Enhance button in CNR_VIEW

Hi Experts,
                I have a req that i have to add one custom button in CNR_VIEW in component FPM_OIF_COMPONENT,but am unable to find cnr_view in any coponent please help me where i  have to check and add button

Hi Kiran,
               Thanks for replying ....i found cnr_view but am not able to get where i have to add button in that cnr_view..in my cnr_view ( portal ) i have already existing few buttons like action log, Manger Document. .etc  in toolbar am not able to see that toolbar to add button in that view .. please help to solve this.
View info = CNR_VIEW
Configuration id = HAP_OIF_MAIN_DOC
Regards
Syed

Similar Messages

  • Use of Enhancement Button in SE38

    hi experts,
    i want to know the use of enhancement button in the <b>ABAP Editor SE38</b>. once i clicked the button the editor is freezed , i don't know what to do after this... Is this enhancement is any way related enhancement done in <b>CMOD/SMOD</b>..
    with regards,
    James..
    Valuable answers will be rewarded...

    No it is not related to CMOD/SMOD.  It is related to the new Enhancement framework.  Which is the new way of modifing standard sap code.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm
    Regards,
    Rich HEilman

  • V18: Enhanced button overlays

    I set up v18 (InDesgin CS5.5/Mac),
    and tried  "Enhanced button overlays" and viewd in customized app build by viewer builder v1.8 on iPad.
    Audio with play button and pause button works well on iPad,
    but Video with play button and pause button dosen't work on iPad.
    (Both works well in content viewer on Mac)
    For Video on iPad,
    OK: play button click at video stop -> video start
    OK: pause button click at video playing -> video pause
    NG: play button click at video play -> video freeze
    Please confirm this trouble.
    shimoawazu

    Not sure how you made the overlays or where you set the loop point.
    If you make the overlays in Photoshop or Motion and set the loop point to the final resting place, then it should work.
    http://dvdstepbystep.com/motion.php

  • Enhance button causes whole picture to turn green or red (with Pics)

    I import the pictures from my new Nikon D5000 in jpg format just fine.
    The problem lies whenever I try to enhance the images - here is a screen shot of the result I get:
    http://imgur.com/TVFiz.png
    Any solution to this?
    Would like to keep on using iPhoto and not have to switch to Lightroom or Aperture.
    Thanks

    Have you tried the very basic step of renewing the iPhoto preference file - quit iPhoto and delete it ("your username" ==> library ==> preferences ==> com.apple.iPhoto.plist) - launch iPhoto and reset any preferences you have changed and repoint iPhoto to the library if you have moved it
    LN

  • Order - Operation TAB - Enhancement Button

    Hi ,
    In which table values entered in these user fields of enhancement tab is stored. I'm referring to operation tab "enhancement sub tab".
    Regards,

    Hi,
    Check AFVU table.
    Pass AUFNR value in AFKO table to get AUFPL value. Pass AUFPL values in AFVU to get the User Fields.
    Regards,
    Maheswaran.

  • Enhance Button on ABAP Editor(ECC6.0)

    What is the use?
    Edited by: BrightSide on May 15, 2009 8:48 AM

    Hi,
    I believe you are talking about the modification which is used to insert, delete lines etc.
    Modification is used when you want to modify a SAP standard code which requires an access key whereas Enhancement is used to enhance the code without modifying the standard code. Enhancements are provided by SAP so that customers can include their own code at these enhancement spots without modifying standard code l(ike the functionality of user exit, BADI etc.)
    Regards,
    Soumya.

  • Enhance master data

    Hi
    Enhance the master data extractor 0APPLIC_ATTR extract structure RCF_S_BW_0APPLIC_ATTR with APPL_SOURCE_INFO field.
    APPL_SOURCE_INFO  for this field how can i get information for source table . ple let me know abap code also.
    regards
    suneel.

    Hi Suneel,
    These are the steps that you need to do:
    1. You need to find in which table that APPL_SOURCE_INFO data is being stored. Usually I use SE11, and check in which table that this field is being used. It will list down the list of table name.
    2. You go to RSA6, find and higlight 0APPLIC_ATTR, click on 'Enhance Extraction Structure' button to add APPL_SOURCE_INFO field into the extract structure.
    3. Once you add the new field, you enhance the function module by clicking 'Function Enhancement' button. Then you add ABAP code to get APPL_SOURCE_INFO data into your extract structure.
    Hope this will give you some ideas, if you want, I can give you a sample ABAP code.
    Cheers,
    Mona

  • How to enter Enhancement Mode of ABAP OO Classes: Add Methods, Pre-Methods.

