Enhance the Cancel billing document (VF11)

Dear Experts,
I need to enhance the Cancel billing document (VF11), with new Z filed in the header table 'VBRK'.
We enhanced the master table 'VBRK' with two new filed, is it possible to update those filed while canceling billing document?
Please guide me how to proceed further.
Reg, Hariharan.

Hi
See these notes:
SAP Note 1259505 - FAQ: New cancellation procedure in SD
SAP Note 400000 - FAQ: Transaction VF11: Cancellation of SD billing documents
Try with copy rules in VTFF.
I hope this helps you
Regards
Eduardo
Edited by: E_Hinojosa on Nov 2, 2011 9:13 AM
Edited by: E_Hinojosa on Nov 2, 2011 9:15 AM

Similar Messages

Release the Cancelled Billing Document -Error

HI,
I am a fico consultant and not aware of SD fully.Kindly help me by giving inputs.
Original Invoice document is -900000008
cancelled invoice document is 1000000014
when i try to release the cancelled invoice document 1000000014 in VF02,it is giving error like "automatic clearing off billing document 900000008 and can.doc. 1000000014 no poss".how to release the cancelled invoice.
Thanks
Prathima

Hi,
Goto T.Code : VOFA
Choose Billing type : F2
Check the following entries in Billing type.
Posting Block : If you select,system blocks automatic transfer of the billing document to accounting
Cancellation billing type - S1
Acc Determination Procedure : KOFI00 (Standard)
Choose Billing Type : S1
Acc Determination Procedure : KOFI00 (Standard)
Procedure:
Cancellation : Go to T.code VF11
Enter the Billing document : eg. 90000102 and press F8
system will cancel the billing document and generates the cancellation billing document, save the transaction.
We can release the blocked billing documents in VFX3 or goto VF02 enter billing document and choose green flag.
Goto VF02 or VF03 enter the original billing document number and press document flow button.
As per my knowledge we can't maintain external number ranges for billing documents.
Regards,
Chandrasekhar.s
Edited by: chandra sekhar S on Jul 17, 2008 8:36 AM

Cancel the cancelled billing document

HI friends,
I have cancel the billing document in VF11.but posting date was wrong so i want to cancel the cancel billing document how I can do this ?
Regards,
Chetan

Hi,
The cancelled billing document cannot be cancelled again.
What i suggest is reject the order and create a new one and correct your entries there and now invoice just once.
Reward if helpful.
Regards
Ravi

Determination of current exchange rate in the cancellation billing document

Hi All,
I have a requirement which I have described below. It would be helpful if you can mail your suggestions on the below.
Existing logic in SAP:
While CANCELLING a billing document(VF11), system copies the exchange rate from the original billing document. The same is transferred to accounting from the header of the billing document. VBRKKURRF to BKPF-KURSF.
Change Requirement:
While CANCELLING a billing document, system should determine the exchange rate based on the current date (Date of cancellation)
The same should get transferred to accounting.
Example: Invoice dated 01.01.2005 if cancelled on 15.05.2006; the exchange rate should determine the rate that is valid for 15.05.2006 and not copy from the original invoice.
So VBRKKURRF should not get copied from the Original billing document, but it should redetermine the rate based on the current date.
I need to know if there are any Exits or Bapi's or any kind of customization that I can do for this requirement.
Thanks & Regards,
Midhun.
Ph: +49 1520 4358506

Hi midhun ,
This is sai ,
I dont know whether this is precise solution for your rpoblem or not . but i have an idea regarding that
If the document is reversed then another document will be created for reversal
So in document type settings you have an option for using another exchange rate
regards
saikumar

Clearing document not generated on cancelling billing document

When we cancel a billing document through VF11 the cancelled billing document generates a reverse document. The billing document and the cancelled billing document are not getting cleared i.e they show as an open item in the customer account.

Hi ABAPER,
 1) Open Sales order means - Sales orders that contain items still to be delivered.
 2) So unless the delivery of the goods is done. They will be not shown as close order.
 3) you can VBFA to confrim these.
Any more quries. plez get back
keeping SDNing,
 SDN

Cancellation billing document has no accounting document

Dear Friends
I once cancelled a billing document through vf11. But accounting documents were not cancelled. That means the cancellation billing document did not generate accounting document.
Pls tell me how to cancel accounting documents for cancelled bill?
Thanks
Sangeeta

Hi Friends
Thanks for your response.
S1 is a SAP standard documnt type. No posting block is there in VOFA, S1 doc type.
This is an excise invoice.Eevery time I cancel billing document, accounting docuents automatically gets cancelled. But this time I am getting the error.This document cant be released to accounting.
I had to cancel the bill 85002300, as once the billing document was saved, only one accounting document( only for excise, cess, ecess and cenvat suspence) was generated instead of two accounting documents.
In cancellation document 90000174, I ckecked Account determination anaalysis, KOFI00, I found account determination took place for all the entries that were there in the billing document 85002466.
Still no accounting document cant be seen, and nither can be released.
Pls tell how to generate account document for cancellation document
Thanks
Sangeeta

Cannot post Cancellation billing document (S1)to Accounting!

