Enhance key to more than 32 digits for hierarchy master data?

Dear All,
We face a big issue on master data customization on BW 3.5.
Is there a way to custo a master data with more than 32 digits in key when a hierarchy is necessary ?
Thanks in advance for your help.
CT.

In the 3 tabs of a DTP, I see nothing with something like "duplicate object". Could you give me the name of this fonction that you see plz ?
Instead, I see a tab in the datasource with something like that (Delivery of Duplicate Data Recs).
But I can't change it :(.
Edited by: Shamane Citadin on Jun 11, 2008 6:03 PM

Similar Messages

Cannot Enter more than 1000 partners in Customer master data(Partner Funct)

Dear Friends,
In Customer Master Data -> Sales Area Data -> Partner Functions-> I can able to enter 1000 partners.
Now When I am trying to enter more than 1000 partners, system is not allowing me(no lines are available to enter partner)
According to my requirement I have to enter another 500 partners(business requirement)
Please suggest me how can I able to enter more than 1000 partner in customer master.
Quick reply will be appreciated and rewarded.
Thank you

Hello,
It is very clear that, unless you change the Data element for KNVP-PARZA, the system will not allow you to maintain morethan 999 partner functions for a cusotmer master.
This is very exceptional case and I handled the situation in my project with the Duplication of customer master data for Sold to party and maintained the remaining partner functions over there.
Please check with your Business/ Architect team whether they allow this. As an alternative, they have to go with duplication of sold to party for the maintanance of additional ship to parties.
OR
Should go for char length changes for data element KNVP-PARZA (NOT RECOMENDED).
Hope it helps. Let me know if not.
Thanks,
Ram.

More than 13 digits

Hi,
Is there any solution to allow me key in more than 13 digits (without decimal place) for the amount in one transaction? (FTR_CREATE)
Thanks,
Yang

Hi, Yang
My colleagues came across that problem recently. I advised them to split the transaction and create several transaction instead thereby avoinding using more than 13 digits.
Another way that came to my mind is to create a new currency with excnage rate (say) 1:1000 . And create the transaction using this currency.
Can't say that both solutions are perfect but I am afraid these are only ones.
Konstantin.

Can we give the more than 2 decimals for key figure

Hi,
can we give the more than 2 decimals for key figure while entering the manuall planning.
Ex:There is keyfigure called 0DEBIT which is having values as 1000.00 USD, 137688.00 USD.which are displaying bydefault whenever we entered the values while planing or File.
what Customer is asking us 0DEBIT keyfigure values should be display 1000.0000 USD, 137688.0000 USD. ( added two more decimals for keyfigure value).
Can we maintained decimals more than two.........?
Thanks,
Ven
Edited by: vanarasi venkat on Apr 13, 2009 4:35 AM

Hi,
Though you can specify the no of decimal places for each keyfigure in the 2nd screen of layout builder but say if you have entered scaling factor as 1 and decimal places as 4 and user enters value as 15.2546, then in the cube it will be stored as 15.25 because physically the keyfigure can store values only upto two decimal places, so it will round up the figure to two decimal places. But, if you specify the scaling factor as 2 and decimal places as 4 than value 15.2546 will be stored in the cube as 1525.46.
If above explanation doesn't help you i finding out the solution for your requirement than you have to either change the number of decimal places in the keyfigure or tell user that technically it's not possible in BPS.
Regards,
Deepti

Can I have more than one ID for my iPad

Can I use more than one ID for my iPad, iPhone and iPod.? I am using the same for all 3 now.
My wife have one iPod and can I share my apps with her.? And if...How?
We are using the same computor for all devices.
Thanks in advance....
Best regards.....Reidar45

The spell check goes with the keyboard layout being used. Just activate both English and French in Settings > General > Keyboard and then use the Globe key to switch between them.
(I think there is bug in Pages, however, so that this doesn't work for that -- you have to change the OS language).

