Enhancement-Point in ECC6 Issue

Hi all,
We recently did an Technical Upgrade from ECC5 to ECC6.
After the Upgrade, during the Syntax Check in one of the custome reports we developed, we are getting an error "The statements ENHANCEMENT-SECTION and ENHANCEMENT-POINT (without the STATIC addition ) can only be used in executable coding".
When I checked, i found that this comes from a standard include I_RFIDYYWT_FICA_SEL which is called inside out custom report. There is an Enhancement-Point without the STATIC addition and this is resulting in this issue.
Coudl you please let me know whether there is any way by which we can deactivate this Enhancement-Point or is there any other solution to over come this issue.
Many thanks in advance,
Regards,
Anoop R.S

Hi,
to find the user exits & Badi's for the T-code..
go to table TSTC>enter T-code and execute> get the Program for the t-code..
and go to-se38-->get the package attached to the t-code..
next go to t-code Se15>expand the enhacement tab>enter package under userexit and
                                                     execute you will get the list of exits
                                                     available...
                                                  -->enter package under Badi's tab and
                                                     execute you will get the list of Badi's
                                                     available...
All the User exits are stored in Table MODSAP..
Implemeting User-exit..
go to t-code smod -->enter the Exit name --> click on display --> click on components
                                                                  --> clcik on Finction module
                                                                  --> click on include under function module
                                                                   --> it show warning message ignore that and hit enter and write the code
and activate again the SMOD..
Prabhudas

Similar Messages

Enhancement points in ECC6.0

Hi Friends,
can anyone please share the documents related to enhancement points (spots) in ECC 6.0?
Regards,
Ravi.

Enhancement points - Changing standard SAP code using the implict and explicit enhamcement points
Enhancement points are basically hooks at certain defined points within the ABAP code i.e. at the beginning and end of a FORM. These hooks allow you to attach your own custom code which will be executed as if it had been hard coded into the code using a modification. Unlike hard coded modifications these will not be lost during upgrade or patching exercises.
There are 2 types of enhancements with the enhancement framework:
1. Explicit enhancement points: These are basically hooks already coded into the program by SAP at various points of the code. See program RIAUFMVK for examples of these! These are very easy to implement simply go into enhancement mode of SE80 and right click on the enhancement point where you want to add your code and choose u2018Enhancement Implementation->Createu2019 Give it a name, description and assign it to a change request (should not be a Z package) and then simply add the code as normal.
2. Implicit enhancement points: These are basically points within ABAP code where an enhancement point is implied, and in which case can be created. Examples of implicit enhancement points are at the beginning and end of FORMu2019s, at the end of a program, include or function module etc. Click here for demonstration of how to implement an implicit enhancement point!
Search for enhancement in sdn you will get demo also.

Program related ENHANCEMENT-POINT/SECTION with the name LMEPOF8D_02 exists

Hello
In an upgrade, after finishing with the SPAU task we got the following error in the standard object LMEPOF8D:
A program related ENHANCEMENT-POINT/SECTION with the name "LMEPOF8D_02" already exists.
Anyone knows which cause could be generate this kind of error?
Thanks in advance for your help
Best Regards,
Leonardo

Hello Sandra,
We have finished with SPAU. Regarding LMEPOF8D include, we kept with the ECC6 standard code. Therefore, from a point of view of code, it should be ok. However, we have this sintax error.
As you said, the include contains the enhancement point LMEPOF8D_02 which generates the sintax error, but we couldn't find if this enhancement is used in another place.
We also found note 1331844 and tried to fix the issue by using the 2nd solution propose in the note. But, it didn't work neither.
Do you have any idea about what cause could generates this error?
Thanks in advance for your support.
Best Regards,
Leonardo

Enhancement points option: Function modules or BADI

Hi, I am on ECC 6.0 and I need to validate and set some requirement in customer sales area data when user input the document output message in Documents tab strip screen 7003 of sapmf02d in transaction XD01 or XD02.
I found that there is function module EXIT_SAPMF02D_001 that I probably can use to create an implicit enhancement point to validate table T_KNVD or I can use BADI customer_add_data. Can someone suggest which way is better and why? I am new to this so could someone show me screen by screen on how to create and implement BADI.
I am confusing about should I create a ZBADI or using existing BADI customer_add_data. If I use existing BADI how can I add my own method with my own code.
Thanks.

Thanks. Could you explain to me how does the custom BADI get call to execute my code? Say
I have a customer document screen 7326 (Customer Master Subscreen SD Documents in program SAPMF02D). What I want is when user click save, I want to do some validation on the output message that they enter and issue some warning or error messages.
I am on ECC 6.0 so I can create a BADI from Enhancement spot not from SE18. SAP has a BADI called CUSTOMER_ADD_DATA with class CL_EX_CUSTOMER_ADD_DATA and interface IF_EX_CUSTOMER_ADD_DATA.
When I create a ZBADI_CUST, which interface class I put in the IF_EX_CUSTOMER_ADD_DATA
or a ZIF_EX_XX so that I can create my own method? How does the BADI get called when I am in transaction XD02 and click the save button? Could you kindly show me step by step the procedure.
Thanks.

