Enhance - Convert to Black and White menu Option 'issue'...?

Just an observation, more like an infuriating 'niggle'...
When I use the 'Convert to Black and White' menu option in Photoshop Elements 10, it does a good job, but it still leaves the file in RGB format (Colour)??
I am working for a Publishers, and I keep forgetting to convert the file to Grayscale after running the Wizard.
Wouldn't it have been easier to add this as an option at the end, and have they done this in Photoshop Elements 11 (or later...)??
It seems to me to be something that you'd expect the package to do...???
Lee Cooke

No, this option isn't part of convert to black and white anywhere, since it's not something you normally want to do because it greatly limits what else you can do to your photo (many tools and commands are only available for RGB photos). I realize that in your particular situation it's an annoyance, but although I think adobe makes a lot of goofy decisions, I can see why they chose not to do that here.

Similar Messages

  • PSE Elements 9-convert to black and white not working.

    I recently bought my wife a new HP computer with Windows 7 64bit and Photoshop Elements 9 to go with it. She has not had any problems up until today.. It seems when she attempts to convert a picture into black and white, photoshop freezes up. Sometimes it will convert the image but most of the time when you go to Enhance--convert to black and white,  the little photo of what you want to conver that is on the right hand side of the screen just fills up with dots and then nothing appears on the work area.At that point you cannot close the application or anything else with out Ctrl.alt,delete. I have tried to change the programs compatibility to Windows Xp service pack 2 and 3 as well as running as admin but it does not fix this problem. As far as I know this only occurs when she tries to convert photos to black and white. What can we do? Is PSE9 not compatible with Windows 7 64?

    Suggest that you delete preferences:
    Preference settings control how Photoshop Elements displays images, cursors, and transparencies, saves files, uses plug‑ins and scratch disks, and so on. If the application exhibits unexpected behavior, the preferences file may be damaged. You can restore all preferences to their defaults.
    Press and hold Alt+Control+Shift immediately after Photoshop Elements begins launching. Click Yes to delete the Adobe Photoshop Elements settings file. 
    A new preferences file is created the next time you start Photoshop Elements. For information on a specific preference option, search for the preference name in Help.

  • How to convert a black and white tif image to colour

    I want to convert a black and white tif image to colour. I opened it in Photoshop, changed the mode to RGB colour/8, saved it as psd, but when I use the Replace Colour dialogue box, I just get my colour showing as grey-scale. What’s the correct way to proceed?
    Thank you

    What’s the correct way to proceed?
    Joke?
    In Photoshop there are often more ways than one to achieve a task and none of them need be considered »wrong« as long as the result fits the intention, so »the correct way« seems to be problematic terminology.
    Anyway, one can use a Layer set to Blend Mode Color and paint on that with whatever colors.
    Or one can use Solid Color Layers set to Blend Mode Color.
    Or Hue/Saturation Layers …
    To edit contrast if necessary Curves or Levels Adjustment Layers can be employed.
    You could also have googled »photoshop colorize black and white« …

  • Why when i convert to black and white and change, contrast, exposure etc and get it right in preview i open it and its brighter and looks different to the preview?

    The images also look different in preview and when i upload them to adobe Revel but when i put them back in photoshop they look Ok.

    I convert, in raw to black and white and add sharpness and clarity theirs and a few other options Temp etc if need be. Then i open them into photo shop as black and white. There i place around with the exposure setting but as you do it you have the preview button clicked so you see what the finished photo will look like. When i hit change normally the photo changes and looks like it was in the preview.But now with out changing any settings in photoshop, as i change the photo the preview is different when i click ok to make the changes. This comes and goes in photoshop and its getting a bit frustrating as i do a lot of black and white photos and have been doing for years but i am having this problem over the last 6 months.
    No i haven't changed colour settings i have photoshop on the preset settings.
    'Preview" when you are changing contrast etc their is the preview option so it shows in photoshop what the changes will be. But what i see when i am changing it is different when i open it. make be a point brighter or not as contrasty as i see it as i am changing the settings.

