Enhacement for removing case sensitive of the short text entered in Me21n
Hi very one ,
i want to write a enhancement to remove the case sensitive of the short text entered in me21n transaction code for service Number . ie .. whether i enter the text in captain letter or small letters it should fetch the exact data accordingly to the short text entered ( the respective service number should be retrieved ) , i think there will be some function module that will remove this case sensitive thing . plz help me out
Regards
Syed Akbar
Thank you, Kappy, for your quick and helpful reply to my (admittedly) not very quick question!
It strikes me as odd that Apple would appear to make the use of both lower- and upper-case letters possible in the short user-name, leaving the possibility that upper-case letters might lead to some problems/conflicts down the line. It would be helpful if they'd provide some explanation about this. Anyway, as I said, I'm very far from being an expert in all this, and appreciate that people like yourself on these
forums are willing to provide helpful feedback.
Best regards,
Stephen
Similar Messages
-
Time Machine error: a disk you are backing up is case sensitive, but the backup disk is not.
How do I reformat my backup drive to backup a case sensitive hard drive?See here, for example. Do not select MS-DOS, but use the default "Mac OS Extended".
-
Hi,
Time Machine won't back up files on another external hard drive as it says it is case sensitive. The other drive contains mainly music and pictures.
Thanks for any suggestions,
LisaSee pink box on this page:
http://pondini.org/TM/5.html -
Revision: 15795
Revision: 15795
Author: [email protected]
Date: 2010-04-28 14:01:58 -0700 (Wed, 28 Apr 2010)
Log Message:
Initial check-in for removing unused rsls and the include-inheritance-dependencies-only features.
Changes to implement ?\226?\128?\147remove-unused-rsls feature. When the configuration option is true, RSLs associated with RSLs that are not used by the application are not loaded at runtime. The compiler logs the primary RSLs that are required with the number of failovers, if any.
compiler/src/java/flex2/compiler/common/Configuration.java
add ?\226?\128?\147remove-unused-rsls and ?\226?\128?\147include-inheritance-dependencies-only.
compiler/src/java/flex2/compiler/CompilerSwcContext.java
pass rslGroup to getSwcGroup.
compiler/src/java/flex2/compiler/swc/SwcCache.java
Add parameter to getSwcGroup to a group of rsls can be passed in.
compiler/src/java/flex2/compiler/swc/SwcGroup.java
Add a SwcGroup constructor that accepts a SwcGroup of Rsls. Use the RSLs to give preference to scripts that come from RSLs when duplicate scripts are merged.
compiler/src/java/flex2/tools/CompcPreLink.java
compiler/src/java/flex2/tools/PreLink.java
Find the set of SWCs that are contributing code to the application. Use this set to restrict which RSLs are written to the generated root class. Log the RSLs that are required to give the user some feedback.
compiler/src/java/flex2/tools_en.propertiesAh, ok. I was in the assumption the PCI connect had something to do with the video connection. But it seems like Apple wanted to reinvented PCIe...
I'm out of my territory here so feel free to ignore the following.
These are the things I notice in your Xorg.0.log:
[ 19.474] (==) modesetting(G0): Depth 24, (==) framebuffer bpp 32
[ 19.474] (==) modesetting(G0): RGB weight 888
[ 19.474] (==) modesetting(G0): Default visual is TrueColor
[ 19.474] (II) modesetting(G0): ShadowFB: preferred YES, enabled YES
[ 19.500] (II) modesetting(G0): Output VGA-1-0 has no monitor section
[ 19.526] (II) modesetting(G0): EDID for output VGA-1-0
[ 19.526] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 19.526] (==) modesetting(G0): DPI set to (96, 96)
What the hell is modesetting doing there?
And have you tried the nvidia blob? It could be that this is not well supported by nouveau. Maybe check up with their IRC / mailing list. -
If we can increase the length of the Short Text field in a purchase order?
Hi Experts,
Please suggest if we can increase the length of the Short Text field in a purchase order?
If yes, How? and what will be the impact?
Thanks
GavarDear Arpit,
You can use PO Text field for long description of the material.
