Enhancement Pack vs Support Release

HI,
We recently installed ERP 6.0 SR3 and are now being told to install Enhancement Pack 3. My understanding was that SR3 contained EH3 bundled within it so if you downloaded the latest installation you did not have to also do the enhancement pack. Am I correct in this understanding or will I still need to install Enhancement Pack 3?  What is the difference between SR3 and Enhancement Pack3?
Thanks
Edited by: Tom Brady on Nov 24, 2008 5:49 PM

SR3 implies a specific support package stack level, which is SPS 11 in this case.  OSS note 774615 contains details about the contents.  You would still need to install the Enhancement package separately as this adds new functionality that can then be activated.  A support stack include corrections and code changes that normally take effect immediately.

Similar Messages

  • Anywhere to find newly added countries in enhancement pack and support pack

    Our HR wants to proactively identify the new countries being introduced through enhancement pack and support pack, so configurations such as V_T503Z (country assignment for employee group/subgroup) can be updated accordingly.
    How can I find such a list?
    Thanks.
    Joan

    Hi Qiong
    If you have ever tried downloading the notes delivered under CLC or HRSP for SAP-HR Component, you would see that the sub-component names are generally based on country abbreviations example PY-AU, PY-SG etc. Also the country names are mentioned there. So if any new country comes up you would know it from the sub-component name. However, whether you need to configure anything in your system for these new countries depends on the fact whether your client has operations in that country or not and whether your project is supporting that country operations for the client or not.
    It is more likely that we keep checking the CLC and HRSP for any new functionalities introduced by SAP for the countries that we are supporting for the client instead of checking for new countries altogether.

  • Release 600, Level 11 (support pack SAPKGPAD11) vs Release 604, Level 03 (s

    Hi,
    We are moving into the SAP ECC enviroment and need to understand the difference between the 2 Support Packs Release 600, Level 11 (support pack SAPKGPAD11) vs Release 604, Level 03 (support pack SAPK-60403INEAAPPL).
    Can anyone give us an indication in terms of functionality what we should be looking out for? During the testing we already came across and issue regarding double invoicing but this was fixed with a OSS note.
    From a coding, functionality, intergration and process perspective,how do we know what the differences are? Is there a document that lists these difference as a quick comparison between the two releases.
    Thanks in advance

    Hi,
    There is lot of difference btween 2. ECC System with EHP4 (Release 604 Level 3), ECC package will be on 604 release and level represents the support pack level of 604 release. If your system is on this level then it means that your system is with Enhancement packages but if your ECC components are on release 600 then it is without Enhancement packages.
    Enhancement packages has been delivered a lot of new things like New GL etc. More information for what extra features ECC 6.0 with EHP4 has: can be checked on http://service.sap.com/erp-ehp.
    To take your system from 600 release to 604 release requires a lot of effort because you have to upgrade your system to bring at this release.
    Thanks
    Sunny

  • Release notes for Enhancement Pack 3

    Hello; when will the Release Notes for Enhancement Pack 3 be available? It is due to come out of rampup very soon and the Release Notes are usually provided then.
    Many thanks.
    Nick Taylor
    EDS SAP Practice EMEA

    Hi Nicholas,
    the release notes are now available:
    Financials:
    http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000698482&
    HCM:
    http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000698507&
    Operations:
    http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000698485&
    Corporate Services:
    https://websmp110.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000698636&
    Industries:
    http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000698506&
    You can also use the central starting point:
    http://service.sap.com/erp-ehp
    Best regards,
    Christian.