How can I get the Microsoft enhanced Point and Print compatibility driver installed on Win7 LC master?

We recently migrated from a Windows Server 2003 to Windows Server 2012 print server. When recomposing a linked clone pool with the old 2003 server, drivers were taken care of for the printer when the user printed for the first time after desktop recompose. With 2012, any printer using the Point and Print driver doesn't seem to obtain the driver again from the 2012 server. All of our clients are running Windows 7 which means the Microsoft enhanced Point and Print compatibility driver is not installed in the OS natively.
I apparently need to figure out a way to get this installed on the host image so it trickles down to snapshots when recomposing the linked clone pool but I haven't been able to dig much information on doing this. Does anyone out there have any insight on how to accomplish this? If I recompose a pool now for a user who is using a new Point and Print driver, they get the following message that is resolved by removing the printer from their account and re-adding it:
"The 'Microsoft enhanced Point and Print compatibility driver' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
I figured the easy solution would be to just install a printer using the Point and Print driver and then remove it...leaving the driver behind (unless it cleaned up after itself). The problem with this is in my testing, even after removing and re-adding a printer that set off installation of this Point and Print driver on the client, any other printer that was using it still required the remove/re-add process in order to work, else I got the same message. That tells me that the driver may be custom for each printer installed?
Color me a little confused. I do NOT like the way that Server 2012 handles printers. I've come across a few other issues as well (such as duplex capabilities not being remember on the print server for a printer) that I never had with the 2003 server.
Thanks!!

I was able to get it to work using your instructions off of here and your other thread
Thank you!
Chris
http://social.technet.microsoft.com/Forums/en-US/864553c2-c8ff-49d2-bd48-eb7b47381111/windows-2012-print-server-problem-with-xp-clients?prof=required

User Exit/BADI/Enhancement Point in VF01 before new document no assignment

Hi Expert,
I am looking for a user exit/BADI/Enhancement point which will trigger in VF01 before the new document no (Billing document no assign).
I need to cross check few things in Billing via VF01 at billing document save and give error message accordingly. The problem is if new number assign and there is error due to my code then when user save the document next he get a new no. its mean a no skip.
Example: The invoice no is 1000. User start creating a billing document with Vf01 and he get an error message due to my code at exit , at this point of time the next number assign to billing which is 1001 but document not save due to my error message. Now after applying correction user save data and billing document created with no 1002. So there is no skip.
I tried BADI BADI_SD_ACCOUNTING but this will trigger after no assignment. Can someone provide me a user exit/BADI/Enhancement point in VF01 which trigger before no range assignment and contain at least Billing header data to use in my code?
Regards
Swati
Edited by: Swati Namdev on Nov 16, 2010 9:55 PM

HI Brad and team,
BRED is right. I check few user exit normally all of us have that list or easily available on net.
BRED: my question is: I need to check the billing date VBRK-FKDAT of document should not be less than the sales order plan billing date VBAP-Oldate.
If this check fail then won't allow the user to create billing document. The problem is I used one user exit SDVFX001 already define previously that's work fine but issue is that user exit trigger after the billing no assignment. That's why when user get that error message he correct the document and create billing this time he get a new number which is skip of one no.
That why I need a User Exit/BADI/Enhancement Point which trigger at save but before document no assignment.
Please update more about your comment "Why not use a header level copy requirement routine to perform the checks and log the messages? This is the standard process." .
Suggest user exit USEREXIT_FILL_VBRK_VBRP trigger before save. I need at save the reason is VBRK-FKDAT this can be change.
Feel free to contact me back if you need more clarification.
Regards
Swati
Edited by: Swati Namdev on Nov 17, 2010 6:22 PM
Edited by: Swati Namdev on Nov 17, 2010 6:25 PM
Edited by: Swati Namdev on Nov 17, 2010 6:32 PM
Edited by: Swati Namdev on Nov 17, 2010 6:47 PM

Copying function module & program with all ENHANCEMENT-POINT

Guyz,
i'm on ecc6.0 and want to copy a standard report and FM with all its enhancement points. Can i do ? Kindly let me know how to do the same ?
Thanks

Hi,
Enhancement frame work is the new concept using which SAP allows you to change the existing programs
See the following blogs that talk about the same in detail
/people/thomas.weiss/blog/2006/01/24/what-the-new-enhancement-framework-is-for-150-its-basic-structure-and-elements-for-beginners
/people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
/people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
Check the theard also
https://forums.sdn.sap.com/click.jspa?searchID=3456104&messageID=2839972
Reward points
Regards

