Enhancement in ME51n, ME52n, ME53n,

Hi experts,
I want to add one tab in Purchase requisition screens(, ME51n,ME52n,ME53n). In that tab i need to add some fields. i need to do using MEREQ001 . Can any one tell me how to do it? please......
Thanks
siva
Moderator message: please do more research before asking, show what you have done when posting.
Edited by: Thomas Zloch on Feb 14, 2012

Hi,
You can't use the BADI " ME_PROCESS_REQ_CUST.
The main purpose of this badi is use to validate the PR at different levels. If you see the methods of that BADI for eg :
1. Process_header : This for validating the header part.
2. Process_item : This for validating the line item details.
Like that there are so many methods are there inside this BADI.
You mentioned that you deactivated the Existing Project of PR and i want to know in which package you have mentioned.
If that existing project is not needed you can delete the old one and incoporate the new logic and the old logic in the new project.
Hope you got some idea now.
With Regards,
Sumodh.P

Similar Messages

Screen enhancement in ME51N/ME52n/ME53N

Hi All,
I want to display 2 additional tabs in the line item of ME52N tcode. There is already an enhancement MEREQ001 created in a project named MEREQ001. I tried to do the changes in the existing screen after deactivating the project, But after creating the tabs in the screen & when i try to save it I am getting an information message "Object can only be created in SAP package" , and after clicking continue i get the error "SAP object FUGR XM02 cannot be assigned to package ZMM". But even if I try to save it in any other namespace I am getting the error "Object belongs to function group with customer exit", and it will come out of the screen layout deleting the changes made the screen layout.
My requirement is to display 2 tabs in the Tcode Me52n, and the user must be able to fill data in these tabs & the data should be saved in the database on clicking save.
Is it possible to use Badi "ME_PROCESS_REQ_CUST" ?, if yes then please advice how.
Thanks in advance.

Hi,
You can't use the BADI " ME_PROCESS_REQ_CUST.
The main purpose of this badi is use to validate the PR at different levels. If you see the methods of that BADI for eg :
1. Process_header : This for validating the header part.
2. Process_item : This for validating the line item details.
Like that there are so many methods are there inside this BADI.
You mentioned that you deactivated the Existing Project of PR and i want to know in which package you have mentioned.
If that existing project is not needed you can delete the old one and incoporate the new logic and the old logic in the new project.
Hope you got some idea now.
With Regards,
Sumodh.P

Change the name of custom tab in me51n / me52n / me53n

Hi,
I have to add a few custom fields in PR item of transactions me51n / me52n / me53n. I have used the enhancement MEREQ001 for adding the custom fields. The sytem automatically creates a custom tab with the name Customer Tab for the additional fields that I have added using the enhancement MEREQ001 while displaying in me51n / me52n / me53n.
Now I have a requirement to change the name of the custom tab created for transactions me51n / me52n / me53n from Customer Data to Others.
Can anyone suggest me how to go about doing this???
Thanks in advance.
Abhisek.
P.S.:- Points will be be duly awarded 4 helpfull answers.

Hi,
I tried doing whatever you had suggested but it seems that it is not working.
Could you suggest some other way to do this?
Thanks and regards.
Abhisek.

User Exit ME51N/ME52N/ME53N when save purchase requisition

Hi,
I want to validate purchase requisition data for release startegy. If there is no value for release startegy .Then ME51N/ME52N/ME53N populate a custom message before saving.
I have found the Enhancement MEREQ001.Can anyone help me to find the exit because there are 10 user exit for this enhancment.
Thanks in advance,
Harinder

Hi,
Follow the following steps to find the EXIT
1. Open transaction SE24.
2. Now open the object CL_EXITHANDLER in display mode.
3. Go to the method tab and double click on the method GET_INSTANCE.
4. Put a break point on cl_exithandler=>get_class_name_by_interface.
5. Now execute the transaction you want to find EXIT for, it will take you to the above method.
6. Write EXIT_HANDLER in fieldnames and hit enter, it will tell you the EXIT used for your transaction.
7. Hit F8 and it will tell you all the EXITu2019s for your transaction.
Now put break points in each user exit and check which one gets triggered for your transaction.
Regards,
Manish

Activate text for Cost Center for ME51N, ME52N, ME53N

Hi, experts
As a requirement on T/C ME51N, ME52N, ME53N is needed to activate on "Account assignment" tab, the text for Cost Center field, how can I do this?
Thanks in advance.
Is there any path or exit could help with it?

