    [Timer-1] DEBUG 06:20:57.396 Buffered Space: 0 bytes / inputs: 0
    [mencoder] INFO 06:20:57.396 Unix process ID (mencoder): 4395
    [Thread-30] DEBUG 06:20:57.396 MEncoder SVN-r32792-4.5.2 (C) 2000-2011 MPlayer Team
    [Thread-30] DEBUG 06:20:57.397 161 audio & 351 video codecs
    [Thread-30] DEBUG 06:20:57.397 success: format: 0 data: 0x0 - 0x15db931a
    [Thread-30] DEBUG 06:20:57.397 AVI file format detected.
    [Thread-30] DEBUG 06:20:57.397 [aviheader] Video stream found, -vid 0
    [Thread-30] DEBUG 06:20:57.397 [aviheader] Audio stream found, -aid 1
    [Thread-30] DEBUG 06:20:57.397 VIDEO: [XVID] 624x352 24bpp 23.976 fps 977.5 kbps (119.3 kbyte/s)
    [Thread-30] DEBUG 06:20:57.397 [V] filefmt:3 fourcc:0x44495658 size:624x352 fps:23.976 ftime:=0.0417
    [Thread-30] DEBUG 06:20:57.397 ==========================================================================
    [Thread-30] DEBUG 06:20:57.397 Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
    [Thread-30] DEBUG 06:20:57.397 AUDIO: 48000 Hz, 2 ch, s16le, 128.0 kbit/8.33% (ratio: 16000->192000)
    [Thread-30] DEBUG 06:20:57.397 Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
    [Thread-30] DEBUG 06:20:57.397 ==========================================================================
    [Thread-30] DEBUG 06:20:57.397 PACKET SIZE: 2048 bytes, deltascr: 884
    [Thread-30] DEBUG 06:20:57.397 Opening video filter: [expand osd=1]
    [Thread-30] DEBUG 06:20:57.397 Expand: -1 x -1, -1 ; -1, osd: 1, aspect: 0.000000, round: 1
    [Thread-30] DEBUG 06:20:57.397 ==========================================================================
    [Thread-30] DEBUG 06:20:57.397 Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
    [Thread-30] DEBUG 06:20:57.403 Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
    [Thread-30] DEBUG 06:20:57.403 ==========================================================================
    [Thread-27] DEBUG 06:20:57.403 [ac3 @ 0xd37ca0]No channel layout specified. The encoder will guess the layout, but it might be incorrect.
    [Thread-27] DEBUG 06:20:57.437 Limiting audio preload to 0.4s.
    [Thread-27] DEBUG 06:20:57.437 Increasing audio density to 4.
    [Thread-30] DEBUG 06:20:57.463 Movie-Aspect is 1.77:1 - prescaling to correct movie aspect.
    [Thread-30] DEBUG 06:20:57.463 videocodec: libavcodec (624x352 fourcc=3267706d [mpg2])
    [Thread-30] DEBUG 06:20:57.463 [VE_LAVC] Using constant qscale = 1.000000 (VBR).
    [Thread-30] DEBUG 06:20:57.617 Writing header...
    [Timer-1] DEBUG 06:20:59.396 Buffered Space: 26595328 bytes / inputs: 0
    [Thread-28] DEBUG 06:21:01.227 freeMemory: 25791584
    [Thread-28] DEBUG 06:21:01.227 totalMemory: 81592320
    [Thread-28] DEBUG 06:21:01.228 maxMemory: 715849728
    [Thread-28] DEBUG 06:21:01.228 Extending buffer to 419430400
    [Timer-1] DEBUG 06:21:01.397 Buffered Space: 49999872 bytes / inputs: 0
    [Thread-28] DEBUG 06:21:01.726 Done extending
    Thing is, I do not have the same issue with files that are not (yet) MP3-Audio powered, for instance :
    General
    Complete name : /srv/shares/media03/directories/toto.avi
    Format : AVI
    Format/Info : Audio Video Interleave
    Format profile : OpenDML
    Format settings : rec
    File size : 1.59 GiB
    Duration : 1h 46mn
    Overall bit rate : 2 140 Kbps
    Writing application : AVI-Mux GUI 1.17.8.3, Feb 16 201019:42:50
    Video
    ID : 0
    Format : MPEG-4 Visual
    Format profile : Advanced Simple@L5
    Format settings, BVOP : 2
    Format settings, QPel : Yes
    Format settings, GMC : No warppoints
    Format settings, Matrix : Default (H.263)
    Codec ID : XVID
    Codec ID/Hint : XviD
    Duration : 1h 46mn
    Bit rate : 1 620 Kbps
    Width : 1 280 pixels
    Height : 544 pixels
    Display aspect ratio : 2.35:1
    Frame rate : 23.976 fps
    Color space : YUV
    Chroma subsampling : 4:2:0
    Bit depth : 8 bits
    Scan type : Progressive
    Compression mode : Lossy
    Bits/(Pixel*Frame) : 0.097
    Stream size : 1.20 GiB (76%)
    Writing library : XviD 1.2.1 (UTC 2008-12-04)
    Audio #1
    ID : 1
    Format : AC-3
    Format/Info : Audio Coding 3
    Mode extension : CM (complete main)
    Codec ID : 2000
    Duration : 1h 46mn
    Bit rate mode : Constant
    Bit rate : 384 Kbps
    Channel(s) : 6 channels
    Channel positions : Front: L C R, Side: L R, LFE
    Sampling rate : 48.0 KHz
    Bit depth : 16 bits
    Compression mode : Lossy
    Stream size : 292 MiB (18%)
    Alignment : Aligned on interleaves
    Interleave, duration : 64 ms (1.53 video frames)
    Interleave, preload duration : 192 ms
    Title : UW 6ch audio
    Audio #2
    ID : 2
    Format : AC-3
    Format/Info : Audio Coding 3
    Mode extension : CM (complete main)
    Codec ID : 2000
    Duration : 1h 46mn
    Bit rate mode : Constant
    Bit rate : 128 Kbps
    Channel(s) : 2 channels
    Channel positions : Front: L R
    Sampling rate : 48.0 KHz
    Bit depth : 16 bits
    Compression mode : Lossy
    Stream size : 97.4 MiB (6%)
    Alignment : Aligned on interleaves
    Interleave, duration : 64 ms (1.53 video frames)
    Interleave, preload duration : 192 ms
    Title : UW 2ch audio
    This file is well played by PS3 Media Server.
    I am quite confused with this issue ; did anyone experienced the same thing ?
    Best Regards,

