Enhancement about tcode prrw
hello everyone,
today,i implemented the badi 'trip_post_fi',there is a method called 'EX_ZWEP_COMPLETE'.in which,i want to change the person-number in the item line of internal table 'ZWEP'.but when i changed and continue to run , the program will short dump soon.
who can tell me why and how should i do?
thank you very much!
Hi
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
Regards
Pavan
Similar Messages
-
TCode PRRW: Document Currency not taken from Travel Expense Report Currency
Hi,
We created a Trip Request using TCode TRIP and also created Travel Expense Report for the same Trip in which some of the payments were to be made to Vendor. We have Travel expense receipts in currency SGD. After settling the Trip and creating Posting Run, we made postings to FI using TCode PRRW. As a result of TCode PRRW, system considered INR as document currency and made postings in INR (same is also reflecting in the FBL1N report for Vendor).
Why system is considering INR as document currency instead of SGD as the expense receipts were entered in SGD in Travel Expense Report?
Regards,
CMC TeamHi Aldo Manuel Sanz Castro,
Can you please explain in detail what are the changes you had done i am also facing the same problem if you share information in detail alone with screen shot it will very helpful to me
thanks in advance
thanks
Trinath -
About Enhancement for Tcode IHC1EP, IHC1ED, IHC1IP
Hi, Experts
Which badi or User Exit is executed after payment order posting?
Thanks you very much!Hi
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
Regards
Pavan -
Exit or Enhancement for TCode FB02 to manipulate Due Date
Hi,
We would like to change the value on the due date field based on some custom logic in TCode FB02 on the item detail screen (program SAPMF05L screen no 304, SAP version 4.7). Is there any user exit or BADI for this?
We have tried various user exits but nothing seems to work. We found one BADI, which we thought would work, ADJUST_NET_DAYS, but this is marked for internal use (SAP use) only.
Please help.
Thanks.
JohnHi Friend,
Exits,
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not sen
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
FEDI0001 Function Exits for EDI in FI
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
SAPLF051 Workflow for FI (pre-capture, release for payment)
Badi's,
AC_QUANTITY_GET
AC_QUANTITY_GET
BADI_ENJ_ALT_ADR
BADI_ENJ_ALT_ADR
BADI_F040_SCREEN_600
BADI_FDCB_SUBBAS01
BADI_FDCB_SUBBAS02
BADI_FDCB_SUBBAS03
BADI_FDCB_SUBBAS04
BADI_FDCB_SUBBAS05
BADI_MIRO_SPLT_ADD
BADI_PRKNG_NO_UPDATE
BADI_TAX1_XTXIT_SET
F050S008
FBAS_CIN_LTAX1F02
FBAS_CIN_MF05AFA0
FI_AUTHORITY_ITEM
FI_DOC_DISP_LI
FI_GET_INV_PYMT_AMT
FI_HEADER_SUB_1300
FI_PAYREF_BADI_010
FI_TRANS_DATE_DERIVE
INVOIC_FI_INBOUND
RFESR000_BADI_001
Enhancement Spot
AC_QUANTITY_GET Transfer of Quantities to Accounting - Customer Exit
BADI_ENJ_ALT_ADR Go to alternative vendor/customer data
BADI_TAX1_XTXIT_SET
FI_DOC_DISP_LI Diversion to Document Items (FB03)
Thanks,
santhosh
Edited by: santhosh kumar on Dec 23, 2010 8:02 AM -
Enhancement for Tcode HRBEN0001
Hi Experts,
I have a requirement to default the selection date on the screen for Tcode HRBEN0001. The selection date is dependent on certain employee's eligibility criteria. I checked and could not find a suitable BADi or User Exit to achieve this. If anyone knows of any explicit enhancement to achieve this, please let me know.
Regards.Jyothi,
go to tcode smod - utilities - find and give package name as PBEN which will give all the user exits
to find out the BADI put a breakpoint in GET_INSTANCE method of class CL_EXITHANDLER and check the parameter EXIT_NAME and execute the tcode to find out the badi
Thanks
Bala Duvvuri -
Badi or enhancement for tcode CM25
hi all,
i have to show a warning msg in tcode cm25, wen user will try to drag the work order from orders(pool)
to work centers if the work centeres are different.
eg.
wen i am trying to drag a work order 'abc' from orders(pool) to work centers, if work ordrer in work center is different
say 'xyz' then it should show a warning message.
please help if there is any badi or enhancements spots for the same.
I tried below user exits. But i am not able meet my requirement.
CY040001
CY040002
CY190001
CYPP0002
CYPP0003
CYPP0004
CYPP0005
CYPP0006
Thanks n Regards,
Mukesh YadavHi Mukesh,
use below link to understand BADI or User Exit of any transaction.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/0041d4e6-1e43-2e10-0db4-9386abe98fe6?quicklink=index&overridelayout=true
Regards,
Gaurav. -
Hi experts,
The two fields in this Tcode screen(200) owner allocation(ES51,ES52, have date format DD/MM i want to make it to DD/MM/YY.So please help me out to find the screen exit for it & EPROPD is the structure for those to fileds.
