Enhancement in Asset Master - Origin Tab

Dear All,
There is a requirement to enhance the Asset Master. The details are given below:
Contact Period: From : To: required in Asset Masster>Origin Tab below the Manufacturer Field.
Is it possible?
Any fields or tabs are available to enter the Lease Assets?
Expecting valuable guidelines from the experts.
Thanks in Advane.
Regards,
GB

Hi,
May be in your case the field status might have changed for leasing tab.
SPOR->IMG->FA->AA->Master Data->Screen Layout->Define screen layout for asset master data->Define screen layout for asset master data.......
Here choose your each screen layout rule and choose logical field groups and choose LFG 5-Leasing and choose field grouyp rules.
There make field status as optional for all the fields and then check.
And go to AOLA and choose layout SAP and choose Tab page titles->7-Leasing->Postition of groups on the tab pages*
There leasing tab must have been given.
Please check
Thanks,
Srinu

Similar Messages

Enhancement in the Master data Tab in the BP transaction

Dear all,I need to create news fileds in the Master data tab in the BP transaction. This fields are not imput fields but the content of this fields are customer specifics number which will be generated when creating a BP. This numebr will be generated in the BUT000 Table in the BP number field.
My Question is : How can i create New Fields in the Master Data Tab, is it possible to use the EEWB for that or not ?
thanks in advance for ur help.
liliane

Hi liliane,
You can use eewb however it should be used very cautiously as once changes are made there are tables and attributes that are created correspondingly. I mean activities like Bdoc creation for the fields added happen simultaneously and you may not be able to revert changes.
Thanks,
vivek

Enhance the Time Dependent Tab of the Asset Master AS01

Hi,
My requirement is to enhance the Asset Master Client dependent Tab transaction AS01.
I have added a field in the ANLZ through some Append Structure.
And added that field in the Custom Screen.
After doing the functional config that field is visible.
In the Time dependent tab, when we press MORE INTERVEL PUSH BUTTON A new screen appear with certain fields which already present in the Time dependent tab.
Now my question is: How I can insert the new enhanced field in that and how we can save the data in ANLZ table.
We are using ECC 5.0 version, requirement is to add some fields similler to ECC 6.0 version in time dependent tab of AS01 transaction.
Thanks in Advance,
Hari
Edited by: Hari prasad REDDY 123 on Dec 17, 2009 2:52 PM

Hi hari,
Was this problem solved ? Wuld be great if you could le me know the solution .
Thanks!!

Original asset Field in Asset Master

Hi Viewers,
Field Original asset in origin Tab is available for some asset classes. Few is asset classess that field is not available.
Can any one tell me where to activate that field. I have checked in the screen layout of the asset master data. It is not available there.
Thanks
Aswin

Proceed as follows.
1. IMG --> Financial Accounting --> Asset Accounting --> Master Data --> Screen Layout
2. Click on Execute "Define Screen Layout For Asset Master Data
3. Double -Click on Create Screen Layout for Asset Master Data
4. Select the layout you to make original asset number available for
5. Double click on Logical Field Group
6. Select Origin
7. Double Click on Field Group Rules
8. Make 41 ( Asset Under Constr) as optional and then check off both Mn No. and Sbno.
9. Save.
The above solution should resolve your issue. Refer back for any further clarification.
Elias

How to activate fields under origin tab in the asset master data

Hello Gururs,
While creating asset master data under origin tab there are two fields in display mode . I am unable to change these fields . the fields are 1.) Asset purchase new. 2.) Purchase used. I want to check one of these two check boxes. But they are in display mode. How can i activate these two fields.
In asset master data screen layout also i didnot find these two fields under origin category . Pls advice
regds
Ramachandra

Hello Markus ,
Thanks for your reply. I checked through Group box info then system is showing the following message .
status - DISPLAY
Reason - Authorization for asset view used
In screen layout field i didnt find these two fields . Can you tell me where these settings has been done . How to change the status for these fields.
regds
ramachandra

Investment order field is missing in origin tab of asset master (AuC)

Dear Experts,
While creating an asset master (AuC), the Investment Order field is not shown for the input, in the Origin Tab. Whereas for Asset master for the other Asset classes are showing this field for the input.
Please advice how can I get this field in the asset master under AuC asset class.
Thanks in advance in anticipation.
An early reply is well appreciated and properly rewarded with points.
Regards
Preethi

Hi,
First check the asset Scr.layout rule for asset class by using path -
Spro>Financial Accounting>Asset Accounting>Organizational Structures>Asset Classes-->Define Asset Classes
Select your asset class and check - asset Scr.layout rule .
Then go to -
Spro>Financial Accounting>Asset Accounting>Master Data>Screen Layout-->Define Screen Layout for Asset Master Data
Click on - Define Screen Layout for Asset Master Data
Select your Screen layout which you got earlier. In Logical Field group select 'Inv. account assignment'. and double click on field group rule.Then make required changes in 'Investment Order' as required - Required, optional, display.
Then check asset master data in AS02.

