English SharePoint 2013 Implementation Shows Russian Error Messages

I was attempting to do a repair on my SharePoint 2013 installation . I did so by coing to control Panel/ Programs . Selecting SharePoint Server 2013 then Change . On the dialog I selected Repair then it show a Russian error message in the subsequesnt
dialogue
"Microsoft SharePoint Server 2013 configuration did not complete successfully
Ошибка 1706.Необходимые файлы не найдены. Проверьте подключение к сети или работоспособность дисковода для компакт-дисков. Сведения о других возможных способах решения этой
проблемы см. в C:\Users\SVC_SP~1\AppData\Local\Temp\Setup00001a80\SETUP.CHM."
Both my Windows Server 2012 and SharePoint Installation were done in English . This is the first i'm seeing Russian Anywhere . Why would it be Showing me Russian Error Messages ?

Instead of Trying through control panel,I would recommend try running the SetUp.exe and choose the repair option.did you able to see the same file that mentioned in the path?
Anil Avula[Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

Similar Messages

Trying to link SharePoint 2010 Enterprise with SharePoint 2013 Search Server raises error

Hi,
I am currently working for a multinational who has SharePoint 2010 Enterprise Edition installed, 2 WFE SERVERS, 3 APP SERVERS, 1 DB SERVER. They also installed SharePoint 2013 Exterprise recently.
   Microsoft have recently come in and set up the SharePoint 2013 Search Server to crawl content in SharePoint 2010 as the replacement search to SharePoint 2010 Search. So they have gone through process of certificates and permissions
setups I guess. I was told it was working, but recently failed. When I type in the search box on a web site for SharePoint 2010 I get the message:
         The search request was unable to connect to the Search Service.
I checked the Event log and the Critical error (in Task Category:Timer) I get is the notorious:
The Execute method of job definition Microsoft.Office.Server.Search.Administration.CrawlReportJobDefinition (ID fa882704-80d9-415b-9b9d-eae5e9bdefd4) threw an exception. More information is included below.
        The search service is not able to connect to the machine that hosts the administration
        component. Verify that the administration component 'e9172a05-22ec-4904-9508-
        e5431a180c2b' in search application 'Search_Service_Application' is in a good state and
        try again.
I know administration component is the crawler. I am assuming this is permissions.
The SharePoint 2013 Search Server is picking up SharePoint 2010 site collections items fine i.e. The SharePoint 2013 search shows items from 2010 as expected.
On the SharePoint 2010 central admin box the search service enabled and running (checked with powershell). (SharePoint Server Search 14)
The Search Service id: e9172a05-22ec-4904-9508-e5432a180c2b
I also get the message in event log for gatherer on SharePoint 2010 CA and Search Server:
       Could not access the Search database. A generic error occurred while trying to access the database to obtain
       the schema version info.
       Context: Application 'e9172a05-22ec-4904-9508-e5431a180c2b'
Details:
            (0x80040e09)
Is this permissions to delete something from crawler??????
I would appreciate if someone could help on this. I have tried to be as concise as possible.
Thanks.
John.

It was a case that someone had fiddled with the Service App Associations. Hadn't ticked SharePoint 2013 search. Was still point at 2010. Thanks.
The SharePoint 2013 Search works correctly for SharePoint 2010.
Can someone confirm that the Search Service Application on SharePoint 2010 still needs to exist and hence SharePoint Server Search 14 Service still needs to be running? I am guessing it would as you search from 2010 interface not 2013. I am getting a critical
error in the Event Viewer:
CrawlReportJobDefinition (Id <SharePoint 2010 Crawler>)
The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component <crawler id> in search application "Search Service Application" is in a good state and try
again.
I think this is related to the fact we have SharePoint 2013 doing the search instead of 2010.
Any ideas?
John.

How to show custom error message in WebADI Excel template?

