"enhanced for Lion?"
I have Pages on my iMac. I will upgrade to Lion soon. The App Store says Pages is available as Enhanced for Lion ($9.99). Do I have to pay again to keep Pages for Lion or won't the app update itself for Lion as usual? I want to know before I upgrade. Thanks.
If you don't get an answer here, you might post in the Pages discussion at https://discussions.apple.com/community/iwork/pages
Similar Messages
-
I want to know before I upgrade. In the Mac App Store Apple offers Pages as "enhanced" for Lion at a price. If I upgrade to Lion and want to continue using Pages, do I have to buy the enhanced version of Pages? Didn't Apple update Pages for Lion?
I think I know what you are asking, and my answer will be the same as Peter's. The advertising for Pages in the Mac App Store can be confusing. Many of us have thought that the version there is an upgrade. It is actually the same as the Pages in iWork 09, but arranged differently such that it can be purchased separately from KN and Numbers.
So you can update Pages with Software Update at, no charge and when you purchase Lion, you're ready to go.
Jerry -
EFI update 2.1 for lion recovery in Mountain lion
When the EFI update 2.1 for lion recovery in Mountain lion is done and when i restart my Macbook, the sleep indicator flashes and the machine makes a beeping sound for about 3 seconds and the machine starts up. Any thing to be worried about..? I beleive the the update is not installed bcoz it still shows in the App Store as update available. Pls advise.
MACBOOK 13 INCH MID 2010
OS X MOUNTAIN LION -
Suggest EnhanceMent For SALES area determination In stock Transfer.
Suggest EnhanceMent For SALES area determination In stock Transfer.
V02V0001 Sales area determination for stock transport order Doesnt Work,Is user exit required, as the sales area will be different. Incase of Intra company stock transfer the process will be as under:
Create Purchase Order (ME21N)
Create Delivery in background (VL04, VL10a, VL10C, etc)
Change Delivery for picking / packing & PGI (VL02n)
Create Billing Document (VF01)
Assumption: Stock Transfer configuration is in place. Assistance can be taken from SAP Best Practices in help.sap.com
Incase of Inter-company, the process will be as under:
Create Sales Order (VA01)
Create Delivery (VL01N, etc)
Change Delivery (VL02N)
Create Billing Document (VF01)
Assumption: Configuration is in place. Assistance can be taken from SAP Best Practices in help.sap.com
Regards,
Rajesh Banka -
I have created a new partition on the Mac HD for Lion as I would like to dual boot. Do I need to install Snow Leopard on that partition before installing Lion? If so, can I use one of my Time Machine backups to do this?
zoominnana wrote:
Can I set up 2 different time capsule backups? one for the lion partition and one for the snow leopard partition?
No, you can't partition a Time Capsule's internal HD. Both partitions will back up to the same sparse bundle. keeping the backups for each partition separate.
Time Machine will not take the two OSX partitions as two different computers, but for best results, exclude the Snow Leopard drive from backups on the Lion partition, and exclude the Lion partition from backups on the Snow Leopard partition.
There may be some files on the Lion partition that Time Machine on Snow Leopard won't like, among other things. See #10 in Time Machine - Frequently Asked Questions for details. -
I found out that an 06 mac pro cannot be updated to anything more recent than lion. They guys at the local shop told me this after they tried to update it for me so I could run logic pro 9 in 64 bit mode. I bought lion. Waited two days for the emails. Spent hours following the instructions which sounded so simple until you try them. Finally I found the "redeem" button that was hidden because the size of my safari window was too small to show it and there was no bar at the bottom to scroll over. Without googling "how do you find the app store" and "how do you find quick links" I never would have figured it out. I only mention this so that others may learn from my mistakes. Finally I downloaded lion, supposedly, but nothing happened. There is no indication that anything downloaded, other than the fact that when I try to download it again, it says it's already been downloaded. I spent four hundred bucks at the shop updating, plus whatever they charged me for lion, and I've still got snow leopard and logic pro running at 32 bits. I'm pretty sure nobody can help me, but could you please arrange for the return of my time?
You can go to "Purchases" tab and check again.
If OS X Lion is still not downloading, try at a different network environment.
By the way, Mac Pro (2006) with a newer graphics card runs Mavericks perfectly with modifications in the installer.
It's not allowed to be discussed here, but you can simply google how to do it. -
Scanner and Software for Lion with document feeder to Scan thousands of photos
I have an older HP PhotoSmart Print 7280 that can scan photos. On the PC HP had software that would allow you to scan through the document feeder and batch correct/crop the photos before creating files. This printer/scanner doesn't have HP software for Lion. I am looking for a Scanner or Software solution that will allow me to scan through the feeder and to crop in batches. I have used Image Capture on the Mac to scan. It work great to crop and edit photos if you put them them on the flatbed. You can load 3 photos and it will allow you to crop them and to make them individual files. However if you use the "feeder" setting it treats what you are scanning as a document and you don't have the ability to edit/crop before accepting the files. So what you get are images that have a lot of white space around them.
