Enhancement for CO01 Tx while creating order

Hii,
While creating an order from CO01 Tx code system should not allow the user to save the order if that material doesnt have any BOM. I found the exit PPCO0007.Is there any other exit to check it???
Regards,
venkat

Found the function exit to restrict the user from saving order when header material doesnt have any BOM.
EXIT_SAPLCOZV_001.
Regards,
Venkat.

Similar Messages

  • Message for Missing Parts  While Creating Order

    Dear Friends,
    While Creating & Saving The Production Order System Is Not Supporting In Giving A Warning Massage On Missing Parts In spite Of Deficit In Storage Location For Materials.
    The Clint Requires A Warning Massage In Case Of Materials Shortage In SL
    I Tried To Get This From the Following Method
    Checked For Define checking control In OPJK.
    Selected  plant, Order type & selected the business function 1 for create or 2 for release. And Maintained These Settings
    a)     Removed tick mark in No Availability check.
    b)     Type of component check Given as - ATP check.
    c)      Material release - 1. User decides on release if parts are missing.
    d)     PP  Checking rule (Which Is same As with plant parameter OPPQ)
    e)     In Define scope of check (OPJJ) made a tick mark in check w/o RLT.
    Then Assigned the availability checking group at Mrp View of Header material.
    In spite Of All These Settings Still At The Time Of Order Release/Save  A  Warning Massage Or A Informative Massage Is Not Appearing
    Please Suggestu2026u2026u2026u2026
    Hari

    Dear Friends,
    I Did The Following Settings
    A) Define Checking control       02               Individual Req
                        Total Sales          Single Record
                        Total Div Rec               Single Record
    B)Define Checking Rule     PP  Check Rule
    C)Define Scope Of Check     Availability Check          02 Ind Req
                        Checking Rule               PP Check Rule
              Stock
                   Include Safety stock
                   Stock In Transfer
                   Incl Quanty Insp Stock
    And When No tick Mark Is Applied  In NO Stor Loc Inspectn
    Not Used Checking Group "KP" In components material master.
    After  Making All This Settings Also Before  Order ReleaseWhen Pressed u201CMaterial Availability Checku201D
    The System Is Showing  All Materials Available  In Spite Of Deficit In Storage Location
    Suggestu2026u2026

  • Error while creating order

    hello all,
    i got a error while creating order please help me in resolving the issue,
    Service/maintenance order type AD02 not completely maintained in plant 1000
    Thanks & regards,
    Balaji

    Hi,
    A work order type has specific parameters per plant, when you create a new order type is easier to copy from existing the all the parameters will be copied too; these are some:
    Plant Maintenance and Customer Service>Maintenance and Service Processing>Maintenance and Service Orders>Functions and Settings for Order Types>Assign Order Types to Maintenance Plants
    Plant Maintenance and Customer Service>Maintenance and Service Processing>Maintenance and Service Orders>Functions and Settings for Order Types>Control Key-->Maintain Default Values for Control Keys for Order Types
    Plant Maintenance and Customer Service>Maintenance and Service Processing>Maintenance and Service Orders>Functions and Settings for Order Types>Costing Data for Maintenance and Service Orders-->Assign Costing Parameters and Results Analysis Keys
    Plant Maintenance and Customer Service>Maintenance and Service Processing>Maintenance and Service Orders>Functions and Settings for Order Types>Availability Check for Material, PRTs, and Capacities-->Define Inspection Control
    Plant Maintenance and Customer Service>Maintenance and Service Processing>Maintenance and Service Orders>Completion Confirmations> Define Control Parameters for Completion Confirmations
    Regards,
    Carlos

  • Error while creating Order - ERROR S:\SAPAPO\RRP3

    Hello all.
    We have a planning version called "Planej". The goal of this
    version is for forecasting simulation .
    A few days ago, starts showing this error:
    "S:/SAPAPO/RRP:718 40401681 WAS0
    Error occurred while creating order"
    I thinking in inconsistency in this version.
    I tried /SAPAPO/DELETE_PP_ORDER but don't delete the forecasts.
    Someone know another function?
    Best Regards

    Hi
    Try /SAPAPO/RLCDEL

  • Error while creating order (IBE_SC_ERR_RELOAD_C_MEMBER_UPD)