Enhancement point is not processed in Q-System

We are using SAP SCM 7.0, based on NW 7.0 EhP 1.
In the development system we created a new enhancement point (implicit) where everything works fine.
After transport to Q system no enhancement point is processed although the coding is there and listed as 'active'.
BAdI implementations are processed, though.
Do you have a general advise what could be wrong?
We don't have a switch for this Z enhancement.
Thanks,
Michael

Hi Michael, 
 
I haven't encountered this problem yet, but there's reports in the forum that another activation helped, e.g. see this thread Implicit Enhancement Code not wrking after transport (and if you do a search you'll find more reports like that). People, who encountered this issue, seem to usually say that during debugging the enhancement code doesn't show up, though in the editor it is visible and marked as active. 
 
Cheers, harald

Enhancement point in FM RV_INVOICE_DOCUMENT_ADD not updating ZUONR

Hi,
I am working with FM RV_INVOICE_DOCUMENT_ADD.
inside the FM, I have an enhancement point rv_invoice_document_add_15 SPOTS es_saplv60a.
Here I am setting the value of ZUONR by a custom value. This perhaps should update table VBRK for the corresponding VBELN.
however, it is not updating..
This is my code....
zvbrk ] = xvbrk [.
sort zvbrk by zukri.
sort xvbrk by zukri.
loop at zvbrk into k_vbrk.
l_index = sy-tabix.
k_VBRK-ZUONR = k_vbrk-zukri.
k_vbrk-updkz = 'U'.
modify xvbrk index l_index from k_vbrk transporting zuonr updkz.
endloop.

Hi,
Can you tell that how had you solved this issue?
Thanks

Enhancement Point in MIRO transaction

Hi all,
Can anyone let me know the enhancement point in t-code MIRO before saving the document. Plz let me know if there is any enhancement spot.. plz help me out in this issue.
Thanks in advance.

hi
good
Following user exits are present in MIRO
LMR1M001 User exits in Logistics Invoice Verification
LMR1M002 Account grouping for GR/IR account maintenance
LMR1M003 Number assignment in Logistics Invoice Verification
LMR1M004 Logistics Invoice Verification: item text for follow-on docs
LMR1M005 Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006 Logistics Invoice Verification: Process XML Invoice
MRMH0001 Logistics Invoice Verification: ERS procedure
MRMH0002 Logistics Invoice Verification: EDI inbound
MRMH0003 Logistics Invoice Verification: Revaluation/RAP
MRMN0001 Message output and creation: Logistics Invoice Verification
thanks
mrutyun^

Enhance option in ECC6.0

Hi Experts,
Can somebody explain me the purpose of "Enhance button" (Shift + F4) in the ABAP Editor (SE38); prefrably with a small example.
Any helpful entry will be rewarded.
Warm regards,
Raman.

Enhancement spots are provided ECC6.0 onwards for making enhancements directly into the code provided by SAP without using user-exits / BADIs.
Use Change Mode for creating enhancement points & sections.
use button Display <-> Change to switch to change mode.
Use Enhancement Mode for creating enhancement implementations.
use button Change Enhancements to switch to Enhancement mode
use button Display <-> Change to leave Enhancement mode

Enhanced Point & Print compatibility driver in Windows 7

Hi all,
are admin permission needed to install the enhanced Point & Print compatibility driver in Windows 7? The print server is running Windows 2012R2 and the driver type for the printer is V4.
When a user (non admin) tries to add that printer, a dialog box pops up and asks for trust. Is this the default behaviour?
Many thanks!
Nils

Hi Nils,
Would you please let me know whether add a network printer via
Add a printer wizard, then encounter the issue (ask for trust)? Or do any other operation? Just a confirmation, thanks for your understanding.
Please also refer to following articles and check if can help you.
Printer Sharing Technical Details
Configure Print and Document Services
Assign Delegated Print Administrator and Printer
Permission Settings in Windows Server 2012
If anything I misunderstand or any update, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Pleassss i want to know bi 7 supporting project point or production issue

Hi expert,
i am pradeep .a job seeker could pleassss help me. i want to know bi 7 supporting project point or production issue and in bi 7 what are role in production project .shore to assign point my id is [email protected]
thanks&regards
pradeep.k

