Enhancement for partner determination in STO

Hello, SAP gurus!
We are working on enhancement to copy CR partner role (forwarding agent) from supplying plant's vendor master to STO partner tab. We have found a way, how to select the data and fill it in structure MMPA, which will update STO partner data during STO save. The problem we are facing now is the missing partner data in parnters tab on ME21N screen, when the data is copied. Data is filled in MMPA structure, but something is still missing so it is not displayed on screen, thus it cannot be changed or seen.
Has anyone figured out working solution for this, as SAP does not support partner determination for STO's sccording to note 117537?
Thanks in advance!

Hi,
You need debug the T-code ME21N and see from which run time structure does ME21N displays data on the screen.
And you will also write an enhancement for ME21N.
Hope this is of help to you!
Reetesh

Similar Messages

Access sequence for partner determination

Hi,
I have created a new partnerfunction in CRM Online and assigned it to an existing partner-determination. Addtionially I use the standard access sequence '0004 User' for partner determination.
The partner must not be changeable in the sales transaction.
In the Online transaction everything works fine, but not on mobile sales.
The partnerfunction, the -determination-procecdure and the standard access sequence are already in the IDES-DB.
Is there any additional work I have to do in MSY or AMT?
Kind regards
Thomas

Hi,
you mean you already synchronized CRM_DNL_PAR_FCT, CRM_DNL_PAR_PDD and CRM_DNL_PAR_PDP?
Regards,
Wolfhard

Multiple Message Processors in IB52 for partner determination rule 13200137

Hello Experts,
Can anyone please help me out in one of my issues? I am configuring service desk wherein I need to have only one layer of support team. One consultant for each module. I am using SLFN0001_ADVANCED. I am using rule 13200137 for partner determination. I am using IBASE for determining the message processor.
While determining automatic message processor, IBASE is not allowing more than 1 Message processor. So, all the messages created are getting allocated to single message processor only.
In TRN PFAC, rule simulation for the rule 13200137 is working fine, as per the Org model defined in TRN ppopma_crm.
Can anyone please help me out?

Hi Deepak,
Hope, you are trying to assign more than one partner Function (Message Processor) to a service Desk Message. In such case, check for the max limit of partner function allowed for Message processor in the Partner Determination Procedure in your Transaction Type (SLFN).
The partner function category for the Message Processor Partner Function is Person Responsible. You may face issues in assigning more than one partner function of the same partner function category in a Transaction; If so, kindly refer to sap note 844503.
Regards,
Waseem

User exit for partner determination in delivery document

Hi,
Can some one suggest an user exit for partner determination in delivery document.
We have a scenario of excluding certain plants for few of the partner determinations in delivery document..
Please suggest
Regards
Ravikumar

Hello Ravikumar,
Please ceck if these userexits help
Normally there are 2 userexits available in function kopierte_partner_pruefen:
- EXIT_SAPLV09A_003
- EXIT_SAPLV09A_004
Regards,
Raghavendra YN

Billing user exit for partner determination/substitution

Hi ,
For my SAP ERP , I need a Billing user exit for partner determination/substitution .
If somebody has the info .
Thank's

Hi,
User Exits For Billing:
- USEREXIT_NUMBER_RANGE (Module pool SAPLV60A, program RV60AFZZ)
The internal number range used in the standard system is specified
in the billing type table and can be changed in this user exit. This
user exit is only called when the billing documents is created.
- USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program RV60AFZZ)
In this user exit additional fields for account determination that
are not provided in the standard system are copied into
communication structure KOMKCV (header fields).
- USEREXIT_ACCOUNT_PREP_KOMPCV (Module pool SAPLV60A)
In this user exit additional fields for account determination that
are not provided in the standard system are copied into
communication structure KOMPCV (item fields).
- USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program RV60AFZC)
Depending on the number range, table TVFKD is used to set the
billing date (country-specific requirments in Italy).
USEREXIT_NUMBER_RANGE is automatically deactivated when this user
exit is being applied.
- USEREXIT_FILL_VBRK_VBRP (Module pool SAPLV60A, program RV60AFZC)
This user exit is only called when the billing document is created.
It is used to provide the header and the item of the new billing
document with deviating or additional data.
- USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB)
Printing the item line of a billing document can be supplemented or changed.
- USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)
Printing the header line of a billing document can be supplemented or changed.
- User exits in program RV60AFZD
Short descriptions of the user exits are contained in the program:
- USEREXIT_RELI_XVBPAK_AVBPAK
- USEREXIT_NEWROLE_XVBPAK_AVBPAK
- USEREXIT_NEWROLE_XVBPAP_AVBPAK
The following user exits are available in report SAPLV60B for transfer to accounting (function group V60B):
- EXIT_SAPLV60B_001: Change the header data in the structure acchd
You can use this exit to influence the header information of the accounting document. For example, you can change the business transaction, "created on" date and time, the name of the person who created it or the transaction with which the document was created.
- EXIT_SAPLV60B_002: Change the customer line ACCIT
You can use this exit to change the customer line in the accounting document. This exit is processed once the ACCIT structure is filled in with data from document header VBRK.
- EXIT_SAPLV60B_003: Change the customer line in costing
The customer line is filled in differently for costing. You can use exit 003 to influence the ACCIT structure.
- EXIT_SAPLV60B_004: Change a GL account item ACCIT You can add information to a GL account item (such as quantity specifications) with this exit.
- EXIT_SAPLV60B_005: User exit for accruals
Once all relevant data for accruals was entered in the GL account item, you can add to this data with this exit.
- EXIT_SAPLV60B_006: Change the control line ACCIT
You can use exit 006 to add information to the control line.
- EXIT_SAPLV60B_007: Change the installment plan
You can use exit 007 to add information to the installment plan parameters in the GL account item.
- EXIT_SAPLV60B_008: Change the transfer structure ACCCR, ACCIT and ACCHD After the accounting document is filled in with data, you can use exit 008 to change the document once again.
- EXIT_SAPLV60B_010: Item table for customer lines
You can use exit 10 to influence the contents of customer lines before they are created.
- EXIT_SAPLV60B_0011: Change the parameter for cash account determination or reconciliation account determination
You can use this exit to change inbound parameters in order to influence account determination.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