  • BI 7 Support Pack 10 official release date

    Hi
    Does anyone know when is BI7 Support Pack 10 officially released to the customers ?
    cheers,
    Anthony

    Hi Anthony,
    According to SAP's feedback, SPS10 is scheduled for release today (24-11).
    I have checked but it is not available yet.
    I suggest to check next Monday.
    I will also do so and feedback.
    Best regards,
    Olav

  • Enhancement pack for enterprise portal

    Hi,
    How do I identify the enhancement pack for enterprise portal?
    Also where is the information on the new features in the EHP 3 for portal listed?
    Thanks and Regards,
    Mahantesh

    Hi Mahantesh,
    Please remember that the Portal is part of the SAP NetWeaver, so all the improvements will be contained in the EhP for NetWeaver.
    I'd like to refer you to the SAP Enhancement Package 1 for SAP NetWeaver 7.0 page here in SDN
    at:
    SAP Enhancement Package 1 for SAP NetWeaver 7.0
    There you will get all the information about your request.
    It's very important to remark the following information:
    - This EhP for NetWeaver is not in General Availability, currently is in the RampUp phase, for more details you can check the RampUp page in the SAP Service Marketplace (login required) at: http://service.sap.com/rampup
    - Certain pre-requisites apply (like Support Packages)
    - To get this Enhancement Package you have two options, apply for the RampUp (you have to be in touch with your local subsidiary for details)  or wait for the official release. All the information about dates and procedures are fully mentioned in the links provided before.
    I hope you find this information useful.
    Kind Regards,
    Luis

  • Ramp-up enhancement pack 1 for 2007

    Hi All.
    Does anyone know where for find the ramp-up enhancement pack 1 for 2007.
    Thank you.

    Dear Jerusha,
    In case you are looking for the "SAP BUSINESS ONE 2007 A Featurepack 01" partners can find it as usual on [http://service.sap.com/sbo-swcenter|http://service.sap.com/sbo-swcenter]
    Navigate there to ->SAP BUSINESS ONE 2007 A FP01
    There is also written a note as follows, which should be highly considered:
    "Please note that SAP Business One Release 2007 A FP01 has only been released for Ramp-Up. Because of this, only approved projects for productive usage are supported by SAP Global Active Support Center. These projects will be supported during testing, going live and being live.
    Partners who are not participating in Ramp-Up are invited to submit their feedback via our dedicated support ticket component SBO-PRE-LEP. More detailed information for non-Ramp-Up participants can be found on the SAP Business One 2007 A - Central Information landing page.
    Kind regards
    Mario

  • ERP 6 Enhancement Pack 2 conflict with Add-on AFS 6.0

    I am installing ERP 6 Enhancement Pack 2 in IDES server which ERP 6.0 with add-on AFS 6.0 installed. I ecountered below error on ERP 6 Enhancement Pack 2 conflict with Add-on AFS 6.0 :
    Conflicts Between Add-On P3A V600 and other components
    Component
    Release
    Add-On Piece List
    Information on
    Conflict Resolution
    SAP_APPL
    602
    SAPK-602DDINSAPAPPL
    Unresolvable
    SAPK-602DFINSAPAPPL
    Unresolvable
    SAPK-602DOINSAPAPPL
    Unresolvable
    SAPK-602DRINSAPAPPL
    Unresolvable
    SAPK-602DWINSAPAPPL
    Unresolvable
    SAPK-602DZINSAPAPPL
    Unresolvable
    Pls advise.
    Thanks.
    Edward

    Hi Edward,
    in the Master Guides on http://service.sap.com/erp-inst, we recommend that you check the Add-On compatibity prior to installing the enhancement package. For Add-Ons you might need for instance separate "Conflict Resolutions", and should make sure that these are available. You contact the owner of this Add-On to find out more.
    If this topic is solved for an Add-On, but the issue still persists, it might be a support topic.
    (An Add-On in this sense is anything which you install in addition to the Standard SAP ERP. As the enhancement packages alter SAP ERP, the add-on might need to react. For SAP Add-Ons, this is done with conflict resolution transports)
    regards,
    Andreas R

  • Enhancement Pack for BRF plus

    Hi all,
    I would like to know which Enhancement Pack supports BRF plus perfectly, so that i can implement that enhancement pack to my server.
    Thanks,
    Straw

