Enhanced USB port replicator 43R8811 and dual monitor

I have problem with USB port replicator. I cannot put a right resolution to monitor (wide screen monitor). Replicator's settings say that I can use up to 1280x1024 resolution but monitor support i.e. 1400x1050 resolution which port replicator should support by user manual.
If I put monitor direct to my X300 laptop I can use monitor's right resolution (1680x1050).
Is it drivers problem or what that I cannot put a right settings?
-Paul-

I'm having trouble understanding your phrasing.
The Enhanced USB Port Replicator I recently purchased supports 1440x900 and can be configured to do so.  I did have to install the drivers by downloading from the web (they were provided on a CD -- convenient since my laptop came with no CD/DVD drive :-).  Once the drivers  were installed, it happily suports 1440x900.  Did you already install the software?  Older versions of the port replicator don't support above 1280x1024, but that should not be the case with the Enhanced one.
So you should be able to set any resolution up to 1440x900.
Of course "1400x1050" would be a higher resolution than 1440x900, and thus not supported right?

Similar Messages

  • Enhanced USB Port Replicator under Vista with blank taskbar

    I have an annoying bug where the vista taskbar goes blank under Vista.  I'm running an X300 with the Enhanced USB Port Replicator attached to an external monitor.  I have set the external monitor as the primary monitor.  With this configuration, the taskbar usually goes blank -- i.e. the taskbar shows nothing except a window frame and the start button.  There are no applications shown, no quicklaunch icons, no tooltray icons... nothing.  The taskbar is still functioning correctly, and it will show thumbnails of open applications, or allow you to click on any items that are there but not displayed.  Any idea why this bug is there or how to fix it.
    I found it really annoying and problematic till I found an quick workaround... unlock the taskbar and stretch it out and it will begin displaying properly again.

    I have an X301 running Vista Business.  The 2 second freezes are really annoying.
    Has anyone tried the displaylink driver http://www.displaylink.com/downloads.html to see if it helps?

  • Enhanced usb port replicator Windows 7 Driver

    I have a T400s and just upgraded to Windows 7 and have been unable to find a Windows 7 driver for my Lenovo Enhanced usb port replicator.  I have checked the list of beta Win 7 drivers and it does not seem to be listed.  Any help would be greatly appreciated, thanks. 

    I have this and didn't install ANY extra drivers for it.
    Everything is recognised however you will need to get the Displaylink driver for the video from the Display link site...
    Lenovo X200 Tablet / 350Gb HDD / 4GB RAM / Windows 7

  • Is the Enhanced USB Port Replicator Really Hot-Pluggable?

    Folks,
    I have the T61 and am just getting to know the very nice Enhanced USB Port Replicator.  We have a wireless KB/mouse, video and external hard drive, as well as the ethernet cable, all plugged in.
    SITUATION "HOT PLUGGABLE":  The somewhat sparse documentation (that's probably a good thing, if it works as advertised) says that the whole thing is "hot pluggable", and specifically mentions hard drives.  The implication is you don't have to turn your laptop off to disconnect.  WOW, a huge time saver (and a distinction with the Dell laptop I have at work, with a docking station that corrupts the files if you don't shut everything down before disconnecting).
    BUT SEAGATE HAS WARNING:  Seagate documentation for the popular FreeAgent Pro line of stylish external hard drives says that you absolutely MUST execute the Vista "USB safe removal" gambit in order to prevent file corruption -- or even partition corruption on your external drive.  THEN THEY EVEN SUGGESTION UNPLUGGING THE DATA AND POWER CABLES.  This is now in the realm of fantasy as well as inconvenience.  Which leads me to think that the documentation was written by a lawyer and not a technical person.
    WHAT DO YOU THINK?  Is the new "Enhanced USB technology", which is written about on USB resource sites, capable of providing true, safe storage hot pluggability?
    FOOTNOTE:  I'd like to believe the thing is truly hot-pluggable.  I'm just wondering if there are any open files related to the whole real-time backup thing from the Seagate software, if this would cause a problem.  Is the USB smart enough to handle that?
    Thanks for any advice.
    LD
    Solved!
    Go to Solution.

    download the keyboard customiser software, in which you can assign a certain key to function as the Fn key on the laptop keyboard. After unpacking go to your driver/swtool folder and then install it from there.
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67288

  • Vista 64 support for Lenovo Enhanced USB Port Replicator?