    Having the same problem. I'm watching all of my movies without subs now, because transcoding kills the 5.1 audio (no problems with 2 channel audio). A workaround is posted in the comments of the pms-svn package.
    I will post the URL to this thread to another thread with probably the same problem (mplayer/x264). I have not yet seen a real solution to this, and I'm not really familiar with the bugzilla's from both projects.
    Other threads with similar problems:
    https://bbs.archlinux.org/viewtopic.php?id=112219 (devede also uses mplayer and x264)
    https://bugs.archlinux.org/task/22654 (related bug in Archlinux)
    http://bugzilla.mplayerhq.hu/show_bug.cgi?id=1865 (related bug in mplayer)
    https://bbs.archlinux.org/viewtopic.php?id=115165 (this thread)
    Another workaround might be to trick pms into using ffmpeg or vlc rather than mencoder. I'm also streaming to a ps3 - I didn't try it, but it could be as easy as temporarily changing settings inside the profile for a ps3-client.
    Last edited by zenlord (2011-03-22 16:15:38)

  • Split messages while using content based routing

    Hi gurus,
    We are using content base routing by checking the value of field F1 in our scenario. If the value is V1, then route to system A; If the value is V2, then route to system B.
    There are two layer in the send message type: layer1 and layer2. Both layer1 and layer2 can occur many times.
    As you know,  The field maybe existed many times in the real messages. Sometimes with the value V1, sometimes with the value V2.
    If F1 is in the layer1, can we split into two messages by judging the value of F1?
    If F1 is in the layer2, can we split into two messages by judging the value of F1?
    Thanks in advance.

