English Lightroom on German Windows: Shortcuts not working
Hello,
I have installed the English version of Lightroom 3 on a machine running a German Windows 7.
Normally I was using the following shortcuts on a German keyboard for rotating images in the library module:
Ctrl + .
Ctrl + ,
Since some update of Lightroom these shortcuts are not working anymore. I can use them only if switching Lightroom's default language to German. However I'd like to use the English version.
The English shortcuts Ctrl + [ and Ctrl + [ are not working either on a German keyboard.
Has anybody experienced the same?
Robert
Peter
I followed the directions on that post and it worked...!
here is the instructions
"Looks like InDesign is getting confused between British and US English - probably it got installed as British English, then decided it rather be US English. Why that'd be - no idea.
So, here's what you can try if your shortcut keys suddenly disappear on you:
1) Navigate to the Adobe InDesign CS4 folder
2) Go into the Presets folder
3) Go into the InDesign Shortcut Sets folder
4) If you see a folder called 'en_GB', but no folder called 'en_US', make a copy of the en_GB and rename the copy to en_US. Possibly the reverse could also happen - you see en_US, you might want to try and copy it to en_GB."
Thank you so much to you and Kris for this helpful information.
Similar Messages
-
Windows shortcuts not working (intermittently)
Ever since I started using my T440s (Windows 7 pro) the short cut keys haven't been working all the time. Windows + L will not lock my computer. But, Ctrl - C and Ctrl - V work. And I can't get the computer out of sleep mode.
I have just run about 25 updates for the Lenovo and rebooted.
Any thoughts?Do you have an extra keyboard you can connect to see if it is a keyboard issue or a windows issue?
Hoov
Microsoft MVP - Consumer Security
SpywareHammer.com -
Why can I not import pictures any more?
Lightroom says "Your Lightroom 5 64-bit does not work correctly"
Technical informations:
PC with Windows 7 64-bit, Lightroom 5.7.1 64-bit installed.
What I have done:
I downloaded the newest LR 5.71 and installed it again - mode repair; without success
I checked my PC with Norton 360: full scanning and optimizing registry
I restarted the PC and than I installed the LR 5.7 again - repair
Trouble 1:
Two days ago I could work with my LR 5 and to import pictures from a SD was no problem. Now I can start LR 5 and I can watch/modify pictures, but as soon as I try to import new pictures LR 5 stops and gives the message "your LR 5 64-bit does not work correctly - searching for solution". I have not changed anything in my computer since lasttime LR 5 worked properly, only the registry was optimized by Norton 360.
Trouble 2:
I live in Switzerland and my language ist German. I dit not find a place where I can present my problem in German, e.g. a phone number oder email-address oder german-chat. My English is to week for a discussion for computer problems and do understand it.
Help:
I would very appreciate if anybody can help me, either to trouble 1 or to trouble 2. Thanks.Sehen Sie diesen Beitrag:
Photoshop CS4 & Lightroom 2.6 X64 funktionieren nicht mehr
Wacom Tablet-Treiber-Problem? -
PS5 Action Keyboard Shortcuts Not Working
PS5 Action Keyboard Shortcuts Not Working -- Running 10.6.7 on a Mac Pro. Any suggestions?
I've tried restarting, changing key combinations, etc. Nothing works and I'm wasting time using my mouse...
Any help is greatly appreciated.I had this problem too but using Windows 7. I tried resetting, renaming the shortcuts, swearing loudly, none of it worked. I found out it was a totally unrelated program, Xfinity Protection Suite, that was the culprit. My virus protection program added it as an 'upgrade.' AFter I uninstalled it everything was back to normal. Have you installed anything new onto your computer lately that could be interfering?
-
Firefox beta 21.0 shortcuts not working os x 10.8.3
All keyboard shortcuts not working.
Keyboard shortcuts working in other apps eg LibreOffice
Am using keyboard shortcut program ikey for OS X - but has worked with FF before.
THanksHello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you. -
Safari keyboard shortcut not working
Hi
Safari keyboard shortcut not working right.
I have 6 website in favourite bookmark. When press cmd + 1 should load 1st website in favourite folder. Nothing happen. Same cmd + 2, cmd + 3 etc.
Now cmd + 1 keep add ':)' smiley text emotion instead.
I have reset keyboard shortcut default in System Preference Keyboard but nothing change.From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test. -
Adobe Bridge CS5 in windows 7 not working?
