Enhanced 0MATERIAL_ATTR-Extractor: Data in R/3-RSA3 but not in BW-PSA

Hi,
we enhanced our 0MATERIAL_ATTR- DataSource with a "new" Z-field.
I checkt the DataSource with RSA3 and everything seemed to be fine (right data in Z-Field).
I loaded one record to BW and this new Z-Field is empty (I expected data!).
I allready:
- activated everything on BW
- deleted Source System Assignment and assigned it new
- Replicated the Data Source (twice)
- checked Transfer Rules
- checked the assignment of the z-field (Type is Ok, it is assigned)
- searced with google and in this forum.
Monitor shows green light on DataLoading (no errors)
ST22 shows no shortdump (BW and R/3)
System BW 3.5
Why can i see data on RSA3 and BW can´t load values for this new Z-Field?
Thanks in advance!
Greetings
Daniel
Btw: Yes, i assign points!

Hi,
Full Load: It was a full load for about 100 Materials. I cant start a full load without restriction, there are to many data...
To delete all MD: This is not possible!
BW 3.5.
I'll try to delete DS and rereplicate ist. ...
thanks.

Similar Messages

0fi_ar_4 netduedate(netdt) value coming in RSA3 but not coming in BI PSA

Hi all,
i am using 0fi_ar_4,
netduedate(netdt) value coming in RSA3 but not coming in BI PSA, in BI PSA there is 10-12 do cument there where netduedate is null while for same document we are getting the netduedate running from transaction RSA3, how?
Thanks.

Hi,
I found the problem, i have write a user exit in data sourc e in ecc, i am getting value in rsa3 but not getting in BI PSA becaue ise there is 20000 KB limits for per info package load request i.e. idoc size, as its fixed, i did change little in my user exit at ECC.
thaks

Column has values in RSA3 but comes blank in PSA

Hi All,
I have added some code for datasource 0REFX_4 and extracting data into an ODS. My issue is that the column 0RECONTRACT has values in RSA3 but comes blank in PSA/ODS.
Another funny thing is that when I do selection with company code in infopackage and extract, the column 0RECONTRACT gets filled!! It doesn't get filled only when i extarct without selection. Can any of you help me resolve this?
-Narayan

Narayan, so strange ! If I undertand, In RSA3 with or without selection, the column 0RECONTRACT gets filled. The problem is from BW (Infopackage). You can make a test:
In you code to select the value to 0RECONTRACT (I don´t know the R/3 field), you put a "loop", in the start of exit function. Start Infopackage and goes to R/3 via SM50 transaction em DEBUG exit.
Loop like this:
v_stop = 1.
while v_stop = 1.
v_stop = 1.
endwhile.
Look the values from table C_T_DATA. Maybe the field that you use to select 0RECONTRACT is blank, when you start the load from BW. I´ve tried to find some SAP Notes, but nothing.
Hugs,
Marcelo

Adobe form-Able to post data using Adobe Reader 9 but not with Adobe Proff

Hello Guru's
I am facing one problem with adobe forms.
We have develoed a adobe form using adobe reader 9.
Now when user are posting the purchase requistion using the form,they are able to post the data using
Adobe Reader 9 but not with Adobe Reader professional.
Can anyone please advice me what can be the problem here.

Adobe Reader 9 can't save the old FDA forms. FDA must update their forms.

Data appears in the tree but not in the display

Post Author: TheBig1980s
CA Forum: General
Hello:
When I print data for one month, data appears in both the Preview tree and the Preview display. When I print the data for another month, the data does show in the Preview tree but not in the Preview display.
Forgetting the tables the report is pulling from, forgetting which month is which, etc., why (in any case) would Crystal show data in the Preview tree but not show that same data in the Preview display? That makes no sense. I wish I could just take my mouse and just drag the tree onto the displayu2026..
I have nothing suppressed. This is Crystal 9.
Thanks!
TheBig1980s

Post Author: SKodidine
CA Forum: General
I encounter this in CR XI once in a while. What I found from my research, if I have a group and then I have certain conditions to either display or eliminate the data selected for whatever reason then the group tree will show the group and since the data is eliminated by either the select criteria or another way there is no data displayed.
Try this. In the second month where you see the data in the tree but on the report, see if you can narrow it down further by day and see if you can find the reason why.

When I look up the creation date for files on my Macbook I get the date and month in brackets, but not the year. Why is this and how can I look up the year?

