Enhanced login security and password ageing in SAP R3 Enterprise 110

Hi,
today we will activate "Enhanced login security and password ageing" on our R3 (SAP R3 Enterprise 110) development environment.
new parameters
Enhanced login security and password ageing
login/min_password_lng = 8
login/password_expiration_time = 365
login/min_password_diff = 2
login/min_password_letters = 1
login/min_password_digits = 1
anyone any expirience on possible problems which can occur after activating these new settings.
Many thanks in advance
Patrick Van Vlerken

No... this should do what it sais in the tin.
Read,
http://www.*********************/password_sap.htm
Regards
Juan

Similar Messages

How to pass login name and password

Hi all,
If this question has been asked before, please let me know, and I am sorry for duplicate the question raising.
I want to use the login name and password which are entered from the left frame(topic frame) in the right frame ( the content frame).
I have 3 jsp programs, "A.jsp" is for validate the login (name and password), "B.jsp" contains a form-submit to add the records to a database. "C.jsp" is the actual one which does the updating to the database.
Q1, how can I re-use the login name and password for "B.jsp" and "C.jsp"?
Q2, is there any security problem to do so?
your useful reply will give me a great help.
ths

or try here:
http://forum.java.sun.com/thread.jsp?forum=31&thread=308840
http://forum.java.sun.com/thread.jsp?forum=31&thread=295349

Config Tool - Login name and password

Hi,
When I Launch the Config tool, it normally connect to the database directly without prompting for login name and password. Where does it get login information from and where does it store these information.
Your help is greatly appreciated.
Vince

It always runs on the local machine where you Java stack is installed and connects to the default database schema (Java). You can look at the config.properties file under C:\usr\sap\J2E\JC00\j2ee\configtool for details
Regards
Abdul

Trying to pass Login username and password from a non-Oracle Form

I have a form that I am trying to use to pass a login username and password to an Oracle form. The problem is I know Oracle 10g web reports can take login parameters in a URL, but I can't seem to figure out how to encode/hide it and have Oracle read it. I want to be able to hide the username and password (obviously for security) and I also want to be able to pass special characters... does anyone have suggestions? It seems even in Oracle forms there are some issues passing login info because I have built in parameter forms... I have given myself quite a headache either way! We are trying to upgrade from an old, old version of forms and reports and are trying to use as much orginal code as possible. It all works if I pass plain text user name and password... any help would be sooooo appreciated. By the way on the Oracle side I am still pretty much an infant developer... please talk slow and use simple words... ;-p
Thanks again for any help!
Va

...asking me to enter username and password on a non-secured website, or else thy will destroy my account. Is it legit ?
It is definitely a scam. Delete it immediately.
For more information, see this document:
Identifying fraudulent "phishing" email

Help - Login Names and Passwords Disappear

I recently encountered a problem while using Safari. As I usually do, I accessed a website where I have to enter a login name and password, like this one. When I click "submit" or press "enter" both the name and password simply disappear. I retype the information, and again its gone when I press "enter." This happens on every site that requires a login name and password, including this site. I am using Firefox in order to access this site and post this thread.
Does anybody have any ideas as to how to fix this? Safari is my preferred browswer.
torinogiorgio

Dennis
Thank you for your reply. I solved my problem. Many sites requiring a login name and password, including Apple Discussions, also require that you allow them to set cookies in your system. I had set Safari Preferences > Security to never accept cookies. Apparently, doing this prevents these websites from accepting any login name or password you enter. Resetting Preferences > Security to accept cookies again allows me to use a login name and password.
torinogiorgio

How do I stop the Key from popping up everytime I log on to a site with login name and password. This pop up is big and annoying and I'm ready to go back to IE than have that thing pop up huge and annoying.

The pop up that asks if I want to save this login name and password everytime I login to a site. It is huge and annoying as hell. I just want to have an option to stop it. I know it's there, I don't need to be reminded everytime and if I wanted it to remember I would use it. Give me a break.

For anyone coming in to find this, I located my answer here:
[Special Applet Attributes|http://java.sun.com/javase/6/docs/technotes/guides/plugin/developer_guide/special_attributes.html#codebase]
Thanks for reading.
Sorry for the interruption.

How can i delete a saved login name and password from facebook thats on my computer

im wantin to delete someone that has saved their login name and password on facebook through my computer and i want it off

See also:
* http://kb.mozillazine.org/Deleting_autocomplete_entries
* http://kb.mozillazine.org/Password_Manager

HT4157 I just got an iPad 16GB+3G. When I try to set up a cellular data account (settings cellular data view account) it wants the login info and password,which I don't have because I have yet to set up the account. How do I get to a "set up account" scre

I have a new iPad2 16GB+3G. ( Only got this yesterday.) I have set up a wireless router so am able to use WiFi at home. When I attempt to set up a cellular data connection (ATT) I get to the "view account" which asks for my login ID and password, which of course I do not have yet because I haven't set up an account yet. How do I get to a "set up account" screen?

I'm taking that this is a used iPad. Have you removed the microSIM and got one of your own?
Also, have you cleared it out with Settings > General > Reset > Erase All Content and Settings?
And if that does not work you may need to contact the cell provider.