I need to add on Tabstrip "Account assignment" for fields
CO Area and Cost Center text field description ( right side ) for each one.
How can I do this? Thanks in advance.

Display descriptions of cost center and G/L account in ME51N/ME52N/ME53N

Hi Experts,
Can any one suggest that how to display descriptions of cost center and G/L account in account assignment subscreen- ME51N / ME52N / ME53N.
Thanks in Advance...
Siva

hi
if the field is required then u have to enter them manually
so if this are not required then goto OKB9 here give the default cost center for the Gl acct

ABAP runtime error while doing ME21N, ME22N, ME23N, ME51N,ME52N, ME53N

Dear All Expert,
I am facing problem while doing ME21N, ME22N, ME23N, ME51N,ME52N, ME53N,
Please find the below ABAP Runtime Error.
Runtime Errors         LOAD_TYPE_VERSION_MISMATCH
Date and Time          10.02.2011 11:13:07
Short text
     Change of a Dictionary structure at runtime of a program.
What happened?
     Runtime error
     The current ABAP program "CL_IM_WRF_MM_PROC_PO==========CP" had to be
      terminated because one
     of the statements could not be executed at runtime.
What can you do?
     Restart the program.
     If the error persists, contact your SAP administrator.
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
Error analysis
     The ABAP runtime system detected that the Dictionary-type "WRF_POHF_KOMP_STY"
      changed
     during the flow of the transaction.
     As the type was already used in the old version
     and in the new type should be used in the same transaction in the new
      version, the transaction had to be cancelled to avoid inconsistencies.
How to correct the error
    Try to restart the program.
System environment
    SAP-Release 700
    Application server... "iqe"
    Network address...... "172.25.0.85"
    Operating system..... "Linux"
    Release.............. "2.6.9-55.ELsmp"
    Hardware type........ "x86_64"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 0
    Shortdump setting.... "full"
    Database server... "iqe"
    Database type..... "ORACLE"
    Database name..... "IQE"
    Database user ID.. "SAPSR3"
    Terminal................. "MUMJML5727"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Dec 26 2010 20:17:07"
    create on........ "Linux GNU SLES-9 x86_64 cc3.3.3"
    Database version. "OCI_102 (10.2.0.2.0) "
Patch level. 285
Patch text.. " "
Database............. "ORACLE 10.1.0.., ORACLE 10.2.0.., ORACLE 11.2...*"
SAP database version. 700
Operating system..... "Linux 2.6"
Memory consumption
Roll.... 16192
EM...... 25139088
Heap.... 0
Page.... 40960
MM Used. 8038136
MM Free. 4528408
User and Transaction
Client.............. 600
User................ "JKMM"
Language key........ "E"
Transaction......... " "
Transactions ID..... "4D524AD1FD7A42F9E1000000AC190055"
Program............. "CL_IM_WRF_MM_PROC_PO==========CP"
Screen.............. " "
Screen line......... " "
Information on where terminated
    The termination occurred during generation of the ABAP/4 program
     "CL_IM_WRF_MM_PROC_PO==========CP".
    The termination occurred in line 213
    of the source code of program "CL_IM_WRF_MM_PROC_PO==========CM007" (when
     calling the editor 2130).
Source Code Extract
Line SourceCde
183   DATA: l_flag TYPE wrf_pbas_boolean.
184
185   CALL FUNCTION 'WRF_POHF_MSG_READ_PREVIEW_FLAG'