Hi,
I've created a custom Web ADI integrator and associated it with a 'Procedure' based custom interface.
WebADI Interface API Returns is set to "Error Message".
I'm using raise_application_error(-20001, "Actual Error Message") for invalid rows,but custom error message from PL/SQL is not populated on the excel template.
Instead it is showing "SQL exception occurred during PL/SQL upload".
Am I missing anything? How to show custom error message from Pl/SQL procedure to WebADI Excel template?
TIA
Narasimha

The custom API errors are visible in the BNE log but not on the Excel.
BNE Log=>
12/10/13 2:52 PM Web ADI Upload Job 13008 ERROR          BnePLSQLUpload.doUpload: Exception while uploading to PL/SQL API. Error Code: 20001, Message: ORA-20001: -Please enter CONTAINER_ID - Enter PO_NO -
ORA-06512: at "APPS.XXPO_COSTFACTS_WEBADI_PKG", line 264
ORA-06512: at line 1
12/10/13 2:52 PM Web ADI Upload Job 13008 ERROR          BnePLSQLUpload.doUpload: Stack trace: java.sql.SQLException: ORA-20001: -Please enter CONTAINER_ID - Enter PO_NO -
ORA-06512: at "APPS.XXPO_COSTFACTS_WEBADI_PKG", line 264
ORA-06512: at line 1
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:439)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:395)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:802)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:436)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:186)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:521)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:202)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1005)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1307)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3449)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3550)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4710)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
at oracle.apps.bne.integrator.upload.BnePLSQLUpload.doUpload(BnePLSQLUpload.java:284)
at oracle.apps.bne.integrator.upload.BneSAXUploader.processDeepestLevel(BneSAXUploader.java:2346)
at oracle.apps.bne.integrator.upload.BneSAXUploader.startElement(BneSAXUploader.java:1182)
at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:181)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1288)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:336)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:234)
at oracle.apps.bne.integrator.upload.BneUploader.processUpload(BneUploader.java:301)
at oracle.apps.bne.integrator.upload.BneAbstractUploader.processUpload(BneAbstractUploader.java:114)
at oracle.apps.bne.integrator.upload.async.BneAsyncUploadThread.run(BneAsyncUploadThread.java:140)
12/10/13 2:52 PM AJPRequestHandler-HTTPThreadGroup-5 WARNING        BneOracleWebAppsContext.getTimeZone CLIENT_TIMEZONE_ID has not been set
12/10/13 2:52 PM AJPRequestHandler-HTTPThreadGroup-5 ERROR          BneOracleWebAppsContext.getExtraJDBCConnection recieved the same connection as the base connection. There may be transaction problems.
How to show the same error in the excel template?
Here is the package:
CREATE OR REPLACE PACKAGE BODY APPS.XXPO_COSTFACTS_WEBADI_PKG
AS
   PROCEDURE upload_data (
                          P_CONTAINER_ID IN VARCHAR2
                        , P_SAIL_DATE IN DATE
                        , P_PO_NO IN VARCHAR2
                         ) IS
    --declare
    lv_err_msg      VARCHAR2(240);
    lf_err_flag     NUMBER := 0;
    ln_temp         NUMBER;
    BEGIN
    --------------------- checking for mandatory parameters---------------------------
      IF (P_CONTAINER_ID IS NULL) THEN
         lf_err_flag := 1;
         lv_err_msg := lv_err_msg||'-'||'Please enter CONTAINER_ID - ';
      END IF;
      -------------Validation for Sail Date Format----------------------
      IF (P_SAIL_DATE IS NULL) THEN
         lf_err_flag := 1;
         lv_err_msg := lv_err_msg || ' ' || 'Enter Sail Date - ';
      ELSE
         BEGIN
            SELECT 1
              INTO ln_temp
              FROM DUAL
             WHERE P_SAIL_DATE = TO_DATE (TO_CHAR (P_SAIL_DATE, 'DD-MON-YYYY'), 'DD-MM-YYYY');
         EXCEPTION
            WHEN NO_DATA_FOUND THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' Enter Sail date in DD-MON-YYYY Format';
            WHEN OTHERS THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' Enter Sail date in DD-MON-YYYY Format'|| SQLERRM;
         END;
      END IF;
      -------------Validation for PO_Number----------------------
      IF (P_PO_NO IS NULL) THEN
         lf_err_flag := 1;
         lv_err_msg := lv_err_msg || ' ' || 'Enter PO_NO - ';
      ELSE
         BEGIN
            SELECT count(1)
              INTO ln_temp
              FROM PO_HEADERS
             WHERE Attribute4 = P_PO_NO;
         EXCEPTION
            WHEN NO_DATA_FOUND THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' No Oracle PO for Biceps PO#'||P_PO_NO;
            WHEN OTHERS THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' Error getting the Oracle PO for Bicpes PO#'||P_PO_NO||' Error-' || SQLERRM;
         END;
      END IF;
     -----------------------Insert Record----------------------------
     IF lv_err_msg is NULL THEN
     BEGIN
         INSERT
          INTO XXP2P_HW_COST_FACTORS_STG
                 CONTAINER_ID
                ,SAIL_DATE
                ,PO_NO
                , ERROR_FLAG
                , ERROR_MSG
               ,CREATED_BY
                ,CREATION_DATE
                ,LAST_UPDATED_BY
                ,LAST_UPDATE_DATE
                ,LAST_UPDATE_LOGIN
            VALUES
                 P_CONTAINER_ID
                ,P_SAIL_DATE
                ,P_PO_NO
                ,lf_err_flag
                ,lv_err_msg
              ,FND_GLOBAL.USER_ID
                , trunc (sysdate)
                ,FND_GLOBAL.USER_ID
                , trunc (sysdate)
                ,FND_GLOBAL.LOGIN_ID
              -- commit;
              DBMS_OUTPUT.put_line
                '-' || 'After ap_invoices_interface'
        EXCEPTION
        WHEN OTHERS THEN
          ROLLBACK;
          lf_err_flag := 1;
          lv_err_msg := lv_err_msg || ' ' || 'error loading CONTAINER_ID-' || P_CONTAINER_ID || SQLERRM;
          raise_application_error(-20001, lv_err_msg);
        END;
    ELSE
          raise_application_error(-20001, lv_err_msg);
    END IF;
END upload_data;
END XXPO_COSTFACTS_WEBADI_PKG;

