Enhancement BC Datasource for Master Date - no data for new fields

Hello,
I have a problem. Maybe someone can provide a check list.
I made an enhancement for datasource 0COORDER_ATTR via SAP Exit. The problem is that i do not get data in BW for the new fields but no error occurs. the extractor checker delivers the new data.
the following points i already checked:
- datasource replicated and infosource activated
- "Hide field" and "Field only known in customer exit" are not checked for the new fields

Hi Stefan,
I guess you need to maintain your transfer structure. Edit your transfer rules and click on tab 'datasource/transfer structure'. Move the new fields from the right table (datasource) to the left table (transfer structure). Click on tab transfer rules and map the new field. Activate the transfer rules again.
regards
Siggi

Similar Messages

In material master How to add a new field on Basic data 1 view

Please Help It's very Urgent...
 I have the Requirement that in Material Master a new field reqired to be added on basic data 1 view. This new field should be added just below field Old Material Number( MARA-BISMT).
Can anyone Please suggest the correct way to add the field as per above requirement.
I hope to get quick reply.
Thanks and Regards...
Tanweer Zaki

No need to validate all the other fields is no wear concerened with you, if you have any requirement to validate your field MVKE-LFMAX .
PROCESS BEFORE OUTPUT.
 Verarbeitung vor der Ausgabe
MODULE INIT_SUB.
MODULE GET_DATEN_SUB.
MODULE FELDAUSWAHL.
MODULE SONDERFAUS.
MODULE SONFAUSW_IN_FGRUPPEN.
MODULE FAUSW_BEZEICHNUNGEN.
MODULE FELDHISTORIE.
MODULE BILDSTATUS.
MODULE ZUSREF_VORSCHLAGEN_B.
MODULE REFDATEN_VORSCHLAGEN.
MODULE ZUSREF_VORSCHLAGEN_A.
MODULE SET_DATEN_SUB.
PROCESS AFTER INPUT.
 Verarbeitung nach der Eingabe
MODULE GET_DATEN_SUB.
CHAIN.
 FIELD MVKE-LFMNG.
 FIELD MVKE-AUMNG.
 MODULE MVKE-LFMNG ON CHAIN-REQUEST.
ENDCHAIN.
FIELD MVKE-EFMNG.
FIELD MVKE-SCMNG.
FIELD MVKE-RDPRF.
CHAIN.
 FIELD MVKE-SCHME.
 MODULE MVKE-SCHME.
ENDCHAIN.
CHAIN.
 FIELD MVKE-RDPRF.
 MODULE MVKE-RDPRF.
ENDCHAIN.
CHAIN." to validate your field
 FIELD MVKE-LFMAX.
 MODULE MVKE-LFMAX.
ENDCHAIN.
MODULE SET_DATEN_SUB.
PROCESS ON VALUE-REQUEST.
Selbstprogrammierte Eingabehilfen
FIELD MVKE-SCHME MODULE MEALL_HELP.
FIELD MVKE-RDPRF MODULE MVKE-RDPRF_HELP.
&----
*& Module MVKE-LFMAX INPUT
 text
MODULE MVKE-RDPRF INPUT.
Validate check code
ENDMODULE. " MVKE-LFMAX INPUT
Thanks and Regards,
Pavankumar

Master data extractor -Adding a new field.

All,
I will need to add a new field to the Masterdata extractor (*ATTR). I have the following questions. Please clarify.
R/3 side.
1. I guess I will go SE11 and add this feild to the Extract Structure. Is there any thing else here?
BW side.
2. I will create this newly added field as an attribute. Now I want this to be a Navigational attribute in the cube. So
a) Do I have to delete the data from the cube?
b) How can I populate the history data for the new field?
Thanks,
Ajay.

Hi,
If the field is already available in the extract structure,
i think we change the properties of the field in table ROOSFIELD,
https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action&pageid=12607
to make it available for extraction.
Kedar can you please suggest?
Regards,
Raj.