Developer.Hi Saurabh,
How you add your new fields into internal table.
Like have you append structure "QALS_D02".
If yes then if you see the form "FORM create_fieldcat_l USING tabname TYPE slis_tabname." in program "RQEEAL10".
Program creating the fieldcatalog dynamically by using structure "QALS_D02".
FORM create_fieldcat_l USING tabname TYPE slis_tabname.
DATA h_fieldcat_wa TYPE slis_fieldcat_alv.
DATA h_index LIKE sy-tabix.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = g_repid
i_internal_tabname = 'OBJECT_TAB'
i_structure_name = tabname
i_client_never_display = ' '
CHANGING
ct_fieldcat = g_fieldcat_tab[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
if you see the above form then you come to know that after creating field catalog dynamically by using FM they are doing some changes to fieldcatalog table "g_fieldcat_tab[]" and finally export that table to memory id 'FIELDCATALOG'.
Solution - Create implicit enhancement implementation at the end of above mentioned FORM. Inside implementation do modification for your new added fields and again export that fieldcatalog table to memory.
If you have any doubts feel free to ask.
BR,
Vijay -
hi,
run the tcode LM00,system tell me User ** has no profile definition,how can i do,thank you!can anybody tell me and give me some document about RF sapconsle.I have answered this in your other thread.
https://forums.sdn.sap.com/click.jspa?searchID=2610230&messageID=3442707 -
Reg: Detailed information about Tcodes ST22,SM12,OS06,SM66,ST04
Hi,
Can any one give me more details about the tcodes sm37,os06,sm66,st04,sm12.
thanks
praveena.Praveena,
ST22 is used to analyze the dumps/runtime errors across the system which occur due to error in programs while execution.
SM37 is used to check the job details which are run in background also in foreground. Suppose if you are activating a request in an ODS you can see the job log and can analyze the steps it is going through.
OS06 is Operating system monitor which can contain details like CPU usage, memory usage....
SM66 is used to see the workprocess overview and the for which user job it is engaged.
ST04 is used to check the database statistics which is used as a backend for the SAP system.
SM12 is used to view the lock entries. Sometimes the respective tables get locked due to connection error from the end. And when we try to access the object it gives a message saying that the object is locked by the user. In such a case we can go to SM12 and unlock the object. -
About Tcode SE30 Documents and Info
Hi Experts;
I want to make improvement at my z program.
I'm examine performans my z program using se30 tcode.
But I dont know exactly How is read results?
Are there any documents & Info about SE30?
Best regards.
Moderator message : yes, please read the sticky threads of this forum and search on SCN, e.g. the blogs section.
Edited by: Thomas Zloch on Oct 17, 2011 10:53 AMmy protection system is fine, i hope, but that aside for a
moment...
not all search engines take notice of the robot.txt true..
lets say my file system is like this...
root...
index.php
file1.php
file2.php
docs (folder)
file3.php
file4.php
index.php (dummy file)
what i want to prevent is any search engine from getting to
any files unless they come via the home page, i use a tag system...
?page=1&something=else method
all my pages are fresh and not been viewed other than via the
home page as no one knows what the folder names are for each
section of the site. i.e. one folder maybe called
''somethingreallylongthatnooneknow' only me
all files are inserted into the pages using the 'include()'
method
but still they show up in the search engine after a month or
so.
i would block them but that defeats the object of putting
stuff on the site i want it spidered but not like they are doing,
some search engines i know search others search engines and
somewhere along the line one of them is not taking notice of the
robot.txt file.
also now can they get the folders that i use, all folders are
created new and all have a default index.html file which redirects
them to the 404 error no page found.
how do they get my files? !!!! -
Need explanation about Tcode ABST2
Hi,
Can you explain me how to use Tcode ABST2 and why we use it ?
is it necessary to run this Tcode before closing the Asset book ?
Please clear me on that
Regards.A few suggestions for you:
1) First search the forum. There have been a few discussions about ABST2.
2) Click on field help -- F1 -- it provides a good explanation of ABST2.
It is expected that you search first before posting questions here. -
hi gurus
please explain following T code in the view point of a end user
V_RA BACK ORDER PROCESSING
MB5B STOCK ON POSTING DATE
MB5T DISPLAY STOCK IN TRANSIT
VL10B PURCHASE ORDER FAST DISPLAY
ME2N PURCHASING DOCUMENT PER DOCUMENT NUMBER
regards
Maithrayan
Edited by: Maith rayan on May 7, 2008 10:01 AMHi,
V_RA BACK ORDER PROCESSING - I don'y think back order processing t-codes access will be provided to end users
MB5B STOCK ON POSTING DATE - If you want to see the stockposting of a material with dates, you can view the same through this tcode
MB5T DISPLAY STOCK IN TRANSIT - In the case of STO's if you want to view the stock in transit, you can use MB5T, or MMBE and double click the stock line.