    Hello,
    do you know how to enter the enhancement mode of the class builder?
    I want to enhance a standard global ABAP OO class by implicit enhancements for inserting methods, attributes or pre- and post-methods - as described in  <a href="http://help.sap.com/saphelp_nw70/helpdata/en/58/4fb541d3d52d31e10000000a155106/content.htm">Online help</a>.
    I start the SE24 on my NW 7.0, but there is no menu <i>Edit-> Enhancement Operations-> Enhance Class/Interface </i> as written in <a href="http://help.sap.com/saphelp_nw70/helpdata/en/86/b83142680d5c33e10000000a155106/content.htm">Online Help</a>.
    When I press the <i>Display</i> button, there is no enhancement button (the spiral), and the sub entries of menu <i>Edit-> Enhancement Operations</i>, like <i>Insert Pre-Method</i> are inactive (gray).
    In SE80 I don't find them too. The only implicit enhancements I found are on the beginning and end of methods implementation code.
    Do you have experience enhancing classes?
    Best regards
    Michael Umlauff

    Hallo Michael,
    You first have to go in se80 or se24
    Then menu Class-> Enhance
    Then you will be able to use Edit-> Enhancement Operations-> Insert Pre-Post Methodes
    Regards,
    Walter

  • Enhancement Spot in ECC 6

    Hi Gurus,
    I want to know about Explicit Enhacement spot and how it can be made and what is the use of it.if there is some screen shots available then kindly provide the link.
    Every Helpfull software will surely awarded Points.

    goto the program. click on the enhancment button(one with curled) on the tool bar.
    the screen color will change. click on goto->enhancments->show implicit enhacment.
    you will see yellow color line. chose the line wher you want to enhance and right click and select enhanment->create.
    in the dialog box, press create button. give the enhacment spot name. press ok.
    now select your enhancement name and press ok
    your enhancment will be added in the code.
    press activate to activate the point.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb54c452-0801-0010-0e84-a653307fc6fc
    Reward if useful.

  • Adding a field to a structure in an implicit enhancement option

    I'm just trying to append a field to this internal table:
    DATA: BEGIN OF gt_outtab OCCURS 0.
    DATA: knumv         LIKE ekbe-knumv.
    DATA: srvpos        LIKE ekbe-srvpos.
    DATA: ktext1        LIKE ml_esll-ktext1.
    INCLUDE             STRUCTURE mmhipo_mainlist.
    """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""$"$\SE:(4 ) Estr. GT_OUTTAB, Final                                                                                S
    DATA: END OF gt_outtab.
    DATA: gs_outtab              LIKE LINE OF gt_outtab.
    The point is that I don't know how to use the editor to write the new field on the implicit enhancement.
    Thanks guys!!

    Hi,
    After going to the particular program which you want to enhance, just click on enhancement button. (spiral one) and then take the menu path EDIT -> enhancements-> show implicit enhancements.
    Now you can see the available implicit enhancements highlighted with dark orange color.
    Right click on the one you want and select the enhancement -> create.
    Enter the implementation name and the description which you want and click on ok button.
    Now you can see the inserted implementation in your standard program.
    And in between the inserted lines you write your code and activate it.
    Reward points if you find it helpful.
    Regards,
    Prasanna

  • Interface View Enhancements

    Hello,
    I want to add inbound plug to one standard WebDynpro component.
    I've tried to enhance a Window with one inbound plug, but this plug does not appears in interface view inbound plug list.
    How to add inbound plugs to interface of standard components? Is it possible?
    Edited by: Andrey Bytchkov on Oct 31, 2010 3:25 PM

    Hi,
    I can't add neither outbount nor inbount plugs to standard component FITV_FPM_START.
    I've double clicked in interface view APPLICATION_WINDOW, but I can't click to enhance button, because it is disabled.
    Is it possible to enhance standard webdynpro component interface views plugs?
    Edited by: Andrey Bytchkov on Oct 31, 2010 9:21 PM

  • Enhancing a componnet...

    In the SAP help the instructions below are what SAP give to create an enhancement. I need to be very careful when creating enhancements, having just deleted a whole component when the wizard was used to remove an enhancement. So, I tend to double-check everyting when creating enhancements now.
    I have a component named BP_CONT and have an enhancement set of ZBP_CONT. I highlight the overview View and then click on the (Enhancement) button. However, I have to go through a different process than shown below, firstly being asked for the enhancemnt set, then for an application. In this case what is an application?. I most definately do not want to give an application of 'BP_CONT' as this is what caused an issue when we removed the last enhancement.
    I also found another link... http://wiki.sdn.sap.com/wiki/display/CRM/HowToEnhanceaWebUIComponentinSAP+CRM
    In this link the application given was ZBT111h_oppt, but the screen-shots still show the standard component BT111h_oppt, how does this work.
    Can anyone advise?.
    Jason
    Procedure
    If you want to enhance components in the BSP Component Workbench, proceed as follows:
       1.      Start transaction BSP_WD_CMPWB.
       2.      Choose the component that you want to enhance.
       3.      Choose the enhancement set that you have defined before.
       4.      Click Enhance Component and enter a name.
       5.      Select a package.
          You can create a new package in transaction SE80.
       6.      Select a view under   Browser Component Structure   Component   Views  .
          Note Note
          All gray objects have not yet been enhanced. All black objects have already been enhanced.
          End of the note.
       7.      Choose Enhance in the context menu.
          The object is created automatically in the customer namespace.
       8.      Make the necessary enhancements.
          Note Note
          The different colors of the icons to the left of the methods have the following meanings:
              Yellow means that the method is inherited*
               Green means that the method is redefined*
               Red means that the method does not exist*
          End of the note.
    Result
    In the view cluster BSPWDVC_CMP_EXT, which you can open with transaction SM34, you can see the substitution.

