Enhancement - Accounting Document from Billing Document - change line items

Hi Experts,
       Our client has a requirement to display all line items(as shown in Billing document) along with the tax line in the Accounting document. I can explain it as below:
      In VF01 transaction code: enter the delivery number.
      Press enter to see the number of line items that will be populated in the Billing document.
      Click on save.
      Here in the Accounting Doc you'll find only 2 line items, one line item is the consolidation of WRBTR and quatity of all the line items in the Billing Document and the other line item is the tax.
      We are required to replace the consolidated line item in the Account Doc with all the actual lines as populated in the Billing Document.
      For this we tried various methods:
             Searched for a BAPI - couldnt find any which will help in modifying the line items before creation of Account Doc
             Checked UserExits - Found one SDVFX008 but it didnt have the table which is sent for population of Accounting doc hence there was no way we could modify any table to get the desired output.
             Searched the VF01 Flow in Debugger to check when the Accounting Doc is updated, but it also didnt yield any fruits.
      Kindly please guide on a way this can be accomplished. Appreciate the help from you all...

Hi
I think that your requirement is related with summarization of items in the FI doc for the billing document. Please, see SAP Note 36353 - AC interface: Summarizing FI documents. See also Note 301077 - User exits for the interface to accounting.
I hope this helps you
Regards
Eduardo

Similar Messages

To change profitcenter in accounting document at line item level

Hi guru's,
I have a requirement that i need to change the profitcenter value in the accounting document based on the G/L number and reference key number when i am releasing the billing document number through vf02.
i tried in many ways but i am unable to achieve this...
Please help me in this regard.
Thanks & Regards
Sastry

Please see [note 1057713|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1057713]
Rob

Cancel down payment Invoice and accounting document without lines item

Dear masters,
I have a problem with down payment invoice cancel. As you know when doing invoice down payment request, after release to accounting, the accounting doc will have special G/L indicator is F (noted item). And when I cancel this billing down payment and after release to accounting, the accounting doc of cancel invoice will not have any lines item. Now I want to have lines item for cancel down payment, how can I do that? I really appreciate your support!
Regards,
Nguyen Pham.

Dear Nguyen,
As i understand your process you created Downpayment Request from SD.
Then created Downpayment with reference to that request.
Then you generated Billing invoice and released to accounts.
After that you cleared the downpayment with the Billing document.
Now you want to cancel all this.
First cancel the downpayment by FBRA reset and reverse.
Then cancel the billing document.

Can we create multiple billing document from delivery with single line item

can we create multiple billing document from delivery with single line item

Hi
Please check the link
[can v create multiple billing document from delivery with single line item]
and as Lakshmi said, check the forum before posting an issue.
Regards
AA

IDoc message Document or line item does not exist for invoice reference

Hello,
We activated IDoc message type FIDCC2. When cancelling documents which were created before the activation date the cancellation documents aren't posted in the receiving system. Message 'Document or line item does not exist for invoice reference' appears. How can I process these items (the reference document can't exist in the receiving system so the only option is to remove it from the IDoc?)?
Regards, Jan

This is just a guide. Adapt it to your situation. I get this kind of error message where in the case, someone has marked for deletion a line item in the purchase order. In this regard, the IDoc errors out because the line item number being referenced is marked for deletion.
You can either delete the IDoc or have the deletion flag taken off the line item number in the PO or document number to enable you reprocess the IDoc number in question.
Elias

Create delivery document for line item 5 only manually

Hi Sap Experts,
We have scenario, we have created sales order with 10 line items while creating delivery we don’t want to show all the 10 line item to delivery creator (creating delivery manually).
We will send him mail saying that create delivery document for line item 5 and we will provide him material number and delivery date and shipping point with sales order number.
We don’t want to use partial delivery option that split the delivery and we don’t want to use VL10C tcode also.
What are options we have and how to customize this scenario?
Kindly suggest.
Regards,
Kotli

Can you be clear in your requirement?
One requirement is user should not select line items other than the one instructed to them
The other requirement is delivery split should happen based on item category
If your requirement is first one, you need to go with user exit USEREXIT_MOVE_FIELD_TO_LIPS in include MV50AFZ1 but I am not sure, on what logic, coding to be included in this exit. If your requirement is second one, then just try in your system and share the outcome how system is functioning. You will come to know how standard SAP works.
G. Lakshmipathi

Table to link FI document number, line item and pricing condition type

Hi,
I am looking for tables to link the FI document number, line item and PO pricing condition type.
Appreciate any help on this.
Thanks.

For any PO in ME23n in which Goods receipt has happened, you can check in the itemdetails->Po history tab in ME23n.
Here you will find the material document number. Just click on the material document, it will take you to anpther screen here you will find a button for FI document.
Click that button for FI document. In PO history istelf you can see the Condition types.
Hope this helps.