186     IMPORTING
187       e_preview_flag = l_flag.
188
189   IF NOT l_flag IS INITIAL.
190
191     DATA: l_header TYPE REF TO cl_po_header_handle_mm.
192
193     MOVE im_header ?TO l_header.
194
195     CALL METHOD l_header->if_output_mm~preview( ).
196
197     CALL FUNCTION 'WRF_POHF_MSG_RESET_PREV_FLAG'.
198
199 ***$ Widening Cast for printing information.
200 **    CALL FUNCTION 'WRF_POHF_STORE_PRINT_INFO_SET'
201 **      EXPORTING
202 **        im_header = l_header.
203
204 * Printing Preview
205 * IF NOT gv_preview IS INITIAL.
206 *    CALL METHOD l_header->if_output_mm~overview( ).
207 *    CALL METHOD l_header->if_output_mm~preview( ).
208 * clear gv_preview.
209   ENDIF.
210
211 * ENDIF.
212
>>>>> ENDMETHOD.
Internal notes
    The termination was triggered in function "ab_RxDdicStruShareFailed"
    of the SAP kernel, in line 2539 of the module
     "//bas/700_REL/src/krn/runt/abtypload.c#11".
    The internal operation just processed is " ".
    Internal mode was started at 20110210111306.
    Name of the changed type......: "WRF_POHF_KOMP_STY"
    New version of the type.......: 20070508193207
    Old version of the type.......: 20070508193207
    New user......................: "Type" "WRF_POHF_KOMP_STY"
    Version of the new user.......: 20070508193207
    Old user......................: "???" "???"
    Version of the old user.......: "???"
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
(CTrcStack2+0x78)[0x6cbb78]
(CTrcStack+0xb)[0x6cc17b]
(ab_rabax+0x3be5)[0xb8d985]
(_Z24ab_RxDdicStruShareFailedPKtm4RUDIS0_S1_S0_+0x163)[0xb16823]
(_Z19ab_GetDdicTypeIndexPKtm4RUDI+0x1f6)[0xb0dbb6]
(_Z11ab_LoadViewPtjPKtPK11PROGRAMHEADPj+0x27e)[0xb16ede]
(_Z18ab_GetDdicTypeLoad4RUDI+0x6e)[0xb1705e]
(ab_GetView+0xc1d)[0xb0ee1d]
(_Z20CompressInitRcByDatajPK6CG_DIRjjS1_jj4RUDIPKhj+0x60d)[0xe32b2d]
(_Z21cg_CompressStackFrameP4TRIGjj+0x169)[0xe33399]
(_Z8cg_blkleP3ENV+0x75f)[0xe4779f]
(_Z9sc_cblklePKt8ENV_KINDP7SC_INFO+0x394)[0xe90024]
(sc_blkle+0xdd)[0xec6e4d]
(rs_oper_abap1729+0x37)[0x10eb237]
(rs_expan_abap+0xa1996)[0xfd7a2a]
(_Z8sc_expanj+0x76d)[0xe1d55d]
(_Z5parsejPi+0x258)[0xe19998]
(sc_check+0xb9c)[0xe1857c]
(sc_inclu+0x5fa)[0xe0d50a]
(rs_oper_abap2160+0x3a)[0x1115d6a]
(rs_expan_abap+0xcd41d)[0x10034b1]
(_Z8sc_expanj+0x76d)[0xe1d55d]
(_Z5parsejPi+0x258)[0xe19998]
(sc_check+0xb9c)[0xe1857c]
(sc_checkStart+0x41)[0xe1ac51]
(cg_generate+0xb65)[0xe57755]
(ab_gabap+0x14a)[0xb01a5a]
(dy_gen_abap+0x63c)[0x74428c]
(ab_genprog+0x13d3)[0xb03d13]
(_Z17ab_LoadProgOrTrfoPKtjPj+0xb56)[0x8f9ab6]
(_Z11ab_LoadProgPKtj+0x11)[0x8f9ca1]
(_Z15LoadGlobalClassPKtjjj9ClasState+0x24c)[0x958c2c]
(_Z11FillCfixIntPK4CREFP4CFIXjj9ClasState+0x214)[0x957404]
(_Z11ab_FillCfixtj+0x65)[0x957ae5]
(_Z26ab_CrefToCladId_ActivateOKtPh+0x7d)[0x957b6d]
(_Z8ab_jaboov+0x623)[0x959793]
(_Z8ab_extriv+0x607)[0x8ba9c7]
(_Z9ab_xeventPKt+0x1c1)[0xa1c021]
(_Z8ab_triggv+0x9c)[0xa1c77c]
(ab_run+0x97)[0xbde5c7]
(N_ab_run+0x9)[0x736359]
(dynpmcal+0x669)[0x7333b9]
(dynppai0+0x8eb)[0x734d9b]
(dynprctl+0x3e9)[0x733db9]
(dynpen00+0x4a5)[0x726eb5]
(Thdynpen00+0x359)[0x541bd9]
(TskhLoop+0xc49)[0x54d999]
(ThStart+0x20f)[0x55b29f]
(DpMain+0x2da)[0x4bd49a]
(nlsui_main+0x9)[0x4910c9]
(main+0x33)[0x491103]
/lib64/tls/libc.so.6(__libc_start_main+0xdb)[0x3cde51c3fb]
Please help me to resolve the issue.
Thanks & Regards
SKK

