Enhanced dictation no spaces after punctuation

I just downloaded enhanced dictation (Jan 23 2015). I have Yosemite, macbook air. It does mostly ok, but there are no spaces after periods or commas! Pretty basic... I'm really frustrated. Anyone else have this problem?

If you haven't already done so, please log out or restart the computer and see whether there's an improvement.

Similar Messages

HT6065 enhanced dictation stopped working after this update

Hey all,
After 10.9.1 enhanced dictation no longer works, fn fn pops up the mic, but as soon as it makes the connection it drops off. Regular dictation is fine. Anyone else having this issue/solved it?
Thanks!

I have not tried that lol, derp-da-derp.
didnt even think of that, the path if anyone is looking to try this. ~ System > Library > Speech > Recognizers folder and remove the folder called "SpeechRecognitionCoreLanguages."
Downloading at the moment, will see if it works!
Thanks Eric!!

HT5449 Enhanced Dictation Error: Capitalizes word after a comma.

Enhanced dictation is not as accurate as dictation. The MOST annoying issue for me, is that it often capitalizes the word after a comma! I do not know how this is possible since this is a simple grammatical rule. Sentences do not end with commas.
There are other problems, but if this could be fixed would make the system far more useable.

Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

Enhanced dictation does not work. I've tried everything. Any help?

Hello everybody. After downloading enhanced dictation (spanish-spain), the microphone seems to be Ok but no word is written. Regular online dictation works well. I use a mac-mini i7 16Gb and a micro connected to an external audio card firewire. I've tried to delete and download again several times, to clean the cache, turn on-off with resets,.. but nothing seems to fix the problem. Dictation is important for me to work and I'd like to try with enhanced dictation because I've read that it improves the performance with respect to online dictation.
I've empoyed such a lot of time looking for a solution in the support community and other forums but nothing worked.
Could anybody help me.
Thanks so much in advance

Ok, I reply to myself.
The problem was caused by the microphone and the firewire connection. Enhanced Dictation is not ready to work with my audio hardware (micro Shure and Presonus audio card via Firewire). Although this audio hardware works fine with other software and even with online dictation, when I use it with Enhanced Dictation, the system seems to be working (the micro bars of the microphone in the screen move ok) but no words are written at all.
The solution was to connect it analogically, using an audio connection between my audio card and the line-in connection of the mac mini (stereo).
Hope Apple will solve this problem. I guess many people probably are having the same problem, mainly people with pro audio cards. I hope that this will help them

RH8 After conversion, added space after conditional tag phrase

We just installed RoboHelp 8. After converting my 3 projects from RH7 to RH8, the system added spaces in between words of a condtional build phrase. That's great since it's much easier to see the words -- that was an improvement over version 7.
However, it's also adding a space after the conditional build phrases, which is incorrect. It adds a space before a comma, adds a space before a period if the conditional build phrase occurs at the end of the sentence, etc. But it doesn't look like it does this in every case...I'm not sure why it did this, but it only happened after the conversion to 8.
The generated help appears as in the example below. Note the space before the period in the first sentence and the space before the comma in the second sentence. It has done this on quite a few pages.
Customer Definition Detail
This page allows you to add a new customer or to edit an existing customer . If you are adding a customer , you must complete the detail information and then save it.
Tried to upload the example of conditional build phrase, but it's not letting me.
Thank you in advance for any help you can offer. This would be a lot to manually repair, so I'm hoping someone knows of a way to fix this using a setting.

Thanks for your posts.
After trying everything I could think of the only thing that resolved the issue was replacing any instance of back-to-back conditional text followed by any punctuation with two sentence exactly the same except for the conditional choice.
For example, the original sentence (color indicates conditional build tag):
     For customersmembers, this field indicates transaction limits.
would be changed to these two sentences:
     For customers, this field indicates transaction limits.
    For members, this field indicates transaction limits.
I'll submit this as a RoboHelp 8 bug in the forums (if it hasn't already been submitted).

Enhanced dictation 10.9.4 Not working

Enhanced dictation 10.9.4 stopped working after two days. Just installed this OS update. Regular works, but not offline. Tried restarting, turning on/off--nothing works.
Ideas, or is it just a buggy, useless program?