    Does anyone know if there will be Vista 64 support for the "Lenovo Enhanced USB Port Replicator"?
    Thanks,
    A

    every port will install native under vista x64.   if displaylink isn't picked up then you can download the driver here.
    (edit: typo)
    Message Edited by erik on 09-12-2008 08:58 PM
    ThinkStation C20
    ThinkPad X1C · X220 · X60T · s30 · 600

  • Lenovo Enhanced USB Port Replicator SILENT INSTALLATION (distribution)

    Hi!
    I have problem with silent installation of the "USB Port Replicator".
    I have an CD with autorun (usbportrep.exe starts), nd i need to install in silently on client computer.
    usbportrep.exe hasn't any switches like \s or \hidden or \quiet.
     I tried to made response file, but it doesn't helps.
    Could you help me?
    Thanks a lot! 

    I have installed it.
    During installation I copied sources from %temp% folder.
    Package installs:
    Lenovo USB Port Replicator (non msi)
    Display Link Core Software (msi)
    Lenovo Display Adapter (msi)
    Then I captured first application. And compiled it ot msi.
    I have made customization by two transform files for "Display Link Core Software" and "Lenovo Display Adapter"
    After that I made batch file:
    msiexec /i LenovoUSBPortReplicator-1.22.msi ALLUSERS=1 ARPNOMODIFY=1 ARPNOREMOVE=1 ADDLOCAL=All REBOOT="ReallySuppress" /qn
    msiexec /i "DisplayLinkCoreSoftware.msi TRANSFORMS=DisplayLinkCoreSoftware.mst ALLOW64BIT=No WIN2KSP4=Yes WINXPSP0=No WINXPSP1=No WINXPSP2=Yes WINSERVER2003=No VISTA=Yes ALLUSERS=1 ARPNOMODIFY=1 ARPNOREMOVE=1 ADDLOCAL=All REBOOT="ReallySuppress" /qn
    msiexec /i LenovoDisplayAdapter.msi TRANSFORMS=LenovoDisplayAdapter.mst ALLOW64BIT=No WIN2KSP4=Yes WINXPSP0=No WINXPSP1=No WINXPSP2=Yes WINSERVER2003=No VISTA=Yes ALLUSERS=1 ARPNOMODIFY=1 ARPNOREMOVE=1 ADDLOCAL=All REBOOT="ReallySuppress" /qn

  • 3000 v200 + Lenovo Enhanced USB Port Replicator + Samsung SyncMaster 2043WM - Can't make it work

    Hi there! Have spent tons of time solving this - but if I plug my SyncMaster screen into the port replicator, my 3000 V200 does show a mirror image on the SyncMaster (but its blurred and does not fit the screen) but at the same time I can't make the system recognize that I have two different screens running.
    If I plug the SyncMaster directly into the 3000 v200, it recognizes that I have two screens and the graphics are better (but not great) - but all I wanted was just a very convenient docking station like arrangement.
    I have tried the software the came with the port replicator (many times)

    I am having a very similar problem but do not have an answer either.  I am running an X61 Type 7676A12 with a Lenovo ACP50 port replicator FRU part number 40Y8160.  I am running Windows XP Pro.  The port replicator has never been very great and would not restore the external monitor picture properly when the laptop had been in sleep mode however it was serviceable if not optimal.  After downloading and installing the October MS security updates the machine would get a BSOD when the port replicator was plugged in.  Remove the replicator and reboot and it worked ok.  Plug it in again and BSOD.  I tried upgrading the drivers from 5.1.4a to 7.1.1.03Aug07 and then to 7.1.2.  No go.  Emailing Targus with the problem got no response.  The port replicator is now relegated to my junk heap of useless rubbish.

