Enhanced datasource field not replicated

Hi All,
I enhanced 0employe_attr datasource with one custom field. I appened the structure and I wrote user exit and activated . But when i replicate to BW the new field is not replicated.
I unchecked the hide field in the datasource and made it to selection and generated it.
When I run RSA 3 i can see record populating for the field. But the enhanced field is not replicating. to BW.
Regards
Vasister

Hi Jeny,
Sorry I could update , Currently i am working on 3.1 version, I replicated the datasource and I forgot to move the field from datasource to transfer structure in the inforsource maintance. Bcoz of that I could find the enhanced field in the transfer structure of infosource.
Anyways please uncheck the hide field or field only in the RSA6 after your enhancement and generate the datsource. and then replicate .
Regards
A:Vasister

Similar Messages

Enhanced Datasource fields not getting displayed in Transformation

Hi,
Eventhough after replicating the datasource, the Enhanced Datasource fields not getting displayed in Transformation.
Eg I have done mapping of 6 fields in transformation from datasource to DSO
Now the datasource is enhanced with 8 fields...........The transformation is not showing the added 2 fields
I am deleting the existing transformation.Is this the only solution?
Kindly suggest your answers.
Thanks,
Sonu.

HI,
Deleting is not solution as it is common scnerio.
Go to the data source in BW and in change mode check the option "transfer" for this two fields and then see if its coming or not.
Thanks
Ajeet

0HR_PY_1 Datasource: Fields not filled

Hello to everyone!
I'm afraid that I need some help from you. We are extracting HR data via 0HR_PY_1 Datasource and I have noticed that some fields are not filled by the extraction program. I've read BW Online Help about this datasource and I have realized that the extraction program doesn´t fill these fields.
Do you know how can I do to make these fields to be filled?
The fields are:
- KOKRS_CO
Controlling area
Not filled
- CO_AREA_WP
Controlling area of master cost center
Not filled
-LSTAR_CO
Debited activity type
Not filled
VORNR_CO
Debited transaction
Not filled
GSBER_CO
Debited business area
Not filled
KOSTL_CO
Debited cost center
Not filled
BUKRS_CO
Debited company code
Not filled
NPLNR_CO
Debited network
Not filled
AUFNR_CO
Debited order
Not filled
PS_POSID_CO
Debited WBS element
Not filled
Thanks in advance!
Best regards,
Mª Victoria Durá

Thank you very much for your help but, I'm afraid that the procedure that you explained is for enhancing the datasource but my problem is that the fields already exist but they are not filled by extraction programmes. I don't understand why does SAP make this and I was wondering if there are any way to make these fields to be filled using the standard procedure. I mean, if these fields are not filled (and SAP tells you so in BW Online Help), why these fields are included in the extract structure and in the datasource?. I tend to think that there are any procedure to follow in order to fill these fields. What do you think about it?. In adition, the not-filled-fields are CO objects so it doesn´t appear to me to be very easy the filling of them.
I don't know if anybody has been in the same situation or if is there any documentation about it that can help. Thank you for your help!
Mariví

Additional fields in infoset query can not be used as datasource fields

I create one infoset query with additional fields (using ABAP code) in R/3. When I create datasource RSO2 using this infoset query, system only show all fields without additional fields that I enhanced in infoset query. Does that mean we can not get additional fields information in generic datasource creation that we enhanced in infoset query?

dear Awa,
you are enhanced some fields in r/3.right that fields are shown in
rsa6 select your data source click on display your datasource then select
extract structure its shows how many fields are haveing particular
datasource .or otherwise goto rso2 select your data source display
double click on your extractstructure its show how many fields haveing
the particular datasource. check the Rsa6 what ever fields you newly added that field default hide mode
you remove the hide tickmark.