HELP! TextField "NUMERIC" dont let me enter more than 9 digits

Hi there,
Firstly: I 've search for this question, and I ve found an old post very similar to it.
(here is it: [http://forums.sun.com/thread.jspa?messageID=10706126] )
But, unfortunately, the aswerings did not satisfy me...
The problem is:
I have a TextField that should receive a Credit Card number, meaning, it has to have 15 or 16 numbers.
If I set it as "NUMERIC", when I run the app on my real cellphone (a SonyEricsson w810i), it dont let me enter more than 9 digits. Stringe thing here is: but on emulator, I could...
txtCardNo = new TextField("Card Number", null, 16, TextField.NUMERIC);Instead, if I set it as "ANY", user can type up to 16 numbers, but the problem is that field will accept ANY character, and I dont want that way: I want that this field input acts accepting only numbers.
How could I fix it?
Shall I use a function to mask this field? If yes, how?
Or this could be a problem of JVM implementation on this particular cell phone?
Please, send me any examples and/or links.
Thanks very much.
=Marcello=
PS1: I am quite newbie on Java things...
PS2: I am working on this using NetBeans 6.5.1 and Sun Java(TM) Wireless Toolkit 2.5.2 for CLDC

Yuo can set an ItemStateListener to the Form containing the TextField, and validate the user input in itemStateChanged(...). In case of invalid input, I would show an Alert with an appropriate message, and blank out the content of the TextField (or set it to a default value, as appropriate).
db

Restrict the user to put more than 22 digits

hi Friends,
i am using jdeveloper 11.1.1.6.0.
using below code for price , i want to restrict the user to give more than 22 digits.
if user will put more than 22 digits , system won't allow to write the digits.
<af:inputText value="#{rate.Price}" id="it2"
autoSubmit="true"
disabled="#{pageFlowScope.PriceBean.updatesAllowed ne 'Y'}"
rendered="#{rate.RateType eq 'F'}">
<af:convertNumber type="number"
maxIntegerDigits="22" maxFractionDigits="12" groupingUsed="false"/>
</af:inputText>
but it is not working.
any useful comments .
Edited by: 964331 on Mar 22, 2013 4:06 AM

Hi,
use maximumLength="22"
<af:inputText value="#{rate.Price}" id="it2" maximumLength="22"
autoSubmit="true"
disabled="#{pageFlowScope.PriceBean.updatesAllowed ne 'Y'}"
rendered="#{rate.RateType eq 'F'}">
<af:convertNumber type="number"
maxIntegerDigits="22" maxFractionDigits="12" groupingUsed="false"/>
</af:inputText>
in your inputtext
Regards,
Vikas
Edited by: 812903 on Mar 25, 2013 12:32 AM
Edited by: 812903 on Mar 25, 2013 12:32 AM
Edited by: 812903 on Mar 25, 2013 12:58 AM
Edited by: 812903 on Mar 25, 2013 12:58 AM

Has anyone used more than one event for one project?

Hi,
I have an opinion about Final Cut Pro X that hasn't changed since my first few days with it. I waited to see if I would get used to it. But, after a fair amount of time, I still am not comfortable with 'Events' and 'Projects'. The separation of the media and projects creates more problems than solutions with my workflow.
The purpose of it was to add flexibility for both the professionals and consumers using it, but my first impressions are still the same. The new Event and Project system adds complexity to organization and archiving. I wouldn't write this if it wasn't enough of a hindrance for me, that I encounter constantly. I think the new Final Cut Pro X is incredible, but this issue is definitely important to me.
Has anyone out there used more than 1 Event for 1 Project? Some of us create more than 1 Project for an Event, to make different version of a video, or for brainstorming, or to make a part 1 and part 2 of a video, but I've never had more than 1 Event for 1 Project. I don't need to use the media from multiple Events for the same Project. And I've never used it for a reason. I don't think someone will want to use their Hawaii vacation footage for a Denver vacation project, and a Florida vacation project. I think we should bring back the connection between Events and Projects in a meaningful way.
This is a throw back to the older days, but that's not always a bad thing. Let us keep our projects, or timelines, in the Events folder. Make an area above the JPG section, and PNG section, and MOV section, and call it the Projects section. Then we can easily find our Projects and add a new Project every time we need it, and organize our files quickly - without having to keep track of more windows. Final Cut Pro X is all about being more simplified than other video programs, and I think this goes right along with that idea.
Thanks,
- David