I am looking for a solution that would allow me to do this in a quicker manner than 3 photos at a time on the flatbed. I Don't rule out buying a new all in one printer to do this. I also looked into other scanning software like VueScan, but it doesn't appear to have a batch edit/crop mode after running through the feeder.
Any advice on how to attack this would be great.
Thankstk3900 wrote:
what you get are images that have a lot of white space around them.
That should be easy to fix with something like SintraWorks PDF Nomand or PDF Clerk Pro. -
Badi / Exit / Enhancement for replacing INSMK during PO creation
Hi Gurus,
we want to default the INSMK field (stock type) during Purchase Order creation..
Can someone help me findind the right BAdI / exit / enhancement for it?
Thanks in advance,
Regards,
AlessioHi Alessio,
You may check these first:
Re: Negative postings to MVER table
Re: select stock type
Thanks,
Gordon -
I'm running 10.6.8 Snow Leopard fine on my MacPro1,1, Dual-Core Intel Xeon, 2.66 GHz Mac, but I need to install Lion 10.7.0 to run a program I need.How do I install OS 10.7 NOT 10.7.5, because I get this message when I try to install 10.7.5, which I've downloaded:"This update requires Mac OS X version 10.7." on a mac running Snow Leopard 10.6.8, So i need to install the original 10.7.0 over the 10.6.8 i.e. where can I find the original install app for Lion OS 10.7.0? The original Lion 10.7. is not avaialable for purchase from the App store or anywhere, even C-Net . Where can I find it to purchase?
Also it seems I cannot install Mountain Lion over 10.6.8 as advertised. When I go to purchase I get this message: "We could not complete your purchase. OS X Mountain Lion is not compatible with this computer." I think my computer can handle it (specs above) Are there any workarounds to this?If you're getting a "This update requires Mac OS X version 10.7" message, than you have the updater and not the full installer. Go to your Purchases section of the Mac App Store and you should see the full version there. But it may be 10.7.5, though in my system is shows as being from 2011 which would appear to be the original version.
As to Mountain Lion, that's supported only on the Early 2008 Mac Pro or newer.
Regards. -
I need the drivers of EDR Enhanced for LabVIEW 8.6 or more, please.
Hello, I want to acquire a signal with the microDAQ-Lite of EAGLE Technology and I need the EDR Enhanced LabView Driver. The one I have is for labview 6.x or 7. Currently I am working in Labview 2010 so I am needing the drivers for this version. I have found in a webpage (http://edr-enhanced-for-labview.software.informer.com/8.5/ ) that a version developed by National Instruments for version 8.5 exists, it says it is free, but i cant find it. Does anyone knows if a newer version exist? or where can I find the latest one?? Please help.
Thanks in advance.
Alejandra NI does not develop drivers for third-party DAQ devices. Contact the vendor or use the driver you have. You can load version 6 and 7 into LabVIEW 2010.
-
Hello, I have just installed my license for Mac OS v 10.6.3 and installed updates including security updates.
I have a licence for Lion that is sitting on Apples computer somewhere.
How do I access my account and install Lion on my machine?
Beyond that I want to upgrade to Maverick but given I work out the first step upgrading to Maverick should be easy.
Thanks, Julian R AWelcome to Apple Support Communities
OS X Lion could be purchased from the Mac App Store (and now, at the Apple Online Store). Once you purchase it, you can download it as many times as you want for free.
Open > Software Update, and install the most recent Mac OS X version. It should be Mac OS X 10.6.6 or newer. Then, open the Mac App Store, go to Purchases, log in with your Apple ID and download OS X Lion. Make a backup before upgrading and check that your apps are compatible > http://www.roaringapps.com
You can upgrade to OS X Mavericks from Mac OS X 10.6.6 or newer without any problem, so upgrading to OS X Lion first is a waste of time. Open the Mac App Store and download OS X Mavericks -
I have OSX 10.6.8 - how do I make room on mac HD for Lion?
I have a Mac Pro 1.1 with OSX 10.6.8 Snow Leoprad. I want to move all my music, photos, and videos to other hard drives so i will have more room in Mac HD for Lion etc. I have not been to do this. Any suggestions?
Thanks.If you have a MacBook Pro 1,1 then forget it, stay on 10.6.8.
