Enhacement for access key (badi)

pls send any one, if i want to call an subscreen in badi then i need an access key
with regards
lokeshan muniswamy

Hi,
Give the following  it will work.....
BADI Implementation = ZCL_PT_ARQ_REQ
Implementation class = ZCL_PT_ARQ_REQ_EXIT
BADI Definition = PT_ABS_REQ
Hope this helps you....
Thanks
Raj

Similar Messages

  • User exit asking for access key in CMOD

    Hi Experts,
    I am trying to write source code for an user exit in CMOD by creating a project and assigning enhancement to it.
    When i click on user exit and press change it asks for access key .
    Can you please tell me if there is any other way to write source code inside it ?

    Hi Martina,
    Kindly go through this link below ,there few steps present to work on user exits:
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    Hope it helps
    Regrds
    Mansi

  • Doesnot ask for access key. error No authorization for the 'S_DEVELOP'

    Hi,
    After applying patches,in transaction F-43 one of the field Inv Recd Date( BSEG-ZOLLD) is not getting displayed.
    after analzing we found that ZOLLD is not there in screen SAPMF05A(0302).
    in my development server when i try to change the screen it says "You have no authorization for the authorization object 'S_DEVELOP', which would allow you to change the screen concerned"
    my profiles contains sap_all and sap_new rights even then I am getting this error.
    Why doesnt it ask for access key ?
    Kindly guide me .
    Regard

    > Please check in Su24, if iy has S_develop object or not,
    In SU24? why? and what or who is "iy"?
    > since you say you have SAP_ALL access please regenerate SAP_ALL its a composite profile this should work fine.
    What does the fact that it is a composite profile matter? Besides that I've already made a remark about regenerating it.
    > But you need to check at SU24 against f-43 whether S_develop missing or not,if missing please insert manually
    Ehm, do you really think the SU24 settings for a transaction influence the changeability of it's underlying screens/programs etc? It will not matter at all what you do with S_DEVELOP in SU24.

  • Userexit asking for access key in CMOD

    Hi Experts,
    I am trying to write source code for an user exit in CMOD by creating a project and assigning enhancement to it.
    When i click on user exit and press change it asks for access key .
    Can you please tell me if there is any other way to write source code inside it ?

    Hi
    1) Create the project
    2) add the enhancments
    3) Double click on the EXIT_**********
    4) Place the cursor at the include double click and hit the enter so that you will get a pop up asking to create that include
    5) write the code & activate it
    6) back to enhancemnt screen and activate .
    You should not enter in into the exit in change mode, enter into the exit(f.m) in display mode and then Place the cursor at the include double click and hit the enter so that you will get a pop up asking to create that include so that you can write the code in that include and activate.
    Thaks & Regards
    Mallik

  • Problem in writing a  code MENU EXIT.. it is asking for access key.

    Hi,
    I have a problem in creating a menu exit.
    while am creating a menu exit i went to CUS to write code but it is asking for Access Key..
    could anybody help me regarding this..??
    Thank you,
    Praveen Dubasi.

    Is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
    If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorisations have the correct information on file.
    And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store

  • Sap netweaver 7.0 abab trial version asking for access key...???

    Hi all,
    I have just installed minisap and I am trying to create my first program but I get ask for an access key that I don´t know where to find.
    Does anybody have any idea of what this is and where can I get it?
    thanks in advance.
    CRV

    Hi CRV,
    Access key is an obligatory key for ABAP developer. Only after filling it in, you can create and modify your programs in abap editor. You can search and download the access key generator on internet. There are a lot of websites provide this.
    Regards
    Rake

  • Asking for Access Key & register in OSS

    Hi All,
    Can anybody tell me that, while i am tring to create Generic datasource for Transaction data in BI 7, it is asking me <b>Access Key</b> and Register in <b>OSS</b>
    What would be the reason for this...
    Regards,
    Kiran Telkar

    The reason is you are developing new content within the SAP system, it requires an Access Key, you need to request this from your Basis team and you enter the code into Object you want to create and you will gain access and be able to create.

  • Create Badi for Virtual Key Figure

    Hi experts,
    i have to create badi for virtual key figure in BIW for dat i m creating Badi in BI development but its asking for Access Key.
    Badi name is RSR_OLAP_BADI
    i want to know while creating classic Badi with Implementation Name do developer need access key or thr any othr way to develop Badi for Virtual Key Figure.
    Tell me for creating virtual key figure in biw we use Badi and for dat we have to create the Badi in BIW Dev. or in R/3 Dev.
    it first time dat i m creating BAdi.
    Ankit
    Edited by: ankit375 on Feb 3, 2011 11:14 AM
    Edited by: ankit375 on Feb 3, 2011 11:14 AM

    To see how to create this BADI see here:
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/90b2babc-15ad-2d10-c4b2-bd3af67d86b1
    You you need to be registered as developer (you have to have dev.key) to do the coding.