    Hi,
    BRFplus is supported as of EhP05. It's recommended to install the latest  NW 702  Support Package 10 (SAPKB70210)
    SAP is releasing BRF correction notes for specific issues, but at this version BRF+ is quite stable......
    Kind regards

  • Difference between service pack and support pack

    Hi,
    what is the exact difference between service pack and support pack. Are they same?
    The version details presnt in integration builder -> help-> inforamtion  of my XI server are as follows :
    Service pack: 09
    Release: 645_VAL_REL
    does it mean that the both support package and service package for my XI server are 09?
    thanks in adavance
    regards
    Jagruthi

    1. A service pack (in short SP) is a collection of updates, fixes and/or enhancements to a software program delivered in the form of a single installable package. Service packs are usually numbered, and thus shortly referred to as SP1, SP2, etc. It is notable that they may bring, besides bug fixes, entirely new features.
    http://help.sap.com/saphelp_nw04/helpdata/en/57/a21f407b402402e10000000a1550b0/frameset.htm
    Service packs in 2004 and 2004s;
    in 2004 - in 2004s
    SP12 & < - SP04 http://XI 3.0
    SP13 + 14 - SP05 http://PI 7.0
    SP15 - SP06
    SP16 - SP07
    SP17 - SP08
    SP18 - SP09 and so on...
    2) Support pack -
    http://help.sap.com/saphelp_nw04s/helpdata/en/9e/5bc53f3e0f0228e10000000a114084/frameset.htm
    For the ABAP parts of usage type PI, this is the implementation of support packages. For the Java parts, the deployment with the Java Support Package Manager (JSPM) is used.
    You can find currently available support packages on SAP Service Marketplace at service.sap.com/sp-stacks.
    A description of how to apply support packages is available in SAP Note 879289.

  • How to find the enhance pack in my current system

    Hi,
    We have upgraded from 4.6c to ECC 6.00. How to find out the enhancement pack of my current installation.
    Thanks in advance
    Raman

    Have a look into SPAM or System-Ststus
    Any component which is be release 6.01 or 6.02 or anything higher then release 6.00 is showing or not, if it is showing then youy EHP has been installed for that components otherwise no EHP is installed.
    Regards,
    Subhash

  • SRM 7. 0 with ECC 6.0 Enhancement Pack

    1) My client just upgraded their R/3 to ECC 6.0, but no Enhancement Pack.
    2) They are trying to upgrade from SRM 5.0 to SRM 7.0 in the near futures.
    3) During their first SRM phase, their scenario is limited to the following:
    a. R/3 RFQs are pushed to SRM via RFC call (custom program)
    b. SRM vendor logs in to see the RFQs and creates Quote
    c. SRM buyer evaluates the quotes
    4) Question: In order to run the above mentioned scenario without issues, is Enhancement Pack 4 a mandatory component for them, or can ECC 6.0 without any EnH support it already? If it's mandatory, which sub-components of the EnH 4 must be activated in order to support the scenario?
    5) Question: In their next SRM phase, they are trying to run scenarios like PPS and Doc Builder. In that case, is Enhancement Pack 4 a mandatory component?
    6) Last: Is there any SAP official documentation that maybe answers the question that I listed above?
    Thanks.

    Hello Jay,
    Please find the upgrade information:
    https://websmp206.sap-ag.de/upgrade-srm
    EhP4 is not mandatory for strategic sourcing, data transfer via RFC can be used.
    The benefit with EhP4 for your scenario will be new feature of "Collective Processing of purchase requistion" CPPR; where buyer can select the PReq line items on the portal & create RFx directly in the SRM system. All data transfer is via PI in this scenario.  Creating a RFQ in ECC is not a good idea, when you can leverage the RFx capabilities of SRM.
    New features: Blog:
    /people/michael.jud/blog/2008/09/10/srm-70-in-the-business-suite
    Official information :
    http://service.sap.com/srm click on SRM 7.0 external view
    Hope this solves.
    Thanks
    Ashutosh