  • Imported RAW files convert to black and white

    I have LightRoom 1.4.1 as well as LightRoom beta installed.
    Intel iMac 20, OS 10.5.2
    Camera is Canon 40D.
    I imported images from a Compact Flash card into LightRoom beta. They downloaded as they should, but then without my touching mouse or keyboard they, in random order, changed from color images to black and white. I deleted them all, exited the beta, imported the same images into LightRoom 1.4.1. Same thing happened.
    I tried the Convert to DNG option, and they all imported as black and white without a preliminary color mode.
    There are no develop steps set in the import dialog.
    I imported them using the Canon import program, and they remained color images as they should. However, if I located them with the finder, though Preview showed them in color, Open With Lightroom or Photoshop CS3 brought them up as black and white.
    I'm stumped.
    There were several jpeg files on the same CF; they imported and behaved as they should.
    Arthur

    So I downloaded all the upgrades and re-installed them; rebooted, murmured incantations, re-imported photos.
    Same results--black and white photos, rendering the computer and my software useless for processing.
    Then I disconnected the card reader from my powered external USB hub, and plugged it directly into the iMac. All problems disappeared. Everything works as it should. Took a while to figure out, but my problem is solved.
    Arthur

  • "V" convert to black and white

    Somehow I hit the "V" and it is converting all my pictures to black and white.  How to I cancel that action?

    CTRL/CMD Z will go back one step.
    If you have gone to far to step back once, select them again in Grid mode of Library module and hit [ V ] again to convert them back.

  • PSC 1200 Black-and-White Print Option

    No matter the program, whenever I go to "print" I am not given the option to print black-and-white.  I use Windows Vista.  Print functionality is fine.  My PSC 1200 will scan and copy black-and-white.  It just is not a print option from any program or from the printer specs.  Does anyone know of a driver update or patch or other solution?

    Some tabs are available only when accessing the Printer Properties from the Printers folder; however, the contents of the print settings tabs are the same no matter which way they are accessed.
    From an application
    Make changes to the print settings before printing from most applications. To find these options, click File and then click Print . Click Setup or Properties to open the printer properties. Changes made to the print properties from within the application do the following:
    Do not modify the system default settings.
    The changes are temporary: When the application is closed, the settings revert to the system default settings.
    Affect only the application they are made in.
    From the Director software
    To change the print settings from the Director software, click Settings , and then click Print Settings . Changes made to the printer properties (settings) from the Director software have the following affects:
    Modify the system default settings.
    The settings are permanent and remain in effect until they are modified again.
    Affect all applications.
    From the Printers folder
    To change the print settings in the Printers folder, from the Windows desktop, click Start , click Settings and then click Printers. (In Microsoft® Windows XP, click Start, and then click Printers and Faxes .) Right-click the HP all-in-one printer driver and then click Properties .
    Changes made to the print settings from the Printer folder have the same affect as those made from the Director software. However, several additional Properties tabs are available and the Services tab is not available. The additional tabs are listed below:
    General
    Details
    Color Management
    Sharing
    Regards,
    AlmostThere 

  • Convert to black and white and then restore some of the colour (colorize

    Is it possible in Aperture to have a colour picture, reverse in black and white and from that picture restore some colors back, like ColorSplash on the iPhone.
    I know how to do it in Photoshop, but I thought is there an external editor in Aperture whom can do that?

    this pops up frequently here ...
    easy answer, use the dodge and burn plug-in to selectively desaturate the image ...

  • Scaning documents to PDF converting to black and white

    I have to scan back to back documents for my work into a PDF mode.  The documents are on colored paper so this eats up a lot of bites.  Is there a way to scan these documents and have the PDF show in black and white to conserve how much computer space that take and make uploading time less when I send them on to my employer in a secure encryped web page?

    Hi,
    You can see on very first screen (from HP scan software):
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • "convert to black and white" crashes PSE6 in mac

    Hello.
    until today, this worked flawlessly. But now, when I go to the "convert to B&W menu, the usual different B&W modes menu doesn't show up anymore, the picture instantly converts, then PSE6 crashes and has to be force quit.
    It might have to do with the automatic adobe camera raw 4 update that downloaded itself today, and which keeps saying that the update cannot be found when it tries to install.
    Any hint is appreciated.
    Thanks!
    mac pro,  OSX leopard

    Nothing downloaded itself. The updater can never update ACR, only tell you when there's a new version. You have to download and install ACR manually in PSE. I would suggest using the prefs button in the updater window to turn off automatic updates, since the only thing it ever really updates is Adobe Reader.
    Try deleting the preferences: quit PSE, then restart it while holding down command+shift+option. Keep holding the keys till you see  a window asking if you want to delete the settings file. You do.

