Enhancement of data sources in CRM

Hi
Can anybody let me know step by step process how do we enhance the std content data sources in CRM system.
Thanks in advance.
Regards,
Kate.

hi Kate,
take a look these threads, should help a lot
Enhance CRM Extractor for BW
Enhancing DataSources in CRM
Enhance CRM Complaints Extractor
(oss note 850817-CRM-BW: Using BDocs for the enhancements in BADi)
hope this helps.

Similar Messages

Missing Source in Generic Data Source in CRM

Hi All,
Currently I am having an issue with a Generic Data Source in CRM. The consultants have actually build a data source by referring to the transparent table. I am not too sure how he did it.
Whenever I open up the transaction RSO2 to look at the data source, the "Extraction from DB View", "Extraction from SAP Query" and "Extraction by Function Module" is totally blank.
How would I know how does the consultant setup this extractor? Is there any other program that will have some kind of code to pull it from which transparent table?
Thanks.

Hi David,
Your datasource is based on "extraction using Function module". You need to check the function module SMOX3_GET_DATA in se37 and find the tables from where the data is fetched.
Also check this blog by Roberto to find the table and fields: /people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins
Bye
Dinesh

Data source for crm table CRMD_ORDERADM_I

hi experts,
could you please tell me the standard data source for crm table CRMD_ORDERADM_I ?
Thanks a lot!

Hi,
There would be many data sources based on this table CRMD_ORDERADM_I.
Example.
Opportunity Item Attributes - 0CRM_OPPT_ATTR_I
Bids - 0BBP_TD_QUOT_1
Depends What exactly are you looking for.
Regards,
Joe

Regarding Enhancing LO Data Source.

Hi is it possible to enhance LO Data Sources like 2lis_02_bf or 2lis_03_itm etc??

Hi Jayanth,
Yes, we can definetly do.. pls check the following links it would be of good help..
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
http://www.ko-india.com/content/weblogs/weblog_custom_fields_1.pdf
also take a look
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/59069d90-0201-0010-fd81-d5e11994d8b5
Enhancement
User exit
Re: Master data Enhancement Exit
Hope this helps..
Best Regards,
DMK
*Assign points if it serves your purpose...

Exits to enhance sd data source

Hi friends,
I want to know how to enhance sd data source through cmod?
Thanks.Your help will be appreciated.

Hi,
Make a search in SDN you can find similar cases also check the doc below.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0af763b-066e-2910-a784-dc6731660f46
Regards.

Can we enhance LO Data Sources

Can we enhance LO Data Sources with out own fields ?
Please let me know how if the field is not available in LBWE Enhancement Pool
thanks

Hi,
One of the note says that:
<i>
Add the required fields to the the SD communication structures using the Append method and use the LIS customer exits to fill the field.
           For information on enhancing the communication structures, see the documentation for the enhancements MCS10001, MCS50001 and MCS60001 (provided in transaction SMOD).
After you enhance the communication structures (for example MCVBAP), you can then enhance the extract structure (for example MC11VA0ITM) with the relevant field in the Customizing cockpit (transaction LBWE), provided that the comunication structure is available in the selection.
           To display a delta, you must make sure that you can determine the status in the user exit before and after the document change.
           This varies from case to case and depends on from which table the field is filled.
           For example, you may occasionally have to obtain the information from the internal document tables (such as xvbap and yvbap).
Refer to note 216448 for information on correctly populating the before and after image.
Another way of adding user-defined fields to extract structures is to enhance the document tables, for example, VBAK, VBAP, VBEP tc.
           The fields can be filled in the general sales user exits, the delivery or the invoice.
The fields added using an append are also available in the LogisticCustomizing Cockpit for enhancing the extract structures.
           With the latter procedure, bear in mind that the fields added to the document tables must be saved to the database with the information they contain.
           An advantage of this method is that there is no need for data retrieval in the LIS UserExit.</i>
With rgds,
Anil Kumar Sharma .P

How to enhance copa data source.

Hi,
I have to enhance copa data source 1_co_pa300beka_o01. Actually I have to add one field vstel from VBAP table to this data source.
Can you tell me full procedure about enhancing data source ?
It can not be done directly. I think i have to delete and re-create data source in R3 system.
For this i have to do all thing in KEB0 .
Am i right?
So please tell me full procedure to enhancing copa data source also tell me if i enhance copa data source , which type of problem can be come at BW side.
Thanks
Devesh Babu

I'm not sure if we can enhance CO-PA datasources. Even if you can enhance, whenever there are changes to the Operating concern in R/3 you would have to delete and re-create the datasource. While doing this you would have to re-do the appends again. DS 2lis_11_VAITM extracts data from VBAP. Check if the datasource already brings this field. Otherwise enhance it. In the CO-PA dataflow lookup the DSO which has VBAP data from the datasource and get the necessary field.
Other option is to ask functional folks to add the field to the CO-PA operating concern.