My windows pc is showing an error message "The file iturnes library itl cannot be read"

My windows pc is showing an error message "The file iturnes library itl cannot be read because it was created by a newer version of itunes". I have not downgraded my itunes or done anything with it other than follow standard download instructions .I have an ipad one and iphone 3g, neither work now help?

The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash

After writing an html report on a floppy disk and removing it, labview shows an error message window: disk not present

after writing an html report on a floppy disk and removing it, labview shows an error message window: disk not present.
My pc is based on asus motherboard. Labview 7 and Windows 2000 sp4 installed.
The error message continue also if i stop the application that generated report on a: .
I've got this problem only on a pc: on other machines i don't have this problem (Labview only continues to access floppy but it doesn't show any window).
Find below an example: first press the button to create a report on a: then remove the floppy, after 30-35 sec i've got the error message
Attachments:
prova.vi ‏55 KB

Hi,
I tried your vi: I don't get any error message after removing the disk but LV7 keeps on accessing the drive at regular intervals even if you stop the vi and close it!!! This is not supposed to happen.
The only way to stop it is exit LV7.
If you don't use the file dialog and you wire a full path, you don't get any problem.
I also created a very simple vi that conditionally writes a text file on a: and I got the same behaviour.
This problem occurs only with LV7, I tried the same examples in LV6.1 and everything was fine.
If anybody wants to try I attach this simple example,
Alberto
Attachments:
salva_testo1.vi ‏22 KB

How to show execution error message from a Process

hi
i have a requirement like to display the error messsage returned by the proceure.
I have a process with point After Submit and validations, where i am calling a procedure which returns the execution status with SUCCESS or FAILURE;
and if it FAILURE, it will return the error_message also, how can i show this message to the user just like how we are showing the process success message/validation message.
And i need to stop the process execution there itself once its got failed;
how can i achieve these two? anyone can give some inputs....
thanks in advance
renjish

paul and denes, thanks for the quick reply...
i tried the both option the message is coming properly. but the thing is i want to stop the execution there itself where i got the error from the procedure and the page should be remained in the same page.
currently i have a page 10(customer search screen), from there i called page 102 (customer edit screen) and in the page 102 i attached the process which includes the procedure to update the customer details;
Normally if update is success, the procedure will return SUCCESS and its navigating to the page 10(customer search screen.). so here if FAILURE is returning by procedure, i need to be in the same page i.e 102(customer edit) by showing the error message..just like a validation message...
currently whatever the procedure returns either SUCCESS or FAILURE, it goes to previous screen, but i need the method just like how the validation works if it fails.
hope you got....
regards
renjish

HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

I have the same problem, and the solutions in Error changing modules | Lightroom do not work. Even uninstalling and reinstalling a new copy did not solve the problem. As anyone got an idea what other lingering files might be causing the problem?