My original fear was that FCPX was just going to be iMovie Pro... It so is not!
People use the interface in different ways. I think that's what most of us like about it, it's flexibiity to accommodate different types of workflows. For me, I use the Events browser mostly like I'd be using the Finder. All the imported clips I use are referenced by the hard disks on which they reside. I know where to find them in the Event Browser and I know where to find them in the Finder. I use a lot of stock footage and therefore *reuse* a lot of stock footage from project to project. I'm not going to re-import duplicates into different events because I don't find that the least bit convenient and I do find it a terrible waste of precious HD real estate.
But that's me.
Some people like to load up everything they're going to use in a single project in a single event... I get that. You can command click your way through a bunch of clips, type E and everything is automatically arranged on your storyline in the order you selected the clips. That is *awesome*!! Instant storyline (/timeline.) Furthermore, for those that need to share projects, it's easier to bundle up the events and projects if they're all together (albeit in two different folders) on one disk (— at least they are always at the top level of the drive and easy to find.)
Keeping your Events media in a different location (satellite drives) and keeping your current project on your *fastest* drive is probably the fastest way to edit (particularly if your satellite drives are Firewire or Thunderbolt [peer-to-peer interfaces don't hog system resources].) There is little cross interference in disk accesses that way. So essentially, you can keep FCPX dealing with original clip data that doesn't need to be quite as fast, reading and writing to slower drives on your system, while letting it plow through the heavy work on your fastest access drive (usually your internal HD.)
By no means is FCPX "more simplified". It has a huge amount of power. It has all the best parts of Color, Soundtrack Pro and Motion built in. It allows you to explore *ideas* in real time rather than having to plan for them a week in advance [layout, round-tripping plans to Color, STP and/or Motion for titling or effects.] You can grab and move around elements anywhere on your "palette" with simple mouse moves and an occasional key press. The list goes on. Bottom line, it doesn't matter how you organize your events or your projects. It's all about the finished product. And for me, I can turn that around in about 1/5th the time (not claiming it's great — but I think better results in 20% of the time, on average, than it would have taken in Studio.) [Not a professional video editor -- I'm a graphic designer, and I develop Motion graphics for FCPX to make all "you guys" look better.]

How do you get the integer of a number with more than 10 digits

I can't seem to be able to get the integer of a number with more than 10 digits.
ex:
integer(12345678901.3) returns -539222987 when it should really return 12345678901
Thanks for the help
(I'm on director 11 at the moment)