  • How do you convert a black and white photo to color on the iphone

    please tell me how

    Hi,
    Are you sure that you are using Photoshop Touch and not Photoshop Express? We do not support the iPhone at the moment.
    If this is an Photoshop Express issue please let me know so that I can move this to the right forum.
    Thanks,
    Ignacio

  • Black and white photo with color

    how do I leave color in a black and white photo ?

    There are several ways, here is one:
    Open picture file
    Duplicate the background layer
    On the background copy layer, remove the color (Enhance>convert to black and white)
    Apply a mask to the background copy layer
    Paint with a black brush where you want to reveal the color. If you go too far, correct with a white brush.

  • Blurb Color Book Converted to Ibookstore (looks black and white?)

    Any chance my COLOR ebook from blurb would end up converted to black and white in ibookstore? Itunes approved the book. I assumed it would look exactly the same. Any way to preview it?

    That's a result of the printer using colors to provide the black color.  Don't remember the exact reason but it has to do with using the colors. Try this:  go into the printer window under the Printer preferences and look for an option to print Grayscale.  I believe that forces the printer to use only the black in cartridge in printing and should get rid of the cast.
    This is also a problem that Apple warns users of when ordering books with black and white photos, a magenta cast.

  • How to print a selection of pages from a 3000   page PDF without having to scroll two wheels! Also is there a way to set printer options for just black and white? Seems like there is a lot missing here?

    I have been using this for school work as much as possible and have come across a problem. With my lack of knowledge for apple it seems as though I can't navigate myself to a easy answer. The problem hits when I am printing pages off of a large document, and I don't want to print the entire document in color but I have no way "that I can find" for a black and white print option...
    ----- also a larger issue, when printing I need to select 1 page or even 20 pages... The time it takes to use a scroll wheel and the fact if you try and scroll fast sometimes you click off the screen then you have to start scrolling all over again... It seems like you would beagle to input from say page 1224 to 1236.... Instead I have a scroll a wheel? Just doesn't make sense...?
       Can someone please help solve this for me!

    Yes, that fixed it, thanks! I had no idea they clashed like that. I ruthlessly purged all other tables of contents, and then used Layout > Table of Contents to create a new one, and it worked.
    It made more sense after seeing in this thread that table of contents styles are more like presets or entities than styles.

  • How to set default to convert a document to a black and white pdf file?

    I have dozens of color Word files that I need to convert to black and white pdf files on a weekly cycle.  I figured out that I can do this for individual files by clicking "print", "properties", then choose the "paper/quality" tab, and then click on "black and white".  However, I cannot make the "black and white" selection permanent.  That is, the next file requires me to go through the same four-step process to convert a Word file to a black and white pdf file.  Any suggestions on how to make the "black and white" selection permenant?

    Sorry.  I forgot to mention that I am using Acrobat Adobe Pro 9.4.2.

Maybe you are looking for

  • Remote app wifi drops out constantly

    Hello, Just a quick question - When I use the Remote app on my iPhone the wifi drops out all the time. I'll open up the application, it works fine, I change a song, then after 2 or 3 minutes I'll go back to put on a different song and get the Cannot

  • Desktop Intelligence formula to convert into Web Intelligence formula

    Hi Team, I have converted Desk I Report into Web I report but below formula is not working in Web Intelligence report. Desk I formula ="Selected Period: " + UserResponse(DataProvider([Order Number]) [EIH Query]"Enter Date mm/dd/yyyy  (From)?") + " To

  • Error in getting the report from web

    HI, HERE I AM TRYING TO CREATE A REPORT FROM FORMS WHICH I WANT TO WEBENABLED. I COULD GO TILL I CAN SEE MY FORM WHERE I GIVE AS THE PARAMETERS AS 'HS' OR 'SC' OR 'YS' THROUGH THE LIST OF VALUES OR THE USER CAN JUST ENTER IF THEY KNOW THE VALUE WHICH

  • File to File multiple scenario without mapping

    Hi I am doing one simple file to file scenario without mapping i.e picking file from sender directory and then placing it in receiver directory via FTP. Now i have to take two files from different directories and place them in to different directorie

  • PM: Printing Task List Attachments When printing Shop Floor Papers

    Hi, We have PDF documents attached to our PM Task Lists. My requirement is to print out these PDF attachments when the shop floor papers (ie Maintenance Pick List) print. I am able to determine each of the files and their paths attached to the task l