    we are facing issue while creating Order, the error says “Your cart has been updated by another member.  We have reloaded it for you.  Please reenter your changes.”  (IBE_SC_ERR_RELOAD_C_MEMBER_UPD) .
    It appears if l_last_upd_party_id = l_owner_party_id then this error is reported (PKG IBE_QUOTE_MISC_PVT.Validate_user_update ).
    Please suggest..
    24-FEB-2014:13:49:16 IBE no sharee number
    24-FEB-2014:13:49:16 IBE quote_source_code of cart passed in=IStore Account
    24-FEB-2014:13:49:16 IBE Owner flow with env. userid:  02/24/2014:13:49:16
    24-FEB-2014:13:49:16 IBE Validate_user_update: Before Last update date validation,p_last_update_date= 24.02.2014
    24-FEB-2014:13:49:16 IBE Validate_user_update: Last update date validation START
    24-FEB-2014:13:49:16 IBE Validate_user_update: l_last_update_date=02/24/2014:13:49:16
    24-FEB-2014:13:49:16 IBE Validate_user_update: p_last_update_date=02/24/2014:13:47:45
    24-FEB-2014:13:49:16 IBE Validate_user_update: l_last_upd_party_id : XXXXXXXX
    24-FEB-2014:13:49:16 IBE Validate_user_update: l_owner_party_id    : XXXXXXXX
    24-FEB-2014:13:49:16 IBE Validate_user_update: l_resource_id       :
    24-FEB-2014:13:49:16 IBE Validate_user_update: raising Quote_needs_refresh error : IBE_SC_ERR_RELOAD_C_MEMBER_UPD
    24-FEB-2014:13:49:16 IBE End:Expected exception:IBE_Quote_Misc_pvt.validate_user_update
    24-FEB-2014:13:49:16 IBE Expected exception in IBE_Quote_Checkout_Pvt.SubmitQuote

    Hello,
    This is an expected message when a Shared Cart has been updated by another user.
    There is a check to see if a Member or the Owner updated the Shared Cart.
    Do you have updates to the cart/quote being done via Quoting?  Do you have reproducible steps for this error message?
    Thank you,
    Debbie

  • Runtime Error ( EXPORT_NO_SHARED_MEMORY ) while creating order in CRM

    Hi All,
    i am getting runtime error while creating order in CRMD_ORDER. details of error is provided below
    Runtime Errors         EXPORT_NO_SHARED_MEMORY
    Exception              CX_SY_EXPORT_NO_SHARED_MEMORY
    Date and Time          29.01.2009 02:07:58
    Short text
         Der EXPORT-Datencluster ist zu groß für das SHARED MEMORY.
    What happened?
         The current program had to be terminated because
         a capacity limit has been reached.
    What can you do?
         Please make a note of the actions and input which caused the error.
         To resolve the problem, contact your
         SAP system administrator.
         Select the "Print" function to obtain a hardcopy of the
         current termination message.
    Error analysis
         An exception occurred that is explained in detail below.
         The exception, which is assigned to class 'CX_SY_EXPORT_NO_SHARED_MEMORY', was
          not caught in
         procedure "CRM_EVENT_PUBLISH_OW" "(FUNCTION)", nor was it propagated by a
          RAISING clause.
         Since the caller of the procedure could not have anticipated that the
         exception would occur, the current program is terminated.
    The reason for the exception is:
    This is probably due to a very large dataset, for which there are
    insufficient resources in your installation.
    Das SHARED MEMORY kann Objekte nur bis zu einer bestimmten Maximalgröße
    speichern (1) und hat selbst eine beschränkte Größe (2).
    In diesem Fall wurde die Größe 2 überschritten.
    to correct the error
    Mit den Profilparametern rsdb/esm/buffersize_kb und
    rsdb/esm/large_object_size kann man diese Größen verändern.
    Informationen über diese Parameter erhalten Sie mit der
    Transaktion RZ11.
    Beachten Sie jedoch, dass aus Performancegründen ein einzelnes
    Objekt nicht den größten Teil des Puffers belegen darf, so dass die
    maximal zulässige Objektgröße erheblich unter der Gesamtgröße des
    Puffers liegt.
    The exception must either be prevented, caught within proedure
    "CRM_EVENT_PUBLISH_OW" "(FUNCTION)", or its possible occurrence must be
    declared in the
    RAISING clause of the procedure.
    To prevent the exception, note the following:

    Hello Sudhir,
    Have you set the user parameter CRM_EVENT_TRACE as one of your personal
    user settings? If this is the case, remove this parameter and the dump will no longer occur. The parameter is intended for test purposes only, for a report which evaluates
    which events are published and which function modules are called as a
    result of these events. However, depending on system settings, the
    allocated memory may be too low and lead to the short dump.
    (CRM_EVENT_TRACE is the report which can execute in SE38.)
    Regards, Gerhard

  • Add a custom table for field selection while creating field catalog for LIS

    Hi,
    I have a requirement to add a Custom table to be available for field selection while creating a field catalog for LIS. Its required as there are many custom fields to be used for field catalog creation and adding them in one of the existing tables listed is not a feasible option for us. Please let me knw if its possible..?? If yes how to get it done..??
    Regards,
    Akash Sinha

    hi,
    You need to add your field in the Data Dictionary first. For example, if
    you want the new field in the Order Item field catalog do the following.
    Look at structure MCVBAPUSR (SE11). If you already have a user structure
    appended to this structure then you can add your new field to your existing
    structure. If there is no structure already appended to MCVBAPUSR then you
    must create a new structure with your field in it and then append the new
    structure to this one.
    If you look at structure MCVBAP you will see the data appended to the end
    of it.
    Now you should see it in the field catalog.
    regards,
    balajia