You can write a Parent script to represent Big Integers. I wrote some code to get you started. It consist of two classes - "BigInt" and "Digit". At this point you can only add two "BigInts" and print out the value with a toString() function. Note that you pass a String to the "BigInt" constructor.
In the message window you could enter something like:
x = script("BigInt").new("999999999999")
y = script("BigInt").new("100000000000000000004")
z = x.add(y)
put z.toString()
And the output window will show:
-- "100000001000000000003"
Here are the two Parent scripts / Classes
-- Digit
property val
property next
on new me, anInt
val = anInt
next = 0
return me
end new
-- BigInt
property Num
property StringRep
on new me, aString
Num = script("Digit").new(Integer(aString.char[aString.length]))
curNum = Num
repeat with pos = aString.length - 1 down to 1
    curNum.next = script("Digit").new(Integer(aString.char[pos]))
    curNum = curNum.next
end repeat
return me
end new
on add me , Num2
curNum = Num
curNum2 = Num2.Num
result = curNum.val + curNum2.val
if result > 9 then
    carry = 1
else
    carry = 0
end if
result = result mod 10
sum = script("Digit").new(result)
curSum = sum
curNum = curNum.next
curNum2 = curNum2.next
repeat while curNum.ObjectP AND curNum2.ObjectP
    result = curNum.val + curNum2.val + carry
    if result > 9 then
      carry = 1
    else
      carry = 0
    end if
    result = result mod 10
    curSum.next = script("Digit").new(result)
    curSum = curSum.next
    curNum = curNum.next
    curNum2 = curNum2.next
end repeat
repeat while curNum.ObjectP
    result = curNum.val + carry
    if result > 9 then
      carry = 1
    else
      carry = 0
    end if
    result = result mod 10
    curSum.next = script("Digit").new(result)
    curSum = curSum.next
    curNum = curNum.next
end repeat
repeat while curNum2.ObjectP
    result = curNum2.val + carry
    if result > 9 then
      carry = 1
    else
      carry = 0
    end if
    result = result mod 10
    curSum.next = script("Digit").new(result)
    curSum = curSum.next
    curNum2 = curNum2.next
end repeat
StringRep = ""
me.makeString(sum)
return me.script.new(StringRep)
end add
on toString me
StringRep = ""
me.makeString(Num)
return StringRep
end toString
on makeString me, digit
if not digit then
    return
end if
me.makeString(digit.next)
put String(digit.val) after StringRep
end makeString

When recording a Video demo slide in Captivate 8, pressing the [END] key takes more than a minute to stop the recording. Why is there such a lag?

When recording a Video demo slide in Captivate 8, pressing the [END] key takes more than a minute to stop the recording. Why is there such a lag? Additionally, the software I record experiences terrible lag times. For instance, It may take 15 seconds to display a 2-digit number I typed into a blank field. the same software has no lag issues when I'm not recording it.

Yes and no. The CPTX file is on my PC. Our software that I'm making the demo of is on the network. but I'm not the "IT Guy" so I can't provide specifics; however, I work at a computer software company and we probably have more servers than employees. The network hardware is kept current. I've been making similar tutorials for 10 years and haven't run into this issue until switching to the subscription Captivate.

Can i create more than one instance for single database?

HI
anybody can tell me how to create more than one instance for single database(without using RAC)?
thanks
Kalanidhi

Anandji,
I sometimes think differently. I also think like what this person is asking..(although I have installed and administering 5 different RAC databases)
The main doubt of mine is that we create multiple instances accessing the same storage area.
Anyway the controlfiles of all instances will have the same information except the instance_names and instance id's.
Hence I always think , why can't it be possible to to create another instance in the same system and point it to a controlfile which is copied from the other instance.
Why can't the same files be shared between the two instances in a same system ?
I know I am thinking a little bit confusing...
Anyway I need to test that also...
Mahesh.

Creating more than one account for a single user

I was wondering, if I creat more than one account for me (the only person that uses my powerbook) is that going overboard? I mean, lets say I am logged into the standard account and I want to learn more about the bash shell and using terminal which I am new to, if I **** something up will the whole system be toast or will only things in that account be messed up? Like could I then just log into my admin account and delete the other messed up one? Or no? My theory was that this was a way of keeping my comp safe from myself, being that I am new to macs and moreso that I am new to the unix side of things and want to start learning the command line without worrying about screwing up my whole system. I would just use the standard account for everyday use (like what I do now) or experiment with terminal, and when I need to download something or change some settings that requires me to be logged in as admin then I would log in and download what I need then log out and use it in the standard account...am I just wasting my time? Is what I am doing any "safer" than just having one admin account and thats it?
Thanks for all the help! It feels good to be a part of the goodguys team =)
Thanks again!