Tab layout for asset master

hi kings
I am unable to find the tabs in assets accounting. Because at the time of asset master creation i am getting only 4 tabs. So i want to add some more tabs in the asset master. So how it is possiable to maintained the laout tab in the asset master.
regards
ram

hi EC
I am explain the problem :
At the time of asset master creation i can found it only 4 tabs i.e general,time-dependent,Allication,Depreciation areas.
But i want some more tabs like Origin,Insurance,Networth tax. in Asset master records.
As per my knowledge i am maintained the one layout and in that layout cantains the all the tabs in asset accounting. That layout has been assign to respective asset class.
Eventhough i am not gettting the all the tabs in asset master. So i do for the my issue.
regards
ram

Group box in asset master record's tab overlap each other

Hi Gurus,
I was wondering anyone has seen the same issue that I'm experiencing. I'm on EHP6 and have logged the issue with SAP but wondering if you've faced the same problem.
I basically designed a new tab layout with 2 tabs and assigned the following group box to the 1st tab
S0001     General
S0003     Time-Dependent Data
S0002     Posting Information
S0013     Equipment
to the 2nd tab I only assigned
S0009     Origin
S0100     Depreciation Areas
Then I assigned the new tab to the asset class.
Now when I create the asset through AS01, the tab and group boxes appear however the time-dependent group box overlaps with posting information (please see below). Have you experienced the same issue in your environment?
Thank you.

Dear Minab,
This is definitively the problem of overlapping of the layouts.
The asset master data transactions AS01, AS02 and AS03 uses a generic tool to define the screen layout. Unfortunately there are some restrictions on that tool which are based on basis functionality.
The problem is caused by compression and resizing (note 203023)
Since Release Enterprise there are more fields on that screen in Release Enterprise than before.
Hence, the problem is caused by the definition of your asset layout the solution in your case could be to move the screen to an own subscreen or to move this screen to the end of the tab.
Please go the customizing (transaction SPRO) and follow these steps:
   Financial Accounting -> Asset Accounting -> Master Data -> Screen
   Layout -> Specify Tab Layout for Asset Master Record -> Define Tab
   Layout for Asset Master Data
Select in your layout the relevant tab page.
Here you may need to change positions and group boxes around. Unfortunately there's no other solution possible due to technical restrictions.
best regards Bernhard

Enhancing tabstrip for asset master

Hello,
I need to create an extra tab in a tabstrip control in Asset Master (tcode AS03). To that tabstrip I have to add 4 fields, the struture for which was already defined in customer include (CI_ANLU).
Fields in CI_ANLU:
ZZACQMETH
ZZMOVATT
ZZCUSTOD
ZZPURPOSE
How do I go about accomplishing this?
Thank you

Hi Andrei,
Below are the possible enhancements for the transaction AS03.
AAPM0001 - Integrtn of asset accounting and plnt maintn.
AFAR0003 - External changeover method
AFAR0004 - Determnt. of proportional values for retirement
AINT0004 - Change amount posted for certain areas
AINT0005 - Dummy for extended syntax check. Do not use.
AISA0001 - Assign Inventory Number
AIST0001 - Exchange number range in master data maintan.
AIST0002 - Customer fields in asset master
AMSP0002 - Determn. relationship type for 2 company codes
TRAN0001 - User exit for asset transfer
In this I think the enhancement <b>AIST0002 - Customer fields in asset master</b> will solve your purpose.
Check the Documentation avaliable for this enhancement in SMOD and create a project in CMOD.
Reward me if the points are valuable.
Regards,
Prakash.

Add custom tab in Asset Master

Dear Experts,
I would like to add a custom tab in asset master (AS01, AS02, AS03).
I have read through the documentation for enhancement AIST0002, but still don't know how to do it.
Can anyone please advise? Thanks a lot.

