Enhanced USB Port Replicator under Vista with blank taskbar

I have an annoying bug where the vista taskbar goes blank under Vista. I'm running an X300 with the Enhanced USB Port Replicator attached to an external monitor. I have set the external monitor as the primary monitor. With this configuration, the taskbar usually goes blank -- i.e. the taskbar shows nothing except a window frame and the start button. There are no applications shown, no quicklaunch icons, no tooltray icons... nothing. The taskbar is still functioning correctly, and it will show thumbnails of open applications, or allow you to click on any items that are there but not displayed. Any idea why this bug is there or how to fix it.
I found it really annoying and problematic till I found an quick workaround... unlock the taskbar and stretch it out and it will begin displaying properly again.

I have an X301 running Vista Business. The 2 second freezes are really annoying.
Has anyone tried the displaylink driver http://www.displaylink.com/downloads.html to see if it helps?

Similar Messages

Vista 64 support for Lenovo Enhanced USB Port Replicator?

Does anyone know if there will be Vista 64 support for the "Lenovo Enhanced USB Port Replicator"?
Thanks,
A

every port will install native under vista x64. if displaylink isn't picked up then you can download the driver here.
(edit: typo)
Message Edited by erik on 09-12-2008 08:58 PM
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Is the Enhanced USB Port Replicator Really Hot-Pluggable?

Folks,
I have the T61 and am just getting to know the very nice Enhanced USB Port Replicator. We have a wireless KB/mouse, video and external hard drive, as well as the ethernet cable, all plugged in.
SITUATION "HOT PLUGGABLE": The somewhat sparse documentation (that's probably a good thing, if it works as advertised) says that the whole thing is "hot pluggable", and specifically mentions hard drives. The implication is you don't have to turn your laptop off to disconnect. WOW, a huge time saver (and a distinction with the Dell laptop I have at work, with a docking station that corrupts the files if you don't shut everything down before disconnecting).
BUT SEAGATE HAS WARNING: Seagate documentation for the popular FreeAgent Pro line of stylish external hard drives says that you absolutely MUST execute the Vista "USB safe removal" gambit in order to prevent file corruption -- or even partition corruption on your external drive. THEN THEY EVEN SUGGESTION UNPLUGGING THE DATA AND POWER CABLES. This is now in the realm of fantasy as well as inconvenience. Which leads me to think that the documentation was written by a lawyer and not a technical person.
WHAT DO YOU THINK? Is the new "Enhanced USB technology", which is written about on USB resource sites, capable of providing true, safe storage hot pluggability?
FOOTNOTE: I'd like to believe the thing is truly hot-pluggable. I'm just wondering if there are any open files related to the whole real-time backup thing from the Seagate software, if this would cause a problem. Is the USB smart enough to handle that?
Thanks for any advice.
LD
Solved!
Go to Solution.

download the keyboard customiser software, in which you can assign a certain key to function as the Fn key on the laptop keyboard. After unpacking go to your driver/swtool folder and then install it from there.
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67288

Enhanced USB port replicator 43R8811 and dual monitor

I have problem with USB port replicator. I cannot put a right resolution to monitor (wide screen monitor). Replicator's settings say that I can use up to 1280x1024 resolution but monitor support i.e. 1400x1050 resolution which port replicator should support by user manual.
If I put monitor direct to my X300 laptop I can use monitor's right resolution (1680x1050).
Is it drivers problem or what that I cannot put a right settings?
-Paul-

I'm having trouble understanding your phrasing.
The Enhanced USB Port Replicator I recently purchased supports 1440x900 and can be configured to do so. I did have to install the drivers by downloading from the web (they were provided on a CD -- convenient since my laptop came with no CD/DVD drive :-). Once the drivers were installed, it happily suports 1440x900. Did you already install the software? Older versions of the port replicator don't support above 1280x1024, but that should not be the case with the Enhanced one.
So you should be able to set any resolution up to 1440x900.
Of course "1400x1050" would be a higher resolution than 1440x900, and thus not supported right?

Enhanced usb port replicator Windows 7 Driver

I have a T400s and just upgraded to Windows 7 and have been unable to find a Windows 7 driver for my Lenovo Enhanced usb port replicator. I have checked the list of beta Win 7 drivers and it does not seem to be listed. Any help would be greatly appreciated, thanks.

I have this and didn't install ANY extra drivers for it.
Everything is recognised however you will need to get the Displaylink driver for the video from the Display link site...
Lenovo X200 Tablet / 350Gb HDD / 4GB RAM / Windows 7

Lenovo Enhanced USB Port Replicator SILENT INSTALLATION (distribution)

Hi!
I have problem with silent installation of the "USB Port Replicator".
I have an CD with autorun (usbportrep.exe starts), nd i need to install in silently on client computer.
usbportrep.exe hasn't any switches like \s or \hidden or \quiet.
I tried to made response file, but it doesn't helps.
Could you help me?
Thanks a lot!

