Enhanced Data Type not visible in SPROXY

Hello experts,
I've enhanced my personal data type with some extra fields...
I activated this and the change can be seen in the Message Type and the Service Interface.
Next, I go to my ECC6.0 backend system and take transaction SPROXY. There I need to regenerate my proxy.
After I did that, I expected to see my added fields in my input structure as an append structure, but that's not the case.
What's wrong? Please advice.
Thanks a lot!
Dimitri

Hi Dimitri,
There should not any problem while generating proxyies again please chek two things in your case
1.Wether the Activation is done prperly or not.
2. Conncetions from ESR to PI are proper ot not ( rfc connection LCRSAPRFC between PI and R/3).
Please chek the fillowing link which has the information about the issue in visibiility of content in ESR and the necessary configuration steps to be followed to enable the updated PI content in ESR as response to Question 2. in the responses.
Thread:
Re: Simple questions about proxy
Configutaion guide for checking Proxy connections
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Thanks,
Ram.

Similar Messages

Date Types not visible in CRM Service Request

Dear Friends,
I am implementing Service Requests in CRM 7.0 in our project
I have configured the Date Types and assigned them to the Date profile
The Date profile i have assigned it to the Transaction Type
But when creating the new Service Request Transaction Type the dates are not appearing
Can you help me by directing me to any missing config
Regards,
Raj

Hi,
check if you have set the screen assignments in the date profile. When you assign the date type, in the left navigation area, one level below, you have to set the visibility of the date type.
Regards, Toine

Not able to see Enhanced Data type in SPROXY in SRM

Hello Experts,
We are planning to use an outbound (SRM to PI) Proxy between SRM and PI to send XML messages. Our SRM team has requested a Datatype enhancement of SAP's predelivered SCV, SAP SRM SERVER 7.0 component i.e. RFQRequest. So, In ESR we have created a new Enhanced data type based on RFQMessage (SAP's pre delivered datatype). I've added their (SRM team's) 6 extra elements to this new Enhanced Data Type, RFQMessageExtension. And, saved and activated it.
Now, to generate the Proxy I went into SRM -> SPROXY, but I donu2019t see my Enhanced Datatype, RFQMessageExtension. Please let me if you've come across this problem or know the solution. I was following this blog [/people/michal.krawczyk2/blog/2006/11/14/xipi-data-type-enhancements-standard-business-partner|/people/michal.krawczyk2/blog/2006/11/14/xipi-data-type-enhancements-standard-business-partner]
Thanks,
Mayur

Hi Mayur,
Have you read this article?
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0bb5687-00b2-2a10-ed8f-c9af69942e5d
Regards,
Ravi kanth talagana

ERROR OGG-01148 programming error, data type not supported for column

I am getting following error when I put null in insert statement
2011-03-31 18:30:45 ERROR OGG-01148 programming error, data type not supported for column TXID in table advoss.tblaudittrail.
I am replicating MySQL 5.5.9 to Oracle 11g rel2 via goldengate 11

I am able to diagnose what is cuasing the problem
unsigned flag was the culprit of this error
I am able to insert null after removing unsigned flag.
thank you very much for your kind support

Data Type Enhancement not visible in SPROXY

Hi All,
We are implementing SRM 7.0 with PI 7.1.
We have a reuiquirement of adding custom fields in the standard message DespatchedDeliveryNotification_Out which is sent from SRM SUS. I have created the data type enhancement in the ESR in the namespace http://sap.com/xi/SRM/SupplierEnablement/Global
for the data type DespatchedDeliveryNotification. But the Data Type Enhancement is not visible in transaction SPROXY in the SRM server.
Is this the way to do it? Or there is some different method to be followed?
Please advise.
Regards,
Karen Pereira

Is this thread still valid? If not, please close the thread.
If so, as no response has been submitted, please rephrase your question and/or provide further information to describe your requirement.
Thanks
Jason
SDN SRM Moderator Team

Currency Conversion type not visible in the query

Hi ,
I created one currency type conversion   Z_INR
exchange rate type : M
Exchange rate from infoobject : zexch_rate(key fig)
source curr from data record
Fixed target curr : INR
Variable time reference : A to Exact Day
Special info object : Ztr_date (Transaction date)
it got saved succesfully but wen i try to include this in the query its not visible there . can anyone let me know why this problem is coming
help will be appreciated .
i also included rate and date in the query still not visible

Hi,
Create Currency conversion type using Trans: RRC1.
1.Specify your Exchange rate type.
2.Dynamic Exchange rate type
3.Source curency from data rec.
4.Fixed currency say USD.
5.Select Variable Time reference "Start Month" and Special Info Object - 0calmonth
Secondly In the key figure field to be converted in the query,   select properties - select the currency conversion key name .
Thanks,
Nagesh
Sony Singapore

JDBC adapter type not visible in Communication Channel

Hi All,
I have deployed JDBC driver according to http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00b4a020-4ae6-2c10-5a95-fed4ad9a4b60?QuickLink=index&… .
Driver deployed successfully and I have checked it in folder \usr\sap\xxx\DVEBMGS30\j2ee\cluster\bin\ext\com.sap.aii.adapter.lib\lib and it's found ok. But this adapter type not showing in Communication Channel only RFC and SOAP are showing there. I have restarted the server also. Can any one tell me where the problem is?