Datasource not replicated in Production Environment

Hi all,
I activate a datasource 2lis_04_p_comp in SAP R/3 development environment and replicate it in BW development environment. All works are OK.
Then I transport this datasource in R/3 production environment a first time, then a second time after several modifications on my datasource. All transports and activation (first and second wave of transport on this datasource) are OK between development and production environment (on R/3).
2LIS_04_P_COMP is same (on R/3) between development and production environment.
But when I want replicate 2LIS_04_P_COMP in BW production environment, several fields are not replicated. Only fields wich are transported in first wave are replicated in BW production environment. Fields which are added (after datasource modifications) and transported in second wave of datasource transports, are not replicated (Datasource contains these fields on R/3 development and production environment). Whereas in development environment all fields are correctly replicated.
I think, my problem stems from replication in BW production environment.
How can I replicated all fields in my BW production environment ?
Thanks,
Rgds,
Sébastien

hi,
Can u check the transport log for 2nd time transport from R/3 Dev to R/3 Prod...
Did u see all the changes in R/3 prod for DS 2LIS_04_P_COMP ..
try this again..
R/3 prod
RSA6--> Select 2LIS_04_P_COMP Click on Truck icon -->
BW Prod
RSA1--> Source Sys tab > Select ur SS> RightClk and Replicate Datasources
If u still missing some fields .. come back to us
Thanks

DataSource Enhancements : Maximum Fields

Dear Friend,
How many fields we can add to DataSource to Enhance ( Maximum Fields), I heard if it is more then 20 fields it is not good, but please let me know the correct one.
I found some Master Data TEXT/Description fields also enhanced in 2LIS_13_VDITM, if any Special Chars will come in the Data loads, then there may be huge problem, is it right?. please help me.
Thanks
Ganga

Hi Ganga,
As far as my Knowledge goes , from a DDIC prespespective you can add as many fields as possible to the extract structure. The only limitation would be that imposed by the underlying Database.
Even if you add 20 extra fields I do'nt think there should not be any problem if you get all these values using one select statement. But if more than one select statement is used , performance would surely go down.
What I mean is that if out of the 20 fields , if 10 are to be read from table 1 and 3 are to be read from table 2 and remaning are to be read from table 3. then this would require two inner joins(if there exists a common key field) otherwise it would require three different select statements. In either case the performanc would come down.
Hope this answers your first question.
I am really sorry I did not get the second question . what exactly do you mean by "if any Special Chars will come in the Data loads, then there may be huge problem, is it right?" .. please be clear on this.
Regards,
James Harold.

New G/L Line item Datasource 0FI_GL_14 not extracting exchange rate field

Hi,
We are implementing new G/L Line item datasource and standarad field of this datasource KURSE - exchange rate field not extracting data.
Debugged standard extractor function module but field for exchange rate is not populating even there is a value in the base table BKPF.
Please advise on this.
Thanks
UDAY
Edited by: Udaybi on Apr 12, 2011 5:30 AM

Did you solve the issue? I am facing the same issue too.

BW Enhancement - Connection Field

Hi
I want to enhance following fields in Data Source: 2LIS_13_VDITM / 2LIS_12_VCITM / 2LIS_11_VAITM.
a) Billing date FPLT- AFDAT
b) Billing Value FPLT- FAKWR
I am not able to find the connecting field in between the table : FPLT and above mentioned data sources. But this is a client requirement. Please advice me the solution.
Thanks & Best Regards,
Venkat.

I am seeing FAKSP Billing Block in the datasource and I think with this you can connect the FPLT Table which is Billing Planning Table.
Regs
Gopi.
Assign points if it is helpful.

Selection field not coming at Infopackage level

Hi All,
I am facing a strange problem.There is one field which is marked for selection at the datasource level.In the R/3 side we are getting that field as selection if we go for t-code RSA3.
But in the BW system when we create an Info-package we do not get the same field under Data selection tab.We have tried to change the data type of that field and replicated the datasource but still it didnt worked.
Please suggest on this issue as it a very high priority issue for us.
Thanks in advance.
Regards,
Kshitij

Hi Naveen,
1) This is not a standard datasource.
2) In RSA2 that field is marked for selection and it is showing for selection if we go for RSA3.
3) Could you please elobrate more on what do you mean by 'attribute column'.???
In R/3 system we have the same field for selection ( this field is related to 'no of days'=zdays[info object name]) but at Info package level in BW system it does not appear for selection.
If you have time can we call you.Please pass on your number to me.
Regards,
Kshitij

Customized fields Not visible in GUI but visible in PCUI why

Hi,
Can anybody help me, i have a problem which is as followes,
I Enhanced Three fields for Campign in CRM Throw EEWB, these three fields are not appearing in GUI but its appearing in PCUI.
Can some body can give me valueble inputs to solve this issue.
Thanks & Regards,
Sivakumar.