read this part again: The ABAP runtime system detected that the Dictionary-type "WRF_POHF_KOMP_STY" changed during the flow of the transaction. As the type was already used in the old version and in the new type should be used in the same transaction in the new version, the transaction had to be cancelled to avoid inconsistencies. How to correct the error Try to restart the program
how often had you restarted ME21N before you posted this message?
In best case this message appears only once, because the program / or dictionary was changed while you executed ME21N
If many times, then contact your ABAPer, because then he probably did not transport all objects that were changed, or the objects have to be regenerated in your system.

Availability Overview in ME51N, ME52N, ME53N

Hi,
When I go to the menu path Environment -> Availability in transactions ME51N, ME52N or ME53N, nothing happens. The expected behaviour is the display of availability overview as in transactions ME21N, ME22N, ME23N.
I found the same thing to happen in several SAP systems. What is the reason behind this strange behavior?
Thank you.
Helpful answers will be rewarded.

Availability check only possible for stock transfer items

ME51N/ ME52N/ ME53N

Hi,
I added a new tab at item level of Purchase Requisition using enhancement MEREQ001 screen SAPLXM02 screen number 0111. The fields that i placed in my new tab had been added to include table CI_EBANDB. The new tab appears in transaction ME52N and ME53N but not in ME51N. What I need to do to make my new tab appear in ME51N? Also in ME53N, the fields that i added in my new tab is activated. How am I going to deactivated the fields if I am in display mode?
Kindly guide me on how to do this..

hi,
go to se80 tcode give the function group as XM02 ....in that u will find ur added screen 0111 ....and include
ZXM02TOP where u can declare ur sscreen fields here .
and in the flowlogic of the screen u will find PBO AND PAI.
here you can add the required modules for your logic.....
if you want to make the fields non editable in ME23N..
crearet a module under PBO which will ask u for new Z include create it and write code under
loop at screen.
end loop.
loop at screen .
if sy-tcode = 'ME23N'.
if screen-name = ' '.
screen-input = 0.
endif.
endif.
endloop.
try to check out the values in debugg mode.

Obrigatory Number Service on ME51N,ME52N,ME53N for company or plant

Staff
I wonder if it is possible to make the number of mandatory service as a company or plant in transaction ME51N and ME52N and ME53N.
I used trransação OLMSRV - Set Screen Layout but it makes the number of mandatory service for all the company's and plans.
Sorry for my english

>
Hi Sandipan, sorry for the late, I tried to manage this task but without success.
The user exit I'm working on in EXIT_SAPLBBPK_001.
FUNCTION EXIT_SAPLBBPK_001.
*"*"Lokale Schnittstelle:
*" IMPORTING
*"     VALUE(IM_BBPDECDATA) LIKE BBPDECDATA STRUCTURE BBPDECDATA
*"     VALUE(IV_MANU_PROF) TYPE MANPRC OPTIONAL
*" CHANGING
*"     VALUE(CH_PROFILE) LIKE T160EX-EPROFILE
INCLUDE ZXBBPU04.
ENDFUNCTION.
It includes ZXBBPU04, in which I have to understand if I'm working on a Purch. requisition in MODIFY mode or in CREATE mode.

Field in ALV for ME51N/ME52N/ME53N

Hi.
I want to include a field in the ALV of transactions for purchase requisitions. I have already enhanced the structure CI_EBANDB with the new fields, so the fields are already in MEREQ3211GRID.
What else I have to do to have this fields available in the ALV with the "Change Layout" option.
Thanks in advance.
Joaquin.

Hi.
I want to include a field in the ALV of transactions for purchase requisitions. I have already enhanced the structure CI_EBANDB with the new fields, so the fields are already in MEREQ3211GRID.
What else I have to do to have this fields available in the ALV with the "Change Layout" option.
Thanks in advance.
Joaquin.