  • Display Net value while creating order

    hi,
    I want to display <b>Net price</b> while creating order. i did automatic pricing and the amount is coming for only basic price,freight and discount but i also gave rebate and that amount is not showing in Net field under sales order. (Net text field exist before Tax area)

    try the field vbap-cmpre(Item credit price) this should be included the tax. you can also put a new subtotal line in you calculation scheme and put this amount in an kzwi to the vbap.
    greeting
    bernd

  • Error pop up while creating order

    Hi WHILE CREATING ORDER IAM GETTING THE FOLLOWING POPUP
    ERROR WHEN CALCULATING COSTS FOR ORDER 0000045678
            LOG IS DELETED WHEN SAVING  DO YOU STIL WANT TO SAVE

    hi
    please check whether the prices are maintain in all the materials as well as the workcenter/cost center /activity type in KP26.

  • Error occured while creating Order

    Hi Gurus :
    When i am creating a new order manually in RRP3 , i am getting error like "Error occured while creating Order" . I ran consistency check and everything looks ok .Any hints would be appreciated

    This is the restriction created during Version creation.
    If we check no planned order without source of supply during version creation , order will not be created in absence of source of supply.

  • Display Totol Stock & Open Order Quantity for line item while creating SO

    Dear Experts,
    We have requiremet that while creating SO (VA01) for each item it sould show the message (Popup Screen) about Total Stock & Total Open Oder quantity for that material when user enters the material, plant & storage location in line item.
    Please let me know your ideas in detail if anyone knows about this....
    Thanks in Advance
    Best Regards
    Venkatesh

    Dear Venkatesh
    It is a standard if you create sale order, whatever stock is available in MMBE, it will show during availability check but additionally if you want to see open orders, then you have to go for additional enhancement.
    thanks
    G. Lakshmipathi

  • Enhancement/Exit for transportation zone while creating/changing customer

    Hi,
    I want Enhancement/Exit for chnging transportation zone while creating/changing customer.

    HI,
    I  used inmplicit enhancement .
    and change kna1-lzone
    but still previous value is store.
    no changes made.
    even i changed
    addr_chg = 'X'.

  • Error while creating order from notification

    Dear Experts,
    I am getting error (No material number transferred(Message no. M3752))  when creating order from R3 notification. the material number not copied from screen to VIQMEL. This is only in few times, not all times. when i debug this, in VIQMEL-FEKNZ = X(Error Records Exist).
    This is only for R3 notification. Also not in all times.
    What is the problem?

    Thanks, I am creating notification thru IW21. form IW22 i am creating order. while creating is gives above error. in this case MATNR not saving in QMEL. even when i am saving in IW22 it's not saving. when i am creating order from IW22 it gives above ror. but it gives error some times only, not all the times. for the same equipment i created so many. some four times only i am getting this.

  • View not copied or enhanced with wizard Error while creating Event Handler method in Z Component

    Hello Friends,
    In one Z Component (Custom Component), in one of the views, while creating event handler, it gave me error message that view not copied or enhanced with wizard.
    I am aware that in Standard Component, if we want to create the event handler method then we need to first Enhance the Component and then we need to enhance the view.
    But, in the Z Component (Custom Component), how to create event handler method in one of the views as while creating event handler method i am getting view not copied or enhanced with wizard error.

    Hi,
    Add a method in views impl class with naming convention eh_on__* with htmt and html_ex parameters.  I dont have have the system right now. Please check any existing event import export parameters.
    Check out do handle event method in the same class.
    Redefine that method.  Call that event method in this handle method. See existing code for reference.
    Attach that event to the button on click event in .htm page.
    Regards,
    Bhushan

  • FM name while creating Order?

    Hi Gurus,
                    Function Module(function or method specific to "Deliver to") name that triggers "Deliver To" field while creating an order in order creation page.
    Thanks in Advance...
    Reagrds,
    Anil.

    If you elaborate your actual requirement, instead of asking a technical solution, it would be better.
    Anyway, if you check the function modules with CRM_ISA prefix, then you will have almost all of the function modules that run behind the scene. There are plenty of them for creating an order from ISA. But ultimately CRM_ORDER_MAINTAIN will be used to update the order.
    Technically a basket is initially created. For every change in the header or item, based on the fields changed, header change or item change are called. This is to optimize the performance and messing up with these without proper understanding will cause you headache in the later stages through performance issues. Item change gets triggered based on the changes in the value of certain key fields.
    Then order save is called when you commit the order.
    So, which function module do you want to know?

Maybe you are looking for