How to show a error message to user from report.

I don´t wanna to go in a form builder to create a simple form for just two inputs.
I have put two inputs into reports parameter screen, but I know that reports is not like forms, I cannot use SET_ITEM_PROPERTY to hide an element or put a runtime message to a label.
How can I show an error message when I validate an input from user, when some input trigger raise?
Thanks a lot!

The SRW.message doesn't show me no alert on report 10g !!!
is there any restriction that can be made to block the displaying of the alert on the web environnement?
thanks..

When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem each and every earphone am inserting goes unusable

When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(

Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy

I have disabled pop ups in my iphone but still i could n't connect to my college wifi.. It shows the error message as ensure whether the pop ups are not blocked.. pls help

Hai..
I have disabled block pop up in my iphone 5s.. but still i couldn't connect my mobile with my college wifi.. it shows the error message as "ensure all the pop ups are not blocked"....

You might want to talk to the IT dept. at your school to see if they know of a solution.

My iphone 4s is not being connected to laptop and showing an error message as it is unrecognised device

my iphone4s is not being recognised by the laptop...it is showing an error message as unrecognised device...wat would be the problem?? plzzz help!!!

Some clarifying questions, in hopes that the answers will help somebody help you:
What kind of connection (USB, WiFi, Bluetooth)?
What kind of laptop (MacBook, Windows PC; running what operating system level)?
What kind of connection are you expecting, for what purpose?
Was it working before, or is this the first time you have tried this combination?

I just brought a apple protection plan as my phone warranty is going to end in a day, when i am trying to enter the protection plan code and my phone serial no its showing an error message try after some time is there any solution to that?

i just brought a apple protection plan as my phone warranty is going to end in a day, after entering the protection plan code and my phone serial no its showing an error message "technical error try after some time", is there any solution for that?
As i need the warranty to extend for another year please help me regarding this issue.
When i bought a new iphone5 in Inda after using it for three days lock button was not working properly and it was warranty claimed and exchanged from apple service center in India, for the same phone I want to extend the warranty but its showing a error message is there any solution?

Here is some information on the applecare +:
http://www.apple.com/support/products/iphone.html
It appears that you have to buy the applecare within 30 days of buying your phone - you said that your phone warranty is almost over, so when did you buy it??? That could be the explanation for the error.

HT4790 My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages: Unable to bootstrap transaction group 2517: inconsistent crosscheck (the same with

My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages:
Unable to bootstrap transaction group 2517: inconsistent crosscheck
No valid commit checkpoint found
The volume xxxxxxxxxxxxxx(here it shows physical volume number) was found corrupt and can not be repaired.
Problems were encountered during repair of the partition map
Error: Storage system verify or repair failed.
(the same with 2518, 2519 and 2520 transaction group)
I suppose it is serious bug in Mac OS Lion managing FileVault and wonder what the help could be?

Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
Best of luck
Terry

HT4623 I am having 4S. It is showing the IOS 6 update, but whenever I try to update it, it shows an error message saying " It cannot be downloaded at this time". Can someone please tell me how to update it?

I am having 4S. It is showing the IOS 6 update, but whenever I try to update it, it shows an error message saying " It cannot be downloaded at this time". Can someone please tell me how to update it?

Make sure you have the Latest version of iTunes on your computer.
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch

Safari won't start after showing an error message: Safari can't use the extension "Omnibar" because the extension is no longer valid.

Since yesterday evening (19-01-2015) safari won't start. After clicking the safari application it shows an error message: Safari can't use the extension "Omnibar" because the extension is no longer valid.
This message almost directly disappears whereupon the Problem Report opens. I've tried to find a solution on the web but without succes.
I'm running OS X Yosemite version 10.10.1 and Safari version 8.0.2 on a:
MacBook Pro (Retina 13-inch, Mid 2014)
Processor 3 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel Iris 1536 MB
Since I updated to Yosemite I've been having multiple problems. I already read a clean install will solve most of them. But till then I would love safari to work again.
Thanks!

There is no need to download anything to solve this problem.
If Safari crashes on launch and you don't have another web browser, you should be able to launch Safari by starting up in safe mode.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those.
After removing the malware, remember to reset your home page in all the web browsers affected, if it was changed.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

English SharePoint 2013 Implementation Shows Russian Error Messages

Similar Messages

Maybe you are looking for