Regards,
Manish Jain -
How to get the short text in tcode "msc3n" -- Basic data 2 -- short text.
I have to display the short text in my report output.
How to get the short text in tcode "msc3n" ( msc3n --> Basic data 2 --> short text.)?
Is there any function module availble to get this short text or is this stored in any data base table ?
Please help me. Your help will be highly appreaciated.
THANKS.Hi,
Use FM 'READ_TEXT' to get this values.
Say for exampele my material is 1900001 and batch is 0000000517.
Then my parameters to the FM will be as follows:-
Text Name 000000000001900001 0000000517
Language EN
Text ID VERM
Text Object CHARGE
This information you can get as follows.
Open the short text window in the text editor.
Here you can enter the long text.
In the editor Go to Header and you will find the details.
Please note that the text name will comprise of
Material
Batch
Plant
Stor. Location
if all the details are given.
I hope this helps you.
Regards,
Ankur Parab -
How to change the short text in a model service specification??
Hi,
I've tried changing a model service specification using the transaction code ML11 but couldnt change the short text language from German to English.Hi
One possibility is to Maintain the languages in the Additional data tab under description in the material master record for your Services . Please check wether both the languages are maintained or not . Please correct me if i am wrong .
regards
kp -
REUSE_ALV_GRID_DISPLAY with editable field -- Get the short text
Hi everybody,
I would like to know if you can resolve the following problem:
I have an editable column in my ALV grid with a match code. When the user choise the value in the range, this value is displayed in the grid. But I would like to display the short text and not the fix value like actually.
Have you got an idea?
Thank you in advance.
Best regards,
RobinYou could add another column for the text and change it's contents when the editable field changes.
-
How to change the Short text of a GUI Status .
Hi Guys ,
Can any one guide me on how to change the short text of an already existing GUI Status .
I have already tried doing these :Opened the GUI Status in change mode and changed the short texts of the Application tool bar ,
Menu Bar ,
Function Keys ,
thinking that this will update in the Short text .. but that didnt happen ...
Below is what I need ...
Requirement :
GUI Status : Status_001 .
Short Text : New GUI Status .
Change the Short Text to " Changed GUI Status ' .
Regards,
RanjitaHi Ranjita,
Do this...
go to SE80
Open the program.. open node GUI Status
Double click on the status you want to change
go to menu GOTO>ATTRIBUTES>STATUS
click on continue or simply enter
Here change the short text and continue or enter
activate it
Hope this helps..
Regards,
Kinshuk -
Dear all,
I am using a MacBook Pro, and have been using this machine for so many months. When I started using it, I formatted it as Case-Sensitive HFS. However, by this time, Case-Sensitive is causing so many of my programs to not work correctly. So, I would like to remove it.
What would be the most effective way to reformat my MacBook Pro to use Case-Insensitive HFS, and putting all of my applications/data/preferences back on to it with out any hassles. I have an external Firewire HD. Is there a program that would automate this process for me? Or am I just so out of luck and have to go to the tedious backup and restore process.Use the Restore option of Disk Utility to clone your system to the external drive. Format the external drive using Mac OS Extended (Journaled) and partition it using the GUID partition scheme. Then boot from the external drive and repartition and format the internal drive. Then using Restore clone back from the external drive to the internal drive.
Partition and Format a Non-startup Drive
1. Open Disk Utility in the Utilities folder.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Click on the Option button and check the option for the GUID partition scheme, then click OK. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the startup or source volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Drag the startup or source volume to the Source entry field.
5. Select the backup or destination volume from the leftside list and drag it to the Destination entry field.
6. Check the box to Erase Destination. Skip this step if you've already formatted the drive.
7. Double-check you got it right, then click on the Restore button. -
Removing case-sensitivity requirement on Mac OS X?
I found the statement
"You cannot install Adobe products on a volume that uses a case-sensitive file system, such as HSFX (HFS+) or UFS. This limitation applies to both the startup drive as well as the drive onto which the software is installed."
on the support site at http://helpx.adobe.com/creative-suite/kb/error-case-sensitive-drives-supported.html.
Why? Are you actively working on removing this limitation?