Access sequence for Partner determination -Sales and Interaction Center CRM

Dear experts,
We use som transaction types both in our sales (t/c crmd_order) and in Interaction center (t/c CIC0).
We though want the partner determination to act differently when creating this transaction in sales compared
to when creating it in the interaction center. For example in the sales process we want the contact persons to be searched from the relationsship of the sold-to party but in customer service we do not want an automatic determination.
There are some BADIs available that can be used in the access sequences as a source but can they be used to
switch off some automatic determination when creating the transaction in t/c CIC0 whereas the automatic determination should work when creating the transaction in the sales process ie. t/c crmd_order?
Looking forward to have any input on this, thanks!
best regards,
Christina

Hi,
What we did is to remove the automatic determination on the transaction type that is used both in the sales process and Interaction center/customer service. The partner in question is only determined from the previous document in case you
create a follow-up document.
rgds,
Christina

Table Name for Partner Determination Procedure and created by data

Dear Gurus,
kindly let me know the table name for a list of "Partner Determination Procedure" and "created by" data under a client.
if there is no such table for this, kindly let me know how can i fetch these details.
Wishes,
Abhishek

Hi Abhishek,
You can get your required information by combining these 2 table by using SQVI
TPAER where it gives PartnDet.Proc and Part.funct.
TPAR where it gives Part.funct inforamtion.
By using these tables i.e. by using Common field Part.funct. - PARVW
Regards
Durga Sana

HOW TO USE ZONE ADRC-REGIOGROUP for Partner determination in opportunity

Hi Everyone,
We have an issue link to partner determination.
We need to determine employee function from the address of the sold-to-party activity person function.
In fact the REGIOGROUP field within the selected address in the opportunity is what we need to determine the employee function.
In the meantime we created the attribute REGIOGROUP in the Tcode PPOMA_CRM and we assigned a value to an orgdata.
We couldn't find any rules or function or Badi that does the link between the regiogroup of the address of the activity person and the attribute with same regiogroup value in orgdata in order to have the employee that works in the regiogroup.
Do you have any clue about the way to use this regiogroup?
When we press F1 on the REGIOGROUP field here is documentation we have:
"Regional structure grouping
Regional structure grouping combines all elements of the regional structure (cities, streets, street sections). It is used, for example, for clerk determination."
Does anybody know how to make this clerk determination work? do you know where i could find information about it?
Many Thanks
Laurent Monza

Laurent,
You can implement the BADI COM_PARNTER_BADI and one of the methods
DETERMINATION_ADD_IN
Then you create a new access sequence that uses the exit as the source and assigned that to your partner determination procedure.
Good luck,
Stephen

Accounts for Partner Determination

Hello Experts,
I am confuse how many account group to be created for below requirment.
Description Account group
Sold-to party      ZEU1
Ship-to party      ZEU2
Bill-to party      ZEU3
Payer              ZEU4
Non Trade Customers ZEU5
Sales Rep     ZEU6
Inter-company     ZINT
Thanks
Shri..
Commission Agent     ZEU7
Thanks
Shri..
Edited by: shrii on Jun 13, 2011 1:11 PM
Edited by: shrii on Jun 13, 2011 1:12 PM

Hi Ram,
Thanks for your reply.
below is in detail .
Could you be more specific.I should create individual account group and assign the partner determination to each account group.Is that so ???
EG Sold-to party      ZEU1     A1
EG Ship-to party      ZEU2     A1
EG Bill-to party      ZEU3     A1
EG Payer      ZEU4     A1
EG-Non Trade Customers     ZEU5     A2
EG Sales Rep     ZEU6     XX
Inter-company     ZINT     XX
Commission Agent     ZEU7     XX
Thanks
Shri..