CRM 7.0 - Enhancement of Data Sources for interactive Reporting

Hallo All,
I would like to know whether anybody has positive experience with the enhancement of CRM Data Sources for interactive Reporting. I read that the enhancement of Customer fields should be possible (Those Data Sources below the Hierarchy node /CRMBW/ROOT).
I have seen that the extract structure can be enhanced via RSA6 (as for other data sources).
Questions:
1. Which USEREXIT / BADI has to be used to fill the added fields?
2. Does it work?
Best regards

Hi!
Those DS are not meant to be enhanced manually but only by one of the following two ways:
1. Adding custom fields with the Application Enhancement Tool (AET) in the CRM UI.
2. Adding SAP fields with the Interactive Reporting Enhancement Workbench (IREW).
The AET is available since CRM 7.0. Please find more details in the SAP Help Portal:
<http://help.sap.com>
    SAP Business Suite
        SAP Customer Relationship Mgmt.
             SAP EHP1 for CRM 7.0
                 Application Help
                     WebClient UI Framework
                         Application Enhancement Tool
The IREW is available since CRM 7.0 EhP1. More details can be found inside TX CRMD_IREW or in the SAP Help Portal:
<http://help.sap.com>
    SAP Business Suite
        SAP Customer Relationship Mgmt.
             SAP EHP1 for CRM 7.0
                 Application Help
                     SAP Customer Relationship Management
                         Analytics
Best regards

BW1 transaction for mapping newfield to data source in CRM

Hi,
This will be BW gurus working in the CRM Opportunity area.
Based on my current understanding I have copied the 0CRM_OPPT_H into ZCRM_OPPT_H and wanted to see whether I can map more partner function to map to the data source.
Currently, the following fields are offered by the SAP Delivered data source 0crm_oppt_h in CRM.
PARTNET FUNC    DATA source field     BDOC Mapping bwa1
IN CRM          0crm_oppt_h
Contact person   contact_person    PARTNER-PARTNER_NO
<NOT used>       EXECUTING_CC      PARTNER-PARTNER_NO
configured PF    COMPETITOR        PARTNER-PARTNER_NO
Emp responsible PERSON_RESP       PARTNER-PARTNER_NO
Sales Prospect   PROSPECT          PARTNER-PARTNER_NO
SALES_EMPLOYEE   Employee          PARTNER-PARTNER_NO
Currently we have configured 4 more partner functions for our opportunity transaction, which are not available in the 0CRM_OPPT_H data source. However we shall need these fields to send to BW.
How can we extend the mapping in BWA1 after extending/appending the extraction structure (CRMT_BW_OPPT_H) of the data source? Shall we continue to map these addition fields in the data source to PARTNER-PARTNER_NO as mentioned above? What puzzles us that this is header info and the PARTNER_NO is able to bring info for different partner func.. How this is being possible?
If we also map the same for the additional partner fields will we be able to aviod the BADI/User exit and the code associated that populated these fields?
What is the BKM? How the BWA1 can be used for Extending for more partrner( functions?)
Thanks
AGN

Hi Aswin,
while this is really helpful to enable me to dig into further, the basic question is not yet answered.
Currently the data source 0CRM_OPPT_H are able to extract the following partner data
contact person
prospect
channel pertner
empoyee responsible
However only one( contact person 00000017) is mentioned in our CRM system in the SPRO steps that you have shown.. My first question is how then the data source is able to get the other partner function....
2> Secondly even if I mention all the partner functions in that transaction( as you have mentioned) how do the data source really know where to populate which partner function data.. since the bdoc mapping is Partner-partne_no...
For example if I maintain the following in SPRO
00000017 contact person
00000026 emplyee responsible
How do the data source gets rightly populated ( contact person value in the contact_person field and vice versa).. when the BDOC Mapping for both these two fields are simply partner-partner_no?
Appreciate a detail explanation from you on this.
Thanks
AGN

Data Source for CRM Servies item 0CRM_SRV_PROCESS_I

Hello BI Experts,
When Extracting with 0CRM_SRV_PROCESS_I
with Transaction 'RSA3' in CRM System,
I'm not always getting the Product ID even though
I can see that Product id Exists in transaction CRMD_BUS2000116 - Maintain Service Processes ,
Please advice,
kobi

Hi,
Then triggered the initialization of delta without data transfer for data source -0CRM_SRV_PROCESS_I.
Request gets loaded into the target and is activated successfully?
if you ran info pack - init without data transfer then what you loaded to target?
But when I open the scheduler -> initialization options for source system, I could see that the initialization was not successful?
Mean is there any error?
You ran info pack - init without data transfer? then whats the info pack log says?
is it green status with 0 reocrds or red?
Delete old init if exist.
Re run info pack - init without data transfer and check it.
Thanks

Enhancing master data source.