  • USB Port Replicator II and IEEE1284 - Windows XP

    I have a port replicador (Px1098e-1prp) and it is impossible to make work LPT (IEEE1284) nevertheless in Windows 98 works perfectly. I have a M30-801 and I have also proven in several computers and it wont works with Windows XP. How can I make it works?
    Thanks!

    Drives is correct for Windows XP. (V1.10) 02/08/04 To the second question: IF I can use the 4 ports without problems, everything works except the LPT. Since I have said I have proven in two PC's and in both it happens the same. In Windows 98 IF it works perfect! but in Windows XP no!

  • Dual display with Lenovo USB Port Replicator 43R8770

    Hi,
    I have installed the Lenovo USB port replicator using the 1.0.0.1 drivers.  I am running Windows XP on a Thinkpad X300.
    I can successfully get into dual display mode but when I try to make the external monitor my primary display it will not work.  It just switches my primary monitor back the notebook LCD without displaying any errors. 
    If I disable the notebook display I can set the external as the primary but as long as the notebook is enable the external cannot be set as the primary.
    Has anyone ever seen this before?
    Solved!
    Go to Solution.

    I know it's an old discussion, but I wanted to pos​t instructions on getting the dual-monitor setup w​orking, as it took me a while to get it right.  Th​is is using a Lenovo x301 with Windows XP SP3, 
    Lenovo Enhanced USB Port Replicator and 2 Dell 19"​ 1280x1024 analog flat panel monitors (I know..I k​now...)  My 
    boss didn't want to use the Laptop display.  Just ​the two external monitors.  Note: before proceding​, please make 
    sure you've installed the Port Replicator drivers. 
    Connect left monitor (primary display) to x301 VGA​ port.
    Connect right monitor (extended display) to Port R​eplicator VGA port.
    Click on the Intel(r) Graphics Media Accelerator D​river for Mobile icon in the system tray and selec​t GRAPHICS OPTIONS --> OUTPUT TO --> MONITOR
    Click on the Lenovo Display Adapter icon in the sy​stem tray and select EXTEND TO --> RIGHT
    Hope someone finds this helpful down the road.
    Message Edited by BMCit on 01-28-2009 01:56 PM

  • Help - T42p and Lenovo Enhanced Port Replicator does not external monitor

        T42p  Win Xp SP2  2GB Memory ATI Mobility Fire GL T2
    I had an old style port replicator that supported my ThinkVision 17" flat panel monitor.  The port replicator died and I got a replacement  - Lenovo Enhanced port replicator.  If I go to the Control panel/Display it now shows 3 monitors and when I try to enable #2 or #3 it takes the extend my desktop setting but when you press the identify button it only recognizes #1 (my T42).  My external monitor is blank..............any ideas where to start?

    No, I could not get help from any place. I did some research on my own and realized that the Lenovo port replicator (with Lenovo name on it) is actually theTargus ACP50 which is sold as a universal port replicator. The difference is that the Lenovo unit has a driver specific to Lenovo. I even went to Targus website and download their latest “generic” driver. The driver worked with the Lenovo computer fine, but still does not resolve the issues that you and I see. So I concluded that it is the port replicator crappy design.

  • X1 and USB Port Replicator with digital video - hangs system

    Hi
    with the X1 to help with docking it everyday at the office I have a USB Port replicator with digital video. I am not using the digital video but the USB ports, head phone and mics plus ethernet.
    When I plug it in it detects it OK, I then installed the software. But after reboot it looks to stall when logging into windows, screen flickers back and forth and locks up the operating system. I unlplug it and reboot and window is working fine.
    Note as I mentioned I am not using the digital output but instead using an external monitor via the display port on the back of the laptop.
    Also its is very slow to boot (Lenovo bios splash screen is there for about a minute)
    I have gone into the bios and turned off all other bootable devices just leaving the laptops hard drive.
    As a work around I have removed the software and I am getting the basic functionality of the port replicator, but not the ethernet.
    I have run the update manager but does not appear to show a need to update the drivers.
    Model X1 (1293-CTO)
    Windows 7

    Hi, I have this same exact problem.
    Video (anything from youtube to downloaded shows, movies) will freeze for 5-7 seconds at a time. The sound continues to play while the video is 'frozen', and the video resumes after that.
    It will happen on its own, with no bumping, but it is more prone to happen if I do something like increase the volume within the media player.
    Any suggestions are much appreciated!