    Forget that I asked such a silly question. I have just read through OSS note 1122248 and all has become clear.
    I did actually quickly read through this note once before but missed the fact that if you enter a new application, like ZBPCONT, it will create it if it does not exist. To a beginner when you request to display the list of entries for the application field you naturally assume that those entries are all that can be entered. No wonder so many mistakes are made.
    The last time I created an enhancement for component BP_CONT I chose the application BP_CONT as well, which had disastrous consequences because when the enhancement was deleted it also managed to totally delete the component BP_CONT. This is a bug in the wizard (see notes 1459912 and 1399875).
    We had to create a transport from another CRM 7 system containing just that component and apply it to our system to recreate the component.
    Jas

  • How do we create Explicit enhancement ?

    Hi All,
    How do we create Explicit enhancement, when we dont have any enhancement point or section in SAP source code.
    Note: I know how to Implement point or section ..... but i like to know how can we create.
    Thanks
    A

    Hi,
    For your reference, let's see how to enhance a standard SAP program using an Implicit Enhancement
    Option.
    Let us use program RSFTP002 u2013 Itu2019s a program used to test FTP connections.
    In this example, we will unmask the currently masked password field.
    Open the program in the ABAP Editor (SE38).
    Execute it to bring up the parameter list.
    Note the asterisks in the Password field.
    To view the places where we can implement these enhancements, go back to the previous page (the one
    containing the code) and click on the Enhance button (before the Syntax Check button) or press Shift + F4.
    Note: Enhancement options are only present in SAP WAS 7.0 and above.
    Then Navigate to Edit -> Enhancement Operations -> Show Implicit Enhancement Options.
    You will be shown the places where Implicit Enhancement Options are present,
    There will be two such spots in this particular program u2013 One at the end of the result table definition and the other at the end of the program.
    To implement an enhancement option, right click in the orange area -> Enhancement Implementation -> Create.
    Choose an enhancement name (ZFTP_PWD in this case), give it a description and if needed a Composite Enhancement Implementation name and press enter.
    Save it as a local object or in a package (as the case might be).
    In this example, we shall change the visibility of the password field and show the password. This is done by looping at the screen and changing the invisible parameter of the PWD field to u20180u2019.
    Once the Enhancement Implementation is created, the following code is inserted into the program,
    $$-Start: (2)----
    ENHANCEMENT 1 ZFTP_PWD.
    ENDENHANCEMENT.
    $$-End: (2)----
    ZFTP_PWD is the name of the implementation that we gave.
    1 indicates that this is the first implementation in this program.
    We can put out code inside the ENHANCEMENTu2026ENDENHANCEMENT block as shown below.
    Follow the usual procedure of Syntax Check, Save and Activate.
    Now execute the program again to see the parameter list.
    Note that anything typed in the Password field is now visible.
    Hope this surely help u..

  • Problem in create enhancement

    i want to create enhancement, i enter into include
    ->click on enhance(shift f4),->right click on mouse,create enhancement -.
    i get-"IN THIS MODE,YOU CAN CREATE IMPLEMENTATIONS ONLY"
    what is wrong>??????????

    Hi Richi,
    Are you trying to create a enhancement spot? if your are creating enhancement spot, you should follow some steps before create the enhancement spot.
    The basic steps are.
    1. Go to the currect place where you want to create enhancement spot.
    2. click the 'Enhance' Button in the toolbar.
    3. Go to Edit->Enhancement operations->show implicit enhancement.
    4. place the cursor where you want to create.
    5. Go to Edit->Enhancement operations->create.
    check the below link.
    [Re: HOW TO CREATE  BADI IN ECC 6.0 with Enhanance Spot?|Re: HOW TO CREATE  BADI IN ECC 6.0 with Enhanance Spot?]
    [/people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement|/people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement]
    pls reward if it is helpful
    Regrads,
    Boobalan Suburaj

  • Enhance option in ECC6.0

    Hi Experts,
    Can somebody explain me the purpose of "Enhance button" (Shift + F4) in the ABAP Editor (SE38); prefrably with a small example.
    Any helpful entry will be rewarded.
    Warm regards,
    Raman.

    Enhancement spots are provided ECC6.0 onwards for making enhancements directly into the code provided by SAP without using user-exits / BADIs.
    Use Change Mode for creating enhancement points & sections.
    use button “Display <-> Change”       to switch to change mode.
    Use Enhancement Mode for creating enhancement implementations.
    use button “Change Enhancements”      to switch to Enhancement mode
    use button “Display <-> Change”      to leave Enhancement mode

Maybe you are looking for