Enhanced field was not visible in DataSource

Hi ,
I Enhanced one field to DataSource, But it is not visible in that datasource.
T
he procedure which i followed is:
RSA6 -> Select DataSource -> Click on "Enhance Exctract Structure" -> It will show Append Structure -> Continue -> Add filed -> Activate + Back
When i checked again the same datasource it is not showing the appended field.
Can any one suggest me, wht can i do now to see that Added filed to DataSource.
Thanks and Regards
Rajesh

Hi Rajesh,
go to LBWE Lo cockpit there u find the Datasource click on the link there u find the appended field is marked as Hide and Field only Check boxes u can un mark the Hide check box and activate the data source u find the appended field.
i hope this will help u
Thanks & Regards,
Ramesh

Similar Messages

I have updated iOS 6 in my iPhone 4S and it went perfectly fine. Just after that when I opened the message app I found that the sms body of system generated messages was not visible after tapping on them.

I have updated iOS 6 in my iPhone 4S and it went perfectly fine. Just after that when I opened the message app I found that the sms body of system generated messages was not visible after tapping on them.

The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck.

SQL Expression Fields button not visible in Field Explorer

Hi,
On my Crystal Reports installation I can see the button SQL Expression Fields in Field Explorer but it is not visible on client's installation.
How do I make it visible? I need to create a new report with SQL query for client.
Thanks,
Ajay Audich

Commands are intended to replace the standard linked tables that must users are accustomed to.
I suppose Commands would be considered an "advanced" feature, considering that they require the developer to be able to hand write SQL (our at least copy it from another SQL editor).
If you are comfortable writing reading, writing & editing SQL, Commands will open a the door to a whole new level of control when it comes to creating your data sets.
The biggest problem w Commands is also it's greatest strength... If you're using a Command, CR will assume that you know what you're doing and will not try to rewrite or optimize your SQL in the background. You write it, CR sends it. That means if you write crappy SQL, CR will send your crappy SQL to the db server...
It also means that you can use join types that aren't available in CR and use sub-queries in in your SQL... Basically anything you can do in the db's native editor.
HTH,
Jason

The stock in transit field is not visible in MD04

Hi Team
Stock in transit visible on MD04
STPO 28801084 is internal stock transfer from FI25 to FI28.
Qty of PO is visible in the ´stock in transit´ field on SAO transaction MD04 under plant FI28
when corresponding delivery 1202400481 have been PGId at FI25 (2014/07/07)
Stock in transit NOT visible on MD04
STPO 28502250 is internal stock transfer from FI31 to FI28.
The ´stock in transit´ Qty of PO is not visible on MD04 under plant FI28.
even if the corresponding   delivery 1202323564 have been PGId at FI31 (2014/06/23)
Br, Kiran Unde

Hello
Please take a look on question 9 of the following FAQ note, which explains the standard system behavior:
549752 - FAQ: MRP elements in transaction MD04/MD05
9. Question: Why does the system not display stock in transit for stock
    transport orders with order confirmation (notified orders)?
    Answer:
    Purchase order confirmations do not have to match the original
    purchase order delivery schedule lines. Moreover, the purchase order
    confirmation (view MDLA in materials planning) does not contain the
    same information as the purchase order to determine the stock in
    transit. The display of the stock in transit is therefore not
    implemented for the purchase order confirmation in the materials
    planning evaluation transactions.
BR
Caetano

Enhancement section does not visible at runtime

I created enhancement section in SAP standard program, activated it but it does not visible at runtime. How do I make it available? Thanks!

Hi Anthony,
Have you implemented Implicit Enhancement?
Once code is activated without error there is no other step required.
Refer [Enhancement|https://wiki.sdn.sap.com/wiki/display/ABAP/ThenewEnhancementFrameworkandthenewkernel-basedBAdI] for more information.
Regards
Shital

Field data not visible in Association Applet

Hi all,
There is a vanilla applet "Organization Assoc Applet" of type association list based on business component "Assignment Group Organization"which has two list columns namely Division and Organization.To this applet I added one more list column based on a vanilla field Main Phone Number,but after compiling when I checked data for field Main Phone Number is not visible but as usual data for other two fields(Div and Org) were visible.
Could someone help me in this?
Thanks,
Sambit

Hi,
Where you've added the column? to the Base or Query applet template?
May help you:
==========
Open the Applet in web layout and check the selected Application, it should match your application.
If you don't see the Application follow thiw:
in tools --> View --> Toolbars --> Configuration Context
if the selected Application is the correct one then go to "Applet web template" --> select the wanted template --> goto the web template items --> make sure that no duplicate "item identifire" exist!
Good luck