    Hi Grzegorz,
    Thanks for your reply.
    Actually my case is as follows:
    (send messge)
                   <DATA>
                        <F1>V1</F1>
                   </DATA>
                   <DATA>
                        <F1>V2</F1>
                   </DATA>
                   <DATA>
                        <F1>V1</F1>
                   </DATA>
    Then in system A, we should receive( suppose no mapping):
                   <DATA>
                        <F1>V1</F1>
                   </DATA>
                   <DATA>
                        <F1>V1</F1>
                   </DATA>
    While in system B, we should recieve:
                   <DATA>
                        <F1>V2</F1>
                   </DATA>
    If we only use content based routing, both A and B will receive all 3 DATA.
    Any ideas? Thanks in advance.

  • Why ipad safari freezes while other web-based apps work ok?

    I tried resetting history and cookies, this fixed problem for awhile, but lasted matbe 30 minutes before safari froze again ie no progress on progress/url bar.
    All other web based apps work fine including other non-apple browser, newspaper downlod/update etc. Safari on ipad4 works ok on same wifi network, desktop imac on ethernet connection works ok too. Help suggestions appreciated.
    ozziozzi

    Hello ozziozzi,
    Thanks for using Apple Support Communities.
    Have you tried quitting the Safari app and launching it again?  How about restarting and resetting the iPad?
    Restart or reset iPad
    If something isn’t working right, try restarting iPad, forcing an app to quit, or resetting iPad.
    Restart iPad.  Hold down the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPad. To turn iPad back on, hold down the Sleep/Wake button until the Apple logo appears.
    iPad may be low on power. Connect iPad to the USB power adapter to charge. See Charge and monitor the battery.
    Force an app to quit.  Hold down the Sleep/Wake button on top of iPad for a few seconds until a red slider appears, then hold down the Home button until the app closes.
    If you can’t turn off iPad or if the problem continues, you may need to reset iPad. Do this only if you’re unable to restart iPad.
    Reset iPad.  Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
    You can reset the word dictionary, network settings, home screen layout, and location warnings. You can also erase all of your content and settings.
    Restart or reset iPad - iPad User Guide
    http://help.apple.com/ipad/7/#/iPad9a74dff0
    Take care,
    Alex H.

  • IPad air crashes while using Song Pop app three times so far.

    Is there a fix for iPad Air crashing while using apps?

    Hi there  DJ Axis,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/TS1702
    -Griff W. 

  • Lose sound while using facetime

    While using FaceTime, the person I am talking to loses the ability to hear me.  I still hear them!  Video is great.  This is from my IMAC.  Any ideas?  If we hang up and they call me back it works for awhile but then the sound goes away again.   I am using my IMAC and they are using IPAD2. 
      Model Name:          iMac
      Model Identifier:          iMac8,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.4 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          6 MB
      Memory:          1 GB
      Bus Speed:          1.07 GHz

    Im having the same issue.  done lots of hunting and can't find any fixes.  just want to let APPLE know that this is a wide spread issue.

  • IPhone 4 bought on 2010 frequently freezes while using camera or apps with adverts