Adobe Bridge CS5 in windows 7 not working. I was using bridge perfectly for last 2 years. It stops working since 3 days. I tried to install updates. Showing some error to install.
Tried to install creative cloud..again some error. Error code : 82
Could you please advice how I can fix my adobe bridge.https://www.youtube.com/watch?v=xDYpTOoV81Q&feature=youtu.be
please check this video I uploaded..this is what happens when I click adobe bridge.. just blinks and go off. bridge not working on task manager -
Why the buttons created by Acrobat XI in window do not work in android mobile or ipod touch?
Why the buttons created by Acrobat XI in window do not work in android mobile or ipod touch?
Hi,
Could you please send us a test file which has those form buttons? Please email that file to us at DL-adobereader-android <[email protected]>
Thanks,
- Reader Mobile team -
CMD+ shortcuts not working in Dreamweaver CS3
I'm have a very strange issue with CMD+ keyboard shortcuts
not working in Dreamweaver CS3 on OSX 10.5. These actions are
working from the menus (i.e., copy, cut, paste, etc.). CMD+
shortcuts work in other CS3 apps. I've searched this forum and
googled up and down and found some references to issues like this
with Dreamweaver 8, but nothing for CS3.
Has anyone experienced this problem? I'm completely stumped.
LawrenceMy concern wasn't with the navbar, but thanks for the headsup.
The problem is that the link in the upper left hand corner, Suzie's Story, is a rollover image but it does not reveal the other image when the cursor goes over it.
<div id="topTabs1">
<div align="center"><a href="http://www.google.com" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('suzie','','Images/Suzie's Story Tab_light.jpg',1)"><img src="Images/Suzie's Story Tab_black.jpg" alt="suzie" name="suzie" width="75" height="45" border="0" id="suzie" /></a></div>
</div>
#topTabs1 {
width: 75px;
height: 45px;
float: left;
background-color: #ffffff;
padding-left: 0px;
padding-right: 0px -
Popups: Navigation from view to window does not work
Hi,
I open a second window as popup. This window has 2 views embedded, displaying view1 first. On some actions I would like to navigate to view2.
Defining an outbound plug on view1 and an inbound plug on view2, connecting them and firing the outbound withith the onaction works absolutely fine.
However, for some reasons I would like to avoid a direct navigation, but would like to navigate from view1 to the popupo window and from there to view2 (or maybe another view, ofcourse also embedded in the same popup window). Unfortunately I fail on this scenario - I can fire the view-to-window plug, but the destination on the window side (handle in method) is never reached.
Since the same concept works fine on non-popup windows I wonder whether a navigation from view to embedded window does not work for popups?
Any idea?Hi Yashpal,
no, just one window.
The first link is view1 -> window, the second window -> view2.
I.e., I fire in the view the outbound plug, which is connected with its window.
In the window I fire an outbound plug, which is connected to view2.
In theory this should work - for non-popup windows I do not have any problem at all, however, for popup windows the navigation from view1 to the window is not processed.
In the meantime I played a little bit further: Instead of firing a navigation from view1, I now fire an event defined in the component contoller, on which an event method is registered within the window. Doing so, I reach the window, which I didn't reach via the navigation link. Once in the window, firing to view2 works just fine ...
Hope the issue is a bit clearer now. Also I found a solution, I am surprised that the simpler way via navigation does not work. -
iTunes drag to import new songs in library or to create playlists from folders on windows does not work!
WHY? I have to solve, how can I do? Thank youup
-
Photoshop: full screen mode shortcut not working
photoshop: full screen mode shortcut not working, if i press shirt+alt+ctr key then i delete the file, what happen ?
Could you elaborate?
F is the default shorcut for »Change Screen Mode« for me, so I’m not sure what you want with the qualifier keys.
Have you changed your Edit > Keyboard Shortcut? -
Lightroom 5 radial filter is not working
lightroom 5 radial filter is not working. It was working fine, but now I can't apply a radial
Filter at all. I tried everything but no luck
Hardware: MacPro 3.2ghz OS 10.8.4/24GB/ photoshop CCCould you define "everything" and "not working"
Have you tried:
Clicking the word "new"
Pressing the "H" key to show the pins.
Quitting and restarting Lightroom.
