ENHANCEMENT FOR CO01 BLACK FLUSH

Dear All,
My requirement is When a production order is created and released goods issue has to done automatically. Normally We ll conform the production order in Co011n there it ll generate GI and GR automatically but i want to generate my GI when a production order is released.
Is there and exits and what about PPCO0005.
or i can create a push button through exits and by clicking it GI should generate i.e. it should call tcode MIGO or MB31 but here how to catch the Prd. Ord. number in CO01 and for that Prd. Ord. number GI should generate.
Thanks & Regards,
Arun.

Hi,
Check Function Exit EXIT_SAPLCOZV_001,
Check Enhancements
PPCO0001 : Application development PP orders
PPCO0005 Backflushing when order is created
PPCO0006
PPCO0007 Exit when savon PO
PPCO0023
Edited by: Neenu Jose on Nov 28, 2008 10:47 AM
Edited by: Neenu Jose on Nov 28, 2008 10:50 AM

Similar Messages

Enhancement for CO01/02

Dear Expert ,
I am trying to gray out tolerance box in CO01 and CO02 from goods receipt tab ....
kindly tell me which user exit or badi can be used for this enhancement.
Thanking you very much ...
Regards
Alok

Hi,
I suppose, there is User exit or BADI for that. Try to create Transaction variant: created in SHD0.
Thanks,
Shailaja Ainala,

Enhancement for CO01 Tx while creating order

Hii,
While creating an order from CO01 Tx code system should not allow the user to save the order if that material doesnt have any BOM. I found the exit PPCO0007.Is there any other exit to check it???
Regards,
venkat

Found the function exit to restrict the user from saving order when header material doesnt have any BOM.
EXIT_SAPLCOZV_001.
Regards,
Venkat.

Enhancement for Production Order Release and Batch Fixing.

Hi Experts,
I have assigned a enhancement for production order.The user exit is also given in the req as PPCO0001 through which i have to call a Z-Program for Batch fixing using Trans CO01 and release the order before saving once it is assigned to components.
Now my probs is where to start working for the enhancement -is it possible to use any BAPI instead of Batch (BDC) or I can use any BADI instead User Exit.
So if you guys have similar scenario worked on it or have similar example approach to solve it.Please do help.I will reward for all helpful answers.

I figured out thr friends !
Thanks,
SriRam

Suggest EnhanceMent For SALES area determination In stock Transfer.

Suggest EnhanceMent For SALES area determination In stock Transfer.
V02V0001 Sales area determination for stock transport order Doesnt Work,

Is user exit required, as the sales area will be different. Incase of Intra company stock transfer the process will be as under:
Create Purchase Order (ME21N)
Create Delivery in background (VL04, VL10a, VL10C, etc)
Change Delivery for picking / packing & PGI (VL02n)
Create Billing Document (VF01)
Assumption: Stock Transfer configuration is in place. Assistance can be taken from SAP Best Practices in help.sap.com
Incase of Inter-company, the process will be as under:
Create Sales Order (VA01)
Create Delivery (VL01N, etc)
Change Delivery (VL02N)
Create Billing Document (VF01)
Assumption: Configuration is in place. Assistance can be taken from SAP Best Practices in help.sap.com
Regards,
Rajesh Banka

How to print a selection of pages from a 3000 page PDF without having to scroll two wheels! Also is there a way to set printer options for just black and white? Seems like there is a lot missing here?

I have been using this for school work as much as possible and have come across a problem. With my lack of knowledge for apple it seems as though I can't navigate myself to a easy answer. The problem hits when I am printing pages off of a large document, and I don't want to print the entire document in color but I have no way "that I can find" for a black and white print option...
----- also a larger issue, when printing I need to select 1 page or even 20 pages... The time it takes to use a scroll wheel and the fact if you try and scroll fast sometimes you click off the screen then you have to start scrolling all over again... It seems like you would beagle to input from say page 1224 to 1236.... Instead I have a scroll a wheel? Just doesn't make sense...?
Can someone please help solve this for me!

Yes, that fixed it, thanks! I had no idea they clashed like that. I ruthlessly purged all other tables of contents, and then used Layout > Table of Contents to create a new one, and it worked.
It made more sense after seeing in this thread that table of contents styles are more like presets or entities than styles.

Badi / Exit / Enhancement for replacing INSMK during PO creation

Hi Gurus,
we want to default the INSMK field (stock type) during Purchase Order creation..
Can someone help me findind the right BAdI / exit / enhancement for it?
Thanks in advance,
Regards,
Alessio

Hi Alessio,
You may check these first:
Re: Negative postings to MVER table
Re: select stock type
Thanks,
Gordon

I need the drivers of EDR Enhanced for LabVIEW 8.6 or more, please.

Hello, I want to acquire a signal with the microDAQ-Lite of EAGLE Technology and I need the EDR Enhanced LabView Driver. The one I have is for labview 6.x or 7. Currently I am working in Labview 2010 so I am needing the drivers for this version. I have found in a webpage (http://edr-enhanced-for-labview.software.informer.com/8.5/ ) that a version developed by National Instruments for version 8.5 exists, it says it is free, but i cant find it. Does anyone knows if a newer version exist? or where can I find the latest one?? Please help.
Thanks in advance.
Alejandra

NI does not develop drivers for third-party DAQ devices. Contact the vendor or use the driver you have. You can load version 6 and 7 into LabVIEW 2010.