What model is your Mac? It needs to be from 2011 or later. Go to About This Mac then select 'more info' if unsure. If your hardware is too old you can use a 3rd party program like Airparrot.
Bear in mind, DVD's are blocked from mirroring due to copyright so it's best to connect a DVD player if that's your only intended purpose.

How to install/enable Enhanced Dictation automatically?

Mavericks has a new version of the Dictation feature previously available in Mountain Lion. In Mountain Lion it only worked by (like the iPhone) sending speech to Apple's servers to be processed and therefore required a live Internet connection. Mavericks supports this same mode still, but also now offers an 'Enhanced Dictation' mode where the processing is done locally on the Mac itself and therefore does not require a live Internet connection.
The normal way to enable this Enhanced Dictation mode is to open System Preferences, click on Dictation & Speech and tick the options to turn on Dictation and Use Enhanced Dictation. This will trigger a download and installation of the required software. However as should be obvious this requires manually intervention to do this. If one is wanting to build a number of Macs with this feature enabled this rapidly becomes tedious in the extreme.
Is there anyway to manually download an installer which can be run on Macs to do this? If not is there a way to write a preference e.g. defaults write which would trigger this automtically? Either approach could then be incorporated in an imaging process like DeployStudio.

I don't have a Mavericks machine handy right now (I am currently at home) but the following information should help you.
First the link I provided is for the UK language version, there will be different but presumably similar links for other locations, e.g. USA, Australia, etc. You will need to do the samething I did to find the right link for you I am afraid which is run a packet capture to spot the URL System Preferences starts to download, I would guess most or all will contain SpeechRecognitionCoreLanguage but searching for http://swcdn.apple.com would be another option.
Second, your right, after installing it you also need to set via defaults some preferences. Again not having access to a Mavericks machine right now I cannot tell you the exact settings, but I would look in both /Library/Preferences and ~/Library/Preferences for files relating to speech recognition. Perhaps have both these folders open in the Finder in list view.
I would then in System Preferences turn on the options for Enhanced recognition for your country, yes this will start a download which you would need to do anyway for the packet capture as described above. This will also put the correct settings in the appropriate plist file. You should then in the Finder be able to see which file just got modified, this will confirm which file contains the settings.
You can then run -
sudo defaults read /path/to/file/com.apple.whateveritiscalled
This will read and display all the settings in that file. You can then see which ones contain the settings you need. I think from memory there are two settings you need to look for.
You could stop the download which is done by turning off the settings in System Preferences. You can then manually download the file presumably having found the URL in the packet capture. You can then do
sudo defaults write /path/to/file/com.apple.whateveritiscalled whatevertheprefiscalled whateverthesettingis

How to download enhanced Dictation file for easily share?

Hi everyone,
I want to download a true "file" of enhanced dictation, so i can install it again after i do a clean install n don't need to connect to internet?
(I have limited internet connection!)

Again, this could be due to your location. I'm not sure how much change there should be. You could try and take a look in the User Guide to see if it explains anything there. http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
EDIT: I was able to find this support document http://support.apple.com/kb/HT5025 about the enhanced voice quality. It seems this has to do with Voice Over and may only be available for that. I did not read the entire document, but it would be good reading for you.
Message was edited by: ChrisJ4203

Enable enhanced dictation with a previously downloaded pkg (not using internet)

Hi!
Im trying to enable my enhance dictation but my connection to internet it's super slow and constantly fails, so its impossible for me to install via system preferences ...
so I just download SpeechRecognitionCoreLanguage_en_US.pgk and istall it, but my OS keeps connecting to download every time I try to activate it, its there any way to activate it from a regular pkg installation or a local server or via terminal commands?
Thanks!