Error while creating Data Source for master data attributes

Hi BI Experts,
Well its been some time for me that I have been part of Extraction in BI.I primarily handled reporting in my last assignments.
I was trying extraction with flat files in SAP BI 7(new to sap bi 7 but very much familiar with BW3.5) but failed in the activity during master data attributes and text upload in infoobject (say IOSP_Mat).
Here is the procedure that I did after creation of characteristic IOSP_Mat.I created a source system for flat file followed by data source for Master data attributes, i selected all the parameters correctly.i.e. csv file format, data seperator as ,
and other settings, now when i am trying to look at the proposed data in the next tab using Load example data.its not showing the desired result.The columns that I have maintained in Flat File is MAT_NUMBER and MAT_NAME (with say 100 data in the file)
same is the result when I am trying to load the text data too columns maintained are
(LANGUAGE MAT_NUMBER Short Description)(same 100 data).
now i used to rsa1old transaction to upload the file using 3.5 version.i created info source for master data/text/hierarchies for IOSP_Mat
now when trying to upload it using info package for master and text data,I observe its(the data) not maintained in the characteristic IOSP_Mat.
When I monitored ,I figured the data has not been even uploaded to the PSA level.
Can you BI experts tell me the answer for this.
Thanks,
Srijith

apologies to all of you for late response,
was busy with some other activities.
I don't remember the exact message,but I remember it was not loaded to even the PSA level.I will try it again and post the exact message.
Thanks again for your quick response.
Once again sorry to all of you for my late response
Thanks,
Sri

How to use ale/idocs in sap crm to transfer master and transactional data

hi all,
I am working on sap crm7.0 ehp1. I want to transfer my master and transactional data from crm development system to crm quality system here through idocs. I am aware of basic ale settings and successfully transfe the ztable data through idocs. But i am not able to find any proper step by step procedure for maste and transactional data in sap crm. Also sap ecc tcode NACE is not available here.
pls help..
regards,
kavita chaudhary

Kavita,
In CRM, Exchange Interface (XIF) ALE/IDOC is available to transfer master and transaction data. You can go through the following link for set up.
Basic Data exchange set up for ALE IDocs - Wiki - SCN Wiki
You can extend the standard XIF IDOCs using Transaction BDFg as well.
Thanks,
Ravi

EXIT_SAPLVEDA_001 for transferring Sales order data

Hello, i have enhanced tables VBAK and VBAP for containing Z* fields. The field and the value will be transferred in the idoc ORDERS05 segment E1EDK35.
at header level:
E1EDK35-CUSADD will contain the name of the field(e.g ZFIELD)
E1EDK35-CUSADD_BEZ will contain the value of the fields (e.g 500)..
at item level
E1EDP01 -> E1EDP35-CUSADD will contain the name of the field(e.g ZFIELD)
                    E1EDP35-CUSADD_BEZ will contain the value of the fields (e.g 100).
I have to use the EXIT_SAPLVEDA_001 for transferring the values of the new fields.
Which logic should i apply so that the data gets transferred to VBAK/VBAP.
So far for header data:
IF SEGMENT-SEGNAM = 'E1EDK35'.
S_VBAK = SEGMENT-SDATA.
IF S_VBAK-CUSADD = 'ZFIELD1'.
   DXVBAK-ZFIELD1 = S_VBAK-CUSADD_BEZ.
ENDIF.

Hello, i have enhanced tables VBAK and VBAP for containing Z* fields. The field and the value will be transferred in the idoc ORDERS05 segment E1EDK35.
at header level:
E1EDK35-CUSADD will contain the name of the field(e.g ZFIELD)
E1EDK35-CUSADD_BEZ will contain the value of the fields (e.g 500)..
at item level
E1EDP01 -> E1EDP35-CUSADD will contain the name of the field(e.g ZFIELD)
                    E1EDP35-CUSADD_BEZ will contain the value of the fields (e.g 100).
I have to use the EXIT_SAPLVEDA_001 for transferring the values of the new fields.
Which logic should i apply so that the data gets transferred to VBAK/VBAP.
So far for header data:
IF SEGMENT-SEGNAM = 'E1EDK35'.
S_VBAK = SEGMENT-SDATA.
IF S_VBAK-CUSADD = 'ZFIELD1'.
   DXVBAK-ZFIELD1 = S_VBAK-CUSADD_BEZ.
ENDIF.