(I have other software I must use that has the opposite condition — it requires HSFX. I have submitted the reverse request to them.)
Thank you!Hi Soren42,
Unfortunately Adobe products cannot be installed on a volume that uses a case-sensitive file system, such as HSFX (HFS+) or UFS. This is a software limitation and is as designed.
You can fill out the feature request form ( https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform ) to request new features or suggest modifications to existing features.
Regards,
Rave -
How to get the short text values from F4 SEARCH HELP
Hi Friends,
My requirement is in Module -pool Screen Programming, i have Designed one field in a custom screen and provided a F4 search help to that field..
For eg the F4 help is displayed as below.
Value short text
1 A
2 B
3 C
4 D
5 E
6 F
7 G
When i select the first option (1) then value 1 appears in the field.
now i want the text relevant to the value 1 to appear by the side of the field.
Eg : 1 A (A should appear by the side of the value 1)
How do i achieve it?
Kindly help me.
Regards,
K.S.Kannan.
Edited by: kannan ks on Dec 8, 2008 4:05 PMhi
1) place a field adjacent to your value field on which F4 is operated
so now you will have 2 fields.
iam considering it as for ex: field1 & field2
2)
BOLD one is import in FM call
CLEAR: t_dynpfld_mapping,
e_dynpfld_mapping.
e_dynpfld_mapping-fldname = 'F0001'.
e_dynpfld_mapping-dyfldname = -
> name of field1 (for ex: your 1 value field name)
APPEND e_dynpfld_mapping TO t_dynpfld_mapping.
e_dynpfld_mapping-fldname = 'F0002'.
e_dynpfld_mapping-dyfldname = -
> name of field2 (for ex: your short text field name)
APPEND e_dynpfld_mapping TO t_dynpfld_mapping.
3))))))))
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield =
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = -
> name of field1 (for ex: your 1 value field name)
value_org = 'S'
TABLES
value_tab = itab
dynpfld_mapping = t_dynpfld_mapping
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3 -
Display the all text entered for all folder at Item and Header level of PO
Hi everybody,
I have the task like the following :
In a PO there are text folders available at Header and Item level. I want POs with type Purchasing document type u2018ZFu2019 ( First Article PO ) should display all the texts entered into any of these folders either at Header level or Item level during print preview and PO output like Purchasing document type u2018NBu2019 ( Standard PO ).
u2022 The technical information relating above subject ( SAPScript ):
o The layout set ( form ): ZPCC_PURCHOR_STD
o Print program : SAPLMEDRUCK
u2022 The problems like the following :
o I found out the differences in debugging of 2 types of Purchasing document type u2018ZFu2019 and u2018NBu2019 .
o Only Purchasing document type u2018NBu2019 the print program processes Text Elements (HEADER_TEXT, ITEM_TEXT, SUPPL_TEXT) to display all the texts entered into any of these folders either at Header level or Item level.
o To control the displaying of Text Elements as I know I need a print program, however, our print program is standard print program of SAP system in this case. So I can not make any changes there.
Do we have the configuration place to this one.
Please help me to fix the problem. Thank you in advance !Hi
I advise to use the subroutine pool as your sapscript is the bespoke one ( Z one) . So you can make use of the below pseudo code.
In the sapscript the point where you want to display the text include the following code (
Assume that your are print header text Then first find out the Co-ordinates for it .Go to me23n->Text tab-> In change mode -> double click on text editor-> which takes you to sapscript layout->Under Go to -> Click on header & get the following details.
Text name : ekko-ebeln
Language : ekk-spras
TEXT ID : F01
TEXT OBJECT : EKKO.
/: DEFINE &V_ID& = 'F01'
/: DEFINE &V_OBJECT& = 'EKKO'.