Use Carbon Copy Cloner and clone your OS X 10.6 boot volume to another blank GUID OS X extended formatted drive. (use the Secure Erase > Zero feature on the drive first to eliminate any bad sectors) this is your 10.6 clone so you can boot and use PPC based apps your going to lose going to 10.7/10.8 or to come back to 10.6 if you won't like the Lions.
Hold option key down on a wired keyboard to boot from the clone drive and check it out.
Next zero erase your entire 10.6 original boot drive holding option from the 10.6 installer disk
Reinstall 10.6 from the disks (same account name), reinstall iLife from the second disks and call Apple if you want to upgrade to 10.7 specifically but your MacPro 1,1 can go to 10.8 directly from AppStore.
Now your machine is bare bones, install your 10.8 compatible third party programs/upgrades etc.
http://roaringapps.com/apps:table
On another drive setup duplicate Music2, Pictures2, Movies2 and Document2 folders and copy your files from the clone into them. Thus only on the boot drive is programs and OS X, no files.
You can command drag items like the original Documents, Music, Pictures folders off the Finder window sidebar and use the Music2, Pictures2, Movies2 etc there instead. However some programs will still try to save things automatically in the original user folders.
When you launch say iPhoto in 10.8 against the older 10.6 iPhoto Library, it will update it.
This sounds like a lot more work, but it's really giving you a solid footing, a stable fast system and free of crapola.
I always take a extra mile in being through to eliminate as many potential issues as possible, as it's cheaper and less hassle than cure, my machines always run well and fast, even Windows ones. -
BHow do I set up the dual boot for Lion and snow leopard oon the same internal hard disK
What does Time machine do under the dual boot?I am also considering putting Lion and SL on separate hard drives.
Since this is an iMac forum, I assume you will use an external drive as the second drive. Use one that connects via firewire, not via USB.
Both on a single drive -
OK. Doing it on a single drive means you will need to partition the internal drive. Although this is straight forward, it is always best to back up the existing drive first, just in case. It's a good idea to have a backup on a different drive, anyway.
To do that, clone the entire internal drive to the external drive.
I would suggest, though, that you first partition the external drive. I would suggest four equal-size partitions, provided the drive is big enough - at least 1.0TB, though a 2.0TB drive might be better. You can use OS X's disk utility to do that. Go to the Partition page in Disk Utility, select your external driv in the list on the left, then use the Partition Layout menu to select the number of partitions. Set the format to Mac OS Extended (journaled) GUID for all partitions. Click the Apply button.
The easy way to do the cloning is to use a cloning utility such as Carbon Copy Cloner. Clone the entire internal drive to one of the partitions on the external drive. Then test boot to it (use Startup Disk in System Preferences to do that) to verify the integrity of the clone. At that time I would suggest you change the background design/picture for the desktop to aomething other than the one used on the original drive - this can be a handy visual reminder of which volume you are booted to.
Then add a partition to the internal drive. To do that, run Disk Utility. Go to the Partition page, select your internal drive in the list on the left, but do not use the Partition Layout menu this time. Instead, click the existing volume in the graphic display, then click the plus ("+") button underneath that display -
This will add a partition without erasing the existing information - i.e., the drive will end up with two partitions, one of which will contain your original boot volume.
Use Startup Disk to re-select your original boot violume, and restart back into it.
Now, clone the original drive again using CCC, but this time to the second partition of the internal drive, the one you just added.
Boot to that freshly cloned volume to verify it. Then, while still booted to it, install OS X 10.7 Lion onto it.
This will result in your original Snow Leopard on the first partition of the internal drive, and Lion on the second partition of the internal drive.
The external drive will have Snow Leopard on one partition, one partition will be empty (available for a clone of Lion if you wish, or use it for extra storage). The remaining two partitions can be used for Time Machine backups - one for Snow Leopard, one for Lion.
If you want to have each OS on its own hard drive, then you can use the first clone of Snow Leopard to the external to be upgraded to Lion, or upgrade the orignal on the internal drive to Lion. Be sure to boot to the volume to be used for Lion before installing it so that Lion is installed onto the correct boot volume.
You can then use the empty partition on the internal drive as the backup (or Time Machine) volume for the OS on the external drive, and vice versa. In this arrangement you may need only partition the external into two volumes.
If you have a different scheme in mind for partitioning, feel free to do that. I don't use Time Machine, so don't have the need to make space for it. Carbon Copy Cloner can be used to do incremental backups after the initial backup - but I don't use that, either. I'm old school - after the inital cloning for backup, I do manual backups of files on the fly.
Comments -
* I would suggest keeping both Snow Leopard and Lion on the internal drive. Reason - even though firewire 800 is fast, it is still noticeably slower than an internal drive. OS's on an external drive will run slower than those on an internal drive.