Add new fields in Additional data tab B in Inquiry,

HI,
I want to add additional new fields in inquiry on the addition tab -B, like
Architect Name
Contractor name
followed By
referenced by like this, and want to capture the report on these fields
plz guide
thanks in advace

Dear Rishi,
Please Don't post multiple threads for same issue(i.e Add new fields in Additional data tab B in Inquiry).
Try with these User Exits,
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
I hope this will help you,
Regards,
Murali.

Data vanishing in new fields after request activation in ODS

Hi,
I have added some new fields in ODS and updated it by end routine .Now when i run the dtp and check the data by pressing NEW DATA tab then i am able to see data updated in the new fields.
When i tried to activate that request in ODS ,the values that i populated in new fields got vansihed .I am not able to find wats d issue after activation even though before activating request in ODS all data is perfectly updated in new data table.
Regards,
Montz

I have faced the same issue.Data was coming till new table,but after activation fields were getting
blank.
There is no necessity for doing a dummy mapping. In the transformation screen you will be having an ikon near to the delete
routine symbol with an arrow symbol
similar to select all and unselect all, just clikc on it and then mention the setting as Update all the target fields need to be populated.
This will solve the issue, if it is not solved, then you can make a direct mapping to any of the field in the source, it need not be the
exact field in the target.
Thanks,
Saveen Kumar

New fields added on Bidder data does not appear in Business Partner

Hi,
I have added two new fields in Bidder data tab of Maintain Business Partner screen.
When there are only three tabs viewable i.e Company data , Bidder data , Registration data tabs, the added new fields does not appear.On approved suppliers (vendors) there will be a also tabs for vendor and supplier classification(customised). But for companies that are only approved as bidders, there may be only the 3 tabs showing.
Please help.
Regards,
S. K.

Hi Jay,
Yes i have used EEWB to add new fields. But i have used badi's BBP_BUPA_GET_CUF and BBP_CUF_BADI_2 to display those fields on Bidder data tab.
When business partner is approved bidder that time i am not able to view these new fields, but when business partner is approved vendor that i can view those fields.
We are using SRM 5.5.
Regards,
S K.

Enhancing 0SRM_TD_PO in SRM system - new field NOT in RSA6

I've enhanced a DataSource by creating an append structure, adding a field to the append structure (no errors or warnings, everything is active), but then when I go back into RSA6 to edit the DataSource, the field is NOT available in the list - meaning it does NOT appear available to uncheck the "Hide" box.
When I go out and display the DataSource, the field isn't there either. I can even double-click on my extract structure BBPS_BI_TD_PO and see the field there actively available in the append structure at the bottom. Why doesn't it appear in the field list in RSA6?
I don't recall seeing this happen before and wonder if it means that this DataSource (0SRM_TD_PO) can't be enhanced or something? Any ideas?
Thanks!
Chris

Hi,
Have you extracted data at RSA3 for your data source?
if not then please check and let us know.
if you won't get at ra3 also then check the data at bases tables of data source.
if data exists at base tables and not pulled then need to check deeper about settings.
Thanks

How to create a new field in a sub screen in material master. ?

How to create a new field in a sub screen in material master. ?
Kindly help us.
LIke wise tell me how to create a new sub screen as per my desired