I have installed it.
During installation I copied sources from %temp% folder.
Package installs:
Lenovo USB Port Replicator (non msi)
Display Link Core Software (msi)
Lenovo Display Adapter (msi)
Then I captured first application. And compiled it ot msi.
I have made customization by two transform files for "Display Link Core Software" and "Lenovo Display Adapter"
After that I made batch file:
msiexec /i LenovoUSBPortReplicator-1.22.msi ALLUSERS=1 ARPNOMODIFY=1 ARPNOREMOVE=1 ADDLOCAL=All REBOOT="ReallySuppress" /qn
msiexec /i "DisplayLinkCoreSoftware.msi TRANSFORMS=DisplayLinkCoreSoftware.mst ALLOW64BIT=No WIN2KSP4=Yes WINXPSP0=No WINXPSP1=No WINXPSP2=Yes WINSERVER2003=No VISTA=Yes ALLUSERS=1 ARPNOMODIFY=1 ARPNOREMOVE=1 ADDLOCAL=All REBOOT="ReallySuppress" /qn
msiexec /i LenovoDisplayAdapter.msi TRANSFORMS=LenovoDisplayAdapter.mst ALLOW64BIT=No WIN2KSP4=Yes WINXPSP0=No WINXPSP1=No WINXPSP2=Yes WINSERVER2003=No VISTA=Yes ALLUSERS=1 ARPNOMODIFY=1 ARPNOREMOVE=1 ADDLOCAL=All REBOOT="ReallySuppress" /qn

3000 v200 + Lenovo Enhanced USB Port Replicator + Samsung SyncMaster 2043WM - Can't make it work

Hi there! Have spent tons of time solving this - but if I plug my SyncMaster screen into the port replicator, my 3000 V200 does show a mirror image on the SyncMaster (but its blurred and does not fit the screen) but at the same time I can't make the system recognize that I have two different screens running.
If I plug the SyncMaster directly into the 3000 v200, it recognizes that I have two screens and the graphics are better (but not great) - but all I wanted was just a very convenient docking station like arrangement.
I have tried the software the came with the port replicator (many times)

I am having a very similar problem but do not have an answer either. I am running an X61 Type 7676A12 with a Lenovo ACP50 port replicator FRU part number 40Y8160. I am running Windows XP Pro. The port replicator has never been very great and would not restore the external monitor picture properly when the laptop had been in sleep mode however it was serviceable if not optimal. After downloading and installing the October MS security updates the machine would get a BSOD when the port replicator was plugged in. Remove the replicator and reboot and it worked ok. Plug it in again and BSOD. I tried upgrading the drivers from 5.1.4a to 7.1.1.03Aug07 and then to 7.1.2. No go. Emailing Targus with the problem got no response. The port replicator is now relegated to my junk heap of useless rubbish.

Dual display with Lenovo USB Port Replicator 43R8770

Hi,
I have installed the Lenovo USB port replicator using the 1.0.0.1 drivers. I am running Windows XP on a Thinkpad X300.
I can successfully get into dual display mode but when I try to make the external monitor my primary display it will not work. It just switches my primary monitor back the notebook LCD without displaying any errors.
If I disable the notebook display I can set the external as the primary but as long as the notebook is enable the external cannot be set as the primary.
Has anyone ever seen this before?
Solved!
Go to Solution.

I know it's an old discussion, but I wanted to post instructions on getting the dual-monitor setup working, as it took me a while to get it right.  This is using a Lenovo x301 with Windows XP SP3,
Lenovo Enhanced USB Port Replicator and 2 Dell 19" 1280x1024 analog flat panel monitors (I know..I know...)  My
boss didn't want to use the Laptop display.  Just the two external monitors.  Note: before proceding, please make
sure you've installed the Port Replicator drivers.
Connect left monitor (primary display) to x301 VGA port.
Connect right monitor (extended display) to Port Replicator VGA port.
Click on the Intel(r) Graphics Media Accelerator Driver for Mobile icon in the system tray and select GRAPHICS OPTIONS --> OUTPUT TO --> MONITOR
Click on the Lenovo Display Adapter icon in the system tray and select EXTEND TO --> RIGHT
Hope someone finds this helpful down the road.
Message Edited by BMCit on 01-28-2009 01:56 PM

USB Port Replicator 2nd monitor doesn't work on restart with Vista

Greetings wise wizards of Lenovo:
I'm helping a friend with the USB Port Replicator, who is running Windows Vista Home Premium on her Acer laptop. She has all of the necessary hardware requirements, and I've installed the Lenovo USB Port Replicator drivers with once with Vista (automatically installing the drivers), once with the CD, and finally from the Lenovo website. The problem is that the port replicator works fine upon installation, but as soon as Vista is restarted, not only does a second monitor not appear automatically, it doesn't appear at all.
Connecting the second monitor to the laptop VGA port works fine, and I can extend the desktop across both the laptop and the second monitor... it is only a problem on restart with the port replicator. I've uninstalled and resintalled three times now, once with letting Vista provide the drivers automatically, once with the CD, and once with the website download.
Any suggestions will be highly appreciated.
Many thanks in advance,
Zovoth

Mines not working on XP. Works fine until I re-boot then I have a hard time getting it to work. I've tried unplugging the ac adapter, usb, tried switching my monitors and still nothing. Both monitors are functioning properly. The icon for the repilicator does not show up down the clock. It's in my program files with the only option to uninstall.
Comon Lenovo, there hasn't been an answer to this question since 2008???