• I don't like the concept of Time Machine. Amongst other things, it seems to want more space on the target volume than it actually needs; and it is not a bootable replication. A clone of a bootable volume is bootable.
• It was just a few days ago that I went through the same process as you are planning. One slight difference - I used a 1.0TB external partitioned into 3 equal volumes, since I had no need to allow space for Time Machine. I have Snow Leopard and Lion each on its own partition of the internal drive; and cloned backups of each on the external drive, plus one GP partition on the external drive.
• If you have not yet downloaded Lion, be prepared for it to take a while; it's almost 4GB in size. Probably be a good idea to defeat sleep for the duration.
• Cloning takes a while, but not that long - it took 30 minutes to clone 45GB to the external drive, and 45 minutes to clone it to the second internal partition. -
Implicit enhancement for report painter reports(For GRR3 and CJE3)
Hi,
We have a client requirement to add 5 fields (In selection screen) to report painter reports ( Reports of CJE3 and GRR3 ).We created Z reports as a copy of standard reports, added required 5 fields by implementing SAP notes and other settings.We have also done implicit enhancement for all these reports to make change in the behaviour of new fields.This is working fine in the development client but the problem is once we transport this to other client new reports get generated( With new name ) and implicit enhancement will be lost.
For eg:in development client for CJE1/CJE2 report the program name will be "GPAVPSATWFP4NN0YRDBIQBHI8MQ"
but when we transport it to other client new program "GP8O1UCNZTJYY5LTO8GN0UW2GQB" is generated in which implicit enhancements are not found.
Can you please suggest how to handle implicit enhancement in such cases? Or what is the correct way to transport it.
Thanks in advance
Regards,
ShekharHi,
Thanks for the quick reply..
I have already done implicit enhancement as you said ,my problem is to transport it to another client.
I have implemented implicit enhancement for one report lets say it as "ABC", and i transport it to another client with all the enhancement. But in another client new program "XYZ" is getting generated for same report( dynamic programs ), so my implicit enhancement is present but its applicable to "ABC" program but not for "XYZ".
Can you please suggest how can i handle this??
thanks in advance,
Greeshma.
Edited by: Accgreeshma on Jan 23, 2012 3:04 PM -
Implicit enhancement for report painter (CJE2 & GRR3 reports)
Hi,
We have a client requirement to add 5 fields (In selection screen) to report painter reports ( Reports of CJE3 and GRR3 ).We created Z reports as a copy of standard reports, added required 5 fields by implementing SAP notes and other settings.We have also done implicit enhancement for all these reports to make change in the behaviour of new fields.This is working fine in the development client but the problem is once we transport this to other client new reports get generated( With new name ) and implicit enhancement will be lost.
For eg:in development client for CJE1/CJE2 report the program name will be "GPAVPSATWFP4NN0YRDBIQBHI8MQ"
but when we transport it to other client new program "GP8O1UCNZTJYY5LTO8GN0UW2GQB" is generated in which implicit enhancements are not found.
Can you please suggest how to handle implicit enhancement in such cases? Or what is the correct way to transport it.
Thanks in advance
Greeshma.Hi,
Thanks for the quick reply..
I have already done implicit enhancement as you said ,my problem is to transport it to another client.
I have implemented implicit enhancement for one report lets say it as "ABC", and i transport it to another client with all the enhancement. But in another client new program "XYZ" is getting generated for same report( dynamic programs ), so my implicit enhancement is present but its applicable to "ABC" program but not for "XYZ".
Can you please suggest how can i handle this??
thanks in advance,
Greeshma.
Edited by: Accgreeshma on Jan 23, 2012 3:04 PM
Maybe you are looking for
-
I have a new computer, with some new music on it in my Itunes Library. How do I put that new music from here onto my existing ipod (which has a ~1500 song library from an old computer which is no longer accesible, and which music I do not want to er
-
No response message in Proxy to JDBC synchronous scenario
Dear Team, I am working on synchronous scenario Sender ABAP proxy <===> SAP PI 7.31 <===> Oracle Database.All the necessary proxy configuration has been successfully tested. Business Scenario: ABAP proxy will send a single Vendor Id to Oracle DB as r
-
HT1688 how can i tell if my iPhone 4s is unlocked?
How can i tell if my iPhone 4s is unlocked?
-
Transfer setting to a new (Mac) Computer
Hi. I just got a new Mac. How do I transfer the settings (FTP, site locations, etc) from DW on my old computer, to my new one? Both versions of DW are the same. Thanks!
-
How do I change the default so my pictures in BridgeCC will open in PhotoshopCC?
How do I change default program to Photoshop CC?