Follow the documentation of Logistics - General->Material Master->Configuring the Material Master->Create Program for Customized Subscreens to add the new field in material master.
Create Program for Customized Subscreens
In this IMG activity, you can create a function group of your own by copying function group MGD1 (for industry) or function group MGD2 (for retail). The subscreens are not copied, except for two subscreens which are copied for technical reasons. You can use this copy to create subscreens of your own which you can assign to a data screen in the activity Define Structure of Data Screens for Each Screen Sequence.
Requirements
Be sure to read the program documentation first.
Activities
1. Create a function group of your own by choosing Execute.
2. Enter a name containing up to 25 characters, beginning with the letter Y or Z, and choose Save.
3. Access the Object Navigator.
You do this from the SAP standard menu by choosing Tools -> ABAP Workbench, and then Object Navigator.
4. Display either program SAPLMGD1 (industry) or SAPLMGD2 (retail) as required.
5. Copy the subscreens as required, ensuring that they already contain as many as possible of the field names you want to use in your function group. You do this as follows:
a) Choose Screens, position the cursor on the corresponding subscreen, and choose Copy in the context menu.
b) Enter the program to which you want to copy the subscreen, prefixing it with SAPL, and enter a screen number. Use the screen number of the original subscreen where possible. If the F1 help is specific to a particular subscreen, this ensures that this context-specific help continues to be displayed.
Example
You have called your function group YENTERPRISE, to which you want to copy subscreen SAPLMGD1 2301. Enter SAPLYENTERPRISE as the program to which the subscreen is to be copied, and enter (preferably) 2301 as the screen number.
6. Return to the initial screen of the Object Navigator and display your program. In the example above, you would enter SAPLYENTERPRISE.
7. Choose Update object list.
8. Select the subscreen you have copied and activate it by choosing Activate in the context menu.
Using the Screen Painter, you can remove fields you do not require on the subscreen or include additional fields from other subscreens (see the ABAP Dictionary). For information on the Screen Painter, see the SAP library documentation BC ABAP Workbench Tools.
Points to consider when removing or adding fields
Make sure that a field statement exists for each field on the subscreen since data may not otherwise be transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
For the fields you have added, include any check modules and modules for self-programmed F4 help that are called up for these fields on the original subscreen. You can do this by displaying the flow logic for the original subscreen and searching for such modules. They normally have the same names as the fields themselves. When you find a module, copy the corresponding module call to your subscreen.
If you change the order in which fields are transported that are checked together in the flow logic (such as the safety stock and minimum safety stock), you must deactivate the check module for the first field and activate it for the second. The system would otherwise transport the first field, and carry out the check before the second field is transported.
Any error messages that fields are unknown when activating the subscreen are due to the fields still being included in checks, even though you have removed the fields from the subscreen. Search for the fields in the source code and make the lines in which they appear comment lines. Then reactivate the screen.
9. Assign the subscreen to a data screen as required.
Note on transport
Use the Workbench Organizer to transport the copy you have created.
Proceed

New field (Customer group 5) to be added to the Catalog for Pricing.

Hello friends,
For the creation of a new Condition table, I require the field, KNVV-KVGR5 i.e Customer group 5 field present in Sales area data ->Extras -> Additional data in Customer master to be added to the Catalog of allowed fields since this field does not exist anywhere.
I have already gone thru the threads available on adding New field for Pricing which has an example/detailed explanation with the Item category (PSTYVV) field.
But the field I want i.e KNVV-KVGR5, is a part of Master data, so please guide me with the steps to follow to add this field in the field catalog and hence use it for creation of a new condition table.
1) Should i add this field in KOMP (i.e item) or KOMK ( i.e Header) or KOMG?
2) Should i include it in KOMKAZ or KOMPAZ?
3) Should i create this field as data element or structure and what should be the domain used?
4) For the value flow, should i use the Item -level user-exits or Header level mentioned in other threads?
Please guide for the same urgently.

Dear Friends,
I was finally able to create a new field for Cust.grp.5 i.e ZZKVGR5 and added to Catalog to be used for Pricing.
Then i faced a peculiar issue as below:
For the business requirement, we defined a new tax condition table for determination of tax rates. For this, we are using both standard and custom fields to derive the correct tax rates in sales/billing documents like below
A859: Country/Distr. Chl/Cust.grp.5/Material (Here Customer.grp 5 was added following the SAP Note: 531835)
The field was inserted in the communication structure KOMKAZ which is included in both KOMK and KOMP.
During the document processing, the pricing analysis view shows no value in the customer grp 5 field, though it is maintained for the customer used in the sales order. The code has been written in MV45 and RV60 both as guided in SAP Note: 531835. But the values are not flowing.
Solved the above problem as below:
M posting the answer to help the community for similar issue.
Also, the new field tat i had added was Customer Grp 5 field of Customer master ->Extras->Additional field and I wanted the value to flow in the ZZKVGR5 field before the Pricing for the sales order was called.
After trying all, we have finally fetched the value from KNVV-KVGR5 and got it moved to ZZKVGR5 field through ABAP coding.
After this when i select/click on Pricing for a particular item, it gets picked up correctly and properly.
Thanks to everyone for their valuable guidance and help.
Regards to all.