Hello SAP Gurus,
I need your help.
We have upgraded from 4.7 to 5.0 ECC couple of months back. We are able to create cancellation billing documents for billing documents created before upgrade but are not able to release them to accounting.
The error message is
Tax statement item missing for tax code S0
Message no. FF805
Diagnosis
No tax item exists for tax code S0 in a G/L account item. A possible cause is an incorrect transfer of parameters by the application to the Accounting interface.
Procedure
Enter an OSS message.
However, we are able to release cancellation billing documents to accounting for billing documents created after upgrade. Its only the cancellation billing documents for the billing documents created before upgrade that have issue.
We are using external tax system for tax calculation. I have looked into the configuration settings in SAP and everything looks good.
checked OSS notes...but of no help.
Please let me know if anyone has faced similar issue . Any suggestions in this regard will be greatly appreciated.
Thanks in advance.
Raj

hi raj
i am facing a similar problem, I am on an upgrade from 4.6c to Ecc6
FF805 Tax statement item missing for tax code O0
No tax item exists for tax code O0 in a G/L account item. A possible cause is an incorrect transfer of
parameters by the application to the Accounting interface.
Just wanted to know on how u did resolve the issue.
could u mail me on [email protected]
your help would be appreciated

Accounting entry problem for cancel billing document

Hi,
We have manufacturing process for SO to DC we follow the proces
Sales order -> delivery -> VF01 -> J1IIN -> VF02 release to accounting,
now when we do the above procees in billing document document flow we can see two accounting entry generated ref. to t. code VF01 and billing document number
now to reverse the above, we are following the procedure
J1IIN reverse -> VF02 cancel billing document we get new cancel billing document numbver then again in VF02 we are releasing the cancel document number,
but earlier when we do the cancelation procedure only two accounting entries were generating under the original billing document and also under the cancel billing document, but now as soon as we reverse the invoice in J1IIN under the original billing document one additional accounting entry is coming which is generated ref. to T. code J1IH document type JM , and when we cancel and release the billing document there are three accounting entery under Cancel billing document number and additional entry is created ref. to J1IH do. no. JM
so what can be the problem hiw one entry is generated by J1IH and what is eefect of this.
regards,
zafar

in billing document document flow we can see two accounting entry generated
Yes this is standard. One for customer debit and another accounting document for excise.
thanks
G. Lakshmipathi

Cancelled billing document number missing in document flow

Hello Experts,
there is a MAM sales order in which one line item created as a separate billing document is cancelled.however in the document flow the cancelled billing document is not visible.any suggestions how to slove the issue?
Regards,
Raj

closing,as no response received.

How to change billing date in S1 - cancellation billing document

Dear Friends,
Could you please tell How to change billing date in S1 - cancellation billing document which is even not released to accounting & in gray mode.
Is it possible?
Thanks in advance.
Ranjan

Dear,
Thanks for asking exact problem.
1. PGI in 2008
2. F2 Billing date in 2003 ( By mistake by the user)
3. S1 Billing date in 2008
4. PGI reverse in 2008 & OBD deleted in 2008
So reduced billing qty is shown in report in 2008 because of S1 Billing date in 2008,
Billing qty is not matching with the actual PGI quantity.
So here if the cancellation billing document S1 could be changed for billing date in 2008, then you could balance it
Now my issue is how to balance it.
hope you find it it very interesting
Awaiting your response.
Ranjan

Block cancelling the cleared billing documents

Hi Friends,
Currently system is allowing to cancel the cleared billing document and business does want to do that, for example when F2 billing type document is cancelled then it is generating S1 type cancelled document.
I think I can prevent this by config ( in VOFA for billing type F2 under section cancellation>Copying requirements> assign 29.
And I need to do it for all billing types,
Now my queries are:
Do I need to do any config for cancelled billing type (S1) as well ?
Is there complication for doing that?
Whether I would be able to cancel the uncleared billing document in this way?
Or just I can proceed what I mentioned above.
Regards
Ashu