    Hey there guys!
    I'm from Brazil and actually, this issue occurs with a friend of mine. As he doesn't speak english very well, i'm trying to help him out here... so, i'm gonna summarize the whole tale:
    We're from Brazil and here an iPhone is much more expensive than in the US (40% more). His brother went to Miami and brought him an iPhone 4 stuck on the AT&T account, not fully unlocked (not sure if at the time we already had the unlocked ones).
    As he got here, my friend could not use the iPhone 'cause there were no ways to do it (it was very recent) and, after a few months (3-4), he discovered an specific 'SIM Card' that could help him to use the iPhone in a brazilian carrier. At that moment, he was using iPhone only for games and as an iPod.
    After that (using iOS 4.3), he used the iPhone for months. As the iOS 5 was launched, he tried to update, but then started the problems. Even using Jailbreak or not, he was not able to update the iOS to 5. He received several error messages and nothing done at the time was enough to help him. So he maintained the 4.3 iOS version.
    Now, for the last 8 months he's facing several freezes, specially while using the camera and/or apps with advertising (almost all). He tried to do almost everything. Turn the Wifi on/off, 3G on/off, everything. Tried to have more than 50% of the HardDisk free, uninstalled all applications, used jailbreak, restore to the original iOS, everything.
    We went to see some specialists here in Brazil, and they said that all their efforts on the Software was done, and only a deep analysis at the hardware would be the reason to fix it. They tried to restore, install, update, do anything with different iOSs, but they couldn't even finish the restore/update of the iOSs.
    So his final effort was to use the 4.3.1 iOS, which is the only one that 'keeps the iPhone 4 alive'. Even with some freezes during the usage, but no way else to the updates of the latest iOSs. iTunes recognizes the iPhone, starts the update, but several errors occurs and never can be completed.
    Anyone has any clues about it!? By the way, thanks for the opportunity to address and share with you our doubts and questions. I'm here to find out a way to restore this iPhone 4 and use it as a normal person.
    Thanks!

    Hey man! Thanks for the answer... actually, I’ve already tried this and still jams…  Right now, I’m using the iOS 4.3.3 which is the only one that keeps my iPhone 4 ‘usable’.
    This iOS 4.3.3 I use DOES NOT have Jailbreak. I have used the Jailbreak at the beginning, but not anymore. It was my only option in the beginning, to use it as a real iPhone, not an iPod.
    In April ’12, I’ve got it Factory Unlocked, directly through AT&T. My baseband is already updated to the latest (04.12.01) and I can use it with any carrier in Brazil. The thing is… when I try to update to the iOS 5.1.1, it goes through all the process but at the end, during the last reboot, it gets into an infinite loop (apple symbol and spinning wheel, alternating). The worst part is that iTunes recognizes my iPhone, but as it doesn’t go through the last reboot, there’s no way to go.

  • ISight Makes a SLOWER "Turn On" Sound Then "Used by Another App Message"

    I've had my iSight cam for about 4 years. When I plugged it in a couple of days ago, that quick sound it makes when it's connected (focusing sound?) was much slower. I then received the message that it is in use by another app.
    I do regular maintenance (permissions, clean caches, check pref files). I've tried another user account. I've unplugged everything and shut the computer off for at least 15 minutes. I've tried another firewire port. I'm going to reinstall the 10.4.10 combo PPC update.
    Has anyone else encountered the slow "turn on" sound to find that their iSight no longer works?
    Im afraid I'm going to have to send it away, pay $150, and get it repair. I guess that's better than paying $350 for a new one.
    Thanks.

    Hello PDXKevin
    Has anyone else encountered the slow "turn on" sound to find that their iSight no longer works?
    Not I. 
    I know you did not ask, but you may want to consider any of the following that you have not already tried before you have your iSight serviced.
    If you have changed anything recently, have you considered Possible hardware or software conflicts.
    I see you have previously posted about problems with your Firewire. Does your iSight show as a Firewire device in your System Profiler? Do other Firewire devices work when connected to the same port on your PowerBook?
    If your iSight works when connected to a different Mac but you do not see iSight in System Profiler when your iSight is connected to your PowerBook, you may have connection, cable, Firewire, or other problems with your Mac. In this case, try Apple's suggestions in What to do if your computer won't recognize a FireWire device.
    Jim
    15" PowerBook 1.67 GHz   Mac OS X (10.4.10)    G5 DP 1.8  External iSight

Maybe you are looking for