User Exit for Partner Determination in VA01, VA02 transaction ( Sales order

Dear All,
I have an issue in which i need to determine partner for every change in ship to party both at header and item level during sales order creation or change.
Can you please suggest an appropriate user exit for the same.
I have tried
EXIT_SAPLV09A_003
EXIT_SAPLV09A_004
but they get triggered only when we enter into VA01 transaction and not when the ship to party is manually changed.
If possible i want to avoid MV45 exits as there are chances of regression due to too many different functionalities already present in my system.
In worst case scenario please specify the place wherein i need to code in MV45 exits and what are the fields i need to change.
Most probably i filtered out on "USEREXIT_MOVE_FIELD_TO_VBAP" but i am not 100 percent sure on this, please suggest.
Thanks in advance
Ronak

Hi,
please use User exit function: EXIT_SAPMV45A_003
Put your coding in include: ZXVVAU05 (create it by double clicking, if not already created) and activate.
Regards,
Sanjay Gogikar

BADI for Partner Determination in Sales Order

Hi Experts,
Please guide me on this issue:
Issue: When we create sales order in CRM..through org data profile...org entities will be derived automatically and based on this partners also determined.However my situation here is something differrent.We are maintaing one Z table for sales office and vendor number.Once ord data is derived in sales order,custom defined program should read sales office from org data and check the correspoding entry in z table,if its find match....put the entry as a partner function under partners tab.
I am searching for BADI's which will trigger after the org data determination and populate the vendor number as a parner function under partner tab.
I tried using all standard partner badi's and sales order badi's...but no luck.
Please help.
Thanks

COM_PARTNER_BADI should help.
We have successfully used method DETERMINATION_ADD_IN_3 to achieve something similar.
Regards,
Kaushal

Continuous "Access Sequence" for partner determination procedure

Hi, I use access sequence for detemining BP in T-cd: CRMD_ORDER.
It seems that partner is determined only once.
If I enter BP and later on set different BP, access sequence only works for the first BP only.
Access sequence for the second BP never works.
Can I change custozming so that access sequence works every time I change BP?
Thanks and regards
Koji

Thank you, but my setting in Determination time is already set "Recurring".
But still acess sequence works only for the first BP. From the second BP, I have to manually push redetemination button. Not automaic.
Is this my version's problem?

No partner functions for partner determination profile found

Dear Experts,
I encountered a situation whereby a message above is displayed as Info on ICWC. I have configured a new Agent Inbox and IC Webclient Profile.
I simulated user login and was prompted with the above info. User has a BP record created of type Employee. User is assigned with Partner Function Service Employee Group in IBASE.
I am using CRM 5.0.
I'd appreciate your assistance.
Thank you.
HJMY

Hi Experts,
My issue is resolved now. Per my checking, this issue is related to a configuration on a customized setting.
Please ignore this message.
Thx.
HJMY

User Exit for Partner Determination

Hello Experts,
I have a requirement where if user manually adda a ZZ partner function to partner header in Sales document, then a ZX partner function should be automatically created.
Is it possible to configure it through VOPA transaction?
Or else which user exit I can use and how to use it?
Thanks,
Swati

Hi,
As far as my understanding this not available,
You can fetch it both partners from customer master, why u put it manually in sales order ???
Kapil

Territory and partner determination procedure for employee responsible

Hi CRM team,
I have a little issue for you I'll be very thankfull if someone could help me.
There is the organisation of the territory management in the company I'm working for:
-Country
-Region
-sector
*each sector have a determination rule based on 1 condition "1 field from the BP Header (customer)"
*each sector have a position assigned to it. (Organisational model PPOMA_CRM) And there is 1 or 2 employee affected to each position..
*When creating an activity,*
*First thing I enter the Account (customer: activity partner)*
*I would like the system to determine the employee affected to the sector of the BP as the employee responsible.*
Any Idea?
For the moment, I'm searching in the partner determination procedure. But the standard access sequence Business Partner Relationships: Activity Partner -> User dont work.
There is some sitting from my IMG:
The partner fonction Employee Responsible is with
*fonction category: employee
*usage: CRM
*Relationship category: Is the employee responsible for
Partner determination procedure:
In the acces sequence, I put a dialogue seq 15 :
Business partner from territory
And in the detail on source, I put:
Fonct. categ. : Employee
Usage: CRM
It dosn't work...
I don't know if I'm am searching in the right place.
Could you help me with a solution to have the needed system behavior????
Thanks a lot for your time and your help.
Best regards,
Ahmed.

Hi Ahmed,
After created determination rules for territories have executed the report CRM_TERRMAN_PROC_REL for initial option?
Once territories and determination rules are created, you need to run the above report in Background(schedule a batch job) which will establish relationships between the territories and corresponding attributes. You need to run this report every time there is a change in determination rule of create/change territories.
This should resolve your problem
Regards,
Priyanka

Enhancement for partner determination in STO

Similar Messages

Maybe you are looking for