Ghost,
First, I don't subscribe to the "one should not use an admin account" philosophy. For someone who is the owner and main user of any given machine, I see the use of anything but an admin account a bit anal, totally unecessary, and needlessly complicating.
On the other hand, I don't see the need for more than one admin account on any given machine. Yes, I see exceptions to this, and many people favor having a second admin account as a "backup," but I have never had more than one admin account on any of my machines, and have never encountered a situation where one would have helped.
In short, I like the idea of having a "main" admin account that is used most of the time, and then having "secondary" accounts (all non-admin) for any additional users that might log in.
Now, any limitations that apply to you as a GUI user of an account, admin or not, will apply to you at the command line as well. In other words, you can't get yourself into any more trouble at the command line than you can within the GUI. In fact, you might even be better protected at the command line than you are in the GUI. I say this because any action that would ordinarily "elevate" you above the standard capabilities of a non-admin user require the use of "sudo." Avoid the use of sudo, and you can avoid any problems.
That doesn't mean that you wouldn't be able to do something stupid that might wreck an account that contains "all of your stuff," and on which you depend. It is not likely that you would damage your System, but it is entirely conceivable that you might, for example, accidently delete or overwrite your entire HOME folder. Oops!
If you simply don't trust yourself with the command line, a second account might be a good place to experiment. Maybe create it as a non-admin account at first, with the option to change it to an admin account at a later time, when you want to learn how to use "sudo" to do more powerful things. By then, you will understand what not to do. Eventually, you will have the confidence to use the command line in your own account, which will have been an admin account all this while.
Scott

Goods receipt more than intransit quantity for SA

Hi All,
While doing a testing on stock transport order for 2 different company code, noticed that during MIGO in receiving plant system is allowing to receive more than in-intransit quantity for a schedule agreement with agreement type LP and by showing a negative stock in intransit.
Is there anyway to have the system block with error message from preventing user to receive more than intransit quantity for a schedule agreement?

negative stock in transit is not allowed.
so it must originate for a SAP bug.
E,g, OSS note 527403 explains a case for IS-OIL Industry solution.
Oss note 210472 a special case regading previous month.
I found about 60 OSS notes when searching with "in transit negative"

How to pass more than one value for one column in procedure

hi
select id, name from col_tab where dept_name in ('ECE','CIVIL');
when i was running this it is working well.
CREATE OR REPLACE PACKAGE pack_str
AS
TYPE type_refcur IS REF CURSOR;
PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur);
END pack_str;
CREATE OR REPLACE PACKAGE BODY pack_str
AS
PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur)
IS
BEGIN
OPEN ans FOR
select id,name from col_tab where dept_name in char_in ;
END str;
END pack_str;
the package was created.
my doubt is
1.how to pass more than one value for char_in (e.g ('ECE','CIVIL'))
2. when i was storing the value in string like val = 'ECE,CIVIL' ,
how to get the id,name for ECE and CIVIL.
plz help me

Hi Rebekh ,
I am recreating your packages for the desired output.
CREATE OR REPLACE PACKAGE pack_str
AS
     TYPE type_refcur IS REF CURSOR;
     PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur);
END pack_str;
CREATE OR REPLACE PACKAGE BODY pack_str
AS
     PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur)
     IS
          lv_t varchar2(200);
     BEGIN
          lv_t := REPLACE(char_in,',',''',''');
          lv_t := 'select id,name from col_tab where dept_name in (''' || lv_t || ''')' ;
          OPEN ans FOR lv_t;
     END str;
END pack_str;
Note:-
Input Parameter char_in is a comma seperated value for dept_name
-Debamalya

More than one role for a clip.Is it possible?

Is it possible assign more than one role for a clip?
thx

Only one video role, only one audio roll, per clip. Only one as these are "Media Stems", and when you work with Stems, only one roll per asset video, one per asset audio.

Enhance key to more than 32 digits for hierarchy master data?

Similar Messages

Maybe you are looking for