Hi,
It may vary in different projects.
I can just give you a couple of general roles in Support project
Data Load Monitoring:
1.Carried out data load on a daily, weekly and monthly basis using Process chains from both SAP Source systems as well as Non-SAP Source systems such as Informatica.
2.Resolving Data load error such as Invalid characters, Time period conversion, Currency conversion, Duplicate records, etc
3.Ensuring the availability of the updated data in the datatarget on time.
4.Spooling out data through Infospoke from SAP BW to systems like Trillium, Ariba (Reporting Tool)
Ticket Resolution:
1.Process chain modification: Working on Optimizing Process chain by creating new process chain considering the load dependencies.
2.Reloading of R/3 data from different clusters Reconciliation issues
3.Enhancements as per Business requirement.
Additional responsibilities:
Preparing design documents from the Business Requirement docs and identified the relevant data targets for satisfying the customer requirements.
Creation of Operational manual: BW Run & Maintain Support.
Process Chain Detail Documentation (Sequencing & Dependency within Local Chains).
Monitoring checklist Document (From Process Chain Perspective)
BW Doc checklist preparation
Table space activity with basis team.
Data load analysis taking into account the CPU utilization.
Applying Support packs and performing ORT.
Refer
Roles & Responsibilities for Junior & Senior consultants(Technical)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/08f1b622-0c01-0010-618c-cb41e12c72be
Production and Implementation
/message/4755150#4755150 [original link is broken]?
hope this helps,
Thanks,

Sap support for standard prog. w/ custom implem of implicit enhanc.points

Hello,
since 1 year I've been confronted to SAP customers which WIDELY implement Implicit Enhancement Points (IEP).
I have been really surprised that my customers undoubtly think, if a problem occurs in a standard program where there are lots of IEP custom implementations, and if my customers estimate after investigation the problem comes from the standard part and not from the IEPs, they think that SAP support would help them to solve the issue.
Note: as a consequence, they created much more IEP in ECC 6 than they did in the past with R/3 old releases (via changes of the standard, aka repairs)!
What I think, is that SAP SUPPORT WOULDN'T HELP them as long as there is custom code (even within IEPs) in the standard program, even if there is only one IEP with one line (because it could change completely the standard algorithm, for example by emptying a global internal table)
So, I think the only way to get help from SAP is to deactivate these IEP implementations before requesting support. And so, the only solution to deactivate them, customers MUST assign IEP implementations to a package and then to a switch and then to a business function, so that they can deactivate it via switch framework.
The main concern is that my customers didn't create switch/business function, so they cannot react quickly if a problem happens in production : reproduce in test system, deactivate custom IEPs by switching off business function (it's what they didn't do), reproduce with full standard to determine problem comes from standard, request help from sap).
Could you share with me what is your approach about implementing IEPs, and maybe, is there somewhere a SAP documentation which explains that officially?
I hope I was clear.
Thank you very much for your kind help.
Best regards,
sandra rossi

I played around a bit with this (as I had never done it before) and also from what I have read, the intended option is the switch framework.
I guess as plan B you could have a virtual system or reliable test environment in which you can disable the enhancement and bring it back again via version management - but from what you have described (IEP deleting gobal variables, etc) this would also remove the "bug" and make the problem difficult to reproduce.
Perhaps the next best thing (unless someone has a better idea) is to inform your customers about neatly organizing their software developments using packages and switches.
To my knowledge, the syntax checks are also getting stricter in this area (as you may have noticed) and I hope that (for some of them) will throw errors one day during the development stage already.
Sorry, that does not help you much (but at least you read "the rules"
Cheers,
Julius
ps: A dirty way of doing it would be to run the program in the new debugger, and skip over the enhancement using the Go-To function. Unlike the classic debugger, the code inbetween does not need to be debugged. Ugly, but effective...
Edited by: Julius Bussche on Nov 10, 2008 9:13 PM

Difference between implicit and explicit enhancement points

Hi Folks,
I had learned many documents to findout the difference between explicit and implicit enhancement point.I got the theoritical knowledge on that but losing on the practical side..
Can anybody help me out with one real time scenario where the explicit enhancement points have been implemented and the step by step procedure to implement it..
Hoping for the positive response from you..
Regards,
Rohan.

Hi Rohan,
In implicit they are available at the beginning of subroutines defined in the standard reports.
Edit-> Enhancement operations->show implicit enhancement options.
This will highlight all the implicit enhancements in the report.
In Explicit enhancement we have two different types of enhancements -
Enhancement point and Enhancement section.
Enhancement point - SAP has some standard functionality defined for a report , but it may be required that you'll need to add your own code. In this case the code that you'll add will be executed along with the standard code.
Enhancement section - SAP has its standard functionality defines but it may not suit your requirement, in that case you may need to add your code and you'll need that code to be executed only. By this method the existing code is automatically commented and a copy of the same code is available to edit.
After executing the report only your code will be executed and the standard code will be bypassed.
For Practicle implementation, follow this link.
Link : [http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb54c452-0801-0010-0e84-a653307fc6fc]
i hope it will give you some clear picture....
Thanks.
Anurag

Enhancement-Point in ECC6 Issue

Similar Messages

Maybe you are looking for