Implicit enhancement for report painter reports(For GRR3 and CJE3)

Hi,
We have a client requirement to add 5 fields (In selection screen) to report painter reports ( Reports of CJE3 and GRR3 ).We created Z reports as a copy of standard reports, added required 5 fields by implementing SAP notes and other settings.We have also done implicit enhancement for all these reports to make change in the behaviour of new fields.This is working fine in the development client but the problem is once we transport this to other client new reports get generated( With new name ) and implicit enhancement will be lost.
For eg:in development client for CJE1/CJE2 report the program name will be "GPAVPSATWFP4NN0YRDBIQBHI8MQ"
but when we transport it to other client new program "GP8O1UCNZTJYY5LTO8GN0UW2GQB" is generated in which implicit enhancements are not found.
Can you please suggest how to handle implicit enhancement in such cases? Or what is the correct way to transport it.
Thanks in advance
Regards,
Shekhar

Hi,
Thanks for the quick reply..
I have already done implicit enhancement as you said ,my problem is to transport it to another client.
I have implemented implicit enhancement for one report lets say it as "ABC", and i transport it to another client with all the enhancement. But in another client new program "XYZ" is getting generated for same report( dynamic programs ), so my implicit enhancement is present but its applicable to "ABC" program but not for "XYZ".
Can you please suggest how can i handle this??
thanks in advance,
Greeshma.
Edited by: Accgreeshma on Jan 23, 2012 3:04 PM

Implicit enhancement for report painter (CJE2 & GRR3 reports)

Hi,
We have a client requirement to add 5 fields (In selection screen) to report painter reports ( Reports of CJE3 and GRR3 ).We created Z reports as a copy of standard reports, added required 5 fields by implementing SAP notes and other settings.We have also done implicit enhancement for all these reports to make change in the behaviour of new fields.This is working fine in the development client but the problem is once we transport this to other client new reports get generated( With new name ) and implicit enhancement will be lost.
For eg:in development client for CJE1/CJE2 report the program name will be "GPAVPSATWFP4NN0YRDBIQBHI8MQ"
but when we transport it to other client new program "GP8O1UCNZTJYY5LTO8GN0UW2GQB" is generated in which implicit enhancements are not found.
Can you please suggest how to handle implicit enhancement in such cases? Or what is the correct way to transport it.
Thanks in advance
Greeshma.

Hi,
Thanks for the quick reply..
I have already done implicit enhancement as you said ,my problem is to transport it to another client.
I have implemented implicit enhancement for one report lets say it as "ABC", and i transport it to another client with all the enhancement. But in another client new program "XYZ" is getting generated for same report( dynamic programs ), so my implicit enhancement is present but its applicable to "ABC" program but not for "XYZ".
Can you please suggest how can i handle this??
thanks in advance,
Greeshma.
Edited by: Accgreeshma on Jan 23, 2012 3:04 PM

Enhancement for F110

hi,
Can u please specify the particular enhancement which triggers between payment proposal and payment run.
Requirement:
I need to capture the username who performs the payment proposal and check with the same whether the same user is running the payment run....
Rgds.,
subash

FDTAX001 Enhancement to Transaction FDTA (event after the downlo
FEDI0002 Function exits for EDI DOCS in FI - Incoming pyt adv.no
FEDI0003 Function exits for EDI docs in FI - Save PEXR segments
FEDI0004 Function exits for EDI docs in FI - particular events
FEDI0006 Function Exits for EDI-docs in FI: Save IDCR Segments
RFFOX003 Frame for user exit RFFOX003 (in program RFFOM100)
RFFOX041 Framework for user exit RFFOX041 (in program RFFOBE_I)
RFFOX042 Framework for user exit RFFOX042 (in program RFFOBE_E)
RFFOX043 Framework for user exit RFFOX043 (in program RFFOBE_D)
RFFOX061 Frame for user exit RFFOX061 (in program RFFOCH_P)
RFFOX062 Frame for user exit RFFOX062 (in program RFFOCH_P)
RFFOX063 Frame for user exit RFFOX063 (in program RFFOCH_P)
RFFOX064 Frame for user exit RFFOX064 (in program RFFOCH_P)
RFFOX065 Frame for user exit RFFOX065 (in program RFFOCH_P)
RFFOX066 Frame for user exit RFFOX066 (in program RFFOCH_P)
RFFOX071 Frame for user exit RFFOX071 (in program RFFOCH_U)
RFFOX072 Frame for user exit RFFOX072 (in program RFFOCH_U)
RFFOX073 Frame for user exit RFFOX073 (in program RFFOCH_U)
RFFOX074 Frame for user exit RFFOX074 (in program RFFOCH_U)
RFFOX075 Frame for user exit RFFOX075 (in program RFFOCH_U)
RFFOX081 Frame for user exit RFFOX081 (in program RFFOF__T)
RFFOX082 Frame for user exit RFFOX082 (in program RFFOF__T)
RFFOX100 Frame for user exit RFFOX100 (in program RFFOUS_T)
RFFOX101 Frame for user exit RFFOX101 (in program RFFOUS_T)
RFFOX102 Frame for user exit RFFOX102 (in program RFFOUS_T)
RFFOX103 Frame for user exit RFFOX103 (in program RFFOUS_T)
RFFOX104 user exit
RFFOX105 Frame for user exit RFFOX105 (in program RFFOUS_T)
RFFOX200 Frame for user exit RFFOX200 (in program RFFONZ_T)
RFFOX210 Frame for user exit RFFOX210 (in program RFFOAU_T)
RFFOX211 Frame for user exit RFFOX211 (in program RFFONZ_T)
RFFOX230 General program for user exit RFFOX230 (in program RFFO
RFFOX240 Enhancement for User Exit 240 (RFFOAT_P)
RFFOX250 Enhancement for User Exit 250 (RFFODK_E)
RFFOX901 Framework for user exit RFFOX901 (in program RFFOM100)
RFFOX902 Framework for user exit RFFOX902 (in program RFFOM100)