Appended Field is not visible repectively listet in the DataSource

Hi,
I've ran into a problem which I'm unable to solve. Maybe you can give me a hint.
I've appended a DataSource (0EC_PCA_3) in SAP R3 4.7 by using RSA6 clicking on the extract structure and using the append structure function.
After that the appended field is listed (in a different color) in the extract structure.
In the next step I've activated the extract structure.
When I went back to RSA6 and took a look at the DataSource the new field isn't listet in the field list.
At this point I don't know what went wrong. So please let me know if you got an idea to solve this issue.
Regards
Axel

Hi Gaurav,
thanks for your hint to deactivate and activate. Maybe it led us to the right track for the solution.
I'm not able to reactivate my BADI-Implementation.
When I search the internet according to the error message:
Field "C_T_DATA" is unknown. It is neigther in one of the specific tables nor defined by a "DATA" statement.
Every answer says that the implementation should be activated anyway, what works for the implementing class, but not for the implementation itself.
I've done the implementation according to this manual:
[url] http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3001894b-b1fb-2910-77ba-e80b6f2053b7?quicklink=index&overridelayout=true
I don't know how to fix this error either. The source code I used is the same used in this manual (simple approach page 11) but with differnet table and fields.
Edited by: Axel M. on Aug 19, 2011 3:34 PM

Invitee field is not visible

I do not have the "Invitee" field visible when adding a calendar event.

Hi
Give Enough Space between this Two Fields and Enable Field Height Adjustment in Format Tab in Properties.
Also check once delete this two fields log off and Logg in and Do it once again & check.
Try in another DB PLD whether it was Happening r not.
Giri

All fields are not visible while creating transformation

Hi experts,
I am trying to create transformaion between a LO datasource and DSO designed by me. In R3, in RSA6 I can see more than 45 fields but while creating transformation only 30 fields are available.
I tried by replicating the datasource multiple times but no change.
kindly suggest where I am doing wrong.
thanks and regards,
rajesh.

Hi Rajesh, Please follow the follwing steps:
Goto RSA6, select your data source and then click on change and save button.
this will take you to transfer structure. There check the fiels you want to see have hide check box or not. If yes then un hide them. Then save the transfer structure.
Execute the datasource in RSA3. You should be able to see the filds you have unhide in previous step.
replicate the data source in in BW
Goto transfomation in change mode and then to routine. Now you will be able to see the fileld in the routine.

Screen-field value not visible

Hi All ,
I have added couple of fields to the standard transaction .Used a badi to achieve that.Now am able to send the values from one of the methods in the same badi to the custom field and a standard table is getting updated (which was created with append structure ).But am not able to see that value in the custom field after saving .
How come this is possible as the DB is getting updated .
Is there anything to be done in the module pool program or how ??
Regards ,
Hemanth Nugur .

hi .Am using this badi to add custom fields in trading contract(WB22) .WB2_ADDITIONAL_DATA.
Everything is working fine except am not able to see the value passed onto the field .I am passing the value from the method CHANGE_BEFORE_UPDATE .
Thanks

Enhanced Data Type not visible in SPROXY

Hello experts,
I've enhanced my personal data type with some extra fields...
I activated this and the change can be seen in the Message Type and the Service Interface.
Next, I go to my ECC6.0 backend system and take transaction SPROXY. There I need to regenerate my proxy.
After I did that, I expected to see my added fields in my input structure as an append structure, but that's not the case.
What's wrong? Please advice.
Thanks a lot!
Dimitri

Hi Dimitri,
There should not any problem while generating proxyies again please chek two things in your case
1.Wether the Activation is done prperly or not.
2. Conncetions from ESR to PI are proper ot not ( rfc connection LCRSAPRFC between PI and R/3).
Please chek the fillowing link which has the information about the issue in visibiility of content in ESR and the necessary configuration steps to be followed to enable the updated PI content in ESR as response to Question 2. in the responses.
Thread:
Re: Simple questions about proxy
Configutaion guide for checking Proxy connections
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Thanks,
Ram.