So I do need to assign 29 in only billing document type F2;
is there any change required for cancelled billing document type (S1)?
Yes only in F2. Not in S1.
So if accounting document of billing type is showing as
cleared then only system will not allow to cancel it.
Will it allow to cancel the billing document if accounting
document ( of type F2) is showing as not cleared?
Yes that will allow you to do so.
Say, due some price change, you want to cancel an invoice with cleared accounting doc and you are using 29 in routine. Then in that case take use of Invoice correction request / credit memo request / debit memo request based on your business requirement.
Thanks & Regards
JP

Cancelling Billing document thru VF11

Hi,
We have a dynamic credit limit set up for each of the customer. In a scenario we cancelled a billing document for Say Rs.50, in the S067 table, the open billing document value stood up as -50 and the open delivery value as Rs.50.
Can any body of you help to understand the reason behind this. This would be of great help.
Kind Regards
Narasimhan.J

HI
If I understood your question correctly, then its a normal behavior. Say for invoice number 001 the amount = 50 Rs in So67. Next step you have cancel the invoice another cancel invoice generated as 002 for -50 Rs, so this is what you looked. +50 and -50 result becomes 0.
Hence for the corresponding delivery document billing has been canceled and it became open, so delivery is displaying +50Rs as open. If you want to nullify this also then cancel your delivery document as well.
regards

Document Date in Cancel Billing Document

Hello,
When a cancel billing document is done, the document date in FI is filled with the date of the origin document. We would fill the document date in FI with the date of the day.
We tried by custumising, it doesn't run. We research userexit and we don't find.
Could you help us to find a solution ?
Thanks

use RV60AFZC
FORM USEREXIT_FILL_VBRK_VBRP
and check the document type (VBTYP = 'N' OR VBTYP = 'S') and/or the tcode (VF11)
regards
Roberto Mazzali

Credit memo request for a cancelled billing document

Hi All,
My current system settings allow the creation of a credit memo request with reference to a cancelled billing document.
I can restrict this by making changes in the header copying requirement (021- Billing Header) for CR--> F2 . (Trsansaction VTAF)
However, I would like to know that whether the standard system should allow or should not allow the same?
Please be sure of the points on getting correct answers....
Regards,
Nike

Hi..
Please kindly to the necessary testing after doing the changes to copycontrol..
If you donot face any issue then go ahead with the changes you have done else keep the setting
as before......
Regards
MBS

Creation of sales document (DMR, CMR) from the archived billing document

Hi all
I read somewhere that one of the functionality in EHP3 is we can create sales document like debit memo request and credit memo request from the archived billing document. I am working on EHP3 system only but i am not able to create the sales document. the system throws an error that billing document doesnt exist
If any one of you have worked on such functionality kindly suggest me why its not happening here also let me know Is ther any customization required for the execution of this functionality in spro.

hi,
the help says:
You can use this business function to further optimize your electronic Sales and Billing Processes.
Electronic data archiving regulations result in a high volume of data for sales documents and require invoices to be archived at an early stage. You can integrate archived billing documents in your business processes more easily. Since you still have electronic access to archived invoices during the sales process, you can manage archiving without delay and execute further sales processes electronically.
You can more efficiently use the rebate agreements from SAP ERP for your marketing activities. In particular, customers who use SAP CRM (Trade Promotion Management) with a large volume of data for campaigns, target groups, and product segments can define a custom-made logic for their rebate determination and thus avoid potential database problems.
Integration
To implement the logic for rebate processing in SAP ERP, you use the Enhancements for Rebate Processing Business Add-In (BAdI). For more information, see the Implementation Guide (IMG) under Sales and Distribution Billing Rebate Processing Business Add-Ins (BAdIs) Enhancements for Rebate Processing .
Prerequisites
You have activated the Logistics: S&D Simplification (SD_01) business function.
Features
You can integrate archived billing documents in your business processes as follows:
Create sales documents with reference to archived billing documents, such as credit memo and debit memo requests.
Display archived billing documents.
When you do either of these steps, the system first looks for the invoice in the database and then in the archive.
For the sales employee, the processing steps are identical, regardless of where the sales document is stored. As soon as the sales employee processes an archived billing document, they see the relevant information in the message line as well as in the title of the function.
For rebate processing, you can store your company's check logic in the interface of the Business Add-In (BAdI) Enhancements for Rebate Processing.
So check if you have activated the business function.
I hope this helps.
Balazs

Enhance the Cancel billing document (VF11)

Similar Messages

Maybe you are looking for