Hi Suyash
In the TS, on the right side, see if these fields are part of the DS.
If yes, then click on them and drop them on the left, in the Transfer structure.
If they are not availabel in the Datasource, then go to RSA6 in R/3 and see if the extract structure of this DS has these fields hidden, i.e if theres a check mark on hide coloumn....
If these fields are not visible in the extract structure then let me know
Regards
Prakash
Assigning points on SDN is a way of saying thanks !!

Datasource is not activatng

Hi SAP Gurus,
I am tying to activate replicated datasouce in BI,in order to create Infoackage.But I am getting an error mesaage and datasource is not activated.
Error message:Error getting fields for PSA "BIC B0000096
Datasouce name is Vendor evaluaton
Please help me in this.
Regards
Meenu

hopefully these helps
Try activating the datasource using the program in SE38: RSDS_DATASOURCE_ACTIVATE_ALL
give the data source name and source system name.
Check the following threads:
<a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1462409"></a>
<a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1179116"></a>
<a class="jive_macro jive_macro_message" href="" __jive_macro_name="message" modifiedtitle="true" __default_attr="8547071"></a>
<a class="jive_macro jive_macro_message" href="" __jive_macro_name="message" modifiedtitle="true" __default_attr="8106986"></a>

Enhanced DataSources after transport

Hi,
I added two fields to datasource 2LIS_03_BF, i successfully transported the changes to the new server. I checked in RSA6 if the added fields were imported and they were.
However when i replicated the datasource into BI, the added fields are missing.
How can i make sure that those added fields are replicated into BI?
Thanks

Those fields didn't physically moved only a copy gets transported, they should be there. Just unhide the fields in Dev box in the source system (R/3) not BI and capture them in transport and move those changes to QA. Before moving to QA, make sure the fields are avaiable in BI after replication.
thanks.
Wond

Regarding the generic datasource fields

Hi Masters,
I've created one generic datasource(Master data source), which contains exactly 8 fields. Afterwards that datasource is replicated in BW. According to that datasource, fields are created in RSA1. But those fields name and lengths are not name in BW.Is it problem or not? And another one thing is those fields are not belongs to one Master data source. Is it ok?
Pl let me know.
Thanks in advance
Raja.S

Hello Raja,
In BW side you have to map the fields with infoobject in transfer structure. The definition of (Properties) infoobjects which you are mapping must be in sync with the fields you are mapping.
Hope it solves your problem.
Cheers
SRS

CRM Datasource-Delta not Working

Folks,
I am using CRM Standard Datasource 0CMS_RTCM_TRAN-Resale Tracking and Claims Management data..
I have enhanced this Datasource with four fields and transported to Quality system..
no problem with the new additions..Datasource is extracting properly..
but Delta update is not working..Delta Queue is not picking any records..but new transactions are getting updated in the respective source tables..
when i checked in BWA1- am getting these messages:
error message:
(121) MS_RTCM_TRAN: Table SMOXHEAD contains no BDOC name.
Warning messages:
(111) MS_RTCM_TRAN: No mapping found for extract field SLSR_ADDRESS_I..similarily for all the Datasource fields, its showing the same no mapping warning..
its working fine with Full update..but for Delta update am facing these issues..
Can you please explain what could be the reason for this and suggest a proper solution..
Thanks and Regards,
Yog

Hi,
Are there any transactions to change the BDOC name for Standard Datasources??..
In BWA1, when i tried to change these ADAPTER settings, i am getting this message:
"DataSource 0CMS_RTCM_TRAN cannot be edited with this transaction"..
i hope if i specify the BDOC name, Extraction should be happening..
so please suggest where i can perform these changes??..
Note : currently no extraction is happening because of this..
Regards,
Yoga

CRM dataSource fields dont match with BW InfoObject and attributes

Hi
I have installed the 0BPARTNER in the BW system and also activated and replicated the master data datasoutces -0BPARTNER_ATTR, 0BPARTNER_TEXTS in the CRM system.When i execute the datasource 0BPARTNER_ATTR via t-code: RSA3 in the CRM system, the fields of this datasource does not match with the attribute InfoObjects of 0BPARTNER in BW system.
Please help me i am not sure if the above two datasource are to be used for attributes and texts load of 0BPARTNER.I checked this on SAP help and also on SDN.
Thanks.

Hi Dear,
For CRM, Instead of using that data source use 0CRM_BPART_ATTR.
I hope this full fill your requiement.
thanks
obaid

Enhanced datasource field not replicated

Similar Messages

Maybe you are looking for