Hi,
If you have create a proj in CMOD and activated the screen the new tab should be avaliable if it is not it might need some customizing try like below:
Transaction AOLK>>Select your Asset class click on General Assignment of Layout
Go to transaction AOLA. Copy the tab layout u2018SAPu2019 to create another layout, say, ZSAP.
System will copy all the settings and will inform you about that.
Select your newly created layout and double-click on the folder u2018Tab page titlesu2019.
You want to put your custom fields in the tab page u201CGeneralu201D. So, select this tab page entry and double-click on the folder "Position of Groups".
Here, all the field groups currently residing in the tab-page u201CGeneralu201D are shown. Add an entry for your newly created fields.
Select the group box from the list. An entry will come with u201CUu201D padded with the custom subscreen prepared by you.
Then, save and come out.
Now, go to tcode AOLK and assign tab layout ZSAP. for asset class 1000.
check now.
Regards,
Himanshu

Creation of main asset master-as01-----DEPRICIATION TAB: (Error) empty

HI experts!
I selected asset class :AML2000 Department A
company code:AML
enter
Discription: Machine No.1
Capitalization On :05.06.2011
TIME DEPENDENT TAB
Business are: AMLH
DEPRICIATION TAB: Error: no fields in that tab ...its empty...
Regards,
Ramesh
Edited by: sagiinfo on Oct 28, 2011 12:41 PM
Edited by: sagiinfo on Oct 28, 2011 12:42 PM

Hi,
Also check Define Screen Layout for Asset Master Data & Define Screen Layout for Asset Depreciation Areas in Master Data in Asset Accounting.
Trust this will resolve your issue.
BR,
Mehul

Asset Master Record - Time Dependent tab - locations to be created

Hi Guru's
Hot to create the new locations in the Asset Master Record - time dependent tab.
Some locations descriptions I need to change.
Please help me.
Regards
Jenny Connes

Hi,
change your location description at following SPRO location:
SPRO->Enterprise Structure -> Definition->Logistic - General ->Define Location
Thanks,
Dharmesh

Man/Assessed val.ind in the net worth tax tab of the Asset Master.

Hi Friends,
Checkbox Indicator:Manl net worth tax val. field in the Net worth tax tab is optional in the screen layout rules for an Asset class. But the Check box is not appearing before the manual networth value field in the Asset master data. Could you please through some light on this why it is not appearing in the Asset Master even it is optional in the screen layout rules.
Thanks and Regards
Koteswararao Padarti

Hi Bernhard,
First of all thanks for your response. The maintenance level in the screen layout is at Main Asset number. Just for understanding, Even if the maintenance level is at Asset class level only the default values should flow to the master and it should be modifible at Asset Master level.
In My case the maintenance level is at Asset Main number level, but still it is not appearing. Please let me know is there any thing else can effect this field status?
Thanks and Regards
Koteswararao Padarti

Screen Enhancement on T-Code AS01 (Asset Master)

Hi Experts,
I want to add a filed of Customer Number( KUNNR) on the Asset Master Screen ( t-code AS01)
I have done a lot of work....
I have used the Enhancement AIST0002 ..... also make the Subscreen....
In Short, now my field is Displaying on the Asset master Standard Screen. also displaying the F4 help against it...
*Problem:*
when i save the Data ... it does not save the data...
I also check the table ANLU. there is no record exist... (boz i did not write any Code)
Can i have to Write the Update Query for save the Record?
Note: i am first time making the Screen Enhancement.
Regards,
Rizwan

Dear George Serfiotis,
i have find the solution completely ... now, not only my Screen is displaying but also working properly..
http://binarycse.com/joomla/index.php/sap-abap/screen-exits
<<CUT AND PASTE OF ABOVE LINK DELETED>>
<<REQUEST FOR POINTS DELETED. It was your question anyway...>>
Rizwan
Edited by: Matt on Nov 18, 2008 3:08 PM

Change/ Add screen in Group Box specify tab layout for Asset master Record

Hi All,
I need to add or change group box in specify tab layout for Asset Master Record. Please advice where i can change or create new Group Box.
Thanks & Regards,
Pankaj

Hi,
Try at below path:
Financial Accounting (New)>>Asset Accounting>>Master Data>>Screen Layout>>Define Screen Layout for Asset Master Data.
here you can change the layout for the same.
Kind Regards,
Mehul

Enhancement in Asset Master - Origin Tab

Similar Messages

Maybe you are looking for