HP 2005pr USB 2.0 Port Replicator - Video not with my Surface Pro 3

Hi everyone,
I've spent tons of hours already trying to get the HP 2005pr USB 2.0 Port Replicator working with my Surface Pro 3 and no luck. I mean, the USB replication / hub works, meaning that if I plug in a USB mouse / keyboard, they work. It recognizes the device in Device Manager and the ViewSpan application is running. But if I plug in a display in the VGA, nothing happens, no monitor gets detected, and even if I "force-detect" one it still doesn't display anything.
I've tried with 3 driver versions so far:
0.2.5 - not working at all. Reboots my Surface while installing. (this one is on the device itself).
3.X - which is the first with support for Windows 8 I think. I can install it and everything works as described above - meaning no VGA.
5.3.X - same story as above.
I've tried uninstalling, restarting and uninstalling several times with both versions. No luck. And I've literally been on every forum where people have problems with the replicator and nothing helped.
Anyone had any luck getting such a setup to work?
Or any ideas on how to get it to work?
Thanks.

Hi @blinkk2
I see that you are having problem connecting an external monitor to your Microsoft Surface Pro 3 through the HP USB Port Replicator. As the USB ports are working with the mouse and keyboard we know what the Port Replicator itself is working this is going to be something with the drivers on the Surface. I would recommend contacting Microsoft Support to see if they can recommend a graphics driver for you.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

X1 and USB Port Replicator with digital video - hangs system

Hi
with the X1 to help with docking it everyday at the office I have a USB Port replicator with digital video. I am not using the digital video but the USB ports, head phone and mics plus ethernet.
When I plug it in it detects it OK, I then installed the software. But after reboot it looks to stall when logging into windows, screen flickers back and forth and locks up the operating system. I unlplug it and reboot and window is working fine.
Note as I mentioned I am not using the digital output but instead using an external monitor via the display port on the back of the laptop.
Also its is very slow to boot (Lenovo bios splash screen is there for about a minute)
I have gone into the bios and turned off all other bootable devices just leaving the laptops hard drive.
As a work around I have removed the software and I am getting the basic functionality of the port replicator, but not the ethernet.
I have run the update manager but does not appear to show a need to update the drivers.
Model X1 (1293-CTO)
Windows 7

Hi, I have this same exact problem.
Video (anything from youtube to downloaded shows, movies) will freeze for 5-7 seconds at a time. The sound continues to play while the video is 'frozen', and the video resumes after that.
It will happen on its own, with no bumping, but it is more prone to happen if I do something like increase the volume within the media player.
Any suggestions are much appreciated!

Thinkpad USB Port Replicator with Digital Video - extended monitor shows only mouse icon

Hi,
I have been using my Thinkpad USB Port Replicator with Digital Video for quite a long time with my previous employer laptop. I recently switched job and got a new laptop (Dell XPS 3, Win 8.1). While installing/paring this laptop with the port replicator, I had some issues e.g. extended monitor not getting identified etc. I updated the drivers and now I am able to identify the extended monitor. But the extended monitor shows only the mouse icon and nothing else. I have upto date Intel HD graphics drivers installed in the laptop. Intel's Graphics control panel doesn't show the extend option for the USB monitor, but able to still move the mouce icon to the extended monitor.
Any help/pointers to fix this issue is highly appreciated.

I have the exact same problem on my W510. Everything but the screen Works. I cannot however do duplicate screens. That would help a Little bit, so I could use the big monitor instead of just the laptop.
Please fix this Lenovo!

ThinkPad USB Port Replicator

ThinkPad USB Port Replicator works with BeTWIN??

We (displaylink) have not tested specifically with betwin so could not guarantee it works. However it seems to work with a 2nd graphics card and that is how a displaylink display will appear to the OS so I think it should work.
I think it will depend on how betwin works. Might be better to ask betwin if they know of any issue.
Wim

X301 Thinkpad USB port Replicator unattended install

I want to install the USB Port Replicator software http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS012816 via our SCCM environment.
The setup file does not seem to be able to do a unattended installation.
Can anyone help me?
Jesper

Please call our HelpCenter and explain what you need and ask that your case be escallated to Level 2. Our Level 2 support team is working with customers to provide instructions and a package that can be deployed silently for the USB Port Rep. Hopefully in the future the released driver package can be updated to provide this support.

My iphone5 wont charge with usb port but works fine with wall plug... Infact computer. Doesn't recognizes the iphone

Battery not charging with usb port but works fine with wall plug.. So the prob is computer is not detecting the iphone5 . This problem started after upgrading to 6.1.3 version

Try to see what happens on another computer. If it works on another computer, the issue is not at the iPhone.

Enhanced USB Port Replicator under Vista with blank taskbar

Similar Messages

Maybe you are looking for