When I look up the creation date for files on my Macbook (using "get info", or the information window in Iphoto) I get the date and month in brackets, but not the year. Why is this and how can I look up the year?

Does the Date Modified column in a window set to List view show the date correctly, or does it also display it incorrectly?
To add additional columns to a Finder (folder) window, with that window open and active open the View Options for it. You can do that by pressing Command-J or by selecting View Options from the View menu in the main menubar.

Data loaded successfully in RSA3, but can not find data in BW PSA

Dear all:
We have custom datasource enhanced through BADI. For one column, in the source system RSA3, I can see this field populated with data, but in BW, when I load the data in PSA and check, this field is blank...
I tried seeral ways like re-replicate datasource, delete the datasource in BW and re-replicate, but not work.
Did anybody meet the same situation before? How to handle this issue?
Any post would be appreciated and thank you all in advance!
Tim

Hi Pavan:
Thanks for your reply.
I don't have any selection field for this datasource, and the number between ECC and BW matches. Actually the problem is only for one field, on ECC side RSA3, this field are populated with values, while in BW PSA, this column is there, but all the content are blank.
I do call one function module called to populate that field:
CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
      EXPORTING
      CLASS                      = ''
        CLASSTEXT                  = 'X'
        CLASSTYPE                  = '023'
      CLINT                      = 0
        FEATURES                   = 'X'
        LANGUAGE                   = SY-LANGU
        OBJECT                     = W_OBJECT
        OBJECTTABLE                = 'MCH1'
        KEY_DATE                   = SY-DATUM
        INITIAL_CHARACT            = 'X'
      NO_VALUE_DESCRIPT          =
        CHANGE_SERVICE_CLF         = 'X'
      INHERITED_CHAR             = ' '
      CHANGE_NUMBER              = ' '
      TABLES
        T_CLASS                    = ITAB_CLASS
        T_OBJECTDATA               = ITAB_OBJECTDATA
      I_SEL_CHARACTERISTIC       =
      T_NO_AUTH_CHARACT          =
      EXCEPTIONS
        NO_CLASSIFICATION          = 1
        NO_CLASSTYPES              = 2
        INVALID_CLASS_TYPE         = 3
        OTHERS                     = 4
    IF ITAB_OBJECTDATA IS NOT INITIAL.
       READ TABLE ITAB_OBJECTDATA INTO wa_OBJECTDATA WITH KEY atnam = 'ZLOBM_PLNTMFG'.
       <LS_ESMI_BW_MD_ZBATC0001>-ZORIGPLNT = wa_OBJECTDATA-AUSP1.
    ENDIF.
The code is very simple, it just call the standard FM and fetch the value from the return table, is there any thing wrong with my code?
Thanks!
Tim

Field data from RSA3 is not showing in PSA

Hi guys
I can see the data field (custom) data populated in RSA3 for one of our data source...but which is not showing up in PSA table . we recently reinited and for some reason that particular field is not bringing the data .For all the records this paritcular field in PSa showing as 00.00.0000 . How come a field value shows in RSA3 and not PSA ???? please advie what should I do
regards

Hi sam thanks...I can see that data in extractor but not in PSA , that means it should not be in tra str /update rules/. the problem must be in extractor ...please help how to get this date in PSA as is...
I have one more issue, when Iam loading the data from PSA to cube the data was half loaded and then the remaining half has yellow status in monitor...when I checked in simulation mode the following message is coming " Enter rate USD / rate type M for 30.03.2007 in the system settings" do you have any idea on how to fix this ?
thanks
Edited by: sam on Jan 25, 2008 9:17 PM

Use cellular data for iTunes Match & Radio but not app Updates

Is there any way to set an iOS device so that it will allow using cellular data for iTunes Match and iTunes Radio but not downloading app Updates. I want to be able to set my wife's phone so that the apps are automatically updated over Wifi but she can then use iTunes Match and iTunes Radio when she is out. She only uses those in limited capacity so I am not too worried about her using up her data plan with those. However, app Downloads seems to be quite large, and they happened a lot recently when they all updated for iOS8.
Thanks,
Tony

No, but you could turn off Updates under Automatic Downloads in Settings>iTunes & App Store, then update them manually when you're connected to wifi.