VL10B PURCHASE ORDER FAST DISPLAY - Delivery of purchase orders can be done through VL10B, you can use VL10D also.
ME2N PURCHASING DOCUMENT PER DOCUMENT NUMBER
If you want to see PO's without a GR you can use ME2N
Prase -
Question for BDC about tcode VK12
Hi, everyone, i encounter a problem when i use BDC to transfer data about vk12.
when i usd BDC to transfer value to the field F001,F002, F003 and F004-LOW then click run, the detail record are be chosed and displayed, then i must chose them and click delete. if there is only one record accord to the condition, it is easy to deal with it, but, if there are more than one record, what should i do the deal with the detail records, especially how to deal with it dynamicly acoording to the condition.
for example:
when i enter first condition through BDC .(see the first record)
ZPR0|X||RENT-L1-M03||100001||1000|00|01.01.2008|
the condition value are: zpro, x , rent-l1-m03, 100001,1000, 00 ,01.01.2008 and then i will find only detail record according to this condition, it like this:
RENT-L1-M03
2,000.12
sgd
1
ea
01.01.2008
31.12.9999
then flag this detail record and click delete.it is successful
when i enter second condition through BDC .(see the second record)
ZPR0
X
RENT-L1-M00
100021
1000
00
01.01.2008
the condition value are: zpro, x , rent-l1-m00, 100021,1000, 00 ,01.01.2008 and then i will find three detail records according to this condition, like this:
|RENT-L1-M00|2,000.12|sgd|1|ea|01.01.2008|31.12.9999
|RENT-L1-M00|2,000|sgd|1|ea|01.01.2008|31.12.9999
|RENT-L1-M00|1,000|sgd|1|ea|01.01.2008|31.12.9999
then if i use the same BDC record program to deal with this detail record, it is deal with only one detail record, so what should i do to deal with the others.(because all of them should be flaged and deleted)Just check if you have a Select All button when you select the record you want to delete.
-
About tcode s_alr_87013611
hi, everyone
while executing this tcode iam not getting the statistical posting record
would anyone say at what table the statistical posting will be stored
or
where the report retriving the statistical posting data
thank you
please do the needfulHi,
This report itself is helpful.
But you can try Tcode MB51 with proper movement type / KSB1 .
Check this link also.
Need Report by cost center for material reservation thru order
Thanks. -
Hi Experts,
IN MIGO transaction, we use reference as PO. But in ecc 6.0 there is an option to give Ordering plant as reference.
I have tried to do so, but i couldn't it.
Plz let me what are settings ihave to do?
Regards
PratapThanks Jurgen
As mentioned below, i want to know how it can be done?
Usability enhancements for transaction MIGO for the posting of goods movements
u2022 For goods movements that refer to purchase orders as reference documents (for example, goods receipt, goods issue, subsequent adjustment), user can specify the ordering plant as an additional selection criterion directly next to the purchase order number and the item number.
u2022 There is a new default value: "copy account assignment fields." When entering other goods receipts, user can copy existing account assignment data from the previous item to use as the default values for a new item. To do this, user has to set the copy account assignment fields indicator in the default values.
u2022 User changes the default values in the menu path "Settings -> Default Values."
u2022 Goods movement is monitored with reference to a material document.. When you enter the following goods movements, it is possible to specify a material document, such as the following, as the reference document:
Goods receipt
Goods issue
Transfer posting
Remove from storage
u2022 Note that these material documents must be documents that have arisen from a goods movement without reference ("Others") and that are not reversal documents.
Maybe you are looking for
-
Importing entire project into DTR
Hello All, I need to put my project into DTR. Can i import my entire project into DTR inspite of doing it file by file. Thanks & Regards Abhivyakti
-
Does anybody know why Nokia have stopped providing Signal-Strength and Battery-Status information over bluetooth for the N-series phones? This information gets used on hands-free car-kits which have displays. I have found it very useful. It seems tha
-
SOAP to Proxy error PI 7.1
Hi Experts Working on the SOAP to Proxy scenario, XML message is coming, I am transforming the message from xml into HTML by using the XSLT mapping I receive the following errror while testing, Can anyone tell how to trace the error <?xml version="1
-
I am doing most of my editing on photoshop elements 3, I have noticed my photos, on a shared monitor and printed are darker than what I see on my main imac screen. Is there a way to color/brightness adjust for best results. I am aware of the preferen
-
I am having an issue using InCopy and the macro section. I am a new user to InCopy, and I'm trying to figure out how to: Use a code that means something. For example: AB = $5.00 On my document, I at all times want AB to be there until I tell it to in