  • ABAP Access Key for Table change mode MCVKUSR & MCVBAPUSR in SE11

    Dear All,
    I'm using SAP ECC6.0. I want to create a new database table in the dictionary to be used in my programs. I proceed in the following way:
    1.  I run the SE11 transaction
    2.  At the first entry I write the name of the table to be Change created ( Display mode Showing )
    3.  I click on the change button.
    4. It will ask for Access Key
    But then the system asks me an Access Key , where can I get this?
    I have SAP License Key.
    DB Table Name : MCVBAPUSR & MCVKUSR
    Please Let me know
    Thanks in advance,

    Dear ,
    I go to Service market Place site, from SSCR Tab then I have to select a object from the list is TABL.
    and enter the Particular Object & Table Name . Now I got it Access key for Particular Object.
    Thank you for your quick Response.
    Once again Thank u.
    Regards
    Thomas.T
    Edited by: thomas_raja on Jun 5, 2011 6:24 AM

  • Access key for the Object  !!!

    Hi,
    In the ABAP Trial version 7.0, while I am trying to create a sample database table 'MYTABLE'  through SE11 it is prompting to register object of R3TR and asking for access key..
    From where I can get the access key for this trial version7.0? How can I proceed? Please help me.
    Regards,
    Praveen
    (ABAP-Beginer)

    Hi,
    Actually i am not the best person its a basic question anybody in this forum can answer.
    i am giving u  a link which i got  from Raymond Guiseppi
    Check this link.
    http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
    Forum is there to help you.
    Best Regards,
    K..P.N

  • How to get Access key for ABAP Program development in HANA Studio

    Hi,
    I have got instance for ABAP on HANA development system.
    But while creating new program it is asking me for Access key, since I do not have user id pwd for service market place I couldnt able to create the access key.
    Can any one suggest the way to create ACCESS KEY??
    Thanks,
    Ram

    Dear Ram,
    it seems that you need to follow the chapter 6.1 in the documentation...:
    Kind regards, Stephan

  • Where can I find an Access key for the user with "AS ABAP sneak preview" ?

    Hi all,
    I have installed AS ABAP sneak preview on my laptop.
    I use username "bcuser" and password "minisap". when I try to create some objects like, i.e. Function Group for Function Module, then it ask for an access key.
    Where can I find an access key for this ABAP SNEAK PREVIEW for user "bcuser"?
    I have gone thru some documents, I know we need to register user in OSS and need to get an access key from the marketplace but can I register this user "bcuser" or it's already register? I need some more specific information to resolve this issue.
    Please advise me on above question.
    Thanks,
    Haresh Solanki

    Hi Rich,
    I have entered ZH_XYZ as a Function Group name to create a new function group. While I am creating it, it asks for the Access Key. I tries to enter an Access Key here for the first time and it says wrong entry for access key.
    Also if I try to create new Function Module, it ask me to select the Function Group. As I couldn't create a new Function Group, I tried to select from existing(from SAP System's FG), still it asks for an access key, I enter the an Access Key here, then also it says wrong entry.
    I really got confused with this Access Key thing, can you provide me some insights?
    Thanks,
    Haresh Solanki

  • Oss problem for getting Access Key

    Hi all,
          I have installed mini SAP . my license was expired that i have renewed... Now  I have logged on using   uname = bcuser .
           The problem is-- when I creating any program using se38, I am getting a pop up screen titled "Add  Developer".
    In that screen, asking for Access Key.. Also , You are not registered as Developer.  Please register in the OSS.In OSS you will  get Access Key..
          I tried lot , but unable to solve it.. Please give  me  the detailed solution for this..
         Thanks in Advance,
            Somu

    Please enter the following code as your developer key for the Sneak Preview NSP system.
    29671482393151224771
    Regards,
    Rich Heilman

  • User exits access key

    To display net weights of the item in inbound and outbound deliveries i am using exit EXIT_SAPLV50Q_001 but when i click on the include in this Function module i am getting You attempted to create a program name beginning with ZX but this name range is reserved only for includes of exit function groups (function groups containing only function exits).
    and if click on change button in Function module it is asking for access key my doubt is access key is required for user exit. i dont have access key how can i do this.
    thanks in advance

    Hi
    When the system displays this mesage just press enter and it would take you to the include code. You dont have to create any thing, just press enter when this message is displayed.
    This is just a message, not an error.
    This would solve your problem.

  • Abap access key

    Dear All,
    I am new in SAP System you you explain me  when i create a program in sap  system genrate a messge for  access key  where i found these key  or any other  ???????
    Regards
    Pritpal Mehru

    Hi Pritpal,
    Welcome to SAP world.
    when you create a program in SE38 first time  system will as for Developer Key at that time you need to consult your BASIS Admin for Developer key then basis person will give you access key againest your user id.
    if you give me brief i can help you out more.
    if helpful REWARD points
    Thank you .
    Regards
    Ram

Maybe you are looking for