I don't have a Mavericks machine handy right now (I am currently at home) but the following information should help you.
First the link I provided is for the UK language version, there will be different but presumably similar links for other locations, e.g. USA, Australia, etc. You will need to do the samething I did to find the right link for you I am afraid which is run a packet capture to spot the URL System Preferences starts to download, I would guess most or all will contain SpeechRecognitionCoreLanguage but searching for http://swcdn.apple.com would be another option.
Second, your right, after installing it you also need to set via defaults some preferences. Again not having access to a Mavericks machine right now I cannot tell you the exact settings, but I would look in both /Library/Preferences and ~/Library/Preferences for files relating to speech recognition. Perhaps have both these folders open in the Finder in list view.
I would then in System Preferences turn on the options for Enhanced recognition for your country, yes this will start a download which you would need to do anyway for the packet capture as described above. This will also put the correct settings in the appropriate plist file. You should then in the Finder be able to see which file just got modified, this will confirm which file contains the settings.
You can then run -
sudo defaults read /path/to/file/com.apple.whateveritiscalled
This will read and display all the settings in that file. You can then see which ones contain the settings you need. I think from memory there are two settings you need to look for.
You could stop the download which is done by turning off the settings in System Preferences. You can then manually download the file presumably having found the URL in the packet capture. You can then do
sudo defaults write /path/to/file/com.apple.whateveritiscalled whatevertheprefiscalled whateverthesettingis

Where does one set space after paragraph in the new Pages 5.0? It used to be under text in the Inspector in the previous version, but I just can't find it in this new version.

Where does one set space after paragraph in the new Pages 5.0? It used to be under text in the Inspector in the previous version, but I just can't find it in this new version. Paragraphs seem to only be dealt with in styles, and the Formatting window for text doesn't seem to have the space after paragraph contrtol that the older Inspector had. What am I missing?

Sorry I did this without looking:
Side panel >Text > Style > Spacing > Turn the triangle > Before Paragraph/After Paragraph/
This is the trouble with the Peeky Boo Contextual Interface that so many wiser heads than mine love to love.
Peter

Space after negating exclamation mark

Hi, is it possible to add a space after a negating exclamation mark in the code formatting rules such as:
if (!true) {} <- I don't want this style
if (! true) {} <- I do want this
I think that the Tools -> Options -> Text Editor settings give me quite limited choices when it gets to customizing your code formats. I want to do this for JavaScript if that matters.

The ! means that iPhoto has lost the link to the actual images
i
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Create a list style with unique space after the last list item?

I should start by saying that I'm a web designer and therefore extremely used to using CSS for type setting to the point that I now become frustrated when going back to the print world
So here's what I'm trying to achieve:
- I want to create a list style for bullet lists
- I want there to be 3pt space after and space before paragraph breaks
- I want there to be 9pt space after the entire list (or last list item)
I can't for the life of me figure out how to do this short of overriding the space after amount on the last item each time I use my style.

Hi supportneeder
Welcome to the forum.
Try this link:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=179&mforum=iworktips ntrick
Pay attention to how +"styles work by example"+. Form up the list levels the way you want them and then select them to make the list style.
Personally I can't help remarking on the obtuse behavior of programmers that they manufactured all the problems on the internet and only now, more than a decade later, patch together "solutions" they struggle to implement due to the legacy of all the awful standards we never needed to have in the first place.
Peter
btw The last list item is always a problem in typesetting. Usually you deal with it by having a particular style for that or the paragraph afte,r all of which can take multiple forms.

Space after hyperlink in JEditorPane

Hi all!
I am displaying an html document in a JEditorPane, which has some hyperlinks. Everything is wotking, except that all the hyperlinks have an extra space after the text which is underlined and is a part of the hyperlink.
I saw this problem in the bug database but marked as closed. However I still have this problem using jdk 1.4.1.
http://developer.java.sun.com/developer/bugParade/bugs/4303958.html
Thanks in advance for your help!

I'm sorry but I posted this by mistake. The topic is duplicated, but the other one has the subject corrected and has duke dollars assigned.

Space After - Text

Hi, I have some problem with the"space after" function.
As you can see in this image, the firts line, the headline, should send the next text, 10 points bellow.
But all the browsers that I test, they ignore this "css rule"...
http://www.pgdesignrio.com/revistas.html
Safari, Firefox, Chrome in Mac. IE 10.0.9

Hi Dandalo,
There's a Muse bug that lets you set negative padding even though it is invalid in CSS.
You have -1 left padding applied to the headline which is making the entire padding CSS invalid.
If you change it back to 0, that should fix the issue. You can continue to use negative first line indent.
Hope this helps.
Abhishek

How to remove space after paragrph in pages on ipad

Can't figure out how to remove space after each paragraph in Pages for Ipad

Settings > General > International > Region Format
Set it to your country to format numbers and dates in the way your country does.

Enhanced dictation no spaces after punctuation

Similar Messages

Maybe you are looking for