Dates Appearing in Tabular Model but not appearing on Pivot table

Hi all,
I am using SSAS tabular Model 2012, in tabular model all dates are appearing correct in date column but not when i drag attribute to my pivot table it shows only one date. Does anyone has the solution of this issue.
Regards,
Piyush

Hi Piyush0308,
According to your description, you have date column displayed all dates correctly in Tabualr. When showing in a Excel Pivot table, it only get the first date. Right?
In this scenario, firstly please check the source table data in database, then make sure the data type of this column is Date in Tabualr. In Excel, please make sure there's no aggregation setting on this field. As I tested in our local environment, it should
display same thing in tabular.
If the issue still persists, please share some information about your date table so that we have some deep analysis.
Best Regards,
Simon Hou
TechNet Community Support

Data Visible At Aggregated Level but not at Leaf Node Level in ASO

Hi,
I am facing an issue in Essbase Version 7. I have a BSO - ASO partition. I have 4 dimensions Customer, Accounts, Product and Time. When i try to view data across customer, time and accounts the data is visible at the leaf node level and the aggregated level. But when i include Customer in my analysis the data is visible at an aggregated level for the customer but not a the leaf node level. What could be the cause of this? I am not getting any errors during my data load in ASO as well as when i run the aggregation in ASO...
Any inputs on this issue are highly appreciated....

Without having complete information, I'll guess you are trying to look at the data in the BSO cube. I would look at the partition definition. One of two things is most likely happening
1. You only have the partition defined to look at the top level of customers
2. THe member names of lower levels of customers is not consistent betweent he two cubes and you don't map member names.
You can prove that is it a partition definition problem by doing the same retrieves from your ASO cube. If you get back data you know it is a partition definition problem. If you don't get back the proper data you have different problems. One that would not seem logical unless you had odd formulas on your ASO cube.

Data is in the repository, but not showing on the EPM workspace

Hi All,
Recently we have migrated from Hyperion8.5 to Hyperion11.1.1. Migration went on well no errors, after migration I see some folders missing and when I queried on the repositories all the folder data and reports are there in the repository but not showing up in the EPM workspace. It is weird. Did any one encountered this type of error. Is there any work around to this.
Any help will be greatly appreciated
Thanks

Check BI+ security in shared services. Set someone to BI+ Administrator and have them look in Workspace for the reports. In Workspace, check the Permissions of each folder.

0CO_OM_OPA_6: Custom fields added, Data - available in RSA3, but not in PSA

Hi Friends,
I have added some custom fields to the 0CO_OM_OPA_6 data source. Following are the details.
1) Custom fields: ZZEBELN (Purchasing Doc), ZZUSNAM (Username)
2) Code populated in SE19 (BADI for this Datasource)
3) RSA3: Test extraction pulls the records for both the custom fields correctly.
4) RSA5, and RSA6 - Fields are unchecked for hidden and field only. They are made available.
5) Extract Structure replicated into BW and its pulled over from extract structure into Transfer structure.
6) Mapped to corresponding fields in BW update rule and transfer rules. (No routines or formulas exist)/
7) When load extracted into BW, data is blank for both the fields in PSA itself.
Our BW is 7.3 but we still use this datasource as 3.x transfer rules and datasource. In BW, it is connected to the Cube 0OPA_C11 via update rules and 3.x transfer rules only.
Is there any reason for the data being populated into the RSA3, where as not into PSA. Please consider the above points, and let me know if I have done or missing anything here in my steps. I have gone thru several forums and havent got any specific replies for such issues. Have you come across such issues, please share your thoughts and views.
Any of your replies will definitely help. Really appreciate your inputs.
Thanks!!
Prasith

Hi Prasith ,
After reading all the answers , what i feel we are missing a major step ie Re-initialization of the cube .
As you changed the extract structure and added new fields and for this Data source i assume that deltas were running already , the BW system cannot pull these new fields directly from ECC unless you have not done a re-INit again .
The Re-init is pretty simple and not as complex as LO.
I would advise you to re-init for 01.2014 till 016.9999 , run full load and then delatas will flow in later on . Check during the full load if you are able to see these fields in BW in (PSA/ Cube) .
But be careful you need to do Re-init only on week ends when there are no transactions happening else you might end up in duplicate data .
Hope this helps !
Let me know how it goes .
Regards
Zeenath