F-48- Downpayement related to downpayment request and enhancements for PO

Hi to all,
Is there anyone that can explain me why in F-48 transaction, when I make a downpayment related to downpayment request, in the subsequent screen the fields are filled with the value retrieve from previous screen ( in which I selected the downpayent request related to DP I'm posting) all fields except the purchase order field that remains NOT filled ("space" ). So it should be filled by the user. I was asked to find a substitution in order to make this field automatically filled with the correct value without the user needs to fill it manually . The problem is that purchase order field seems to be related to another field called LPN (Long Procuerement Number ). Anyone can suggest a suitable enhancement for substitution ?
Thanks in advance...
Andrew

Thanks Tejas sir, AND VV sir,
Sri Problem resolved. But sir, we want while F-47 payment request special GL Indicator A in both case in F-48 too.. spl GL Indicator A only. while doing the same thing getting error.. see the error Below.
Special G/L indicator A is not defined for down payments
Message no. F5053
Diagnosis
The specified special G/L indicator is not classified as "down payment" or not listed in the list of the target special G/L indicators for indicator "F".
System Response
The entry is not accepted.
Procedure
Enter an allowed special G/L indicator or initiate a change of the default settings.
Kindly help me sir.
Thanks
Pranav Kr. Gupta
Note: i will give u the point. as well sir.

Have been here before but still have not resolved a fix for a black screen when I try to access a PDF file...Now I've got a new iPad and need the User Guide which is only available inPDF

Have been here before but still have not resolved a fix for a black screen when I try to access a PDF file using Safari...Now I've got a new iPad and need the User Guide which is only available in PDF and FireFox will not work.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Question about "Enhanced for loop"

public class NewLoopTest{
     public NewLoopTest(){
          int result=0;
          int[] a=new int[20];
          for(int i=0;i<a.length;i++){
               a=i++;
          for(int i:a){
System.out.println("i="+i+";"+"a["+i+"]="+a[i]+";result="+result+"+"+i+"="+(result+i));
               result+=i;
          System.out.println("-------------");
          result=0;
          for(int i=0;i<a.length;i++){
               System.out.println("i="+i+";"+"a["+i+"]="+a[i]+";result="+result+"+"+i+"="+(result+i));
               result+=i;
This code counts sum of the elements of a array.
At first I use the enhanced for loop and at second I use the traditional for.
Enhanced for loop in sdk1.5 returns only even elements of array, am I right?

Enhanced for loop in sdk1.5 returns only even
elements of array, am I right?No. It covers them all.
The i in the enhanced for loop is not the index. It's the element at the current index. You don't have access to the index in the new loop because you don't need it.
for (int item : arr) {
    System.out.println(item);
// is equivalent to
for (int ix = 0; ix < arr.length; ix++) {
    int item = aa[ix];
    System.out.println(item);
}The i in your new loop is the same as a [ i ] in the old loop.

Documentation Enhancer for Java

Documentation Enhancer for Java is a tool that enhances Javadoc files by enriching them with new information. The information is gathered by statically analyzing the corresponding Java class files. This tool enhances the Javadoc HTMLs in three respects: semantic information, sorting, and navigability.
http://www.alphaworks.ibm.com/tech/docenhancer?open&S_PKG=&S_TACT=103AMW61&S_CMP=GR&ca=dgr-awjw03docenhancer

First of all, can you explain what do you exactly mean by "is there a java api for java?"
About the second part of your question, if the desired file format is CSV, then you can use StringTokenizer class that by reading each line of your file, makes tokens based on some delimiter that you specify (space, tab, etc.) and then in each line, you have to concatenate each pair of tokens with a character ";" between them. However as I know, you cannot have text decoration (Bold, Italic, etc) with CSV format

ENHANCEMENT FOR CO01 BLACK FLUSH

Similar Messages

Maybe you are looking for