/: DEFINE &V_LINE1&
/: DEFINE &V_LINE2&
/: DEFINE &V_LINE&
/: PERFORM GET_HEDER TEXT in program Z_PURCHASE_TEXT
/: USING &EKKO-EBELN&
/: USING &EKKP-SPRAS&
/: USING &V_ID&
/: USING &V_OBJECT&
/: CHANGING &V_LINE1&
/: CHANGING &V_LINE2&
/: CHANGING &V_LINE3&
/: ENDPERFORM
&V_LINE1&
&V_LINE2&
&V_LINE3&
Now in the Subroutine pool Z_PURCHASE_TEXT
FORM GET_HEADER_TEXT USING IT_INPUT STRUCTURE ITCSY
CHANGING IT_OUTPUT STRUCTURE ITCSY.
LOOP AT IT_INPUT.
CASE IT_INPUT-NAME.
WHEN 'EKKO-EBELN'.
V_TEXTNM = IT_INPUT-VALUE.
WHEN 'EKKO-SPRAS'.
V_LANG = IT_INPUT-VALUE.
WHEN 'V_ID'
V_ID = IT_INPUT-VALUE.
WHEN 'V_OBJECT'.
V_OBJECT = IT_INPUT-VALUE.
ENDLOOP.
USE FUNCTION MODULE READ_TEXT BY USING ABOVE PARAMETERS AND READ THE TEXT AND FILL THE VALUE IN FIELDS IT_OUTPUT.AS BELOW.
BEFORE THAT FILL V_LINE1,2,3 AFTER GETTING A TEXT FROM READ_TEXT FUNCTION MODULE.
LOOP AT IT_OUTPUT.
CASE IT_OUTPUT-NAME.
WHEN 'V_LINE1'.
IT_OUTPUT-VALUE = V_LINE1.
WHEN 'V_LINE2'.
IT_OUTPUT-VALUE = V_LINE2.
WHEN 'V_LINE3'
IT_OUTPUT-VALUE = V_LINE2.
ENDLOOP.
ENDFORM.
Declare the valriable in the routine v_textnm,v_lang,.....
I hope this hint help you to resolve your issue. Note : the spelling of commands which i have wrote may be incorrect.
Cheers
Joginder -
How do I remove drop shadows from the default text in the labels of a Numbers pie chart?
I set up a pie chart in Numbers and set labels for percentage. The default text has drop shadowss. They do print well at the scale needed for the page. I cannot find out how to remove these shadows for clearer printing. Can the shadows be removed?
Nevermind. Found the answer in nthe side bar under "Re:how can I print the figures (text) in a chart WITHOUT a cast shadow. I had the Font window set too narrow and it did not show the Text Shadow button in the tool bar. Unclicking that worked.
-
HOW TO LENGTHEN THE SHORT TEXT FIELD IN PR-urgent
dear friends,
my client is asking to lengthen the field size of SHORT TEXT in purchase requisition. if they enter the long text, the characters are getting tranucated.
can you please provide me good solution for this problem.
who is handling this issue either functional or technical consultant.
thanks in advance.
regards,
flemmingsI think there is no configuration to change the field length. It is technical job, but needs developer key to change the std SAP field length. I recomond that donot go for this, as short text itself is 40 charecter length, there are so may text fields in TEXT tabpage. You can get these texts in PO print also...
Juts think and proceed.
Maybe you are looking for
-
How to fetch data from a SAP BW Cube via Perl/PHP on a Linux machine?
Hi all, here's the scenario: I need to fetch data from a cube of a remote SAP NetWeaver 7. The data will later be used in a web application based on Linux and Perl/PHP. (I'd prefer using perl for the backend and doing the business logic of the web
-
I recently got a new iphone but when I restored it in iTunes one of my games that I have played for months RESET. How do I get my old game info back?
-
Year-End Closing Asset Account - AJAB
Hi, While executing year end closing for fiscal year 2005, system gives following error message :- "Depreciation not posted completely" Since, there is unposted planned depreciation in period 12 / 2005, system is not allowing to close the year. But s
-
Error 404 when opening pdf files after publishing website
Hello, i included pdf files in a blog. They open properly when testet but after publishing approx. 50% of them do not show up and i receive the error 404 (file not found). Are there any suggestions? Thanks
-
AFter saving a very large file in photoshop Icant seem to call it up. DbLe clicking on the icon opens Photoshop but there is no evidence of the image. I have also triedaccessing it through the pull down menu in Photoshop and again, I can select it bu