Hi experts,
How to enhance an master data data source ( 0customer_attr ). Which function exit we need to use.
Is it EXIT_SAPLRSAP_001 or EXIT_SAPLRSAP_002 ?
Regards,
Nishuv.

hi fallow these steps
1. Go To SAP R/3 TCODE-RSA6
2. Open the SAP R/3 Tab & select the module & the masterdata extractor name for ex.MM -> MM-IO ->0VENDOR_ATTR
3. Double click on it. It will show you the extract structure name under "ExtractStru" as BIW_LFA1_S.
4. Double click on it or copy the name & open SE11 & paste the name open the structure.
5. There you can find append structure field name in ZZ. i.e all append structure fields should start with ZZ as prefix.
6. To find the source field you have to go to CMOD.
7. Provide the project name which is created.
8. Then select the "Enhancement components" option.
9. Click on display button.
10. Select the function exits "Exit_SAPLRSAP_002" it will open the include program "include zxrsau02".
11. Double click on "zxrsau02".
12.You will find the case program with datasource name.
13.Choose your master datasource & check the table names & the logic.

Help with Enhancing Export Data Source

Folks,
I have a scenario where the infocube is used an export data source
In the data source I realize that the 0customer is not available
I changed the extract structure of the datasource to include 0customer but I have still not got the 0customer as part of the datasource
Would appreciate help on how the datasource can be enhanced to include 0customer; pls note that the infocube does have 0customer
thanks for your time
regards

Hi,
Can you tell me which datasource you are using to extract the value for 0customer from R/3?
You check the data source for data ( For 0customer) by using the extract checker tcode rsa3.
You can also check for the datasources in r/3 by uising the tcode rsa6.
Hope this helps.
Regards,
K.Manikandan.

Enhancement of Data source

Hi All
After loading the data into an particular cube ,i would like to add some fields in the datasource & Cube also.How shall i do. i want steps & where to do(means T.CODE)? Give me an real time example how u have done ? Plz help me out.
Million Thanx
ajay

Hi Ajay,
usually you have to create an append on the extract structure in R/3 (SE11 or in RSA6...or directly in LBWE if this is possible) and then to fill it in a specific userexit. After done this you have to replicate your source system in BW and then you have to map your new field in the trasfer structure by assigning it to an infobject...insert this infobject in the cube, map it in the update rules and...that's all !!!
But, anyway, tell me what datasource are you using (there are many many specific different situation) and I will give you more useful detail !
Hope it helps (and please don't forget to assign some points by clickin'on the yellow star if the answer helped you) !
Bye,
Roberto

Enhancing the standard Data source without deleting setup tables

Hi all,
I am in the the Support Project. My requirement is I want to Enhance u201C2LIS_13_VDITMu201D LO- data source with two fields without disturbing the delta.
Please suggest me how I have to do this.
As Per my Knowledge ,
1. we have to delete setup tables
2. Enhance the data source & re populate the setup tables.
3. Delete the data in the cube & add the two new fields in the cube & repopulate the cube with new Initial .
4. after that delta will be enabled through job control.
But this process is not suitable for our requirement because delta was enabled long back it is going very smooth till date, I donu2019t want to disturb that process.
So please suggest me is there any other procedure to do this.
Thanks,
Kiran Manyam

Hi,
If historical data (loaded earlier in to BW) are not required for the two enhance field, then it is not required to deleted the setup table and reload them to BI.
In this case simply you can follow the following procedure.
1. Enhance the fields, and update the transfor structure(to unhide these fields). In BI update the required data target with respective IO. and in exit populate the enhance fields. No need to disturb the delta
2. Replicated the DS in BI and do the mappings in tranformation.
Here the existing delta is working, and you will be populating the two fields in the exit only.
Thanks,
Jugal.

Unable to view enhanced field in Data Source

Hi All,
We recently upgraded our R/3 system from 4.7 to ECC 6.0. Now when we are enhancing the data source, the field is visible in the Extract Structure. But we are unable to view it in the data source. We checked out in RSA2 the enhanced field attribute is specified as 'Field in OLTP and BW Hidden by SAP'. We have written code to modifiy the ROOSFIELD table to make the enahnced field visible. But this is the problem with all the data sources. Whenever, we have to enahnce, we have to go thru this process to make the enhanced field visible.
Is it like that we missied out any patch in ECC 6.0 while upgrade? If any person faced similar situation, please help us.

Hi Ravi,
I think you are missing a step here. As soon as you enhance your datasource with new fields, by default, those 2 check boxes are checked ( Hidden and Field in User exit only). You go to RSA6, edit your datasource and here, you can uncheck these added fields so that you can use them. You do not need to write any code to change the fields settings in ROOSFIELD table. Do the step I mentioned above after enhancing and you should be good. Hope it helps.
Thanks and Regards
Subray Hegde

Enhancement of data sources in CRM

Similar Messages

Maybe you are looking for