SharePoint custom page it is asking login name and password

Hi Friends,
I have created custom pages in SharePoint 2013.When ever if I click any custom page it is asking login name and password every time.But for SharePoint admin page it is not asking every time login name and password.
How can we fix this issue.It is very urgent.Please can anyone help to fix this issue.
Thanks,
Tiru
Tiru

Yes Inder is correct.
http://social.technet.microsoft.com/Forums/office/en-US/0e08f9cb-1939-428d-9194-d21975ef70d3/created-sharepoint-2010-custom-login-pagewindows-authentication-but-it-asks-me-for-credentials?forum=sharepointgeneralprevious
Use fiddler to check the root cause of the autentication issue.
Please remember to click 'Mark as Answer' on the answer if it helps you

HT5129 i forgot my mobileMe login name and password

How can I retrieve my mobilMe login name and password ? I forgot them. I guess my login name was an email, but I still don't remember it

So why is it that if MobleMe is discontinues that I am getting MobileMe error when I try to sync my contacts? This message comes up that I have 350 contacts that will be deleted. I don't know how it came to that conclusion but I do not want to delete them. Click on the ? in the warning box up pops the mobileme signin to continue. It seems that if MobileMe has been discontinued this type of behavior should also be discontinued. Maybe that's why people continue to have trouble with trying to access Mobileme... because that is where the Mac system is directing them??? Still haven't solved my sync problem.

Windows Login Name and Password

Hi,
I am developing an application, which requires the windows login name for greeting and password for validating and granting privileges.
Could someone please give me the pseudo code for getting the windows login name and password.
Thanks,
Mitra.

I'll try to validate some other parameter instead of
password. The password will be stored but it will be
encrypted.Bad Thing (TM). Never store passwords.
When we are able to get the UserName using
JavaScript, why can't we get it using Java.I told you how to get it. And what does Javascript have to do with anything? Just because you can drive through a very narrow alley with your bicycle, you should be able to do the same with a truck? Javascript and Java are not related in any way.

What is the default admin user account login id and password in Windows 8?

Hi all,
The current admin acccount in Windows 8 system are changed to Standard and no other Admin account is available in the system.
What is the default admin user account login id and password in Windows 8?
Or
Is there way to change the User role for the account?
Please use Marked as Answer if my post solved your problem and use
Vote As Helpful if a post was useful.

I am able to login as a Normal user, can not login as administrator.Hence can not install any software or change my user settings or create a new user.
What is the default admin password. How can i reset it form my user account
C:\Users\Amit>net user Administrator
User name                    Administrator
Full Name
Comment                      Built-in account for administering the computer/domain
User's comment
Country/region code          000 (System Default)
Account active               No
Account expires              Never
Password last set            7/26/2012 12:57:03 PM
Password expires             Never
Password changeable          7/26/2012 12:57:03 PM
Password required            Yes
User may change password     Yes
Workstations allowed         All
Logon script
User profile
Home directory
Last logon                   9/16/2013 1:16:30 PM
Logon hours allowed          All
Local Group Memberships      *Administrators
Global Group memberships     *None
The command completed successfully.

Login ID and Password

Okay - so I am very new at this -
I recently bought an iBook G4 - and yesterday bought an iSight - and so today I opened iChat for the first time and set it up (or so I thought).
I have MSN messenger on my computer -which I have been using to chat.
Now - when i log into Ichat it asks for my Login ID and password - and everytime I go to put it in it says that iChat was unable to login to AOL Instant Messenger because my screen name or password was incorrect.
Well as far as I know - no it's not...but how can I find out what these two things are?
Please help.
Lara

Hi Lara,
Welcome To The Apple Discussion Pages.
Following on from Sandra's good advice. (I read it the same way).
This page explains how to set up an AIM or @mac name as your account name. http://www.siriusaddict.com/ichat.html
The Jabber side of iChat can connect to the MSN service but will require you get a Jabber name from one of these Public Servers
How to set this side is described here at Jabber.org.au.
The finer points of linking to the MSN or other IM services is explained Here at the AllForces Blog
Just summarise the Jabber side.
You need a Jabber name created at one of the Public Server.
Based on the need for a Server that has a MSN Transport. See the All Forces Blog.
The Jabber.org.au site tells you how to go about getting a name and setting up iChat - the AllForces Blog tells you how to set up the Transports.
You will find that you have first to download and use anouter Jabber client to actually create a Jabber account somewhere as iChat can not do this yet.
If you were looking to Video chat to MSN Buddies then iChat can not do this. In fact MSN for Macs can not do this either (Good Old Microsoft).
There are two Open Source MSN clones that can.
aMSN Although there are some reports that the Audio side of this is hit and miss.
Mercury is another.
Hopefully this will point you in the right direction.
11:56 AM Thursday; May 25, 2006

J2EE Admin Console login ID and Password

Any one knows what are the login ID and password for the Admin Console? Thank you.

try username/password : admin/adminadmin

I have created Apple id and password to set up icloud but its not taking in the same login id and password

I have created Apple id and password to set up icloud but its not taking in the same login id and password. Should i have an Apple product in order to install icloud? becoz i am using HP PC
thanks ria

You can on create an iCloud account on an iiPhone, iPad or iPod Touch( running iOS 5 or higher) or Mac (running OS X Lion or higher).
After creating an account on one of these devices you can then sign into the account on your PC, but you can't create the account on a PC.

Enhanced login security and password ageing in SAP R3 Enterprise 110

Similar Messages

Maybe you are looking for