Hi Kuldeep,
Have you check the patch level of both java & abap has same ,if some thing different in Patch level of any of this it will not visible in communication channel
Check below links also
https://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
Sender JDBC adapter : data read from db but not in PI
Regards
K.N

Request Type not Visible in CUP

Hi,
We are in the process of configuring CUP.
We have uploaded file AE_init_append_data _CC.xml into the initial system data of CUP. But Request types MITICRLC etc are not visible in CUP.
Workflows for RAR are visible in CUP-> CONFIGURATION->MISCELLANEOUS
Any clues.
Regards,

Please check if you have activated the RAR workflows in CUP-> CONFIGURATION->MISCELLANEOUS along with proper exit URIs and User ID password details.
Once these workflows are activated only then you will be able to see the corresponding details under request type, priorities etc for RAR workflows.

Data points not visible on xy chart

I am trying create an xy chart (a scatter plot) in staroffice (.sxc) using two sets of data:
Data 1:
-0.15
-0.1
0.04
0
-0.1
0.18
-0.05
0.08
0
Data 2:
5
50
80
70
80
80
50
90
80
After having selected my data, axis specifications, etc, when I click "create" , the chart is created, but no data points are visible. I have created another chart with different data where the data points are visible
I have not modified the axes scale.
The data points will display on any other type of chart except the scatter plot, which is the one I need. Has anybody experienced this problem/know how to deal with it?

Where, for example, the first point is (-0.15, 5) where -0.15 in Data 1 is equivalent to 5 in Data 2

Enhanced field was not visible in DataSource

Hi ,
I Enhanced one field to DataSource, But it is not visible in that datasource.
T
he procedure which i followed is:
RSA6 -> Select DataSource -> Click on "Enhance Exctract Structure" -> It will show Append Structure -> Continue -> Add filed -> Activate + Back
When i checked again the same datasource it is not showing the appended field.
Can any one suggest me, wht can i do now to see that Added filed to DataSource.
Thanks and Regards
Rajesh

Hi Rajesh,
go to LBWE Lo cockpit there u find the Datasource click on the link there u find the appended field is marked as Hide and Field only Check boxes u can un mark the Hide check box and activate the data source u find the appended field.
i hope this will help u
Thanks & Regards,
Ramesh

BIP 11.1.1.7 - Stacked Bar chart data label not visible in pdf

Hi all,
I have a report built with the online editor. This contains a stacked bar chart with percentage values in a repeating section and I made the property DataVisible=true.
When I view the report in interactive mode it all works: I can see the data label for every value of the parameter but when I view in any other format (PDF, PPT, ecc..) the data labels are visible in the first chart (for the first value of the parameter) while in the other charts they aren't. This doesn't happens for other types of chart, for example with a pie chart.
Can someone help me or tell if it is a bug?
Thanks,
Micaela

Hi Mitalee,
Would you please check the PAM at https://websmp108.sap-ag.de/~sapidb/012002523100018972812014E
On page 11 it says 64 bit IE11 is not supported; is your IE11 32 bit or 64 bit?

Message Type not visible in BD10

Hi,
One of the message types is not visible in BD10. Will this appear if I add it using BD60 transaction. But my doubt is that all the message types visible in BD60 are again not there in the F4 help. Is there some othere place where the message type has to be maintained.
Regards,
Deepti

hi
If you add required message type in BD60 you can see it. but the thing is BD10 is only for MATERIALS. So material related message types only you can see there. It you want to see customer related message type then you can go to BD12.
While creating message type in BD60, system should ask reference message type. You have to select one reference message type while selecting dropdown or pressing f4 for reference field in BD60. If you select MATMAS as reference message type there then you can see that message in BD10.
Reward if it is helpful.
Thanks
Siva Kumar

Eclipse - imported type not visible !?

I have an import at the beginning of my code but it is underlined and when you hover over it it says imported type ... is not visible. Why? I have added the jar and all other imports work fine. What could be wrong?

Another thing to look for is to make sure that the class you are looking for is in the Jar file, and not a different one. Like how the JavaMail api has multiple jar files.
Something you could try is to remove the import, but keep the part of the code where you use the classes from that import, and save the file. When you get an error, right click on the error and select "Quick Fix", and see if it offers the class as an option to add.

Enhancement section does not visible at runtime

I created enhancement section in SAP standard program, activated it but it does not visible at runtime. How do I make it available? Thanks!

Hi Anthony,
Have you implemented Implicit Enhancement?
Once code is activated without error there is no other step required.
Refer [Enhancement|https://wiki.sdn.sap.com/wiki/display/ABAP/ThenewEnhancementFrameworkandthenewkernel-basedBAdI] for more information.
Regards
Shital

VISA data types not compatible with ODBC SQL_C_ datatypes

This is strange: I have a CVI app which reads data from Access 2.0 into VISA
datatype structures throught ODBC 3.51 and so far it worked properly but
when I upgrated the ODBC drivers to 4.0 (the application remins the same
exe) then all cases where I use ViInt16 recieves zeros instead the correct
data.

Hi vaibhav
Thanks for help. Actually my requirement is that I have one database on sql server 2005 version. I am planning to migrate it to sql server 2012 version. I want to publish a list of all objects across all databases which cannot be replicated to sql server
2012.How can I do this. Are there any data types which were in sql 2005 version but are depreciated in sql server 2012
Regards
Rahul
yes there are
but why not look at here for breaking changes
http://msdn.microsoft.com/en-us/library/ms143179(v=sql.110).aspx
The deprecated features would still work though new development using them is discouraged
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Enhanced Data Type not visible in SPROXY

Similar Messages

Maybe you are looking for