  • Enhancement Pack

    Hi,
    Currently we are on release 700 with
    SAP_ABA - SAPKA70020,
    SAP_BASIS - SAPKB70020
    PI_BASIS - 2006_1_700
    SAP_BW - SAPKW70022.
    We would like to upgrade to Enhancement pack 4 on only BI systems and
    not other ERP systems, we would like to know what the chanllenges are
    and is it possible for only BI system being on EHP4 and not other
    systems?
    Thanks,
    Arvind

    Hi,
    As such there will be no issue if BI will be on EHP1 and ECC will not be on enhancement package. But as per my experience, you should have both system on Enhancement Package i.e. BI on EHP1 and ERP on EHP4 level.
    Thanks
    Sunny

  • Enhancement Pack 3 updated Warehouse Numbers with an entry for MLO

    Hello all,
    I am working with a supply chain team, and after the installation of enhancement pack 3, a new warehouse number appeared in the tables.
    Warehouse number MLO.
    None of us can explain it, but the change log lists an SAPK-603DINT object delivered via SAP transport.
    Any thoughts on where the warehouse number came from, or why it got delivered?

    Hi
    Without having looked into the special table entry:
    This term appears in the Online Support System mainly for the functional area "(Extended) Warehouse Management".
    Following the Master Guide for the SAP ERP 6.0 Enhancement Package 3 (among others) developments were made in the SAP Industry Scenario "SAP for Wholesale Distribution - Warehouse Management".
    Following the enhancement package overview presentation https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80b79088-d508-2b10-b497-b1628cb84166 differnet developments in "warehousing", were done in the SAP ERP Core as well.
    If you check out which Business Function you are using (i.e. LOG_MM_CI_2 includes some of these enhancements) you should be able to find out more (see for instance the Business Function documentation in help.sap.com)
    regards,
    Andreas R

  • New/enhanced datasources in ERP 60 enhancement packs

    Hi,
    I have reviewed a lot of the online documentation on Service Marketplace and SDN, but still have the following open question:
    Is there a comprehensive list of all new SAP ERP datasources, or enhancements to existing datasources, that are available in ERP 60 enhancement packs 1, 2, 3 and 4? 
    Where can I find this list? 
    Again, I'm aware of the wealth of documentation on EHPs, but I can't seem to find a quick list of the BI datasource changes for EHPs.
    Thx,
    Lonnie

    Hi Lonnie:
          Take a look at the Documentation for SAP NetWeaver BI Content Add-On.
    http://help.sap.com/content/documentation/netweaver/docu_nw_bi.htm
    Here you can find the details for the new DataSources released on each Add-On:
    Release Notes SAP NetWeaver 7.0 BI Content Add-On 4, SP 03
    http://help.sap.com/saphelp_nw70/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
    Release Notes SAP NetWeaver 7.0 BI Content Add-On 4
    http://help.sap.com/saphelp_bic704/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
    Release Notes for
    SAP NetWeaver 7.0 BI Content Add-On 3 SP09
    SAP NetWeaver 7.0 BI Content Add-On 3 SP08
    SAP NetWeaver 7.0 BI Content Add-On 3 SP06
    SAP NetWeaver 2004s BI Content Add-On 3 SP04
    SAP NetWeaver 2004s BI Content Add-On 3 SP02
    SAP NetWeaver 2004s BI Content Add-On 3
    SAP NetWeaver 2004s BI Content Add-On 2
    http://help.sap.com/saphelp_bic703/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
    Release Notes BI Content 3.5.3 Add-On SP02
    Release Notes BI Content 3.5.3 Add-On
    http://help.sap.com/saphelp_nw04/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
    Regards.
    Edited by: Francisco Milan on Sep 23, 2009 10:42 PM

Maybe you are looking for