Memory overflow in RSA3 but not in FM on which datasource created

Hi
I am getting the short dump in the generic datasource extraction ( To extract CDPOS and CDHDR data) which is based on a FM. when i directly execute the FM its not giving any dump and giving me correct data, but when execute through RSA3, it gives following error. Please help me how can i correct this ?
STORAGE_PARAMETERS_WRONG_SET and TSV_TNEW_PAGE_ALLOC_FAILED errors
Below is the code, highlited is the code which is giving problem.
Declaration
      OPEN CURSOR WITH HOLD S_CURSOR FOR
      SELECT MANDANT OBJECTCLAS OBJECTID CHANGENR USERNAME UDATE FROM CDHDR
             WHERE OBJECTCLAS EQ 'EINKBELEG'
               AND OBJECTID IN L_R_OBJECTID
               AND UDATE    IN L_R_UDATE.
    FETCH NEXT CURSOR S_CURSOR
           APPENDING CORRESPONDING FIELDS
           OF TABLE IT_CDHDR
           PACKAGE SIZE S_S_IF-MAXSIZE.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR S_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.
**************HERE IS SYSTEM GIVING DUMP
   SELECT * FROM CDPOS INTO TABLE IT_CDPOS
FOR ALL ENTRIES IN IT_CDHDR
WHERE OBJECTCLAS EQ IT_CDHDR-OBJECTCLAS
    AND OBJECTID EQ IT_CDHDR-OBJECTID
    AND CHANGENR EQ IT_CDHDR-CHANGENR
    AND TABNAME EQ 'EKKO'
    AND FNAME   EQ 'FRGZU'.
**************HERE IS SYSTEM GIVING DUMP
Further Processing
LOOP AT IT_CDPOS INTO WA_CDPOS.
    READ TABLE IT_CDHDR INTO WA_CDHDR
     WITH KEY OBJECTCLAS = WA_CDPOS-OBJECTCLAS
              CHANGENR = WA_CDPOS-CHANGENR
              OBJECTID = WA_CDPOS-OBJECTID.
    WA_DATAPACKAGE-MANDANT = WA_CDPOS-MANDANT.
    WA_DATAPACKAGE-OBJECTCLAS = WA_CDPOS-OBJECTCLAS.
    WA_DATAPACKAGE-OBJECTID = WA_CDPOS-OBJECTID.
    WA_DATAPACKAGE-CHANGENR = WA_CDPOS-CHANGENR.
    WA_DATAPACKAGE-VALUE_NEW = WA_CDPOS-VALUE_NEW.
    WA_DATAPACKAGE-VALUE_OLD = WA_CDPOS-VALUE_OLD.
    WA_DATAPACKAGE-USERNAME = WA_CDHDR-USERNAME.
    WA_DATAPACKAGE-UDATE    = WA_CDHDR-UDATE.
    APPEND WA_DATAPACKAGE TO E_T_DATA.
    CLEAR: WA_DATAPACKAGE,WA_CDHDR,WA_CDPOS.
ENDLOOP.
ENDFUNCTION.
Edited by: Tripple k on Oct 21, 2010 6:07 PM

Hi Rahul
I restricted to 1 data call and 1 record per call in RSA3, still i am getting the same problem.
Regards
Kamal
> Hi,
>
> When your execute through RSA3, there is a limit to the number of records that can be held in the memory while extraction. So it may go for these dumps. You may restrict the number of records by changing Data Records / Calls & Display Extr. Calls while running RSA3.

Works in RSA3 but not when pulling from BI

Hi,
I created a generic dataSource(Function Module) for Bill Of Material. When testing in RSA3 it is working fine. But when pulling data from BI with particular material in the Data Selection, it is saying "No data available". If I am pulling the same with no data selection then it is giving an error message "Job terminated in source system --> Request set to red".
When checked in SM37 I see the following error messages.
No active nametab exists for /SAPAPO/MATKEY DA 300
Job cancelled after system exception ERROR_MESSAGE
Can any body help me on this
Thanks for your help
Subra

Every thing is fine in all these transactions SM58, BD87, & WE05. There is no problem with the connections at all. I replicated many times and the error is always the same.
The error message below is the reason.
No active nametab exists for /SAPAPO/MATKEY
This messsage is not coming when testing in RSA3. Only when pulling the data from BI, this error is happening.
We are not using SAPAPO but still this message is coming up.
thanks
Subra

Enhanced 0MATERIAL_ATTR-Extractor: Data in R/3-RSA3 but not in BW-PSA

Similar Messages

Maybe you are looking for