SOS: Exit for ME51n/ ME52n/ ME53n/

hello erverybody,
at First i would like to implement the exit mm06e007 but i have no idea how to do it!!
have someone an example, coding or Tips,... ??
Second Problem :
how can I Overwrite the <u>Tapstrips name</u> using exit MEREQ001 ??
please i need a help!!
best regard
dani.

Exits are basically the hooks whcih SAP has provided to add your own code. There are two types of Exits:
1. Customer exits: Implemented as Function Modules within z includes. Anybody can change it and no access key is required.
2. User Exit: Implemented as subroutines within includes (any include except y or z includes). You need access for the specific include and then you can any subroutine (user exit) within that Include.
BADIs are the enhanced version of user exits where the same logic is implemented via classes and object (OOP)
Enchancement point is the latest once introduces with ECC6.0 . Not very sure about that but you can change it without any access key.
Please go through the following link which will help you understand the exits in a much better way:
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec07a25db911d295ae0000e82de14a/content.htm
http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
http://sap.niraj.tripod.com/id21.html
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
http://www.sap-img.com/ab038.htm
User Exits.
http://www.erpgenie.com/sap/abap/code/abap26.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
customer exits
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f1a7e790-0201-0010-0a8d-f08a4662562d
Menu Exit.
http://www.sappoint.com/abap/spmp.pdf
http://www.sappoint.com/abap/userexit.pdf
http://www.sapdevelopment.co.uk/enhance/mod_sapmenu.htm
http://www.sapdevelopment.co.uk/enhance/enhancehome.htm
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Rewards if useful.........
Minal

New columns in Enjoy Preq (ME51N/ME52N/ME53N) overview ALV

Hi all,
I want to add some new columns in the overview subscreen of the Enjoy Purchase Requisition transactions (ME21N/ME22N/ME23N).
I've added some fields on item level of the PReq, via the enhancement MEREQ001 (in the Customer include CI_EBANDB). I want to display these fields in the ALV, in each line, as last columns of the corresponding lines.
Can I do that?
Thank you,
Bogdan

You need to do some config in SPRO ( Xn )
MM --> Purchasing --> Purchase Req -->Define Scree Layout at document level.
Then just keep on clicking wherver you can . Bascially on the lines.
Then you need to do the config for the particular doc types / all the doc types.
The new field should be visible over there.
Field selection key
Determines, for the relevant purchasing document type, which attributes
    the fields of the purchasing document are to have.
Use
You maintain the field attributes for the relevant document in the step
    Define Screen Layout at Document Level.
The following field attributes are possible:
o   Must be maintained
o   Can be maintained
o   Hidden
o   Displayed only

Additional Data in Header Level for ME51N / ME52N / ME53N

Dear Gurus,
I have one requirement related to apply enhancement for additional fields in purchase requisition header level.
After searching a lot , I dint found any solution for this.
Does anybody have any solution for this.
Regards,
Shibashis.

I need to add on Tabstrip "Account assignment" for fields
CO Area and Cost Center text field description ( right side ) for each one.
How can I do this? Thanks in advance.

Screen exit MEREQ001- for Transactions ME51N/Me52N/ME53N

Hi,
I have implemented the Enhancement MEREQ001 to add a new tab for Purchase Requistion screen.
Requirement for me is to show the same data in the newly added tab for all line items and also to save the same data in EBAN table.
I am facing a problem while saving the data. In EBAN table, the data was saved for all line items. But the custom added field values are saved for only the line item displayed.
I ll explain with an example for better understanding.
I have created a PR with 2 line items ITEM1 and ITEM2
When i saved the data when ITEM1 is displayed, EBAN have custom added field values for ITEM1 but not for ITEM2.
The same way, if I save data when ITEM2 is displayed, EBAN has custom added field values for ITEM2 but not for ITEM1.
Now, my requirement is to get the both line items ITEM1 & ITEM2 updated with custom added field values in EBAN.
Has anyone faced this kind of issue.
Please reply back.
Regards,
Sreekanth.G

Hi,
Use BADI 'ME_PROCESS_REQ_CUST' to copy item 1 custom fields data to item 2 custom fields data.
Regards,
Hemanth

Enhancement in ME51n, ME52n, ME53n,

Similar Messages

Maybe you are looking for