Offsetting account in Vendor, Customer and GL line item report

Hi All,
There is one requirement from our client. They want offsetting account in Vendor, Customer and GL line item report.(FBL1n, FBL3n and FBL5n).
As this field is there in selection screen in lay out setting but field coming as blank no off setting account is coming. It was coming in old SAP 4.7 system but same is not coming in ECC6.0.
Kindly let me know if any development is requirement, if yes than which tables we have refer for the same.
Thanks and Regards,
Abhinav Sharma

Hi Abhinav,
There is a SAP not and you can refer to that - SAP OSS note 112312
T.Code: FIBF
After entering in above T.code
Follow Path
Settings  Products of a customer
Product   : XXXX
Text        : XXXX
Active     : Tick it
Click on Back i.e. F3
Follow Path
Settings >P/S Function Modules > of a customer
Event: 00001650
Product: XXXX
Function Module: LINE_ITEMS_GET_GKONT
Now Go to FBL3N display of any account
After opening the account display click on Change Layout i.e. CTRL+ F8
And Select
Offsetting A/C Type & Offsetting A/C no.
Regards,
SAPFICO
Edited by: SAPFICO on Dec 1, 2010 8:26 AM

Vendor Display/Change Line Items

Vendor with Debit balance
Dear Friends:
In FBL1N - Display/Change Line Items, How to indentify vendors with debit balance and How to identify vendors who has to be paid and why are amounts showing with - sign?
Please explain.
Thanks&Regards
MSReddy

Hi,
You can identify the debit balance by checking the amount with positive value. Or you can also select "debit/credit" indicator in the screen layout. when the layout come out, you'll see "H" representing credit and "S" representing debit.
Regarding second question, normally the line item that still need to be paid is identified as "open item" (red color", and the amount that has been paid as "cleared item" (green color).
Even the amount already paid, it will still sign negative, but you can see the "clearing document" number as the payment or clearing document.
Note that, the assumption on the above is that the payment of outstanding vendor is using clearing procedure.
regards,

During F110 run-How to pick profit centre from the Pur.Invoice line item ?

Could anyone please help me with a solution to this problem.
Purchase invoice line items have got profit centre recorded from Material master.
While doing the auto payment run F110, for foreign currency invoices, the exchange rate diff
is posted to a - realised exch rate diff gl a/c.
But there is no cost object attached.
Business wants the system to pick the profit centre from the purchase invoice line item
and put it in the line item record of the exch rate diff account.
Can I do it using OKB9 ? Could someone please explain how to do it.
Thanks

Hi,
With standard SAP this is not possible.may be you have to develop some custom program.
with my experiance,we always post to defualt cost center.
hope this helps you.
Thanks,
Rau

Printing of changed line item in scheduling agreement smart form.

Hi experts,
I am facing problem in printing of changed line item in schedule agreement.
can any body tell me how to find the line item has been changed through programming?what is the procedure to fetch the data for new line item.its
very urgent for me.
Please help me in this regard.
Priti Shrivastava

Hi
with the help of T180-TRTYP field you know if that doc has been changed or created.
If it is not equal to H it is changed. H means created.
pass the TCODE of Sched Agreement and check this field.
You can use the CDHDR and CDPOS table s to get the changed values of new item.
Reward points if useful
Regards
Anji
Message was edited by:
Anji Reddy Vangala

BAPI_PO_CHANGE Changing line Item

Hi All,
My requirement is like this I need to changed line item of a purchase order using BAPI_PO_Change is it required to pass header data other than po Number?I have to change only the Batch Number(POITEM-BATCH) can some body throw some idea on this?
Thanks&Regards
Mahesh

Hi,
   PO number may solve your purpose. Just try filling
   PO number in your BAPI header structure and
   relevent field for your batch number.
Regards
Amole

Account total balance does not equal line item balance

Hi,
I find one account total balance diff with its line item balance? What could be the reason?
Thanks

I have seen this before in an account which was designated as a retained earnings account - prior year rolls into the account are not a posting in the conventional sense.
Hope this helps!
Regards
Louise

Can v create multiple billing document from delivery with single line item

can v create multiple billing document from delivery with single line item

Dear Sandesh
Go to VOV7, select your item category. In this maintain K for Billing Relevance
Now go to VF01, give the delivery number and do not press Enter. Instead click on Selection list on the next screen, select the items you want to bill and click copy and continue if necessary
thanks
G. Lakshmipathi

Line Item Text ( Accounting Doc ) From Billing

Hi Experts,
As i know in Standard process, the Line item text FI Doc ( Accounting Document ) from billing doesn't have any value ( please correct me if i am wrong ).
But in my case there is value in line item text ( billing doc no )
i already check and not found any substistution or userexit, i try to search in customizing but dont have any clue where this text from. please advice where do i have to look.
Thanks,
Ricko

Hello Burak,
Thanks for reply, as i told in the message
right now, there is value in my line item text
it should be blank, but i couldnt find any customizing or anything that cause my line item text filled with billing document number. do you have any idea ?
Thanks,
RIcko
Edited by: Chapii on Mar 19, 2010 5:24 AM

Enhancement - Accounting Document from Billing Document - change line items

Similar Messages

Maybe you are looking for