Cutover approach - new fields added to existing DataSources / DSOs / Cubes

My current project has been phased across multiple releases. The phase 1 go-live was a few months ago and there is already a reasonable amount of data in the production environment. We will soon cutover from our QA to production environment. Some of our developments involve the addition of new fields (not key fields) to datasources.
For existing delta-enabled DataSource we are going to adopt the following approach:
1- Source system transports deployed
2- DataSources replicated in BI system
3- Before InfoObject / InfoProvider transports are sent we will delete data
4- The INIT flag will be deleted
5- Full Repair loads will be executed
6- INIT without Data Transfer will be executed
For new delta-enabled DataSources we are going to:
1- Source system transports deployed
2- DataSources replicated in BI system
3- INIT loads executed
4- DELTA loads executed
Does this approach seem correct? Does this avoid the risk of losing any data? Will it lead to delta loads functioning correctly? Will we get data loaded in the new fields for existing records?

One approach that we used for getting around having to delete and re-fill setup tables (which, by the way can be done without downtime - I wrote a blog on that about 1 year or more ago), is to create generic DataSources (some with generic deltas) for the additional data, ensuring that we had the keys for the target InfoProviders in the DataSource and then used those as an additional transformed source to the InfoProviders.
Example:
Was
2LIS_XX_XXX -> 0XX_DSXX
Now
2LIS_XX_XXX \
> 0XX_DSXX (with appended columns)
ZLIS_XX_XXX /
Edited by: Dennis Scoville on Oct 13, 2010 10:28 AM