  • USB Port Replicator 2nd monitor doesn't work on restart with Vista

    Greetings wise wizards of Lenovo:
    I'm helping a friend with the USB Port Replicator, who is running Windows Vista Home Premium on her Acer laptop. She has all of the necessary hardware requirements, and I've installed the Lenovo USB Port Replicator drivers with once with Vista (automatically installing the drivers), once with the CD, and finally from the Lenovo website. The problem is that the port replicator works fine upon installation, but as soon as Vista is restarted, not only does a second monitor not appear automatically, it doesn't appear at all.
    Connecting the second monitor to the laptop VGA port works fine, and I can extend the desktop across both the laptop and the second monitor... it is only a problem on restart with the port replicator. I've uninstalled and resintalled three times now, once with letting Vista provide the drivers automatically, once with the CD, and once with the website download.
    Any suggestions will be highly appreciated.
    Many thanks in advance,
    Zovoth

    Mines not working on XP. Works fine until I re-boot then I have a hard time getting it to work. I've tried unplugging the ac adapter, usb, tried switching my monitors and still nothing. Both monitors are functioning properly. The icon for the repilicator does not show up down the clock. It's in my program files with the only option to uninstall.
    Comon Lenovo, there hasn't been an answer to this question since 2008???

  • Firefox does not paint the window if Windows 7 Basic theme is selected and Fujitsu USB port replicator PR07 is used

    If I use "Windows 7 Basic" theme on my laptop (Fujitsu Lifebook A532), the Firefox window is not painted.
    I see only the border of the window, the content not. As soon as I switch back to the "Windows 7" theme,
    it works again.
    It could be related to the graphics driver (from Intel) of my new laptop.
    Before I had a desktop computer, and did not have this problem.
    Update: the problem occurs only if I use my port replicator (Fujitsu USB Port Replicator PR07).
    If I unplug the replicator, and use only the monitor of my laptop, everything is fine.

    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''Please create a screenshot of the problem you're seeing by following the guide mentioned at [[How do I create a screenshot of my problem?]].
    Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.

  • Thinkpad USB Port Replicator with Digital Video - extended monitor shows only mouse icon

    Hi,
    I have been using my Thinkpad USB Port Replicator with Digital Video for quite a long time with my previous employer laptop. I recently switched job and got a new laptop (Dell XPS 3, Win 8.1). While installing/paring this laptop with the port replicator, I had some issues e.g. extended monitor not getting identified etc. I updated the drivers and now I am able to identify the extended monitor. But the extended monitor shows only the mouse icon and nothing else. I have upto date Intel HD graphics drivers installed in the laptop. Intel's Graphics control panel doesn't show the extend option for the USB monitor, but able to still move the mouce icon to the extended monitor.
    Any help/pointers to fix this issue is highly appreciated.

    I have the exact same problem on my W510. Everything but the screen Works. I cannot however do duplicate screens. That would help a Little bit, so I could use the big monitor instead of just the laptop.
    Please fix this Lenovo!

  • ThinkPad USB Port Replicator

    ThinkPad USB Port Replicator works with BeTWIN??

    We (displaylink) have not tested specifically with betwin so could not guarantee it works. However it seems to work with a 2nd graphics card and that is how a displaylink display will appear to the OS so I think it should work.
    I think it will depend on how betwin works. Might be better to ask betwin if they know of any issue.
    Wim

Maybe you are looking for