Key fields are not visible in output condition table

Hi,
     I have created few conndition tables using V/61. But i can not see Key field. It is not displaying. But when I check thru VK11 i can see that all fields are marked as key fields. example of table B018.
My problem is that , i want to make few filed non key fields rest of fileds as key fields so that there should not be any duplicate ntry based on key fields. also I do not want to maintain these two fields for each record.
Is there any exit to modify and view thesefields? or it is a security issue...bold
Your earliest response is highly appreciated.\
Thanks,
AKS

Hi Raga,
Please check the documentation under the customizing path:
IMG -> Sales and Distribution -> System Modifications ->
Create New Fields (Using Condition Technique) ->
New Fields For Pricing
Then click on the paper icon
Here is explained how to setup additional fields for pricing,
not present in the standard.
Notice the following rules:
1. the new fields must have name beginning with 'ZZ' or 'YY' in order
   to avoid problem after upgrade
2. add the new field in the table T681F for the application 'V' and the
   usage 'A'
3. these new fields must be appened to the structures KOMKAZ or KOMPAZ
   (depending they are header or item fields)
4. you should provide these fields by implementing the userexits
   USEREXIT_PRICING_PREPARE_TKOMK (header fields)
   USEREXIT_PRICING_PREPARE_TKOMP (item fields)
   in program MV45AFZZ for sales order, RV60AFZZ for invoice.
In that documentation there are some examples too.
Please check it.
Regards,
Alex

Infopath fields binding not visible in datasheet view Sharepoint 2010

Hello Everyone!!!
I have created a custom list in sharepoint then customized the infopath form in infopath form designer. I have created a drop down and bind the dropdown form the soap web service method. It is working fine when I open the form.
But when i open the DataSheet View of custom list, field is displaying but the drop down list is not getting bind with data. what is issue. Infopath binding and rule don't work with datasheet view?
Please reply

Hi,
As you mentioned dd data is appearing in form but not in datasheet view...
maybe there are compatibility issues
with 32 bit and 64 bit component of office and IE.
Try reinstalling "2007 Office System Driver: Data Connectivity Components" (link below)it installs a 32-bit version
of the Datasheet component that will work with the 64-bit version of Office 2010 as long as you are using a 32-bit version of an Internet browser.
MS Support Article https://support.microsoft.com/kb/2266203/en-us
Re-install https://www.microsoft.com/en-us/download/details.aspx?id=23734

Field not appearing in datasource

Hello Experts,
I have enhanced extract structure with a new field. written code to populate the field in CMOD.
But this field is not apperaing in datasource.
I have used debug mode in RSA3 and found that field is getting populated but it is not appearing in output.
Can anyone please help.
Thanks ,
Saurabh

These are steps to appending a field, just in case one was missed:
Step 1: Append structure via RSA6, by finding datasource and then clicking on the Functional Enhancement button; this will open up the append structure. NOTE***If this has already been created, you can access the append structure via SE11 (usually ZA and then the structure name)
Step 2: Add field to the append structure and activate
Step 3: Go back into RSA6 and find the datasource and click on the change icon.
Step 4: Validate the the Hide field is not check for this new field that you added and that the 'Field Only Known in Customer Exit' is checked
Step 5: Save this datasource
Step 6: Open CMOD, enter your project that you have created and then click on components and display
Step 7: Choose EXIT_SAPLRSAP_001 for transactional data enhancements (ZXRSAU01) and EXIT_SAPLRSAP_002 for master data enhancements (ZXRSAU02)
Step 8: Activate associated cmod code above and put a breakpoint (hard or soft one) in your code to validate that it is accessing this cmod code that you created.
Step 9: RSA3 and execute in debug mode until breakpoint is hit
If all of the steps above are executed, this field should be populated. There may be an instance that the view of your RSA3 extraction is not showing you all the fields because of the display of this output but if you highlight a record and then click on the magnifying glass above, you will see all the data in that record but this view will only show you the populated fields so if their is not data, there is probably something wrong with your cmod code.

Customized fields Not visible in GUI but visible in PCUI why

Hi,
Can anybody help me, i have a problem which is as followes,
I Enhanced Three fields for Campign in CRM Throw EEWB, these three fields are not appearing in GUI but its appearing in PCUI.
Can some body can give me valueble inputs to solve this issue.
Thanks & Regards,
Sivakumar.

Hi Suyash
In the TS, on the right side, see if these fields are part of the DS.
If yes, then click on them and drop them on the left, in the Transfer structure.
If they are not availabel in the Datasource, then go to RSA6 in R/3 and see if the extract structure of this DS has these fields hidden, i.e if theres a check mark on hide coloumn....
If these fields are not visible in the extract structure then let me know
Regards
Prakash
Assigning points on SDN is a way of saying thanks !!

Enhanced field was not visible in DataSource

Similar Messages

Maybe you are looking for