Function Module Call Via CMOD Logic for Master Data Enhancement

Hi Friends Please help me to resolve this, would really be very kind of all of you.
Requirement. I want to Enhance the field ZFACTREG from VIBDBE table in my datasource 0busentity_attr extract structure l_s_REIS_BUSENTITY_ATTR, I want to create the logic in CMOD exit_saplrsap_002 to call my function module for enhancement of master data. Please help me Step by Step
Thanks
Poonam Roy
Step #1
I put this code which gives me error in CMOD like this
ERROR : Das formale Argument 'OTHERS' muss am Schluss der Ausnahmeliste stehen.
ABAP Code#1 IN exit_saplrsap_002
DATA: l_d_fmname(30) TYPE c.
CONCATENATE 'Z_DS_' i_datasource(25) INTO l_d_fmname.
TRY.
CALL FUNCTION l_d_fmname
EXPORTING
I_DATASOURCE = I_DATASOURCE
I_UPDMODE = I_UPDMODE
TABLES
I_T_SELECT = I_T_SELECT
I_T_FIELDS = I_T_FIELDS
I_T_DATA = I_T_DATA
C_T_MESSAGES = C_T_MESSAGES
EXCEPTIONS
RSAP_CUSTOMER_EXIT_ERROR = 1
OTHERS = 2
IF FOUND.
IF SY-SUBRC <> 0.
RASIE RSAP_CUSTOMER_EXIT_ERROR.
END IF
CATCH CX_SY_DYN_CALL_ILLEGAL_FUNC.
ENDTRY.
Step#2
I simple created the Function module Z_DS_BUSINESS
and put the code in source code which gives me error . what should i put in other tabs like"Import", Export", Tables" i kept blank
ABAP CODE give me error : The Dictionary structure or table "FIELD-SYMBOLS" is either not active. i have to remove include in the FM. WHY SO??
FUNCTION Z_DS_BUSINENSS
""Lokale Schnittstelle:
*" IMPORTING
*" VALUE(I_DATASOURCE) TYPE RSAOT_OLTPSOURCE
*" VALUE(I_CHABASNM) TYPE SBIWA_S_INTERFACE-CHABASNM
*" VALUE(I_UPDMODE) TYPE SBIWA_S_INTERFACE-UPDMODE
*" TABLES
*" I_T_SELECT TYPE SBIWA_T_SELECT
*" I_T_FIELDS TYPE SBIWA_T_FIELDS
*" I_T_DATA
*" C_T_MESSAGES STRUCTURE BALMI OPTIONAL
*" EXCEPTIONS
*" RSAP_CUSTOMER_EXIT_ERROR
INCLUDE ZXRSAU02.
WRITE: / 'INSIDE THE Z_DS_MEASUREMENTS PROGRAM'.
TABLES: REIS_BUSENTITY_ATTR,
 VIBDBE,
field-symbols:.<fs_REIS_BUSENTITY_ATTR> like REIS_BUSENTITY_ATTR.
DATA: BEGIN OF i_c_t_data OCCURS 0.
 include structure REIS_BUSENTITY_ATTR.
DATA END OF i_c_t_data.
DATA: i_c_t_data_copy like i_c_t_data OCCURS 0 WITH HEADER LINE,
 begin of i_vibdbe occurs 0,
 INTRENO like vibdbe-INTRENO,
 ZFACTREG like vibdbe-ZFACTREG,
 end of i_vibdbe.
i_c_t_data_copy[] = i_c_t_data[] = c_t_data[].
sort i_c_t_data_copy by vibdbe.
Select INTRENO
 into table i_VIBDBE from VIBDBE
 for all entries in i_c_t_data_copy
 where INTRENO = i_c_t_data_copy- INTRENO.
if sy-subrc = 0.
sort i_VIBDBE by INTRENO.
loop at i_c_t_data assigning <fs_REIS_BUSENTITY_ATTR>.
 clear: i_VIBDBE.
 read table i_VIBDBE with key INTRENO = <fs_REIS_BUSENTITY_ATTR>-INTRENO
 BINARY SEARCH
 transporting ZFACTREG .
 if sy-subrc = 0.
 <fs_REIS_BUSENTITY_ATTR>-ZZFACTORY = i_vibebe-ZFACTREG
 endif.
null

(I leave office until Monday morning, Europe time)
in include from customer-exit ZXRSAU01, etc.
CASE I_DATASOURCE.
WHEN '0CUSTOMER_ATTR'.
 PERFORM 0customer_attr changing i_t_data...
ENDCASE.
In each perform, doing what you wrote ; select (needed fields) from complementary-database-table into an internal table with a for all entries. sort the table. LOOP and MODIFY on i_t_data.
In some case i had to insert lines of i_t_data to an internal table of DS_structure when entering subroutine and back at exit. (on 4.6C PI 2003 if i remember)
Some optimization done when reading small tables (T001 society and the same, these are filled once and not for each packet of data.
Your idea of creating different FM is of interest, but the cost of passing i_t_data between two programs (two function groups) may overcome the gain of performance. In a job only one DataSource is processed so only one routine is actually called.
Regards.

Error in creating RSDS using transfer rules for master data datasources

Hi ,
when i am creating the transfermations(RSDS) using transfer rules for master data datasources while i want to migrate datasource.it is giving the error message saying that INITIAL ERROR OCCURED DURING GENERATION OF THE TRANSFERMATION.AND in the taskbar it is giving the message LOG IS BEING LOADED.
MY QUESTION IS HOW CAN WE SEE THE LOG? AND
PLEASE GIVE ME THE STEPS TO MIGRATE MASTER DATASOURCES.
THANKS IN ADVANCE .

Hi Ankit,
Yoy have to load data to the cube.For that you need update rules.
Steps to load data to the cube
1.Replicate the datasource.
2.Assign Infosource
3.Create transfer rules
4.Maintain the update rules to the cube.
5.Right click on the datasource and schedule an infopackage for it.
Execute the Infopackage and pull the data to the cube.
Hope this helps
Regards
Karthik

Enhancement BC Datasource for Master Date - no data for new fields

Similar Messages

Maybe you are looking for