Creating a new catalog to test. -
Safari 5.1 customized keyboard shortcut not working
I've just updated safari on snow leopard and my customized keyboard shortcut: go to next/previous panel (ctrl -> and ctrl <-) don't work anymore even if i set them in my system preferences
I'm also experiencing issues with custom keyboard shortcuts not working after the update to Safari 5.1. I had no problems with the previous version of Safari.... I wish I had not updated.
-
Same issue Network Discovery not working and Windows Update not working
I've read the threads.
This is a Vista Ultimate upgrade. My OOOOH My I have clocked 8 hours
Everything was working before. I tried all of the recommended services turning on restarting.
Also, ran into the problem of my memory being eaten. Suspected cause hibernate mode, which I had to disable. Scott Hasselman blog recommended the fix which is a cheap work around that limits machines functionality!!
I'm and IT Engineer specializing in MS product lines since Windows 1.0. MFC foundation classes etc.. What is the real problem ?
I don't have the NetBIOS over tcp/ip in my services?
I figure that the cost of my time and other individuals pays for the OS four times over. Give me a Microsoft developer subscription or something to make me happy. This is my development machine and I'm loosing time and money.
FYI, Just upgraded my second machine to Windows 8.1 OMG !!2 Hours to upgrade after the download. I loose my configuration settings. I required to have a Windows Live whatever account!!! This is not the way to compete and keep customers.
Windows XP has been by far the best deployment experience. I need a Knowledge base that gives solutions , not a troubleshooting scenario that does or does not work!!
Please , don't tell me to go and by a OEM Surface I cannot recommend this to my clients.
Thank YouHi,
If it worked previously, a quick solution is to run System Restore and get back to the previous status when the issue didn’t occur.
What is System Restore?
http://windows.microsoft.com/en-us/windows7/What-is-System-Restore
When you turn on network discovery, do you get any error prompt?
Please check if you have any error message about network discovery in event viewer.
Open Event Viewer
http://windows.microsoft.com/en-US/windows7/Open-Event-Viewer
What information appears in event logs (Event Viewer)?
http://windows.microsoft.com/en-US/windows7/What-information-appears-in-event-logs-Event-Viewer
Please use Windows Live SkyDrive (http://www.skydrive.live.com/) to upload the Error logs to a public folder and share the URLs with us.
Also, please temporarily turn off your firewall and all the security programs for a test.
As far as I know, Network discovery requires that the DNS Client, DNS Client, Network Connections, Network Location Awareness, Remote Procedure Call (RPC), Function Discovery
Resource Publication, TCP/IP Netbios helper, SSDP Discovery, and UPnP Device Host services are started and set to automatic.
You should check again if you have started all these services.
Regarding the update issue, I suggest you try the following suggestions.
1. Temporarily disable firewall and antivirus program to test the issue.
2. Open the Windows Update troubleshooter
http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
3. Reset Windows Update components
http://support.microsoft.com/kb/971058
You may follow the steps from the link below to fix the issue.
Windows Update Not Working.
http://support.microsoft.com/kb/555989
You may also see the common Windows Updates troubleshooting guide.
Fix Microsoft Windows Update Issues
http://support.microsoft.com/kb/906602
Hope it helps.
Regards,
Blair Deng
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Maybe you are looking for
-
# values for navigational attributes in report . (Urgent)
Hi Gurus, I have a navigational attributes for time dependent master data. In the report I am not able to see values for that navigational attribute. I see # values for the navigational attributes. I checked the master data of main info-object. every
-
Error while Creating new Position-Data fields have not been filled (no. 5A135)
Dear Consultants, My client using SAP HCM form 2008, now they want to create new positions to the existing system, To create new positions I am using T Code : PP03, while creating I am getting error "Date Fields have not been filled- Error Message No
-
I installed Adobe Creative Suite Production Premium (CS5) on a new PC (Windows 8.1). Installation was successful. I uninstalled it on old PC and de-activated it. My problem is that I can't Update. Without Updates, I can't read newer Canon photos
-
Using the bluetooth mighty mouse
My original bluetooth mouse died so I bought the new bluetooth might mouse. This is a really nice mouse. Does it go to sleep like the original bluetooth mouse? I never turned that one off.
-
Save scalar ascii data to columns
Hello, I have created a signal express project (signalexpress 2.0) that creates 60 second averages of data coming in over an NI USB-6251. It runs through a conditional repeat of aquire steps until a generated signal (time) reaches 60 seconds. This